Heterostructures of NiFe LDH hierarchically assembled on MoS2 nanosheets as high-efficiency electrocatalysts for overall water splitting

Construction of unique NiCoP/FeNiCoP hollow heterostructured ellipsoids with modulated electronic structure for enhanced overall water splitting

Transition metal phosphides have been demonstrated to be promising non-noble catalysts for water splitting, yet their electrocatalytic performance is impeded by unfavorable free energies of adsorbed intermediates. The achievement of nanoscale modulation in morphology and electronic states is imperative for enhancing their intrinsic electrocatalytic activity. Herein, we propose a strategy to expedite the water splitting process over NiCoP/FeNiCoP hollow ellipsoids by modulating the electronic structure and d-band center. These unique phosphorus (P) vacancies-rich ellipsoids are synthesized through an ion-exchange reaction between uniform NiCo-nanoprisms and K3[Fe(CN)6], followed by NaH2PO2-assisted phosphorization under N2 atmosphere. Various characterizations reveals that the titled catalyst possesses high specific surface area, abundant porosity, and accessible inner surfaces, all of which are beneficial for efficient mass transfer and gas diffusion. Moreover, density functional theory (DFT) calculations further confirms that the NiCoP/FeNiCoP heterojunction associated with P vacancies regulate the electronic structures of d-electrons and p-electrons of Co and P atoms, respectively, resulting in a higher desorption efficiency of adsorbed H* intermediates with a lower energy barrier for water splitting. Due to the aforementioned advantages, the resultant NiCoP/FeNiCoP hollow ellipsoids exhibit remarkably low overpotentials of 45 and 266 mV for hydrogen and oxygen evolution reaction to achieve the current densities of 10 and 50 mA cm-2, respectively. This work not only reports the synthesis of a hollow double-shell structure of NiCoP/FeNiCoP but also introduces a novel strategy for constructing a multifunctional electrocatalyst for water splitting.

Synthesis and Electrocatalytic Applications of Layer-Structured Metal Chalcogenides Composites

Featured with the attractive properties such as large surface area, unique atomic layer thickness, excellent electronic conductivity, and superior catalytic activity, layered metal chalcogenides (LMCs) have received considerable research attention in electrocatalytic applications. In this review, the approaches developed to synthesize LMCs-based electrocatalysts are summarized. Recent progress in LMCs-based composites for electrochemical energy conversion applications including oxygen reduction reaction, carbon dioxide reduction reaction, oxygen evolution reaction, hydrogen evolution reaction, overall water splitting, and nitrogen reduction reaction is reviewed, and the potential opportunities and practical obstacles for the development of LMCs-based composites as high-performing active substances for electrocatalytic applications are also discussed. This review may provide an inspiring guidance for developing high-performance LMCs for electrochemical energy conversion applications.

Generic heterostructure interfaces bound to Co9S8 for efficient overall water splitting supported by photothermal

The increase of reaction temperature of electrocatalysts and the construction of heterogeneous structures is regarded as an efficient method to improve the electrocatalytic water splitting activity. Here, we report an approach to enhance the local heat and active sites of the catalyst by building a heterostructure with Co9S8 to significantly improve its electrocatalytic performance. The as-fabricated Co9S8@Ce-NiCo LDH/NF electrode possesses a notable photothermal ability, as it effectively converts near-infrared (NIR) light into the local heat, owing to its significant optical absorption. Leveraging these favorable qualities, the prepared Co9S8@Ce-NiCo LDH/NF electrode showed impressive performance in both hydrogen evolution reaction (HER) (η100 = 144 mV) and oxygen evolution reaction (OER) (η100 = 229 mV) under NIR light. Compared to the absence of the NIR light, the presence of NIR irradiation leads to a 24.6 % increase in catalytic efficiency for HER and a 15.8 % increase for OER. Additionally, other dual-functional electrocatalysts like NiCo-P, NiFeMo, and NiFe(OH)x also demonstrated significantly enhanced photothermal effects and improved catalytic performance owing to the augmented photothermal conversion when combined with Co9S8. This work offers novel pathways for the development of photothermal-electrocatalytic systems that facilitate economically efficient and energy-conserving overall water splitting processes.

Heterostructured MoO3 Anchored Defect-Rich NiFe-LDH/NF as a Robust Self-Supporting Electrocatalyst for Overall Water Splitting

The rational design of inexpensive metal electrocatalysts with exciting catalytic activity for overall water splitting (OWS) remains a significant challenge. Heterostructures of NiFe layered double hydroxides (NiFe-LDHs) with abundant oxygen defects and tunable electronic properties have garnered considerable attention. Here, a self-supporting heterostructured catalyst (named MoO3/NiFe-NF) is synthesized via a hydrothermal method to grow NiFe-LDH with oxygen vacancies (OV) in situ on inexpensive nickel foam (NF). Subsequently, MoO3 is anchored and grown on the surface of NiFe-LDH by electrodeposition. The obtained catalysts achieved outstanding oxygen/hydrogen evolution reaction (OER/HER, 212 mV/85 mV@10 mA cm-2) performance in 1 m KOH. Additionally, when MoO3/NiFe-NF is utilized as the cathode and anode in OWS, a current density of 10 mA cm-2 can be obtained as an ultralow battery voltage of 1.43 V, a significantly lower value compared to the commercial electrolyzer incorporating Pt/C and IrO2 electrode materials. Finally, density functional theory (DFT) calculations and advanced spectroscopy technology are conducted to reveal the effects of heterojunctions and OV on the internal electronic structure of the electrical catalysts. Mainly, the present study provides a novel tactic for the rational design of remarkable, low-cost NiFe-LDH electrocatalysts with heterostructures for OWS.

Boosting Efficient Alkaline Hydrogen Evolution Reaction of CoFe-Layered Double Hydroxides Nanosheets via Co-Coordination Mechanism of W-Doping and Oxygen Defect Engineering

While surface defects and heteroatom doping exhibit promising potential in augmenting the electrocatalytic hydrogen evolution reaction (HER), their performance remains unable to rival that of the costly Pt-based catalysts. Yet, the concurrent modification of catalysts by integrating both approaches stands as a promising strategy to effectively address the aforementioned limitation. In this work, tungsten dopants are introduced into self-supported CoFe-layered double hydroxides (LDH) on nickel foam using a hydrothermal method, and oxygen vacancies (Ov) are further introduced through calcination. The analysis results demonstrated that tungsten doping reduces the Ov formation energy of CoFeW-LDH. The Ov acted as oxophilic sites, facilitating water adsorption and dissociation, and reducing the barrier for cleaving HO─H bonds from 0.64 to 0.14 eV. Additionally, Ov regulated the electronic structure of CoFeW-LDH to endow optimized hydrogen binding ability on tungsten atoms, thereby accelerating alkaline Volmer and Heyrovsky reaction kinetics. Specifically, the abundance of Ov induced a transition of tungsten from a six-coordinated to highly active four-coordinated structure, which becomes the active site for HER. Consequently, an ultra-low overpotential of 41 mV at 10 mA cm-2 , and a low Tafel slope of 35 mV dec-1 are achieved. These findings offer crucial insights for the design of efficient HER electrocatalysts.

The dual built-in electric fields across CoS/MoS2 heterojunctions for energy-saving hydrogen production coupled with sulfion degradation

Substituting the sluggish oxygen evolution reaction with the sulfur oxidation reaction can significantly reduce energy consumption and eliminate environmental pollutants during hydrogen generation. However, the progress of this technology has been hindered due to the lack of cost-effective, efficient, and durable electrocatalysts. In this study, we present the design and construction of a hierarchical metal sulfide catalyst with a gradient structure comprising nanoparticles, nanosheets, and microparticles. This was achieved through a structure-breaking sulfuration strategy, resulting in a "ball of yarn"-like core/shell CoS/MoS2 microflower with CoS/MoS2/CoS dual-heterojunctions. The difference in work functions between CoS and MoS2 induces an electron polarization effect, creating dual built-in electric fields at the hierarchical interfaces. This effectively modulates the adsorption behavior of catalytic intermediates, thereby reducing the energy barrier for catalytic reactions. The optimized catalyst exhibits outstanding electrocatalytic performance for both the hydrogen evolution reaction and the sulfur oxidation reaction. Remarkably, in the assembled electrocatalytic coupling system, it only requires a cell voltage of 0.528 V at 10 mA cm-2 and maintains long-term durability for over 168 h. This work presents new opportunities for low-cost hydrogen production and environmentally friendly sulfion recycling.

Interfacial Interaction in NiFe LDH/NiS2/VS2 for Enhanced Electrocatalytic Water Splitting

A bifunctional electrocatalyst with high efficiency and low costs for overall water splitting is critical to achieving a green hydrogen economy and coping with the energy crisis. However, developing robust electrocatalysts still faces huge challenges, owing to unsatisfactory electron transfer and inherent activity. Herein, NiFe LDH/NiS2/VS2 heterojunctions have been designed as freestanding bifunctional electrocatalysts to split water, exhibiting enhanced electron transfer and abundant catalytic sites. The optimum NiFe LDH/NiS2/VS2 electrocatalyst exhibits a small overpotential of 380 mV at 10 mA cm-2 for overall water splitting and superior electrocatalytic performance in both hydrogen and oxygen evolution reactions (HER/OER). Specifically, the electrocatalyst requires overpotentials of 76 and 286 mV at 10 mA cm-2 for HER and OER, respectively, in alkaline electrolytes, which originate from the synergistic interaction among the facilitated electron transfer and increasingly exposed active sites due to the modulation of interfaces and construction of heterojunctions.

Fe-Based Metal Organic Framework-Derived FeNiP/N-Doped Carbon Heterogeneous Core-Shell Structures for Oxygen Evolution

It is of great significance to explore high activity, low overpotential, and outstanding durability electrocatalysts without precious metals for oxygen evolution reaction to reduce the energy consumption in the electrolysis of water to product hydrogen. Metal organic frameworks (MOFs) with periodic structure and uniform pore distribution have been widely used as precursors for the synthesis of transition metal electrocatalysts. Herein, we first synthesized nanoscale Fe-soc-MOFs with relatively high specific surface area and in situ converted it into nickel-iron double layer hydroxide/MOF (FeNi LDH/MOF) by Ni2+ etching. Finally, a nickel-iron phosphide/nitrogen-doped carbon cubic nanocage (FeNiP/NC) was obtained by calcination and phosphating. FeNiP/NC with its unique core-shell structure has an overpotential of only 240 mV at a current density of 10 mA/cm2 and can be continuously electrolyzed for 45 h. High catalytic activity of FeNiP/NC is mainly attributed to the action of Fe and Ni bimetals and the synergistic effect between FeNiP and N-doped porous carbon, which was confirmed by the calculation of density functional theory (i.e., Gibbs free energy). After a long period of electrolysis, FeNiP was converted to MOOH (M = Fe and Ni) and became the new active site. This study provides a feasible optimization strategy for the development of high-efficiency three-dimensional electrode materials without precious metals.

Cr doping and heterostructure-accelerated NiFe LDH reaction kinetics assist the MoS2 oxygen evolution reaction

Although molybdenum disulfide (MoS2) has garnered significant interest as a potential catalyst for the oxygen evolution reaction (OER), its poor intrinsic activity and few marginal active spots restrict its electrocatalytic activity. Herein, we successfully constructed a catalyst via a simple hydrothermal method by forming a heterostructure of MoS2 with Cr-doped nickel-iron hydroxide (NiFe LDH) to synthesize a MoS2/NiFeCr LDH catalyst to significantly improve the OER catalytic performance. MoS2 plays a crucial function as an electron transport channel in the MoS2/NiFeCr LDH heterostructure, which increases the electron transport rate. Furthermore, a larger active surface area for NiFeCr LDH is provided by the ultrathin layered structure of MoS2, increasing the number of active sites and encouraging the OER. On the other hand, the introduction of Cr element increased the density of the catalytic center and provided additional Cr-OH active sites, which accelerated the oxygen decomposition reaction. These two factors act synergistically to improve the intrinsic structure of MoS2, increase the number of reactive sites, and dramatically enhance the OER catalytic performance. Excellent OER activity is demonstrated by the MoS2/NiFeCr LDH catalyst, which only needs an overpotential of 224 mV to obtain a current density of 10 mA cm-2 and a Tafel slope of 61 mV dec-1. The catalyst also demonstrated outstanding stability, with its activity practically holding steady after 48 h of testing. This work offers novel ideas for enhancing and designing MoS2-based OER catalysts, and it provides a crucial reference for research in the field of clean energy.

A moderate method for in situ growing Fe-based LDHs on Ni foam for catalyzing the oxygen evolution reaction

Fe-based LDHs have been proven to be an excellent class of catalysts for the oxygen evolution reaction (OER). To achieve industrial applications of water splitting, it is critical to develop a cost-effective and simple strategy to achieve large-area catalytic electrodes. Herein, we present a moderate in situ method for growing Fe-based layered double hydroxide nanosheets on a Ni foam (LDH@NF) substrate at room temperature. Through systematic experimental design characterization, it is found that this in situ growth process is mainly driven by moderate oxidation of Fe2+ in an O2-dissolved solution, the consequent local alkaline environment, and abundant TM2+ ions (Ni2+, Co2+, Ni2+/Co2+). Compared with other in situ methods, this method is not accompanied by violent redox reactions and is favorable for the uniform growth of LDHs, and the composition of the catalyst can be easily regulated. Specifically, the optimized NiFe-LDH@NF catalyst demonstrates excellent catalytic performance in the alkaline water oxidation reaction with a low overpotential of 206/239 mV at a current density of 10/100 mA cm-2, respectively.

Rapid preparation of high efficiency hydrogen evolution catalyst with hydrophilicity

The electrolytic water method is an outstanding hydrogen production process because of its high stability and no restriction. A low-priced and efficient catalyst for electro-deposition of Ni-Co microspheres and nanoclusters on carbon steel (Ni-Co/CS) has been prepared by the dynamic hydrogen bubble template. In the 6 M KOH solution, Ni-Co/CS only requires an overpotential of 48 mV to provide a current density of 50 mA cm-2. At the same time, it also has a large electrochemically active specific surface area (ECSA) and a hydrophilic surface. In addition, the study about the influence of carbon steel (CS) on Ni-Co coatings and the comparison experiment for different base materials has been completed. The results prove that CS is an excellent base material for hydrogen production. It can help the Ni-Co catalyst to have a stable electrolysis in 6 M KOH for 500 h. The above properties of Ni-Co/CS catalyst make it a new choice of hydrogen production by electrolysis of water in practical applications.

Synergistic Activation of Inert Iron Oxide Basal Planes through Heterostructure Formation and Doping for Efficient Hydrogen Evolution

Iron oxides have emerged as a very promising and cost-effective alternative to precious metal catalysts for hydrogen production. However, the inert basal plane of iron oxides needs to be activated to enhance their catalytic efficiency. In this study, we employed heterostructure engineering and doped nickel to cooperatively activate the basal planes of iron oxide (Ni-Fe2 O3 /CeO2 HSs) to achieve high hydrogen evolution reaction (HER) activity. The Ni-Fe2 O3 /CeO2 HSs electrocatalyst demonstrates excellent basic HER activity and stability, such as an extremely low overpotential of 43 mV at 10 mA cm-2 current density and corresponding Tafel slope of 58.6 mV dec-1 . The increase in electrocatalyst activity and acceleration of hydrogen precipitation kinetics arises from the dual modulation of Ni doping and heterostructure, which not only modulates the electrocatalyst's electronic structure, but also increases the number and exposure of active sites. Remarkably, the generation of heterogeneous structure makes the catalyst se. The Ni-doped catalyst has not only increased HER activity but also low-temperature resistance. These results suggest that the synergistic activation of inert iron oxide basal planes through heterostructure formation and doping is a feasible strategy. Furthermore, for efficient electrocatalytic water splitting, this technique can be extended to other non-noble metal oxides.

Polysulfide induced synthesis of a MoS2 self-supporting electrode with wide-layer-spacing for efficient electrocatalytic water splitting

Efficient non-noble metal bifunctional electrocatalysts can increase the conversion rate of electric energy in the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). Herein, a ball & sheet MoS2/Ni3S2 composite with wide-layer-spacing and high 1T-rich MoS2 is assembled on nickel foam (NF) via a two-step solvothermal method with polymeric sulfur (S-r-DIB) as the sulfur source. The obtained material serves as both the cathode and the anode toward overall water splitting in an alkaline electrolyte. The results proved that the interpenetration of MoS2/Ni3S2-p with a ball and sheet structure increased the material active surface area and exposed more catalytic active sites, which contributed to the penetration of solution and the transfer of charge/hydrion. Meanwhile, two different semiconductors of MoS2 and Ni3S2 along with the presence of ample active sulfur edge sites and few-layer, wide-layer-spacing structures of MoS2 lead to an outstanding electrocatalytic activity. In particular, the electrodes of MoS2/Ni3S2-p only need a battery voltage of 1.55 V at 10 mA cm-2. The bifunctional electrocatalyst MoS2/Ni3S2-p also shows excellent stability at large current densities during the electrochemical test.

Electrochemical activated molybdenum oxides based multiphase heterostructures with high hydrogen evolution activity in alkaline condition

Electrochemical activation is an effective method for synthesizing economically feasible heterogeneous hydrogen evolution reaction (HER) electrocatalysts. Herein, we first synthesized MoO2-Co2Mo3O8precatalyst, which was electrochemically activated to produce K2Mo3O10within the original phase to form the heterogeneous structure. The electrochemically activated samples demonstrate exceptional HER activity in alkaline medium, which exhibit a low overpotential of 31 mV at current density of 10 mA cm-2(135 mV at 100 mA cm-2), as well as a small Tafel slope of 34 mV dec-1. This is due to the creation of multiphase heterostructures that prompt interfacial interactions and accelerate charge transfer. Simultaneously, the creation of additional active sites increases their intrinsic activities. The combined effects collectively enhance the HER performance. The application of this method in the preparation of HER catalysts is still relatively unexplored, thus rendering our work a pioneering contribution to the field.

Ultrafast synthesis of halogen-doped Ru-based electrocatalysts with electronic regulation for hydrogen generation in acidic and alkaline media

Developing a facile and time-saving method for preparing hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) electrocatalysts can accelerate the practical applications of hydrogen energy. In this study, halogen (X = F, Cl, Br and I) doped Ru-RuO₂ on carbon cloth (CC) (X-Ru-RuO₂/MCC) was synthesized via an ultrafast microwave-assisted method for 30 s. Particularly, the doped Br (Br-Ru-RuO₂/MCC) significantly improved the electrocatalytic performances of the catalyst through the regulation of electronic structures. Then, the Br-Ru-RuO₂/MCC catalyst featured HER overpotentials of 44 mV and 77 mV in 1.0 M KOH and 0.5 M H₂SO₄, and the OER overpotential of 300 mV at 10 mA cm^-2 in 1.0 M KOH. This study provides a novel method for developing of halogen-doped catalysts.

Construction of an Advanced NiFe-LDH/MoS2-Ni3S2/NF Heterostructure Catalyst toward Efficient Electrocatalytic Overall Water Splitting

Developing high-efficiency, low-cost, and earth-abundant electrocatalysts toward the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER) is highly desirable for boosting the energy efficiency of water splitting. Herein, we adopted an interfacial engineering strategy to enhance the overall water splitting (OWS) activity via constructing a bifunctional OER/HER electrocatalyst combining MoS₂-Ni₃S₂ with NiFe layered double hydroxide (NiFe-LDH) on a nickel foam substrate. The NiFe-LDH/MoS₂-Ni₃S₂/NF electrocatalyst delivers superior OER/HER activity and stability, such as low overpotentials (220 and 79 mV for OER and HER at current densities of 50 and 10 mA cm^-2, respectively) and a low Tafel slope. This excellent electrocatalytic performance mainly benefits from the electronic structure modulation and synergistic effects between NiFe-LDH and MoS₂-Ni₃S₂, which provides a high electrochemical activity area, more active sites, and strong electron interaction. Furthermore, the assembly of NiFe-LDH/MoS₂-Ni₃S₂/NF into a two-electrode system only requires an ultra-low cell voltage of 1.50 V at a current density of 10 mA cm^-2 and exhibits outstanding stability with a decay of current density of only 2.11% @50 mA cm^-2 after 50 h, which is far superior to numerous other reported transition metal NiFe-LDH and MoS₂-Ni₃S₂-based as well as RuO₂||Pt-C electrocatalysts. This research highlights the rational design of heterostructures to efficiently advance electrocatalysis for water splitting applications.

Phase Evolution on the Hydrogen Adsorption Kinetics of NiFe-Based Heterogeneous Catalysts for Efficient Water Electrolysis

Transition metal layered double hydroxides, especially nickel-iron layered double hydroxide (NiFe-LDH) shows significant advancement as efficient oxygen evolution reaction (OER) electrocatalyst but also plays a momentous role as a precursor for NiFe-based hydrogen evolution reaction (HER) catalysts. Herein, a simple strategy for developing Ni-Fe-derivative electrocatalysts via phase evolution of NiFe-LDH under controllable annealing temperatures in an argon atmosphere is reported. The optimized catalyst annealed at 340 ^o C (denoted NiO/FeNi₃ ) exhibits superior HER properties with an ultralow overpotential of 16 mV@10 mA cm^-2 . Density functional theory simulation and in situ Raman analyses reveal that the excellent HER properties of the NiO/FeNi₃ can be attributed to the strong electronic interaction at the interface of the metallic FeNi₃ and semiconducting NiO, which optimizes the H₂ O and H adsorption energies for efficient HER and OER catalytic processes. This work will provide rational insights into the subsequent development of related HER electrocatalysts and other corresponding compounds via LDH-based precursors.

Tunable d-band center of a NiFeMo alloy with enlarged lattice strain enhancing the intrinsic catalytic activity for overall water-splitting

Developing efficient bifunctional electrocatalysts for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) under alkaline conditions is prospective for reducing energy consumption during water electrolysis. In this work, we successfully synthesized nanocluster structure composites composed of NiFeMo alloys with controllable lattice strain by the electrodeposition method at room temperature. The unique structure of NiFeMo/SSM (stainless steel mesh) facilitates the exposure of abundant active sites and promotes mass transfer and gas exportation. The NiFeMo/SSM electrode exhibits a low overpotential of 86 mV at 10 mA cm^-2 for the HER and 318 mV at 50 mA cm^-2 for the OER, and the assembled device reveals a low voltage of 1.764 V at 50 mA cm^-2. Moreover, both the experimental results and theoretical calculations reveal that the dual doping of Mo and Fe can induce the tunable lattice strain of nickel, which in turn changes the d-band center and electronic interaction of the catalytically active site, and finally enhances the HER and OER catalytic activity. This work may provide more options for the design and preparation of bifunctional catalysts based on non-noble metals.

In situ growth of Prussian blue analogue-derived Fe-doped NiS on Ni(OH)2 for efficient hydrogen evolution reaction

The energy industry is placing more and more emphasis on the need for effective and affordable electrocatalysts for hydrogen evolution reactions (HER). In this work, an iron-doped NiS/Ni(OH)₂/CC composite material was synthesized by simple hydrothermal sulfurization processes of bimetallic Prussian blue analogue (PBAs) precursors grown in situ on three-dimensional (3D) Ni(OH)₂ nanosheets. The overpotential can be 103 mV to attain current densities of 10 mA cm^-2. The excellent catalytic activity of Fe-NiS/Ni(OH)₂/CC is because of the unique 3D structure and the uniform doping of iron caused by the in situ growth of PBA, as well as the high conductivity of the self-supported electrode carbon cloth.

Recent advances in epitaxial heterostructures for electrochemical applications

Construction of epitaxial heterostructures is crucial for boosting the electrochemical properties of various materials, however a review dedicated to this attractive topic is still lacking. In this Minireview, a timely summary on the achievements of epitaxial heterostructure design for electrochemical applications is provided. We first introduce the synthesis strategies to provide fundamental understanding on how to create epitaxial interfaces between different components. Secondly, the superiorities of epitaxial heterostructures in electrocatalysis, supercapacitors and batteries are highlighted with the underlying structure-property relationship elucidated. Finally, a discussion on the challenges and future prospects of this field is presented.

Alkaline Media Regulated NiFe-LDH-Based Nickel–Iron Phosphides toward Robust Overall Water Splitting

The search for low-cost, high-performance, and robust stability bifunctional electrocatalysts to substitute noble metals-based counterparts for overall water splitting to generate clean and sustainable hydrogen energy is of great significance and challenges. Herein, a high-efficient bi-functional nickel–iron phosphide on NiFe alloy foam (denoted as e-NFP/NFF) with 3D coral-like nanostructure was controllably constructed by means of alkali etching and the introduction of non-metallic atoms P. The unique superhydrophilic coral-like structure can not only effectively facilitate the exposure of catalytic active sites and increase the electroactive surface area, but also accelerate charge transport and bubble release. Furthermore, owing to the synergistic effect between the bicomponent of nickel–iron phosphides as well as the strong electronic interactions of the multiple metal sites, the as-fabricated catalyst behaves with excellent bifunctional performance for the hydrogen evolution reaction (overpotentials of 132 and 286 mV at 10 and 300 mA·cm−2, respectively) and oxygen evolution reaction (overpotentials of 181 and 303 mV at 10 and 300 mA·cm−2, respectively) in alkaline electrolytes. Impressively, cells with integrated e-NFP/NFF electrodes as a cathode and anode require only a low cell voltage (1.58 V) to drive a current density of 10 mA·cm−2 for overall water splitting, along with remarkable stability in long-term electrochemical durability tests. This study provides a tunable synthetic strategy for the development of efficient and durable non-noble metal bifunctional catalysts based on the construction of an elaborate structure framework and rational design of the electronic structure.

Cationic defect-enriched hydroxides as anodic catalysts for efficient seawater electrolysis

A porous NiFe LDH with abundant cationic defects was synthesized to optimize interactions between active Ni species and adsorbates, exhibiting a highly efficient seawater electrolysis performance.

Design of Ni(OH)2 Nanosheets@NiMoO4 Nanofibers' Hierarchical Structure for Asymmetric Supercapacitors

Transition-metal-based materials show great promise for energy conversion and storage due to their excellent chemical properties, low cost, and excellent natural properties. In this paper, through simple strategies such as classical electrospinning, air calcination, and the one-step hydrothermal method, a large area of Ni(OH)₂ nanosheets were grown on NiMoO₄ nanofibers, forming NiMoO₄@Ni(OH)₂ nanofibers. The one-dimensional nanostructure was distributed with loose nanosheets, and this beneficial morphology made charge-transfer and diffusion more rapid, so the newly developed material showed good capacitance and conductivity. Under the most suitable experimental conditions, the optimal electrode exhibited the highest specific capacitance (1293 F/g at 1 A/g) and considerable rate capability (56.8% at 10 A/g) under typical test conditions. Most interestingly, the corresponding asymmetrical capacitors exhibited excellent electrochemical cycle stability, maintaining 77% of the original capacitance. NiMoO₄@Ni(OH)₂ nanofibers were verified to be simple to prepare and to have good performances as energy-storage devices within this experiment.

Metallic Inverse Opal Frameworks as Catalyst Supports for High-Performance Water Electrooxidation

High intrinsic activity of oxygen evolution reaction (OER) catalysts is often limited by their low electrical conductivity. To address this, we introduce copper inverse opal (IO) frameworks offering a well-developed network of interconnected pores as highly conductive high-surface-area supports for thin catalytic coatings, for example, the extremely active but poorly conducting nickel-iron layered double hydroxides (NiFe LDH). Such composites exhibit significantly higher OER activity in 1 m KOH than NiFe LDH supported on a flat substrate or deposited as inverse opals. The NiFe LDH/Cu IO catalyst enables oxygen evolution rates of 100 mA cm^-2 (727±4 A g_catalyst ^-1 ) at an overpotential of 0.305±0.003 V with a Tafel slope of 0.044±0.002 V dec^-1 . This high performance is achieved with 2.2±0.4 μm catalyst layers, suggesting compatibility of the inverse-opal-supported catalysts with membrane electrolyzers, in contrast to similarly performing 10³ -fold thicker electrodes based on foams and other substrates.

Simple solution route to synthesize NiFe oxide/nanocarbon composite catalysts for the oxygen evolution reaction

The simple solution route produces OER-active and cost-effective NiFeOx/C catalysts, which contribute to the production of green hydrogen via electrochemical water splitting.