Performances of symmetrical achiral ferrocenylphosphine ligands in palladium-catalyzed cross-coupling reactions: A review of syntheses, catalytic applications and structural properties

Ferrocenyl Dinuclear Gold(I) Complexes. Study of their Structural Features and the Influence of Bridging and Phosphane Ligands in a Catalytic Cyclization Reaction

The combination of the ferrocene moiety with gold(I) catalysis remains a relatively unexplored field. In this article, we delve into the synthesis, characterization, and potential catalytic activity of four complexes utilizing both monodentate and bidentate ferrocenyl diphenylphosphane ligands (ppf and dppf), coordinated with two gold(I) metal centers, linked by either chloride or pentafluorophenylthiolate bridging ligands. This leads to the formation of cationic "self-activated" precatalysts capable of initiating the catalytic cycle without the need for external additives. The catalytic activity of these complexes was assessed through a model reaction in gold(I) catalysis, specifically the cyclization of a N-propargylbenzamide to produce an oxazole. In addition, we studied and compared the influence exerted by both the phosphane and the bridging ligand on the performance of these catalysts.

Hybrid Phosphine/Amino-Acid Ligands Built on Phenyl and Ferrocenyl Platforms: Application in the Suzuki Coupling of o-Dibromobenzene with Fluorophenylboronic Acid

We describe the synthesis and characterization of two classes of hybrid phosphino ligands functionalized with amino ester or amino acid groups. These compounds are built either on a rigid planar phenyl platform or on a functionalized - conformationally controlled - rotational ferrocene backbone. Modifications at the -PR2 phosphino groups (R=aryl and alkyl, with various steric bulk, Ph, Mes, i-Pr, Cy) and at the amino acid/amino ester functions are reported, showing a valuable high modularity. The coordination chemistry of these compounds regarding palladium and gold was investigated, in particular with respect to the coordination mode of the phosphino groups and the preferred interaction with metals for the amino ester and amino acid functions. For all the hybrid ligands, based either on ferrocenyl or phenyl platforms, the (P,N)-chelating effect dominates in solution for coordination to Pd(II), while linear P-Au(I) complexes without interaction with the amino groups are assumed. The investigation of the catalytic activity of these new ligands in the demanding palladium-catalyzed Suzuki-Miyaura coupling of o-dibromoarenes with fluorophenylboronic acid underlined the importance of the amino ester dicyclohexylphosphinoferrocene for avoiding the deleterious homocoupling and arene oligomerization side-reactions that were otherwise observed with the other phosphine ligands.

Copper-Promoted Hiyama Cross-Coupling of Arylsilanes With Thiuram Reagents: A Facile Synthesis of Aryl Dithiocarbamates

We report herein a facile Hiyama cross-coupling reaction of arylsilanes with thiuram reagents (tetraalkylthiuram disulfides or tetraalkylthiuram monosulfide) enabled by copper fluoride. Compared to our previous work, this protocol is an alternative protocol for the generation of S-aryl dithiocarbamates. It features low toxic and readily available substrates, cost-effective promoter, easy performance, and provides good yields.

Forever young: the first seventy years of ferrocene

The discovery of ferrocene, [Fe(η5-C5H5)2], seventy years ago has significantly influenced chemical research and provided a key impetus for establishing and rapidly expanding organometallic chemistry, which has continued at a...

Synthesis of 3-aryl-1-phosphinoimidazo[1,5-a]pyridine ligands for use in Suzuki-Miyaura cross-coupling reactions

3-Aryl-1-phosphinoimidazo[1,5-a]pyridine ligands were synthesized from 2-aminomethylpyridine as the initial substrate via two complementary routes. The first synthetic pathway underwent the coupling of 2-aminomethylpyridine with substituted benzoyl chlorides, followed by cyclization, iodination and palladium-catalyzed cross-coupling phosphination reactions sequence to give our phosphorus ligands. In the second route, 2-aminomethylpyridine was cyclized with aryl aldehydes, followed by the iodination and palladium-catalyzed cross-coupling phosphination reactions to yield our phosphorus ligands. The 3-aryl-1-phosphinoimidazo[1,5-a]pyridine ligands were evaluated in palladium-catalyzed sterically-hindered biaryl and heterobiaryl Suzuki-Miyaura cross-coupling reactions.

Ferrocenylimine Palladium (II) Complexes: Synthesis, Characterization and Application in Mizoroki-Heck and Suzuki-Miyaura Cross-Coupling Reactions

Carbon-carbon cross-coupling reactions are essential synthetic tools for synthesizing polymers, natural products, agrochemicals, and pharmaceuticals. Therefore, new catalysts that function with greater efficiency and functional group tolerance are being researched. We have prepared new ferrocenylimine monodentate N and P donor ligands and N^N and N^P bidentate chelating ligands (L1 to L4) employed in stabilizing palladium ions for application in Mizoroki-Heck and Suzuki-Miyaura cross-coupling reactions. The ferrocenylimine ligands were successfully synthesized by Schiff base condensation reactions of acetyl ferrocene with hydrazine monohydrate to afford ferrocenyl hydrazone (L1). Ligand L1 was further treated with aldehydes to give ferrocenyl(2-diphenylphosphino)imine (L3) and ferrocenyl(pyridyl)imine (L3), while phosphination of L1 with chlorodiphenylphosphine afforded L2. The ligands were used to prepare new palladium(II) complexes (C1 to C4) by complexation with [PdCl2(MeCN)2]. All the ligands and complexes were fully characterized using standard spectroscopic and analytical techniques, including 1H NMR and 13C NMR spectroscopy, FT-IR spectroscopy, mass spectrometry and elemental analysis. The complexes (C1 to C4) were tested for efficacies in catalyzing Mizoroki-Heck and Suzuki-Miyaura C-C cross-coupling reactions and proved to be suitable catalyst precursors. Ferrocenyl(2-diphenylphosphine)imino and ferrocenyl-methyl hydrazone palladium(II) complexes C2 and C3 showed the best activities at TONs of up to 201. The ferrocenyl palladium(II) (pre)catalysts demonstrated moderate activity in Mizoroki-Heck reactions involving substrates with substituents on the olefin and aryl halide (including 4-Cl, 4-CH3, -CO2Me and -CO2Et). Density Functional Theory was used to study the mechanism of the Mizoroki-Heck cross-coupling reactions and have led to confirmation of the widely accepted catalytic cycle. Catalyst precursors (C1 to C4) also displayed good activity and selectivity in Suzuki-Miyaura cross-coupling reactions, at 0.5 mol% catalyst loading, with good tolerance to functional groups present on the aryl halide and boronic acid substrates (such as 4-Cl, 4-CHO, 4-COOH, 3-NO2, 3,5-dimethoxy and 4-CH3).

Estimating Effective Steric and Electronic Impacts of a Ferrocenyl Group in Organophosphines

A series of monodentate ferrocenylphosphines, Fc₃P (1a), Fc₂PhP (1b), and Fc₂ArP (1c; Fc = ferrocenyl, Ar = 3,4-methylenedioxyphenyl), were prepared, and their electronic and steric properties were quantitatively determined. By the IR measurements of their respective Ni(CO)₃(phosphine) complexes, the electronic properties of the ferrocenyl group in organophosphines were estimated to be similar to those of primary alkyl groups. The ferrocenyl group is a better electron donor than a methyl group and a poorer donor than an ethyl group. The gold(I) chloride complexes of 1a-c were prepared and their X-ray crystal structures were determined. The %V _bur parameters for 1a-c were calculated using the X-ray structural data, and their ″Tolman cone angles″ were estimated. The steric influence of the ferrocenyl group in organophosphines was clarified to be larger than those of cyclohexyl, tert-butyl, and o-tolyl groups and is comparable to that of a mesityl group.

Experimental study of speciation and mechanistic implications when using chelating ligands in aryl-alkynyl Stille coupling

Neutral palladium(ii) complexes [Pd(Rf)X(P-L)] (Rf = 3,5-C6Cl2F3, X = Cl, I, OTf) with P-P (dppe and dppf) and P-N (PPh2(bzN)) ligands have chelated structures in the solid-state, except for P-L = dppf and X = Cl, were chelated and dimeric bridged structures are found. The species present in solution in different solvents (CDCl3, THF, NMP and HMPA) have been characterised by 19F and 31P{1H} NMR and conductivity studies. Some [Pd(Rf)X(P-L)] complexes are involved in equilibria with [Pd(Rf)(solv)(P-L)]X, depending on the solvent and X. The ΔH° and ΔS° values of these equilibria explain the variations of ionic vs. neutral complexes in the range 183-293 K. Overall the order of coordination strength of solvents and anionic ligands is: HMPA ≫ NMP > THF and I-, Cl- > TfO-. This coordination preference is determining the complexes participating in the alkynyl transmetalation from PhC[triple bond, length as m-dash]CSnBu3 to [Pd(Rf)X(P-L)] (X = OTf, I) in THF and subsequent coupling. Very different reaction rates and stability of intermediates are observed for similar complexes, revealing neglected complexities that catalytic cycles have to deal with. Rich information on the evolution of these Stille systems after transmetalation has been obtained that leads to proposal of a common behaviour for complexes with dppe and PPh2(bzN), but a different evolution for the complexes with dppf: this difference leads the latter to produce PhC[triple bond, length as m-dash]CRf and black Pd, whereas the two former yield PhC[triple bond, length as m-dash]CRf and [Pd(C[triple bond, length as m-dash]CPh)(SnBu3)(dppe)] or [Pd(C[triple bond, length as m-dash]CPh)(SnBu3){PPh2(bzN)}].

Bulky 1,1'-bisphosphanoferrocenes and their coordination behaviour towards Cu(i)

Two bulky mesityl substituted dppf-analogues Fe(C₅H₄PMes₂)₂ (Mes = 2,4,6-Me₃C₆H₂, 1) and Fe(C₅H₄PMes₂)(C₅H₄PPh₂) (Mes = 2,4,6-Me₃C₆H₂, Ph = C₆H₅, 3) have been prepared and their properties as donor ligands have been explored using heteronuclear NMR spectroscopy and in particular via¹J_P-Se coupling, cyclic voltammetry and DFT calculations. Based on the results obtained, a series of mono- and dinuclear Cu(i) complexes have been prepared with these new diphosphane ligands using Br^-, I^-, and BF₄^- as counter anions. For the very bulky ligand 1 rare and unprecedented double bridging complexation modes have been observed containing two non-planar Cu₂Br₂ units, while for the other dinuclear complexes planar Cu₂Br₂ units have been found. The Cu(i) complexes of 1 and 3 were then used as catalysts for CO₂-fixation reaction with terminal alkynes, and complexes with ligand 3 were found to be more efficient than those with 1. DFT calculations performed on compounds 1, 3 and their Cu(i) complexes were able to verify the trend of these catalytic reactions.

Synthesis of 3-aryl-2-phosphinoimidazo[1,2-a]pyridine ligands for use in palladium-catalyzed cross-coupling reactions

3-Aryl-2-phosphinoimidazo[1,2-a]pyridine ligands were synthesized from 2-aminopyridine via two complementary routes. The first synthetic route involves the copper-catalyzed iodine-mediated cyclizations of 2-aminopyridine with arylacetylenes followed by palladium-catalyzed cross-coupling reactions with phosphines. The second synthetic route requires the preparation of 2,3-diiodoimidazo[1,2-a]pyridine or 2-iodo-3-bromoimidazo[1,2-a]pyridine from 2-aminopyridine followed by palladium-catalyzed Suzuki/phosphination or a phosphination/Suzuki cross-coupling reactions sequence, respectively. Preliminary model studies on the Suzuki synthesis of sterically-hindered biaryl and Buchwald-Hartwig amination compounds are presented with these ligands.

Synthesis, structural properties and reactivity of ruthenocene-based pincer Pd(ii) tetrahydroborate

Non-covalent interactions determine the structure, crystal packing and reactivity of isolated ruthenocene-based pincer Pd(ii) complexes. Bifurcate dihydrogen-bonded complexes are active intermediates of tetrahydroborate alcoholysis.

Heterobimetallic copper(i) complexes bearing both 1,1′-bis(diphenylphosphino)ferrocene and functionalized 3-(2′-pyridyl)-1,2,4-triazole

Copper(i) 1,1′-bis(diphenylphosphino)ferrocene complexes are well regulated by functional 3-(2′-pyridyl)-1,2,4-triazole exhibiting mono-anionic η²(N1,N2) and neutral η²(N1,N2) and η²(N1,N4) chelating modes.

Piedade MF, Garcia MH, de Brito MJV, Morais TS. First heterobimetallic Cu(i)–dppf complexes designed for anticancer applications: synthesis, structural characterization and cytotoxicity

First heterobimetallic Cu(i)–dppf complexes with bidentate heteroaromatic ligands designed for anticancer applications.

Highly efficient structurally characterised novel precatalysts: di- and mononuclear heteroleptic Cu(i) dixanthate/xanthate–phosphine complexes for azide–alkyne cycloadditions

Prominent catalytic activities of novel di- and mononuclear Cu(i) xanthate/phosphine complexes have been investigated for the synthesis of triazolyl glycoconjugates using Click approach.

Cyanoferrocenes as redox-active metalloligands for coordination-driven self-assembly

Ferrocene-based Lewis bases have found utility as metalloligands in a wide variety of applications. The coordination chemistry of cyanoferrocenes however, is underexplored. Herein, we describe a new synthetic protocol for the generation of cyanoferrocenes. The coordination chemistry of these metalloligands to [Cu(NCMe)4][PF6], [(PPh3)2Cu(NCMe)2][PF6] and [(dppf)Cu(NCMe)2][PF6] salts has been explored, providing crystallographic evidence of cluster and polymeric forms of 1,1'- and 1,2-dicyanoferrocene complexes. The stability of the complexes and ligand dissociation were found to be strongly solvent-dependent.

Valorization of Biomass Derived Terpene Compounds by Catalytic Amination

This review fills an apparent gap existing in the literature by providing an overview of the readily available terpenes and existing catalytic protocols for preparation of terpene-derived amines. To address the role of solid catalysts in amination of terpenes the same reactions with homogeneous counterparts are also discussed. Such catalysts can be considered as a benchmark, which solid catalysts should match. Although catalytic systems based on transition metal complexes have been developed for synthesis of amines to a larger extent, there is an apparent need to reduce the production costs. Subsequently, homogenous systems based on cheaper metals operating by nucleophilic substitution (e.g., Ni, Co, Cu, Fe) with a possibility of easy recycling, as well as metal nanoparticles (e.g., Pd, Au) supported on amphoteric oxides should be developed. These catalysts will allow synthesis of amine derivatives of terpenes which have a broad range of applications as specialty chemicals (e.g., pesticides, surfactants, etc.) and pharmaceuticals. The review will be useful in selection and design of appropriate solid materials with tailored properties as efficient catalysts for amination of terpenes.

Synthesis and structural characterization of electrochemically reversible bisferrocenes containing bis(acyl-thiourea)s: enantiomers and conformers

Enantiomeric and conformational isomers of chiral bisferrocenyl-modified bis(acyl-thiourea)s; their crystal packing and electrochemically reversible redox reaction properties.

Monodentate phosphine substitution in [Pd(κ3-dppf)(PR3)][BF4]2 (dppf = 1,1′-bis(diphenylphosphino)ferrocene) compounds

The synthesis and dissociative monodentate phosphine substitution of [Pd(κ³-dppf)(P(p-C₆H₄R)₃)][BF₄]₂ compounds is presented. DFT calculations further examines the nature of the Fe–Pd interaction of the κ³-dppf ligand.

Palladacycles of sulfated and selenated Schiff bases of ferrocene-carboxaldehyde as catalysts for O-arylation and Suzuki–Miyaura coupling

Palladacycles of Schiff-bases having a ferrocene core catalyze O-arylation of ArBr and Suzuki–Miyaura coupling of ArBr/Cl with a yield up to 93%.

Coordination chemistry of phosphinocarbynes: phosphorus vs. carbyne site selectivity

The phosphinocarbyne complex [W(CPPh₂)(CO)₂(Tp*)] (1: Tp* = hydrotris(dimethylpyrazolyl)borate) coordinates transition metal fragments via the phosphine to form bimetallic species [W{CPPh₂RhCl₂(Cp*)}(CO)₂(Tp*)] (2) and [W(CPPh₂AuCl)(CO)₂(Tp*)] (3).