Structures and properties of gold(I) complexes of interest in biochemical applications

The use of DOSY experiments to determine the solution structures of coinage metal pyrazolates: The case of {[3,5-(CF3 )2 Pz]Ag}3

A series of DOSY experiments have been carried out to determine the solution stoichiometry of silver(I) 3,5-bis (trifluoromethyl)pyrazolate species. This compound exists as a trimer in the solid state (n = 3) but in solutions of chlorinated solvents, the DOSY data suggest the presence of a mixture of solvent stabilized monomer (n = 1) and dimer (n = 2) in equilibrium. Different approximations have been used including the Stokes-Einstein and the Stokes-Einstein-Gierer-Wirtz equations. Some methodological problems are discussed.

Synthesis and photophysical properties of multimetallic gold/zinc complexes of (P,N,N,N,P) and (P,N,N) ligands

Orthogonal coordination of gold and zinc yields mono- and bimetallic complexes, which are investigated concerning their photophysics.

Mechanochemical synthesis of mononuclear gold(I) halide complexes of diphosphine ligands with tuneable luminescent properties

A mechanochemical method is reported for the synthesis of Au(diphos)X complexes of diphosphine (diphos = XantPhos and N-XantPhos) ligands and halide ions (X = Cl and I). The Au(XantPhos)X (1: X = Cl; 2: X = I) and Au(N-XantPhos)Cl (3) complexes exhibited either yellowish green (1) or bluish green (2) emission, whereas 3 was seemingly non-emissive in the solid state at room temperature. Blue- (2B) and bluish green (2G) luminescent concomitant solvates of 2 were obtained by recrystallization. Luminescent colour changes from blue (2B) or bluish green (2G) to yellow were observed when these forms were subjected to mechanical stimulus, while the original emission colour can be recovered in the presence of solvent vapours. Moreover, the luminescence of 2B can be reversibly altered between blue and yellow by heating/cooling-cycles. These results demonstrate the power of mechanochemistry in the rapid (4 min reaction time), efficient (up to 98% yield) and greener synthesis of luminescent and stimuli-responsive gold(I) complexes.

Induction of apoptosis on ovarian adenocarcinoma cells, A2780 by tricyclohexylphosphanegold (I) mercaptobenzoate derivatives via intrinsic and extrinsic pathways

Tricyclohexylphosphanegold(I) n-mercaptobenzoate (n = 2, 3, 4) labelled as 1-3 were previously reported to significantly suppress thioredoxin reductase (TrxR) activities towards ovarian cancer cells, A2780, in vitro. Herein, we explored the role of 1-3 for their apoptosis inducing ability against A2780 cells. 1-3 exhibited IC₅₀ values at 1.19 ± 0.03 µM, 2.28 ± 0.04 μM and 0.78 ± 0.01 μM, respectively, compared to cisplatin at 26.8 ± 0.15 µM. The compounds induced A2780 apoptosis via a caspase-dependent mitochondrion pathway as evidenced by ROS production, cytochrome c release, caspases-3/7, -8, -9 and -10 activation, APAF1 and BAX upregulation as well as BCL2A1 and BCL2 genes' downregulation. In addition, the death mode of 1-3 was also mediated via death receptor extrinsic pathway manifested by FAS, FASL, FADD, and TNFR1 genes' upregulation via Human Rt PCR analysis. In addition, 1-3 significantly caused A2780 arrest at S phase, which was associated with the upregulation of TP53, E2F1, RB1 and CDKN1A upregulation and downregulation of CDK1, CDK4, CDC25A and CDC25C genes. Based on these promising results, these phosphanegold(I) thiolate derivatives could act as feasible candidates for further advanced in vivo ovarian cancer studies to develop novel chemotherapeutic agents derived from metal-based agents.

Coinage-Metal-Based Cyclic Trinuclear Complexes with Metal-Metal Interactions: Theories to Experiments and Structures to Functions

Among the d¹⁰ coinage metal complexes, cyclic trinuclear complexes (CTCs) or trinuclear metallocycles with intratrimer metal-metal interactions are fascinating and important metal-organic or organometallic π-acids/bases. Each CTC of characteristic planar or near-planar trimetal nine-membered rings consists of Au(I)/Ag(I)/Cu(I) cations that linearly coordinate with N and/or C atoms in ditopic anionic bridging ligands. Since the first discovery of Au(I) CTC in the 1970s, research of CTCs has involved several fundamental areas, including noncovalent and metallophilic interaction, excimer/exciplex, acid-base chemistry, metalloaromaticity, supramolecular assemblies, and host/guest chemistry. These allow CTCs to be embraced in a wide range of innovative potential applications that include chemical sensing, semiconducting, gas and liquid adsorption/separation, catalysis, full-color display, and solid-state lighting. This review aims to provide a historic and comprehensive summary on CTCs and their extension to higher nuclearity complexes and coordination polymers from the perspectives of synthesis, structure, theoretical insight, and potential applications.

Mild and Efficient Synthesis of Diverse Organo-AuI -L Complexes in Green Solvents

An exceptionally mild and efficient method was developed for the preparation of (hetero)aryl-Au^I -L complexes using ethanol or water as the reaction medium at room temperature and Ar-B(triol)K boronates as the transmetalation partner. The reaction does not need an exogeneous base or other additives, and quantitative yields can be achieved through a simple filtration as the only required purification method, which obviates considerable waste associated with alternative workup methods. A broad reaction scope was demonstrated with respect to both the L and (hetero)aryl ligands on product Au complexes. Despite the polar reaction medium, large polycyclic aromatic hydrocarbon units can be incorporated on the Au complexes in very good to excellent yields. The approach was demonstrated for the chemoselective manipulation of orthogonally protected aryl boronates to afford a new class of N-heterocyclic carbene-Au-aryl complexes. A mechanistic rationale was proposed.

Harvesting greenish blue luminescence in gold(i) complexes and their application as promising bioactive molecules and cellular bioimaging agents

This work presents new gold materials as promising antitumoral and antibacterial agents and their potential use as luminescent probes for cellular bioimaging.

Raising the Bar in Aromatic Donor-Acceptor Interactions with Cyclic Trinuclear Gold(I) Complexes as Strong π-Donors

Aromatic donor-acceptor interactions are of high importance in supramolecular chemistry, materials science and biology. Compared to other noncovalent interactions, such as hydrogen bonding, the binding is often weak. Here we show that strong donor-acceptor interactions between planar aromatics with binding free energies down to -10.1 kcal mol^-1 and association constants of up to 2.34 × 10⁷ L mol^-1 for 1:1 complexes can be realized using cyclic trinuclear complexes of gold(I) with pyridinate, imidazolate, or carbeniate ligands. Data were obtained through NMR and UV/vis absorption spectroscopic studies and supported by quantum chemical calculations for a variety of acceptors. By using a specifically designed bridged naphthalene diimide-based acceptor with only one binding site, we furthermore show that a 1:2 (donor:acceptor) binding model is best suited to quantify the donor and acceptor/complex equilibrium. Scanning electron microscopy on selected donor-acceptor pairs shows crystalline supramolecular assemblies. We anticipate this study to be relevant for the future design of supramolecular systems and chemical sensors and the determination of binding energies between planar donors and acceptors.

Donor-acceptor interactions between cyclic trinuclear pyridinate gold(i)-complexes and electron-poor guests: nature and energetics of guest-binding and templating on graphite

Aromatic stacking interactions of π-basic Au(i) complexes with π-acids were analyzed experimentally, theoretically and at the solid/liquid interface using STM.

Donor–acceptor-type interactions between π-electron systems are of high relevance in the design of chemical sensors. Due to their electron-rich nature, cyclic trinuclear complexes (CTCs) of gold(i) are ideal receptor sites for electron-deficient aromatic analytes. Scanning tunneling microscopy provided insight into the structures of two-dimensional crystals of pyridinate gold CTCs that form on a graphite template at the solid/liquid interface. One polymorph thereof – in turn – templated the on-top co-adsorption of π-acidic pyrazolate CTCs as electron-poor guests up to a certain threshold. From NMR titration experiments, we quantified free energies of –6.1 to –7.5 kcal mol^–1 for the binding between pyridinate gold(i) CTCs and π-acidic pyrazolate CTCs. Quantum chemical calculations revealed that these interactions are largely dominated by London dispersion. These results give a more detailed insight into a rational design of sensitive CNT- or graphene-based sensors for π-acidic analytes, such as electron-deficient aromatics.

Synthesis of hydroxyl-functionalized N-heterocyclic carbene gold(i) complexes and peptide conjugates

The synthesis and characterization of a series of new cationic gold(i) complexes with hydroxyl-functionalized N-heterocyclic carbene (NHC) ligands is described. They are valuable building blocks for further derivatization: as a first example, coupling with amino acids and a dipeptide, respectively, successfully results in amino acid and peptide conjugates that are hard to obtain by other synthetic routes.

The antioxidant 2,6-di-tert-butylphenol moiety attenuates the pro-oxidant properties of the auranofin analogue

Metal-based drugs are gaining momentum as a rapidly developing area of medicinal inorganic chemistry. Among gold pharmaceuticals, auranofin is a well known antirheumatic drug. The efficacy of gold-organic complexes largely depends on their pro-oxidant properties since auranofin targets the redox enzyme thioredoxin reductase (TrxR). However, an uncontrollable oxygen burst may be harmful for healthy cells; therefore, the search for chemical modifications to attenuate oxidation-related general toxicity of gold containing anti-inflammatory drugs is justified. In this study, we demonstrate that the incorporation of a specific antioxidant phenol fragment can counterbalance the pro-oxidative potential of the Au containing complex molecule. The electrochemical studies of AuPPh₃SR (1, R= 3,5-di-tert-butyl-4-hydroxyphenyl) and its precursors AuPPh₃Cl (2) and RSH (3) showed that complex 1 and phenol 3 efficiently scavenged the radicals (as detected by cyclic voltammetry) whereas 2 had no effect. Compound 1 inhibited TrxR in vitro with IC₅₀ 0.57 ± 0.15 μM, a value one order of magnitude bigger than the potency reported for auranofin. Compound 1 (5 mg kg^-1 daily gavage for 14 days) caused a decrease in ex vivo spontaneous and ascorbate-induced lipid peroxidation in the homogenates of rat lung, heart muscle, spleen, liver, kidneys, testicles and brain as assessed by the thiobarbituric acid reactive substances. Importantly, in animals fed with 1, no discernible general toxicity was registered suggesting that this compound is well tolerated. Our results provide evidence for an efficient synthetic route to obtain gold containing anti-inflammatory drug candidates with balanced pro/anti-oxidative properties.

Considerable Enhancement of Emission Yields of [Au(CN)2(-)] Oligomers in Aqueous Solutions by Coexisting Cations

The photophysical properties of [Au(CN)2(-)] oligomers in aqueous solutions were investigated as functions of coexisting cations as well as the viscosity and temperature of solutions. A solution of [Au(CN)2(-)] in the concentration range of 0.03-0.2 mol/dm(3) exhibited emission peaks at 460-480 nm because of the presence of oligomers larger than trimers. Although the emission yields (ϕem) of K[Au(CN)2] solutions were <1%, it considerably increased to 43% when 1.0 mol/dm(3) tetraethylammonium chloride (Et4NCl) was added. The lifetimes of the main emission bands were also significantly varied with additional salts, e.g., KCl, 15 ns; Et4NCl, 520 ns. The time-resolved emission measurements of [Au(CN)2(-)] in a water/glycerol mixture indicated that the lifetimes were almost directly proportional to the inverse of the viscosity of the solution. On the other hand, the intrinsic lifetimes of dimers and trimers with weak emission in shorter wavelength regions were very short and independent of the viscosity of the solutions and coexisting cations (dimer, ∼25 ps; trimer, ∼2 ns). These results indicated that the deactivation of the excited-state [Au(CN)2(-)]n oligomers (n ≥ 4) was dominated by the dissociation of the oligomers to a shorter species (dimer or trimer). The hydrophobic interactions between tetraalkylammonium cations and CN ligands remarkably stabilized the larger oligomers and suppressed the dissociation of the excited-state oligomers, which enhanced the emission yield of the oligomers. This work provides a new method of "exciplex tuning" by changing the environment of excited-state [Au(CN)2(-)]n oligomers.

Synthesis, spectral characterization and crystals structure of some arsane derivatives of gold (I) complexes: a comparative density functional theory study

A series of complexes of the type LAuCl where L = tris(p-tolylarsane), tris(m-tolylarsane), bis(diphenylarsano)ethane, and tris(naphthyl)arsane have been synthesized. All of the new complexes, 1-4, have been fully characterized by means of ¹H NMR and ¹³C NMR spectroscopy and single crystal X-ray crystallography. The structures of complexes 1-4 have been determined from X-ray diffraction data. The linear molecules have an average bond distance between gold-arsenic and gold-chlorine of 2.3390Å and 2.2846Å, respectively. Aurophilic interaction was prominent in complex 1 and 3, whereas complex 2 and 4 do not show any such interaction. The intermolecular gold interaction bond length was affected by the electronegativity of the molecule. The computed values calculated at DFT level using B3LYP function are in good agreement with the experimental results.

Tuning the photoluminescence of condensed-phase cyclic trinuclear Au(I) complexes through control of their aggregated structures by external stimuli

A series of new cyclic trinuclear Au(I) complexes with alkoxy side chains of various lengths were synthesized as photoluminescence materials. None of the complexes emitted luminescence in solution; however, some showed photoluminescence in the crystalline phase. Single crystal X-ray structural analyses revealed that an intermolecular interaction between two Au atoms (aurophilic interaction) existed only in the emissive complexes, which formed molecular aggregates in the crystal. Because isolated molecules show no luminescence in the present system, we conclude that only molecules aggregated via aurophilic interactions can luminesce. We demonstrated that luminescence properties, such as colour and intensity, were very sensitive to the aggregated structure of the molecules. We also found that such luminescence properties can be controlled by a change in the aggregated structure induced by external stimuli, such as heat, solvent, and mechanical stress.

Five novel dicyanidoaurate(i)-based complexes exhibiting significant biological activities: synthesis, characterization and three crystal structures

Herein the anticancer, antibacterial, and antifungal effects of the five novel dicyanidoaurate(i)-based complexes have been reported.

The importance of Au⋯π(aryl) interactions in the formation of spherical aggregates in binuclear phosphane gold(i) complexes of a bipodal thiocarbamate dianion: a combined crystallographic and computational study, and anti-microbial activity

Compact molecular structures of antimicrobial (R₃PAu)₂L (R = Et (1), Ph ((2) and Cy ((3); LH₂ = {1,4-[MeOC(S)-N(H)]₂C₆H₄}), arise from intramolecular Au⋯π(aryl) interactions, proven by theory to be attractive and 12 kcal mol^–1 more stable than anticipated Au⋯O interactions.

A coumarin based gold(i)-alkynyl complex: a new class of supramolecular hydrogelators

A phosphine-gold(i)-alkynyl-coumarin complex, [Au{7-(prop-2-ine-1-yloxy)-1-benzopyran-2-one}(DAPTA)] (1), was synthesized and the formation of long luminescent fibers in solution was characterized via fluorescence microscopy and dynamic light scattering.

Formation and structure of two luminescent salts of [Au(SCSN3)2]- obtained through the [2 + 3] cyclization of carbon disulfide and azide ion

The colorless, two-coordinate gold(i) complex, [(H2O)3Na][Au(SCSN3)2], has been synthesized through the [2 + 3] cyclic reaction of carbon disulfide and sodium azide in the presence of the labile complex (tht)AuCl. Metathesis of [(H2O)3Na][Au(SCSN3)2], with tetra(phenyl)arsonium chloride produced colorless needles of (Ph4As)[Au(SCSN3)2]. The structure of [(H2O)3Na][Au(SCSN3)2] involves linear gold coordination by two exocyclic sulfur atoms of the 1,2,3,4-thiatriazole-5-thiolate anions. These two-coordinate anions self-associate to form extended, zig-zag chains that are connected by aurophilic bonding with Au∙∙∙Au distances of 3.2653(3) Å and 3.3090(3) Å. Remarkably, the individual S-Au-S units that are connected though aurophilic interactions are eclipsed. The structure of (Ph4As)[Au(SCSN3)2] also contains linear, two-coordinate gold ions with bonding to the 1,2,3,4-thiatriazole-5-thiolate anionic ligands through the exocyclic sulfur atoms. However, in this salt, the anions self-associate through AuAu bonds (Au∙∙∙Au distance of 3.2007(3) Å) to form simple dimers, which also have an eclipsed arrangement of the ligands. Electronic structure calculations strongly suggest that the staggered geometry for the [(Au(SCSN3))2](+) dimer is energetically favored relative to the eclipsed geometry. However, attractive π-stacking interactions appear to promote the observed eclipsed arrangement of the ligands.

Derivation of guideline values for gold (III) ion toxicity limits to protect aquatic ecosystems

This study focused on estimating the toxicity values of various aquatic organisms exposed to gold (III) ion (Au(3+)), and to propose maximum guideline values for Au(3+) toxicity that protect the aquatic ecosystem. A comparative assessment of methods developed in Australia and New Zealand versus the European Community (EC) was conducted. The test species used in this study included two bacteria (Escherichia coli and Bacillus subtilis), one alga (Pseudokirchneriella subcapitata), one euglena (Euglena gracilis), three cladocerans (Daphnia magna, Moina macrocopa, and Simocephalus mixtus), and two fish (Danio rerio and Oryzias latipes). Au(3+) induced growth inhibition, mortality, immobilization, and/or developmental malformations in all test species, with responses being concentration-dependent. According to the moderate reliability method of Australia and New Zealand, 0.006 and 0.075 mg/L of guideline values for Au(3+) were obtained by dividing 0.33 and 4.46 mg/L of HC5 and HC50 species sensitivity distributions (SSD) with an FACR (Final Acute to Chronic Ratio) of 59.09. In contrast, the EC method uses an assessment factor (AF), with the 0.0006 mg/L guideline value for Au(3+) being divided with the 48-h EC50 value for 0.60 mg/L (the lowest toxicity value obtained from short term results) by an AF of 1000. The Au(3+) guideline value derived using an AF was more stringent than the SSD. We recommend that more toxicity data using various bioassays are required to develop more accurate ecological risk assessments. More chronic/long-term exposure studies on sensitive endpoints using additional fish species and invertebrates not included in the current dataset will be needed to use other derivation methods (e.g., US EPA and Canadian Type A) or the "High Reliability Method" from Australia/New Zealand. Such research would facilitate the establishment of guideline values for various pollutants that reflect the universal effects of various pollutants in aquatic ecosystems. To the best of our knowledge, this is the first study to suggest guideline values for Au(3+) levels permitted to enter freshwater environments.

N-heterocyclic carbene gold(I) and copper(I) complexes in C-H bond activation

Environmental concerns have and will continue to have a significant role in determining how chemistry is carried out. Chemists will be challenged to develop new, efficient synthetic processes that have the fewest possible steps leading to a target molecule, the goal being to decrease the amount of waste generated and reduce energy use. Along this path, chemists will need to develop highly selective reactions with atom-economical pathways producing nontoxic byproduct. In this context, C-H bond activation and functionalization is an extremely attractive method. Indeed, for most organic transformations, the presence of a reactive functionality is required. In Total Synthesis, the "protection and deprotection" approach with such reactive groups limits the overall yield of the synthesis, involves the generation of significant chemical waste, costs energy, and in the end is not as green as one would hope. In turn, if a C-H bond functionalization were possible, instead of the use of a prefunctionalized version of the said C-H bond, the number of steps in a synthesis would obviously be reduced. In this case, the C-H bond can be viewed as a dormant functional group that can be activated when necessary during the synthetic strategy. One issue increasing the challenge of such a desired reaction is selectivity. The cleavage of a C-H bond (bond dissociation requires between 85 and 105 kcal/mol) necessitates a high-energy species, which could quickly become a drawback for the control of chemo-, regio-, and stereoselectivity. Transition metal catalysts are useful reagents for surmounting this problem; they can decrease the kinetic barrier of the reaction yet retain control over selectivity. Transition metal complexes also offer important versatility in having distinct pathways that can lead to activation of the C-H bond. An oxidative addition of the metal in the C-H bond, and a base-assisted metal-carbon bond formation in which the base can be coordinated (or not) to the metal complexes are possible. These different C-H bond activation modes provide chemists with several synthetic options. In this Account, we discuss recent discoveries involving the versatile NHC-gold(I) and NHC-copper(I) hydroxide complexes (where NHC is N-heterocyclic carbene) showing interesting Brønsted basic properties for C-H bond activation or C-H bond functionalization purposes. The simple and easy synthesis of these two complexes involves their halide-bearing relatives reacting with simple alkali metal hydroxides. These complexes can react cleanly with organic compounds bearing protons with compatible pK(a) values, producing only water as byproduct. It is a very simple protocol indeed and may be sold as a C-H bond activation, although the less flashy "metalation reaction" also accurately describes the process. The synthesis of these complexes has led us to develop new organometallic chemistry and catalysis involving C-H bond activation (metalation) and subsequent C-H bond functionalization. We further highlight applications with these reactions, in areas such as photoluminescence and biological activities of NHC-gold(I) and NHC-copper(I) complexes.

Luminescent di- and polynuclear organometallic gold(I)-metal (Au2, {Au2Ag}n and {Au2Cu}n) compounds containing bidentate phosphanes as active antimicrobial agents

The reaction of new dinuclear gold(I) organometallic complexes containing mesityl ligands and bridging bidentate phosphanes [Au(2)(mes)(2)(μ-LL)] (LL=dppe: 1,2-bis(diphenylphosphano)ethane 1a, and water-soluble dppy: 1,2-bis(di-3-pyridylphosphano)ethane 1b) with Ag(+) and Cu(+) lead to the formation of a family of heterometallic clusters with mesityl bridging ligands of the general formula [Au(2)M(μ-mes)(2) (μ-LL)][A] (M=Ag, A=ClO(4)(-), LL=dppe 2a, dppy 2b; M=Ag, A=SO(3)CF(3)(-), LL=dppe 3a, dppy 3b; M=Cu, A=PF(6)(-), LL=dppe 4a, dppy 4b). The new compounds were characterized by different spectroscopic techniques and mass spectrometry The crystal structures of [Au(2)(mes)(2)(μ-dppy)] (1b) and [Au(2)Ag(μ-mes)(2)(μ-dppe)][SO(3)CF(3)] (3a) were determined by a single-crystal X-ray diffraction study. 3a in solid state is not a cyclic trinuclear Au(2)Ag derivative but it gives an open polymeric structure instead, with the {Au(2)(μ-dppe)} fragments "linked" by {Ag(μ-mes)(2)} units. The very short distances of 2.7559(6) Å (Au-Ag) and 2.9229(8) Å (Au-Au) are indicative of gold-silver (metallophilic) and aurophilic interactions. A systematic study of their luminescence properties revealed that all compounds are brightly luminescent in solid state, at room temperature (RT) and at 77 K, or in frozen DMSO solutions with lifetimes in the microsecond range and probably due to the self-aggregation of [Au(2)M(μ-mes)(2)(μ-LL)](+) units (M=Ag or Cu; LL=dppe or dppy) into an extended chain structure, through Au-Au and/or Au-M metallophilic interactions, as that observed for 3a. In solid state the heterometallic Au(2)M complexes with dppe (2a-4a) show a shift of emission maxima (from ca. 430 to the range of 520-540 nm) as compared to the parent dinuclear organometallic product 1a while the complexes with dppy (2b-4b) display a more moderate shift (505 for 1b to a max of 563 nm for 4b). More importantly, compound [Au(2)Ag(μ-mes)(2)(μ-dppy)]ClO(4) (2b) resulted luminescent in diluted DMSO solution at room temperature. Previously reported compound [Au(2)Cl(2)(μ-LL)] (LL dppy 5b) was also studied for comparative purposes. The antimicrobial activity of 1-5 and Ag[A] (A=ClO(4)(-), SO(3)CF(3)(-)) against gram-positive and gram-negative bacteria and yeast was evaluated. Most tested compounds displayed moderate to high antibacterial activity while heteronuclear Au(2)M derivatives with dppe (2a-4a) were the more active (minimum inhibitory concentration 10 to 1 μg mL(-1)). Compounds containing silver were ten times more active to gram-negative bacteria than the parent dinuclear compound 1a or silver salts. Au(2)Ag compounds with dppy (2b, 3b) were also potent against fungi.