Actinide oxalates, solid state structures and applications

Reductive hydrothermal conversion of uranyl oxalates into UO2+x monitored by in situ XANES analyses

Hydrothermal conversion of actinide oxalates has recently gained attention as an innovative fabrication route for nuclear fuels but has remained mainly limited to tetra- or tri-valent cations. We report herein the reductive conversion of mixtures of uranyl and oxalate ions into UO2+x oxides under mild hydrothermal conditions (T = 250 °C). A multi-parametric study first led to specifying the optimal conditions in terms of pH, oxalate/U ratio and duration to provide a quantitative precipitation of uranium in the hyper-stoichiometric dioxide form with pH = 0.8; R = noxalate/nU = 3, and t = 72 hours. Particularly, pH was evidenced as a key parameter, with 3 different compounds obtained over a range of only 0.4 units. The mechanism leading to the formation of UO2+x was then investigated thanks to an in situ XANES study. Analysis of the supernatant showed that U(VI) was quickly reduced into U(IV) thanks to the presence of oxalates and/or their decomposition products in solution, following first-order kinetics. Tetravalent uranium was then hydrolysed, leading to the precipitation of UO2+x as the only crystalline phase. This study thus demonstrates that the hydrothermal conversion of actinide oxalates into oxides is an extremely versatile tool that can be implemented in a large variety of chemical systems, particularly in terms of the oxidation state of the cations initially present in solution.

High-Resolution 17O Solid-State NMR as a Unique Probe for Investigating Oxalate Binding Modes in Materials: The Case Study of Calcium Oxalate Biominerals

Oxalate ligands are found in many classes of materials, including energy storage materials and biominerals. Determining their local environments at the atomic scale is thus paramount to establishing the structure and properties of numerous phases. Here, we show that high-resolution 17O solid-state NMR is a valuable asset for investigating the structure of crystalline oxalate systems. First, an efficient 17O-enrichment procedure of oxalate ligands is demonstrated using mechanochemistry. Then, 17O-enriched oxalates were used for the synthesis of the biologically relevant calcium oxalate monohydrate (COM) phase, enabling the analysis of its structure and heat-induced phase transitions by high-resolution 17O NMR. Studies of the low-temperature COM form (LT-COM), using magnetic fields from 9.4 to 35.2 T, as well as 13C-17O MQ/D-RINEPT and 17O{1H} MQ/REDOR experiments, enabled the 8 inequivalent oxygen sites of the oxalates to be resolved, and tentatively assigned. The structural changes upon heat treatment of COM were also followed by high-resolution 17O NMR, providing new insight into the structures of the high-temperature form (HT-COM) and anhydrous calcium oxalate α-phase (α-COA), including the presence of structural disorder in the latter case. Overall, this work highlights the ease associated with 17O-enrichment of oxalate oxygens, and how it enables high-resolution solid-state NMR, for "NMR crystallography" investigations.

Pu(VI) Oxalate Crystal Structure and Evidence of Photoreduction to Pu(IV) Oxalate

We report the first crystal structure of a Pu(VI)-oxalate compound. This compound, [PuO2(C2O4)(H2O)]·2(H2O) (1), crystallizes in space group P21/c with a = 5.5993(3) Å, b = 16.8797(12) Å, c = 9.3886(6) Å, and β = 98.713(6)°. It is isostructural with the previously reported U(VI) compound, [UO2(C2O4)(H2O)]·2(H2O). Each plutonyl ion (PuO22+) is coordinated in the equatorial plane by two side-on bidentate oxalates, creating an infinite chain along [001]. A coordinated water molecule and twisting of the oxalates lead to a distorted pentagonal bipyramidal geometry of the Pu. A photochemical degradation was observed for 1, which resulted in the formation of a secondary crystalline phase. The absorption spectrum of this secondary phase confirmed the presence of Pu(IV), but it did not match the spectrum of Pu(C2O4)2·6H2O, which is considered to be the primary product of Pu-oxalate precipitation. While compound 1 has previously been proposed to exist in solution, this is the first time it has been isolated via crystallization. Although redox interactions between Pu and oxalate have been documented in the literature, the present study is the first observation of a photochemical reduction of Pu(VI)-oxalate. As a result, this study has expanded on the limited understanding of the Pu(VI)-oxalate system, which is important for nuclear fuel cycle applications.

A spectrophotometric study of the impact of pH and metal-to-ligand ratio on the speciation of the Pu(VI)-oxalate system

The oxalate ligand is prevalent throughout the nuclear fuel cycle. While the Pu(III)- and Pu(IV)-oxalate systems are well studied due to their use in plutonium metal and PuO2 production, the effect of oxalate on Pu(VI) remains understudied. Absorption spectroscopy was employed to probe the solution behavior of the Pu(VI)-oxalate system as a function of pH (1, 3, 7) and metal-to-ligand ratio (M/L; 10 : 1-1 : 10). Peak changes in the UV-vis-NIR spectra were associated with the formation of multiple Pu(VI)-oxalate species with increasing oxalate concentration. Some insight into identification of species present in solution was gained from the limited Pu(VI)-oxalate literature and comparisons with the assumed isostructural U(VI)-oxalate system. A peak in the UV-vis-NIR spectrum at 839 nm, which corresponds to the formation of a 1 : 1 PuO2(C2O4)(aq) complex, was observed and used to determine the formation constant (log β° = 4.64 ± 0.06). A higher coordinated Pu(VI)-oxalate peak at 846 nm was tentatively assigned as the 1 : 2 complex PuO2(C2O4)22- and a preliminary formation constant was determined (log β° = 9.30 ± 0.08). The predominance of both complexes was shown in speciation diagrams calculated from the formation constants, illustrating the importance of considering the Pu(VI)-oxalate system in the nuclear fuel cycle.

Insight into the Structural Ambiguity of Actinide(IV) Oxalate Sheet Structures: A Case for Alternate Coordination Geometries

Plutonium(IV) oxalate hexahydrate (Pu(C2 O4 )2  ⋅ 6 H2 O; PuOx) is an important intermediate in the recovery of plutonium from used nuclear fuel. Its formation by precipitation is well studied, yet its crystal structure remains unknown. Instead, the crystal structure of PuOx is assumed to be isostructural with neptunium(IV) oxalate hexahydrate (Np(C2 O4 )2  ⋅ 6 H2 O; NpOx) and uranium(IV) oxalate hexahydrate (U(C2 O4 )2  ⋅ 6 H2 O; UOx) despite the high degree of unresolved disorder that exists when determining water positions in the crystal structures of the latter two compounds. Such assumptions regarding the isostructural behavior of the actinide elements have been used to predict the structure of PuOx for use in a wide range of studies. Herein, we report the first crystal structures for PuOx and Th(C2 O4 )2  ⋅ 6 H2 O (ThOx). These data, along with new characterization of UOx and NpOx, have resulted in the full determination of the structures and resolution of the disorder around the water molecules. Specifically, we have identified the coordination of two water molecules with each metal center, which necessitates a change in oxalate coordination mode from axial to equatorial that has not been reported in the literature. The results of this work exemplify the need to revisit previous assumptions regarding fundamental actinide chemistry, which are heavily relied upon within the current nuclear field.

Catalytic reactions of oxalic acid degradation with Pt/SiO2 as a catalyst in nitric acid solutions

Large quantities of solutions containing oxalic acid and nitric acid are produced from nuclear fuel reprocessing, but oxalic acid must be removed before nitric acid and plutonium ions can be recovered in these solutions. The degradation of oxalic acid with Pt/SiO₂ as a catalyst in nitric acid solutions has the characteristics of a fast and stable reaction, recyclable catalyst, and no introduction of impurity ions into the system. This method is one of the preferred alternatives to the currently used reaction of KMnO₄ with oxalic acid but lacks theoretical support. Therefore, this study attempts to clarify the reaction mechanism of the method. First, there was no induction period for this catalytic reaction, and no evidence was found that the nitrous acid produced in the solution could have an effect on oxalic acid degradation. Furthermore, oxidation intermediates (structures of Pt-O) were formed through this reaction between NO₃^- adsorbed on the active sites and Pt on the catalyst surface, but H⁺ greatly promoted the reaction. Additionally, oxalic acid degradation through the oxidative dehydrogenation reaction occurred between oxalic acid molecules (HOOC-COOH) and Pt-O, with ·OOC-COOH, which is easily self-decomposable especially in acidic solution, generated simultaneously, and finally CO₂ was produced.

Influence of Sintering Conditions on the Structure and Redox Speciation of Homogeneous (U,Ce)O2+δ Ceramics: A Synchrotron Study

Although uranium-cerium dioxides are frequently used as a surrogate material for (U,Pu)O_2-δ nuclear fuels, there is currently no reliable data regarding the oxygen stoichiometry and redox speciation of the cations in such samples. In order to fill this gap, this manuscript details a synchrotron study of highly homogeneous (U,Ce)O_2±δ sintered samples prepared by a wet-chemistry route. HERFD-XANES spectroscopy led to determining accurately the O/M ratios (with M = U + Ce). Under a reducing atmosphere (pO₂ ≈ 6 × 10^-29 atm at 650 °C), the oxides were found to be close to O/M = 2.00, while the O/M ratio varied with the sintering conditions under argon (pO₂ ≈ 3 × 10^-6 atm at 650 °C). They globally appeared to be hyperstoichiometric (i.e., O/M > 2.00) with the departure from the dioxide stoichiometry decreasing with both the cerium content in the sample and the sintering temperature. Nevertheless, such a deviation from the ideal O/M = 2.00 ratio was found to generate only moderate structural disorder from EXAFS data at the U-L₃ edge as all the samples retained the fluorite-type structure of the UO₂ and CeO₂ parent compounds. The determination of accurate lattice parameters owing to S-PXRD measurements led to complementing the data reported in the literature by various authors. These data were consistent with an empirical relation linking the unit cell parameter, the chemical composition, and the O/M stoichiometry, showing that the latter can be evaluated simply within a ± 0.02 uncertainty.

Americium Oxalate: An Experimental and Computational Investigation of Metal-Ligand Bonding

A novel actinide-containing coordination polymer, [Am(C₂O₄)(H₂O)₃Cl] (Am-1), has been synthesized and structurally characterized. The crystallographic analysis reveals that the structure is two-dimensional and comprised of pseudo-dimeric Am³⁺ nodes that are bridged by oxalate ligands to form sheets. Each metal center is nine-coordinate, forming a distorted capped square antiprism geometry with a C₁ symmetry, and features bound oxalate, aqua, and chloro ligands. The Am³⁺-ligand bonds were probed computationally using the quantum theory of atoms in molecules nd natural localized molecular orbital approaches to investigate the underlying mechanisms and hybrid atomic orbital contributions therein. The analyses indicate that the bonds within Am-1 are predominantly ionic and the 5f shell of the Am³⁺ metal centers does not add a significant covalent contribution to the bonds. Our bonding assessment is supported by measurements on the optical properties of Am-1 using diffuse reflectance and photoluminescence spectroscopies. The position of the principal absorption band at 507 nm (⁵L_6' ← ⁷F_0') is notable because it is consistent with previously reported americium oxalate complexes in solution, indicating similarities in the electronic structure and ionic bonding. Compound Am-1 is an active phosphor, featuring strong bright-blue oxalate-based luminescence with no evidence of metal-centered emission.

Flexible Aliphatic Diammonioacetates as Zwitterionic Ligands in UO22+ Complexes: Diverse Topologies and Interpenetrated Structures

N,N,N',N'-Tetramethylethane-1,2-diammonioacetate (L1) and N,N,N',N'-tetramethylpropane-1,3-diammonioacetate (L2) are two flexible zwitterionic dicarboxylates which have been used as ligands for the uranyl ion, 12 complexes having been obtained from their coupling to diverse anions, mostly anionic polycarboxylates, or oxo, hydroxo and chlorido donors. The protonated zwitterion is a simple counterion in [H₂L1][UO₂(2,6-pydc)₂] (1), where 2,6-pydc^2- is 2,6-pyridinedicarboxylate, but it is deprotonated and coordinated in all the other complexes. [(UO₂)₂(L2)(2,4-pydcH)₄] (2), where 2,4-pydc^2- is 2,4-pyridinedicarboxylate, is a discrete, binuclear complex due to the terminal nature of the partially deprotonated anionic ligands. [(UO₂)₂(L1)(ipht)₂]·4H₂O (3) and [(UO₂)₂(L1)(pda)₂] (4), where ipht^2- and pda^2- are isophthalate and 1,4-phenylenediacetate, are monoperiodic coordination polymers in which central L1 bridges connect two lateral strands. Oxalate anions (ox^2-) generated in situ give [(UO₂)₂(L1)(ox)₂] (5) a diperiodic network with the hcb topology. [(UO₂)₂(L2)(ipht)₂]·H₂O (6) differs from 3 in being a diperiodic network with the V₂O₅ topological type. [(UO₂)₂(L1)(2,5-pydc)₂]·4H₂O (7), where 2,5-pydc^2- is 2,5-pyridinedicarboxylate, is a hcb network with a square-wave profile, while [(UO₂)₂(L1)(dnhpa)₂] (8), where dnhpa^2- is 3,5-dinitro-2-hydroxyphenoxyacetate, formed in situ from 1,2-phenylenedioxydiacetic acid, has the same topology but a strongly corrugated shape leading to interdigitation of layers. (2R,3R,4S,5S)-Tetrahydrofurantetracarboxylic acid (thftcH₄) is only partially deprotonated in [(UO₂)₃(L1)(thftcH)₂(H₂O)] (9), which crystallizes as a diperiodic polymer with the fes topology. [(UO₂)₂Cl₂(L1)₃][(UO₂Cl₃)₂(L1)] (10) is an ionic compound in which discrete, binuclear anions cross the cells of the cationic hcb network. 2,5-Thiophenediacetate (tdc^2-) is peculiar in promoting self-sorting of the ligands in the ionic complex [(UO₂)₅(L1)₇(tdc)(H₂O)][(UO₂)₂(tdc)₃]₄·CH₃CN·12H₂O (11), which is the first example of heterointerpenetration in uranyl chemistry, involving a triperiodic, cationic framework and diperiodic, anionic hcb networks. Finally, [(UO₂)₇(O)₃(OH)_4.3Cl_2.7(L2)₂]Cl·7H₂O (12) crystallizes as a 2-fold interpenetrated, triperiodic framework in which chlorouranate undulating monoperiodic subunits are bridged by the L2 ligands. Complexes 1, 2, 3, and 7 are emissive with photoluminescence quantum yields in the range of 8-24%, and their solid-state emission spectra show the usual dependence on number and nature of donor atoms.

Synthesis of Nanocrystalline PuO2 by Hydrothermal and Thermal Decomposition of Pu(IV) Oxalate: A Comparative Study

In recent years, the hydrothermal conversion of actinide (IV) oxalates into nanometric actinide dioxides (AnO₂) has begun to be investigated as an alternative to the widely implemented thermal decomposition method. We present here a comparison between the hydrothermal and the conventional thermal decomposition of Pu(IV) oxalate in terms of particle size, morphology and residual carbon content. A parametric study was carried out in order to define the temperature and time applied in the hydrothermal conversion of tetravalent Pu-oxalate into PuO₂ and to optimize the reaction conditions.

Synthesis, Crystal Packing Aspects and Pseudosymmetry in Coordination Compounds with a Phosphorylamide Ligand

This work reports the synthesis and crystal structure of new closely related coordination compounds, [ML2]·nTHF, where M is Zn or Mn; L is a phosphorylmethylamide derivative of benzothiadiazole; n = 1 (M = Zn) and 1, 2 (M = Mn); and THF is tetrahydrofuran. The zinc compound, 1·THF, crystallizes in a high-symmetry space group, I41/a, that is relatively rare for compounds with organic ligands. The corresponding manganese congener, 2·THF, with a similar crystal packing, features a pseudosymmetrical structure P21/c of the doubled volume of the unit cell as compared to 1·THF. The main difference between the structures lies in a different arrangement of solvate THF molecules, which likely modulates the crystal packing of the complexes. Another manganese solvatomorph, 2·2THF, reveals a fundamentally different crystal packing while exhibiting a similar geometry of the complex. We consider the problem of localization of solvate THF molecules and the types of their disorder by the example of compounds 1–2.

Structural and Bonding Analysis in Monomeric Actinide(IV) Oxalate from Th(IV) to Pu(IV): Comparison with the An(IV) Nitrate Series

Single-crystal X-ray diffraction (SC-XRD) structures and Raman spectra of a series of new isomorphous molecular An(IV)-oxalate compounds (Th, U, Np, and Pu) are reported. These complexes are crystallized with cobalt(III) hexamine ([Co(NH₃)₆]³⁺) as the counter cations, [Co(NH₃)₆]₂[An(C₂O₄)₅]·4H₂O, revealing five bidentate nonbridging oxalate ligands in the first coordination sphere (CN = 10). The nonbridging oxalate is rather uncommon for An(IV)-oxalate systems, which are widely characterized as polymeric compounds. Density functional theory (DFT) calculations were performed to examine the bonding between An(IV) cations and oxalate ligands. For comparison, we also report results obtained for the An(IV)-hexanitrate series, [(C₂H₅)₄N]₂[An(NO₃)₆] (with An = Th, U, Np, Pu, and Ce), which consists of O-donor ligands as well but with a larger coordination number (CN = 12). The bonding analysis confirms that the actinide-oxygen bond is predominantly ionic with a minor increase in covalency from Th to U and slight variations from U to Pu. Further comparison showed that the charge transfer increases slightly when increasing the number of anions in the coordination sphere (C₂O₄^2-: CN = 10; NO₃^-: CN = 12), but covalent effects as indicated by the amount of internuclear electron density accumulation are small and similar for oxalate and nitrate.

Using molybdenum carbiding to induce digestion of carbon in H2O2: A sustainable approach to eliminate radioactivity for hazardous graphite waste inherited from nuclear enterprise

To properly manage nuclear wastes is critical to sustainable utilization of nuclear power and environment health. Here, we show an innovative carbiding strategy for sustainable management of radioactive graphite through digestion of carbon in H₂O₂. The combined action of intermolecular oxidation of graphite by MoO₃ and molybdenum carbiding demonstrates success in gasifying graphite and sequestrating uranium for a simulated uranium-contaminated graphite waste. The carbiding process plays a triple role: (1) converting graphite into atomic carbon digestible in H₂O₂, (2) generating oxalic ligands in the presence of H₂O₂ to favor U-precipitation, and (3) delivering oxalic ligands to coordinate to Mo^VI-oxo anionic species to improve sample batching capacity. We demonstrate > 99% of uranium to be sequestrated for the simulated waste with graphite matrix completely gasifying while no detectable U-migration occurred during operation. This method has further been extended to removal of surface carbon layers for graphite monolith and thus can be used to decontaminate monolithic graphite waste with emission of a minimal amount of secondary waste. We believe this work not only provides a sustainable approach to tackle the managing issue of heavily metal contaminated graphite waste, but also indicates a promising methodology toward surface decontamination for irradiated graphite in general.

Homogeneous Precipitation of Lanthanide Oxalates

Oxalic acid is an important separation agent in the technology of lanthanides, actinides, and transition metals. Thanks to the low solubility of the oxalate salts, the metal ions can be easily precipitated into crystalline material, which is a convenient precursor for oxide preparation. However, it is difficult to obtain oxalate monocrystals due to the fast precipitation. We have developed a synthetic route for homogeneous precipitation of oxalates based on the thermal decomposition of oxamic acid. This work primarily concerns lanthanide oxalates; however, since no information was found about oxamic acid, a brief characterization was included. The precipitation method was tested on selected elements (Ce, Pr, Gd, Er, and Yb), for which the kinetics was determined at 100 °C. Several scoping tests at 90 °C or using different starting concentrations were performed on Ce and Gd. The reaction products were studied by means of solid-state analysis with focus on the structure and morphology. Well-developed microcrystals were successfully synthesized with the largest size for gadolinium oxalate.

Revisiting Reduction of CO2 to Oxalate with First-Row Transition Metals: Irreproducibility, Ambiguous Analysis, and Conflicting Reactivity

Construction of higher C_≥2 compounds from CO₂ constitutes an attractive transformation inspired by nature's strategy to build carbohydrates. However, controlled C-C bond formation from carbon dioxide using environmentally benign reductants remains a major challenge. In this respect, reductive dimerization of CO₂ to oxalate represents an important model reaction enabling investigations on the mechanism of this simplest CO₂ coupling reaction. Herein, we present common pitfalls encountered in CO₂ reduction, especially its reductive coupling, based on established protocols for the conversion of CO₂ into oxalate. Moreover, we provide an example to systematically assess these reactions. Based on our work, we highlight the importance of utilizing suitable orthogonal analytical methods and raise awareness of oxidative reactions that can likewise result in the formation of oxalate without incorporation of CO₂. These results allow for the determination of key parameters, which can be used for tailoring of prospective catalytic systems and will promote the advancement of the entire field.

State-of-the-art progress for the selective crystallization of actinides, synthesis of actinide compounds and their functionalization

Crystallization and immobilization of actinides to form actinide compounds are of significant importance for the extraction and reutilization of nuclear waste in the nuclear industry. In this paper, the state-of-art progress in the crystallization of actinides are summarized, as well as the main functionalization of the actinide compounds, i.e., as adsorbents for heavy metal ions and organic pollutant in waste management, as (photo)catalysts for organic degradation and conversion, including degradation of organic dyes and antibiotics, dehydrogenation of N-heterocycles, CO₂ cycloaddition, selective alcohol oxidation and selective oxidation of sulfides. This review will give a comprehensive summary about the synthesis and application exploration of solid actinide crystalline salts and actinide-based metal organic frameworks in the past decades. Finally, the future perspectives and challenges are proposed in the end to give a promising direction for future investigation.

Coprecipitation of actinides peroxide salts in the U-Th and U-Pu systems and their thermal decomposition

Uranium and plutonium coconversion process constitutes a continuous subject of interest for MOx fuel fabrication. Among the various routes considered, chemical coprecipitation by salt effect has been widely investigated regarding...

Towards Sustainable Oxalic Acid from CO2 and Biomass

To quickly and drastically reduce CO2 emissions and meet our ambitions of a circular future, we need to develop carbon capture and storage (CCS) and carbon capture and utilization (CCU) to deal with the CO2 that we produce. While we have many alternatives to replace fossil feedstocks for energy generation, for materials such as plastics we need carbon. The ultimate circular carbon feedstock would be CO2 . A promising route is the electrochemical reduction of CO2 to formic acid derivatives that can subsequently be converted into oxalic acid. Oxalic acid is a potential new platform chemical for material production as useful monomers such as glycolic acid can be derived from it. This work is part of the European Horizon 2020 project "Ocean" in which all these steps are developed. This Review aims to highlight new developments in oxalic acid production processes with a focus on CO2 -based routes. All available processes are critically assessed and compared on criteria including overall process efficiency and triple bottom line sustainability.

The influence of piperazine diamine templates on the synthesis, structures and properties of uranyl oxalate complex

As an important nuclear material, uranium is one of the most concerned elements in the nuclear fuel cycle, which could interact with many inorganic and organic ligands. Amine templates have a significant structural-oriented effect on the construction of uranyl oxalate complex. In this work, the piperazine diamine templates were used to synthesize uranyl oxalate complex and their crystal structures were resolved by single crystal diffraction, and their spectra were studied by IR, Raman, UV–vis, fluorescence, and EPR techniques. The final results show that crystal structures, properties and applications of uranyl oxalate complex have a close correlation with polyamine templates. The single crystal structure results show that the structural-oriented effect of piperazine diamine template is greatly affected by the proportion and concentration of solute in the surrounding environment. And the alkyl substituents on N atoms of amine templates are related to the tight of structures. Interestingly, 5# has a potential application as the original material for multiple reuse of fluorescent sensor materials. At present, there is no clear and in-depth study on the internal mechanism of such phenomena in solid uranyl complexes, and the specific mechanism needs to be further explored.

Multiple investigations of aqueous Eu(III)-oxalate complexes: the reduction in coordination number and validation of spectral linear correlation

Detailed information on the An(iii)/Ln(iii) complexation properties in solution is essential for separation chemistry and the prediction of their potential for radionuclide migration from nuclear waste repositories into natural aquifers. In the present study, to better reveal and confirm the structural information of [Eu(Ox)x (H2O)h-2x]3-2x (h = 8, 9; x = 0-3) aqueous species, especially the variable coordination number (CN), and explore the validity of the spectral linear correlation between the luminescence lifetime and the residual hydration number in the first coordination sphere of Eu(iii) compounds in solution, a comparison between the spectral results and the theoretical calculations in a wide parametric space in terms of the pH value and oxalate concentration was carried out by combining time-resolved luminescence spectroscopy (TRLS) with speciation modelling and density functional theory (DFT) calculations. We have found direct and clear evidence for the 9-fold to 8-fold coordination number reduction of Eu(iii) atoms upon coordination with more than one oxalate in an aqueous medium, and as well systematically validated the applicability of the spectral linear correlation in an aqueous system (otherwise solid state) involving multiple species with the support of relatively reliable and clear speciation modelling.

Supercritical hydrothermal synthesis of UO2+x: stoichiometry, crystal shape and size, and homogeneity observed using 23Na-NMR spectroscopy of (U, Na)O2+x

The hydrothermal synthesis of pure uranium dioxide under supercritical water (SCW) conditions was investigated using a starting material composed of a uranyl(vi) nitrate solution at 450 °C.

Synthesis, Structure, and Electrochemical Properties of Some Cobalt Oxalates

Transition-metal oxalates have wide applications in magnetics, photoemission, electrochemistry, etc. Herein, using hydrothermal reactions, five cobalt(II) oxalates, Na₂Co₂(C₂O₄)₃·2H₂O (I), Na₂Co(C₂O₄)₂·8H₂O (II), KLi₃Co(C₂O₄)₃ (III), Li₄Co(C₂O₄)₃ (IV), and (NH₄)₂Co₂(C₂O₄)F₄ (V) have been synthesized, and their structures are determined from single-crystal X-ray diffraction or Rietveld refinement of powder X-ray diffraction data. Notably, IV and V are identified for the first time. The structures of these cobalt oxalates are versatile, covering 0D, 1D, 2D, and 3D frameworks, while the coordination environments of Co²⁺ centers are uniquely distorted octahedra. As representative examples, I and III are investigated as cathode materials for secondary batteries. Both exhibited electrochemical activity despite large cell polarization. The present study enriches the transition-metal oxalate family and provides new options for energy storage materials.

Hydrothermal Conversion of Thorium Oxalate into ThO2·nH2O Oxide

Hydrothermal conversion of thorium oxalate, Th(C₂O₄)₂·nH₂O, into thorium dioxide was explored through a multiparametric study, leading to some guidelines for the preparation of crystallized samples with the minimum amount of impurities. As the formation of the oxide appeared to be operated through the hydrolysis of Th⁴⁺ after decomposition of oxalate fractions, pH values typically above 1 must be considered to recover a solid phase. Also, because of the high stability of the thorium oxalate precursor, hydrothermal treatments of more than 5 h at a temperature above 220 °C were required. All the ThO₂·nH₂O samples prepared presented amounts of residual carbon and water in the range 0.2-0.3 wt % and n ≈ 0.5, respectively. A combined FTIR, PXRD, and EXAFS study showed that these impurities mainly consisted of carbonates trapped between elementary nanosized crystallites, rather than substituted directly in the lattice, which generated a tensile effect over the crystal lattice. The presence of carbonates at the surface of the elementary crystallites could also explain their tendency to self-assembly, leading to the formation of spherical aggregates. Hydrothermal conversion of oxalates could then find its place in different processes of the nuclear fuel cycle, where it will provide an interesting opportunity to set up dustless routes leading from ions in solution to dioxide powders in a limited number of steps.

Quantitative Precipitation of Uranyl or Plutonyl Nitrate with N-(1-Adamantyl)acetamide in Nitric Acid Aqueous Solution

The reactivity of the N-(1-adamantyl)acetamide ligand (L = adam) has been evaluated as precipitating agent for the hexavalent uranyl cation ([U] = 20-60 g L^-1) in concentrated nitric acid aqueous solution (0.5-5 M). It results in the formation of a crystalline complex (UO₂)(adam)₂(NO₃)₂·2(adam) (1), in which the uranyl center is 8-fold coordinated to two chelating nitrate groups and two N-(1-adamantyl)acetamide (= adam) ligands through the oxygen atom of the amide function. Two other noncoordinating adam moieties are also observed in the crystal structure packing and interact through a hydrogen-bond scheme with the uranyl-centered species. A similar molecular assembly has been obtained with the plutonyl(VI) cation, in the complex (PuO₂)(adam)₂(NO₃)₂·2(adam) (2). Precipitation studies indicate high (UO₂)(adam)₂(NO₃)₂·2(adam) formation yields (up to 99%_U for an L/U molecular ratio of 5/1) for HNO₃ concentration in the 0.5-5 M range. However, the precipitation kinetics is rather slow and the reaction is completed after several hours (3-4 h). The calcination of the resulting solid under an air atmosphere led to the formation of the U₃O₈ oxide from 400 °C through a transient phase UO₂ fluorite-type (from 200 °C).

Organic Functionalization of Uranyl Peroxide Clusters to Impact Solubility

Benzene-1,2-diphosphonic acid (Ppb) was introduced into the uranyl peroxide cluster system, resulting in three Ppb-functionalized uranyl peroxide clusters, (UO₂)₂₀(O₂)₂₀(C₆H₄P₂O₆)₁₀^40- (U₂₀Ppb₁₀), (UO₂)₂₆(O₂)₃₃(C₆H₄P₂O₆)₆^38- (U₂₆Ppb₆), and (UO₂)₂₀(O₂)₂₄(C₆H₄P₂O₆)₆^32- (U₂₀Ppb₆). Dissolution experiments were performed for the potassium salts of U₂₀Ppb₁₀ and U₂₆Ppb₆, which revealed the capacity of U₂₀Ppb₁₀ to dissolve in the organic solvent dimethyl sulfoxide (DMSO). Unlike U₂₀Ppb₁₀, the K salt of U₂₆Ppb₆ did not dissolve in DMSO but was more soluble in water, perhaps due to the lower proportion of Ppb ligands in its structure. In this work, U₂₀Ppb₁₀ and U₂₀Ppb₆ formed as potassium salts and both adopt the fullerene topology of previously reported U₂₀. U₂₀ contains 20 uranyl peroxide units and encapsulates 12 Na cations. It is not possible for unfunctionalized U₂₀ to incorporate 12 K cations owing to space constraints, as is the case in the new clusters reported here. Transformation of U₂₀Ppb₁₀ in water over time to produce U₂₄ was observed, possibly owing to its ability to incorporate K cations, which have been associated with the formation of U₂₄.

Kinked-Helix Actinide Polyrotaxanes from Weakly Bound Pseudorotaxane Linkers with Variable Conformations

The incorporation of a mechanically interlocked molecule such as pseudorotaxane into metal-organic coordination polymers has afforded plenty of new hybrid materials with special structures and unique properties. In this work, we employ a weakly bound cucurbit[6]uril (CB[6])-bipyridinium pseudorotaxane as a supramolecular precursor to assemble with uranyl, aiming to construct uranyl-rotaxane coordination polymers (URCPs) with intriguing structures. By adjusting the synthetic conditions, a new kinked-helix uranyl rotaxane compound (URCP3), together with three other compounds URCP1, URCP2, and URCP4 varying from 1D chains to 2D interwoven networks, was obtained. Detailed structural analyses indicate that the pseudorotaxane ligand (C8BPCA@CB[6]) shows great configuration diversity in the construction of URCPs, which is most probably due to the weak binding strength between the host and guest molecules. Specifically, based on the monodentate coordination of the end carboxyl groups of C8BPCA forced by the surrounding unilaterally-chelated oxalate, the entire flexible pseudorotaxane linker will be more likely to undergo conformational change, thereby binding to the uranyl center from both sides of the uranyl equatorial plane and promoting the formation of a kinked helix structure of URCP3 that is shaped like a Chinese knot along [001]. This work enriches the library of actinide-rotaxane compounds and provides a new approach to construct metal-organic compounds with complicated structures using weakly bonded pseudorotaxanes as well.

Crystal structure and Hirshfeld surface analysis of 1,2,4-triazolium hydrogen oxalate

The asymmetric unit of the title 1:1 salt 1,2,4-triazolium hydrogen oxalate, C2H4N3 +·C2HO4 - (I), comprises one 1,2,4-triazolium cation and one hydrogen oxalate anion. In the crystal, the hydrogen oxalate anions are linked by O-H⋯O hydrogen bonds into chains running parallel to [100]. In turn, the anionic chains are linked through the 1,2,4-triazolium cations by charge-assisted +N-H⋯O- hydrogen bonds into sheets aligned parallel to (01). The sheets are further stacked through π-π inter-actions between the 1,2,4-triazolium rings [centroid-to-centroid distance = 3.642 (3) Å, normal distance = 3.225 (3) Å, slippage 1.691 Å], resulting in the formation of a three-dimensional supra-molecular network. Hirshfeld surface analysis of the title salt suggests that the most significant contributions to the crystal packing are by H⋯O/O⋯H and H⋯N/N⋯H contacts involving the hydrogen bonds.

γ-Radiation and H2O2 induced oxidative dissolution of uranium(iv) oxide in aqueous solution containing phthalic acid

This study aims to reveal possible involvements of organic acids in the oxidative dissolution of UO2. Using phthalic acid as a model compound, we have measured adsorption on UO2 and investigated effects on the reaction between H2O2 and UO2 and on oxidative dissolution induced by γ-irradiation. Significant adsorption of phthalic acid was observed even at neutral pH. However, the reaction between H2O2 and UO2 in phthalic acid solution induced oxidative dissolution of U(vi) similar to in aqueous bicarbonate solution. Moreover, degradation products of phthalic acid were not detected after the reaction of H2O2. These results indicate that even though phthalic acid adsorbs on the UO2 surface, it is not involved in the interfacial reaction of H2O2. In contrast, the dissolution of U by irradiation was inhibited in aqueous phthalic acid solution, whereas H2O2 generated by radiolysis was consumed by UO2. Based on these contrasting results, possible roles of radical species generated by water radiolysis were discussed.

Ultraviolet emission and electron spin characteristics of Th(C2O4)2·xH2O:Gd3+

UV emitting Gd³⁺ doped phosphors have recently attracted significant attention among materials scientists owing to their important applications in the areas of photothermal therapy, transilluminators and sensitizer based luminescent phosphors.

Biorecovery of cobalt and nickel using biomass-free culture supernatants from Aspergillus niger

In this research, the capabilities of culture supernatants generated by the oxalate-producing fungus Aspergillus niger for the bioprecipitation and biorecovery of cobalt and nickel were investigated, as was the influence of extracellular polymeric substances (EPS) on these processes. The removal of cobalt from solution was >90% for all tested Co concentrations: maximal nickel recovery was >80%. Energy-dispersive X-ray analysis (EDXA) and X-ray diffraction (XRD) confirmed the formation of cobalt and nickel oxalate. In a mixture of cobalt and nickel, cobalt oxalate appeared to predominate precipitation and was dependent on the mixture ratios of the two metals. The presence of EPS together with oxalate in solution decreased the recovery of nickel but did not influence the recovery of cobalt. Concentrations of extracellular protein showed a significant decrease after precipitation while no significant difference was found for extracellular polysaccharide concentrations before and after oxalate precipitation. These results showed that extracellular protein rather than extracellular polysaccharide played a more important role in influencing the biorecovery of metal oxalates from solution. Excitation–emission matrix (EEM) fluorescence spectroscopy showed that aromatic protein-like and hydrophobic acid-like substances from the EPS complexed with cobalt but did not for nickel. The humic acid-like substances from the EPS showed a higher affinity for cobalt than for nickel.

Cerium Oxalate Morphotypes: Synthesis and Conversion into Nanocrystalline Oxide

Cerium dioxide is a scientifically and technologically important material with a wide range of potential applications, particularly in solid oxide fuel cells and catalysis. Herein, we report a study focusing on the synthesis of nanocrystalline cerium dioxide via thermal decomposition of the oxalate salt. Simply by changing reaction conditions (temperature, concentration, acidity, strike) during the precipitation of the cerium solution with oxalic acid, we were able to obtain different morphologies. The main reaction parameters were mapped and linked to the morphology of the final products. Additionally, it was proved that oxalate precipitation is a robust reaction proceeding at relatively extreme contitions. Moreover, the conversion of cerium oxalate to nanocrystalline oxide was followed to monitor the progress of the reaction, the texture evolution, and the grain growth. The results showed that, for unvaried heating cycle, the grain size of converted material is linked to morphology. The thinner was the original microcrystal the smaller were the CeO₂ nanocrystals after calcination. In addition, the grains were found smaller near the edges of the ex-oxalate microcrystals. In both cases, this behavior results from asymmetrical limitations of diffusion during grain growth.

In situ Raman spectroscopy of uranyl peroxide nanoscale cage clusters under hydrothermal conditions

The behaviours of two uranyl peroxide nanoclusters in water heated to 180 °C were examined by in situ Raman spectroscopy.

Spectroscopic speciation of aqueous Am(iii)–oxalate complexes

Speciation, thermodynamic stability, and structural information of aqueous oxalato-Am(iii) complexes were resolved by combinatorial use of UV-Vis-LWCC, TRLFS, and DFT calculations.

Mechanical properties of anhydrous oxalic acid and oxalic acid dihydrate

The mechanical properties of oxalic acid dihydrate and anhydrous oxalic acid (α and β polymorphic forms) were obtained by using rigorous theoretical solid-state methods based on density functional theory using plane waves and pseudopotentials.

Spectroscopic and Computational Characterization of Diethylenetriaminepentaacetic Acid/Transplutonium Chelates: Evidencing Heterogeneity in the Heavy Actinide(III) Series

The chemistry of trivalent transplutonium ions (Am³⁺ , Cm³⁺ , Bk³⁺ , Cf³⁺ , Es³⁺ …) is usually perceived as monotonic and paralleling that of the trivalent lanthanide series. Herein, we present the first extended X-ray absorption fine structure (EXAFS) study performed on a series of aqueous heavy actinide chelates, extending past Cm. The results obtained on diethylenetriaminepentaacetic acid (DTPA) complexes of trivalent Am, Cm, Bk, and Cf show a break to much shorter metal-oxygen nearest-neighbor bond lengths in the case of Cf³⁺ . Corroborating those results, density functional theory calculations, extended to Es³⁺ , suggest that the shorter Cf-O and Es-O bonds could arise from the departure of the coordinated water molecule and contraction of the ligand around the metal relative to the other [M^III DTPA(H₂ O)]^2- (M=Am, Cm, Bk) complexes. Taken together, these experimental and theoretical results demonstrate inhomogeneity within the trivalent transplutonium series that has been insinuated and debated in recent years, and that may also be leveraged for future nuclear waste reprocessing technologies.

Synthesis and structural characterization of a series of uranyl-betaine coordination complexes

Trimethylglycine and betainium class ionic liquids were employed in synthesizing six uranyl-betaine coordination complexes: [(μ2-(CH3)N2C3H3(CH2COO))2 (UO2(Cl)((CH3)N2C3H3(CH2COO)))2] 2[N(SO2CF3)2] (1), [K][UO2(Cl)3((CH3)3NCH2COO)] (2), [(CH3)3NCH2COOH][UO2(Cl)3((CH3)3NCH2COO)]⋅H2O (3), [LiUO2(μ2-(CH3)3NCH2COO)4] 3[N(SO2CF3)2] (4) {(μ2-(CH3)3NCH2COO)UO2(NO3)2((CH3)3NCH2COO)}2 UO2(NO3)2, UO2(NO3)2(H2O)2⋅H2O (5), and UO2(Cl)2(H2O)(μ2-(CH3)3NCH2COO) (6). These complexes expound upon the variability of monocarboxyl-functionalized uranyl coordination complexes, providing an enhanced framework for investigations into the structural chemistry of analogous actinyl systems.