Multi-scale crystal engineering of metal organic frameworks

Metal-organic framework based self-powered devices for human body energy harvesting

The shift from traditional bulky electronics to smart wearable devices represents a crucial trend in technological advancement. In recent years, the focus has intensified on harnessing thermal and mechanical energy from human activities to power small wearable electronics. This vision has attracted considerable attention from researchers, with an emphasis on the development of suitable materials that can efficiently convert human body energy into usable electrical form. Metal-organic frameworks (MOFs), with their unique tunable structures, large surface areas, and high porosity, emerge as a promising material category for human body energy harvesting due to their ability to be precisely engineered at the molecular level, which allows for the optimization of their properties to suit specific energy harvesting needs. This article explores the progressive development of MOF materials, highlighting their potential in the realm of self-power devices for wearable applications. It first introduces the typical energy harvesting routes that are particularly suitable for harvesting human body energy, including thermoelectric, triboelectric, and piezoelectric techniques. Then, it delves into various research advances that have demonstrated the efficacy of MOFs in capturing and converting body-generated energy into electrical energy, emphasizing on the conceptual design, device fabrication, and applications in medical health monitoring, human-computer interaction, and motion monitoring. Furthermore, it discusses potential future directions for research in MOF-based self-powered devices and outlines perspectives that could drive breakthroughs in the efficiency and practicality of these devices.

Surface Coordination Modulated Morphological Anisotropic Engineering of Iron-Benzoquinone Frameworks for Lithium-Ion Batteries

Morphological anisotropic engineering is powerful to synthesize metal-organic frameworks (MOFs) with versatile physicochemical properties for diverse applications ranging from gas storage/separation to electrocatalysis and batteries, etc. Herein, we developed a carbon substrate guided strategy to manipulate the facet-dependent coordination for morphology engineering of Fe-THBQ (tetrahydroxy-1,4-benzoquinone) frameworks, which is built with cubic Fe octamer bridged by two parallel THBQ ligands along three orthogonal axes, extending to a three-dimensional (3D) framework with pcu-e network topology. The electronegative O-containing functional groups on carbon surfaces compete with THBQ linkers to selectively interact with the unsaturated coordinated Fe cations on the {111} facets and inhibit crystal growth along the <111> direction. The morphology of Fe-THBQ evolves from thermodynamically favored truncated cube to cuboctahedron depending on the content of O-containing functional groups on the carbon substrate. The Fe-THBQ with varied morphologies exhibits facet-dependent performances for electrochemical lithium storage. This work will shed light on the morphology modulation of MOFs for promising applications.

Nanomaterials-modified reverse osmosis membranes: a comprehensive review

Because of its great efficiency and widespread application, reverse osmosis (RO) is a popular tool for water desalination and purification. However, traditional RO membranes have a short lifespan due to membrane fouling, deterioration, decreased salt rejection rate, and the low water flux with aging. As a result, membrane modification has received a lot of attention recently, with nanomaterials being extensively researched to improve membrane efficacy and lifespan. Herein, we present an in-depth analysis of recent advances of RO membranes modification utilizing nanomaterials. An overview of the various nanomaterials used for membrane modification, including metal oxides, zeolites, and carbon nanomaterials, is provided. The synthesis techniques and methods of integrating these nanomaterials into RO membranes are also discussed. The impacts of nanomaterial change on the performance of RO membranes are addressed. The underlying mechanisms responsible for RO membrane enhancements by nanomaterials, such as improved surface hydrophilicity, reduced membrane fouling via surface repulsion and anti-adhesion properties, and enhanced structural stability, are discussed. Furthermore, the review provides a critical analysis of the challenges and limitations associated with the use of nanomaterials to modify RO membranes. Overall, this review provides valuable insights into the modification of RO membranes with nanomaterials, providing a full grasp of the benefits, challenges, and future prospects of this challenging topic.

Influence of Water Content on Speciation and Phase Formation in Zr-Porphyrin-Based MOFs

Controlled synthesis of phase-pure metal-organic frameworks (MOFs) is essential for their application in technological areas such as catalysis or gas sorption. Yet, knowledge of their phase formation and growth remain rather limited, particularly with respect to species such as water whose vital role in MOF synthesis is often neglected. As a consequence, synthetic protocols often lack reproducibility when multiple MOFs can form from the same metal source and linker, and phase mixtures are obtained with little or no control over their composition. In this work, the role of water in the formation of the Zr-porphyrin MOF disordered PCN-224 (dPCN-224) is investigated. Through X-ray total scattering and scanning electron microscopy, it is observed that dPCN-224 forms via a metal-organic intermediate that consists of Zr6O4(OH)4 clusters linked by tetrakis(4-carboxy-phenyl)porphyrin molecules. Importantly, water is not only essential to the formation of Zr6O4(OH)4 clusters, but it also plays a primary role in dictating the formation kinetics of dPCN-224. This multidisciplinary approach to studying the speciation of dPCN-224 provides a blueprint for how Zr-MOF synthesis protocols can be assessed and their reproducibility increased, and highlights the importance of understanding the role of water as a decisive component in Zr-MOF formation.

In Situ X-ray Scattering Reveals Coarsening Rates of Superlattices Self-Assembled from Electrostatically Stabilized Metal Nanocrystals Depend Nonmonotonically on Driving Force

Self-assembly of colloidal nanocrystals (NCs) into superlattices (SLs) is an appealing strategy to design hierarchically organized materials with promising functionalities. Mechanistic studies are still needed to uncover the design principles for SL self-assembly, but such studies have been difficult to perform due to the fast time and short length scales of NC systems. To address this challenge, we developed an apparatus to directly measure the evolving phases in situ and in real time of an electrostatically stabilized Au NC solution before, during, and after it is quenched to form SLs using small-angle X-ray scattering. By developing a quantitative model, we fit the time-dependent scattering patterns to obtain the phase diagram of the system and the kinetics of the colloidal and SL phases as a function of varying quench conditions. The extracted phase diagram is consistent with particles whose interactions are short in range relative to their diameter. We find the degree of SL order is primarily determined by fast (subsecond) initial nucleation and growth kinetics, while coarsening at later times depends nonmonotonically on the driving force for self-assembly. We validate these results by direct comparison with simulations and use them to suggest dynamic design principles to optimize the crystallinity within a finite time window. The combination of this measurement methodology, quantitative analysis, and simulation should be generalizable to elucidate and better control the microscopic self-assembly pathways of a wide range of bottom-up assembled systems and architectures.

Novel ZIF-8/CNC Nanohybrid with an Interconnected Structure: Toward a Sustainable Adsorbent for Efficient Removal of Cd(II) Ions

Water pollution, especially by heavy metals, continues to pose significant challenges, emphasizing the urgency to develop sustainable processes to remove pollutants while developing sustainable materials derived from renewable sources. In the present research, a nanoscale adsorbent was prepared to remove cadmium (Cd(II)) ions from wastewater by hybridizing zeolitic imidazolate framework-8 (ZIF-8) with a cellulose nanocrystal (CNC). The prepared nanohybrid exhibited an interconnected structure in which the ZIF-8 particles were connected to each other via CNC nanoneedles. The hybridization of ZIF-8 with CNC caused a significant enhancement in the adsorption performance of the fabricated nanohybrid compared to pure ZIF-8, increasing its adsorption capacity by nearly 36%. The adsorption of ZIF/CNC followed the Langmuir isotherm model and pseudo-second-order kinetics models, remarking homogeneous adsorption onto the surface of ZIF/CNC, where chemisorption controlled the rate of adsorption. The thermodynamic study uncovered that the adsorption is spontaneous, endothermic, and entropy-governed as the randomness was increased at the solid-liquid interface. Additionally, the influence of operating variables, such as temperature, adsorbent dosage, pH, and ionic strength, was studied to mimic the adsorption capabilities of the adsorbent in real conditions. Accordingly, the optimum conditions were found to be at 45 °C and pH = 7 with a dosage of 0.4 g/L for the adsorbent. Moreover, the adsorption in a multimetal solution showed that the ZIF/CNC nanohybrid can remove various heavy metals, including Cd(II), Fe(III), Cu(II), and Pb(II) ions simultaneously. Finally, the regeneration study confirmed the great potential of the ZIF/CNC nanohybrid, which retained 94% of its initial adsorption capacity after 5 consecutive adsorption/desorption cycles.

Base-Directed Formation of Isostructural Lanthanide-Sulfate-Glutarate Coordination Polymers with Photoluminescence

A series of five isostructural 3D lanthanide-based coordination polymers [LnIII2(H2O)6(glu)(SO4)2]n [Ln = Pr(1), Nd(2), Sm(3), Eu(4), and Gd(5)] was effortlessly obtained within a few minutes via the microwave-heating method. The employment of auxiliary bases, that is, sodium hydroxide, 4,4'-bipyridine, and 1,4-diazabicyclo[2.2.2]octane, led to the formation of the title complex, whereas base-free synthesis yielded a three-dimensional inorganic coordination polymer, [Ln2(H2O)4(SO4)3]n·nH2O, Ln = Nd (2a). The robustness of the synthetic method was illustrated as both microwave-heating and conventional hydrothermal techniques also enabled the formation of a high-crystalline phase-pure complex 1-5. In the structure of 1-5, glutarato (glu2-) and sulfato ligands link dinuclear Ln(III) building units into three-dimensional frames. The glu2- ligands act as tethering linkers, expanding the structure into a neutral 3D coordination network. Hydrogen bonds were found to be the predominant intermolecular interactions in the crystal structures. Photoluminescence of the complex 1-5 was studied.

Machine-Learning-Enabled Ligand Screening for Cs/Sr Crystallizing Separation

The reprocessing of spent nuclear fuel is critical for the sustainability of the nuclear energy industry. However, several key separation processes present challenges in this regard, calling for continuous research into next-generation separation materials. Herein, we propose a high-throughput screening framework to improve efficiency in identifying potential ligands that selectively coordinate metal cations of interest in liquid wastes that considers multiple key chemical characteristics, including aqueous solubility, pKa, and coordination bond length. Machine-learning models were designed for the fast and accurate prediction of these characteristics by using graph convolution and transfer-learning techniques. Suitable ligands for Cs/Sr crystallizing separation were identified through the "computational funnel", and several top-ranking, nontoxic, low-cost ligands were selected for experimental verification.

Molecular docking with SARS-CoV-2 and potential drug property of a bioactive novel Zn(II) polymer: A combined experimental and theoretical study

A new Zn(II) coordination polymer based on o-phthalato (Phth) and 2-aminopyridine (2-Ampy) viz. {[Zn(2-Ampy)₂(Phth)]∙(H₂O)]}_n (1) has been synthesized at room temperature and characterized by elemental analyses, electronic spectroscopy, FT-IR spectroscopy, thermal analysis (TGA/DSC), powder X-ray diffraction (PXRD) and single crystal X-ray diffraction. The basic trimeric units of 1 form a polymeric chain by N-H⋯O and π⋯π interactions. These polymeric chains interconnect through various non-covalent interactions in two perpendicular directions to ultimately give rise to a 3D architecture of 1. The interesting non-covalent interactions in 1, contributing to its stability in the solid state are studied by Hirshfeld surface analysis and other different theoretical tools. Molecular docking study of 1 is performed against six different proteins of SARS-CoV-2. The drug potential of the synthesized compound is evaluated by ADMET calculations.

Crystallographic-Morphological Connections in Star Shaped Metal-Organic Frameworks

The symmetry of a crystal's morphology usually reflects the symmetry of the crystallographic packing. For single crystals, the space and point groups allow only a limited number of mathematical descriptions of the morphology (forms), all of which are convex polyhedrons. In contrast, concave polyhedrons are a hallmark of twinning and polycrystallinity and are typically inconsistent with single crystallinity. Here we report a new type of structure: a concave polyhedron shape single crystal having a multidomain appearance and a rare space group (P622). Despite these unusual structural features, the hexagonal symmetry is revealed at the morphological levels.

Simulated adsorption of iodine by an amino-metal-organic framework modified with covalent bonds

Radioactive iodine in nuclear waste is increasingly harmful to the human body and the environment because of its strong radioactivity, high fluidity, easy solubility in water, and long half-life. It is very important to find clean and economical materials to recover and fix radioactive iodine. In this paper, the amino-metal-organic framework was covalently modified to obtain composite materials to improve the recycling of iodine in the environment. These adsorbents are used to adsorb iodine in water, showing outstanding adsorption performance. The adsorption data are in good agreement with the Langmuir isothermal adsorption model and pseudo-second-order kinetic model, indicating that the adsorption process is mainly monolayer adsorption and chemical adsorption. The two materials showed selective adsorption capacity for iodine in the solution containing multiple competing ions. The adsorption capacity of the covalently modified composite increased from 949.52 to 2157.44 mg/g. Compared with the amino-metal-organic framework, the modified composite contains more electron-rich groups as active sites, and forms charge transfer compounds with iodine to realize chemical adsorption. Through the simulated adsorption of ultra-high-pressure micro-jet, the material has certain working ability under high pressure, which provides a theoretical basis for the future recovery and utilization of iodine under high pressure.

Metal-Organic Frameworks and Their Composites for Environmental Applications

From the point of view of the ecological environment, contaminants such as heavy metal ions or toxic gases have caused harmful impacts on the environment and human health, and overcoming these adverse effects remains a serious and important task. Very recent, highly crystalline porous metal-organic frameworks (MOFs), with tailorable chemistry and excellent chemical stability, have shown promising properties in the field of removing various hazardous pollutants. This review concentrates on the recent progress of MOFs and MOF-based materials and their exploit in environmental applications, mainly including water treatment and gas storage and separation. Finally, challenges and trends of MOFs and MOF-based materials for future developments are discussed and explored.

Precise regulation of defect concentration in MOF and its influence on photocatalytic overall water splitting

In this work, the defective Cu-BDC with different defect concentration and Cu¹⁺/Cu²⁺ coordinatively unsaturated sites (CUS) content were designed and synthesized by introducing defective linkers with different pK_a values. The low-concentration defects in Metal-organic frameworks (MOFs) structure act as the active sites to enhance their photocatalytic activity. In contrast, the high concentration defects serve as the recombination centers of photogenerated electrons and holes to decrease the transfer efficiency of charge carriers. Cu-BDC-FBA shows an excellent bifunctional photocatalytic performance for overall water splitting due to the suitable defect concentration, which gives an oxygen production rate of 3114 μmol g^-1 h^-1 and hydrogen production rate of 16 829 μmol g^-1 h^-1, respectively. It is expected that this study can deepen the understanding of the relationship between defects and photocatalytic activity, and provide a new idea for the design and synthesis of defective MOFs photocatalysts with excellent performance.

Crystal Engineering and Photomagnetic Studies of CN-Bridged Coordination Polymers Based on Octacyanidometallates(IV) and [Ni(cyclam)]2

A series of new CN-bridged coordination networks of different dimensionality and topology was obtained through the modification of reaction conditions between [Ni(cyclam)]²⁺ (cyclam = 1,4,8,11-tetraazacyclotetradecane) and [W(CN)₈]^4–. The factors determining the reaction pathway are temperature and addition of the LiCl electrolyte. The products include three negatively charged frameworks incorporating Li⁺ guests: the 1D Li₂[Ni(cyclam)][W(CN)₈]·6H₂O (1) straight chain, the 1D Li₂[Ni(cyclam)][W(CN)₈]·2H₂O (2) zigzag chain, and the 2D Li₂[Ni(cyclam)]₃[W(CN)₈]₂·24H₂O (3) honeycomb-like network, as well as the 3D two-fold interpenetrating [Ni(cyclam)]₅[Ni(CN)₄][W(CN)₈]₂·11H₂O (4) network and the 1D [Ni(cyclam)][Ni(CN)₄]·2H₂O (5) chain, which result from partial decomposition of the starting complexes. Together with the previously characterized 3D [Ni(cyclam)]₂[W(CN)₈]·16H₂O (6) network, they constitute the largest family of CN-bridged coordination polymers obtained from the same pair of building blocks. All compounds exhibit paramagnetic behavior because of the separation of paramagnetic nickel(II) centers through the diamagnetic polycyanidometallates. However, the presence of the photomagnetically active octacyanidotungstate(IV) ions allowed observation of the magnetic superexchange after the violet light excitation (405 nm) for compound 3, which constitutes the first example of the photomagnetic effect in a Ni^II–[W^IV(CN)₈] system. The photomagnetic investigations for fully hydrated and dehydrated sample of 3, as well as for the isostructural octacyanidomolybdate(IV)-based network are discussed.

Six coordination networks of different dimensionality and topology can be obtained from the same pair of building blocks: [Ni(cyclam)]²⁺ and [W(CN)₈]⁴⁻ depending on reaction conditions. The negatively charged 2D Li₂[Ni(cyclam)]₃[W(CN)₈]₂·nH₂O microporous network is the first example of the photomagnetic effect in a Ni^II−[W^IV(CN)₈] system.

Recent advances in nanoarchitectures of monocrystalline coordination polymers through confined assembly

Various kinds of monocrystalline coordination polymers are available thanks to the rapid development of related synthetic strategies. The intrinsic properties of coordination polymers have been carefully investigated on the basis of the available monocrystalline samples. Regarding the great potential of coordination polymers in various fields, it becomes important to tailor the properties of coordination polymers to meet practical requirements, which sometimes cannot be achieved through molecular/crystal engineering. Nanoarchitectonics offer unique opportunities to manipulate the properties of materials through integration of the monocrystalline building blocks with other components. Recently, nanoarchitectonics has started to play a significant role in the field of coordination polymers. In this short review, we summarize recent advances in nanoarchitectures based on monocrystalline coordination polymers that are formed through confined assembly. We first discuss the crystallization of coordination polymer single crystals inside confined liquid networks or on substrates through assembly of nodes and ligands. Then, we discuss assembly of preformed coordination polymer single crystals inside confined liquid networks or on substrates. In each part, we discuss the properties of the coordination polymer single crystals as well as their performance in energy, environmental, and biomedical applications.

Palladium decoration directed synthesis of ZIF-8 nanocubes with efficient catalytic activity for nitrobenzene hydrogenation

A palladium precursor (H₂PdCl₄) has been utilized as a novel structure-directing agent for controlling the morphology of ZIF-8. Using reverse micelles as nanoreactors, the Pd/ZIF-8 nanocomposite with a uniform size distribution is obtained. It is revealed that Pd(II) can selectively coordinate with the (100) plane of ZIF-8. As a result, the morphology of ZIF-8 is transformed from rhombic dodecahedral to cubic. After hydrogen treatment, the as-obtained Pd NPs/ZIF-8 nanocubes show efficient catalytic activity for nitrobenzene hydrogenation, which is higher than that of the commercially available Pd/C catalyst.

Enhanced Methylene Blue Adsorption by Cu-BTC Metal-Organic Frameworks with Engineered Particle Size Using Surfactant Modulators

Metal–organic frameworks (MOFs) featuring porous structures and large specific surface areas have shown great potential in removing organic pollutants from wastewater via adsorption processes. Although the particle size of MOFs determines the adsorption performance (something known as the size-dependent effect), engineering it into desirable dimensions for enhancing the adsorption performance is a great challenge. Here, we develop a practical and facile approach to regulate the particle size of copper benzene-1,3,5-tricarboxylate (Cu-BTC) adsorbents with high tunability by screening the functional modulator of various surfactants adding in hydrothermal synthesis procedure. The effect of surfactant type and concentration on the particle size of Cu-BTC was systematically investigated. The results show that the nonionic surfactant polyvinylpyrrolidone (PVP) demonstrated the greatest ability to control the particle size of Cu-BTC among other counterparts (e.g., N, N, N-trimethyl-1-dodecanaminium bromide (DTAB), polyethylene glycol (PEG1000), sodium dodecyl sulfate (SDS), sodium dodecyl benzene sulfonate (SDBS) and hexadecyl trimethyl ammonium bromide (CTAB)). By increasing the PVP concentration to 0.14 mmol L−1, the average particle size of Cu-BTC could be correspondingly reduced by more than ten times, reaching to a comparative smaller value of 2.4 μm as compared with the reported counterparts. In addition, the PVP allowed a large increase of the surface area of Cu-BTC according to porosity analysis, resulting in a great enhancement of methylene blue (MB) adsorption. The PVP-modulated Cu-BTC showed fast adsorption kinetics for MB removal accompanied with a maximum adsorption capacity of 169.2 mg g−1, which was considerably competitive with most of the analogs reported. Therefore, our study may inspire concepts for engineering the particle size of Cu-BTCs with improved properties for more practical applications.

Recent Development of MOF-Based Photothermal Agent for Tumor Ablation

Metal-organic frameworks (MOFs) are 3D-architecture compounds of metal ions and organic molecules with sufficient and permanent porosity, showing great potential as a versatile platform to load various functional moieties to endow the hybrid materials with specific applications. Currently, a variety of photothermal nanometals have been embedded into organic ligands for integrating the unique photothermal effects with the merits of MOFs to improve their performances for cancer therapy. In this review, we have summarized a series of novel MOF-based photothermal materials for this unique therapeutic modality against tumors from three main aspects according to their chemical compositions and structures, i) metal-doped MOF, ii) organic-doped MOF, and iii) polymer-coated MOF. In addition, we have summarized the latest developments and characteristics of MOF-based photothermal agents, such as good biocompatibility, low toxicity, and responsive photothermal conversion without destroying the structure of hybrid photothermal agent. At last, we addressed the future perspectives of MOF-based photothermal agent in the field of phototherapy.

Linker Deprotonation and Structural Evolution on the Pathway to MOF-74

The synthesis of MOF-74 (MOF = metal-organic framework) proceeds first through the generation of chemically and topologically distinct materials, referred to as phases, displaying exclusively carboxylate coordination, followed by further deprotonation to enable oxo coordination and MOF-74 formation. The synthesis of Mg-MOF-74 at high concentrations of linker and metal enables the stabilization and characterization of the previously unobserved, exclusively carboxylate coordinating phases. Ex situ and in situ approaches are leveraged to provide the time-resolved observation of Mg-MOF-74 synthesis and the formation of phases that precede Mg-MOF-74 formation as well as metastable phase dissolution. These data support dissolution and redeposition as the mechanism of MOF-74 formation and provide insight into the formation mechanism of MOFs with multiple linker coordination types.

Autocatalysis and Oriented Attachment Direct the Synthesis of a Metal-Organic Framework

Synthesis of porous, covalent crystals such as zeolites and metal-organic frameworks (MOFs) cannot be described adequately using existing crystallization theories. Even with the development of state-of-the-art experimental and computational tools, the identification of primary mechanisms of nucleation and growth of MOFs remains elusive. Here, using time-resolved in-situ X-ray scattering coupled with a six-parameter microkinetic model consisting of ∼1 billion reactions and up to ∼100 000 metal nodes, we identify autocatalysis and oriented attachment as previously unrecognized mechanisms of nucleation and growth of the MOF UiO-66. The secondary building unit (SBU) formation follows an autocatalytic initiation reaction driven by a self-templating mechanism. The induction time of MOF nucleation is determined by the relative rate of SBU attachment (chain extension) and the initiation reaction, whereas the MOF growth is primarily driven by the oriented attachment of reactive MOF crystals. The average size and polydispersity of MOFs are controlled by surface stabilization. Finally, the microkinetic model developed here is generalizable to different MOFs and other multicomponent systems.

Spray drying-assisted construction of hierarchically porous ZIF-8 for controlled release of doxorubicin

The intrinsic properties and structure of carrier materials, as well as the drug-loading method, are crucial to the fabrication of high-performance controlled drug release systems. Metal-organic frameworks (MOFs) have attracted great attention in drug delivery due to their rich variety and very precisely designable structures, but their inherent small pores limit their application towards large-size drug molecules. Herein, we report a facile and efficient approach for the construction of hierarchically porous ZIF-8 (HP-ZIF-8) by spray drying. The homogeneously distributed mesopores, which result from the interspaces in the closely arranged nanosized ZIF-8 (N-ZIF-8), can be tuned by adjusting the primary particle size. More importantly, a drug (doxorubicin (DOX), for example) can be simultaneously encapsulated during the fabrication process of HP-ZIF-8, achieving a high loading rate of 79% and an encapsulation efficiency of 79%. Furthermore, we demonstrate that the obtained DOX@HP-ZIF-8 is a pH-responsive system and the release can also be controlled by the mesopore size. Although HP-ZIF-8 shows obvious advantages in drug loading and release performance compared with N-ZIF-8 loaded with DOX by the same solvent adsorption approach, DOX@HP-ZIF-8 displays significantly increased loading capacity (more than 3 times) and the slowest release rate due to its drug-loading method. Their therapeutic efficacy on HeLa cells has also been proved. These findings have important implications for the construction of HP-MOFs as drug carriers and will also present a new platform for controlled drug release and biomedical applications.

Metal-organic frameworks in pursuit of size: the development of macroscopic single crystals REMINDER: Personal invitation to contribute to Dalton Transactions - CoordNetworks

Metal-organic frameworks are versatile structures with many different applications, from the industry to the clinic. Despite multiple synthesis approaches are possible to coordinate metals and organic ligands, some common strategies...

Low-Medium Temperature-Selective Catalytic Reduction of NO with NH3 over a Mn/Co-MOF-74 Catalyst

To realize the selective catalytic reduction of NO at low-medium temperatures and avoid secondary pollution, a highly active catalyst Mn/Co-MOF-74 was synthesized. X-ray diffraction, X-ray photoelectron spectroscopy, thermogravimetric analysis, Brunauer-Emmett-Teller method, and scanning electron microscopy were employed to analyze the physicochemical properties of catalysts with different Mn/Co molar ratios and conjecture about the difference in the catalytic activity. Meanwhile, the effects of the molar ratio of Mn/Co, catalyst dosage, catalyst synthesis conditions, GHSV, and temperature on the NO conversion efficiencies were investigated and found that an optimal NO conversion efficiency of 93.5% was obtained at 200-225 °C. In the end, the stability of Mn/Co-MOF-74 was investigated and found that the catalyst has better sulfur and water resistance, and the NO conversion mechanism was speculated on the basis of characterizations and literature data.

Photosensitizer-based metal-organic frameworks for highly effective photodynamic therapy

Photodynamic therapy (PDT) uses a photosensitizer, molecular oxygen, and visible light as an alternative clinical protocol against located malignant tumors and other diseases. More recently, PDT has been combined to immunotherapy as a promising option to treat metastatic cancer. However, previous generations of photosensitizers (PSs) revealed clinical difficulties such as long-term skin photosensitivity (first generation), the need for drug delivery vehicles (second generation), and intracellular self-aggregation (third generation), which have generated a somewhat confusing scenario in PDT approaches and evolution. Recently, metal-organic frameworks (MOFs) with exceptionally high PS loading as a building unit of MOF framework have emerged as fourth-generation PS and presented outstanding outcomes under pre-clinical studies. For PS-based MOFs, the inorganic building unit (metal ions/clusters) plays an important role as a coadjuvant in PDT to alleviate hypoxia, to decrease antioxidant species, to yield ROS, or to act as a contrast agent for imaging-guided therapy. In this review, we intend to carry out a broad update on the recent history and the characteristics of PS-based MOFs from basic chemistry to the structure relationship with biological application in PDT. The details and variables that result in different photophysics, size, and morphology, are discussed. Also, we present an overview of the achievements on the pre-clinical assays in combination with other strategies, including alleviating hypoxia in solid tumors, chemotherapy, and the most recent immunotherapy for cancer.

Creating Organic Functional Materials beyond Chemical Bond Synthesis by Organic Cocrystal Engineering

Organic cocrystal engineering refers to two or more organic molecules stoichiometrically combined and held together by noncovalent intermolecular interactions, which differs from standard chemical synthesis involving covalent bond breakage and formation. Organic cocrystals have unique properties and offer a new strategy for creating enhanced organics. First, however, some key questions need to be addressed: How do diverse monomers affect the intermolecular interaction kinetics during cocrystallization? How do the intermolecular forces in cocrystals affect cocrystal functions? In this Perspective, the definition and advantages of organic cocrystal engineering, specifically in the construction of a reliable intermolecular interaction-stacking structure-performance relationship, are outlined. Additionally, recent developments in the field and the questions above are discussed. Finally, a brief conclusion and some hints on likely future developments are provided.

In Situ Investigation of Multicomponent MOF Crystallization during Rapid Continuous Flow Synthesis

Access to the potential applications of metal-organic frameworks (MOFs) depends on rapid fabrication. While there have been advances in the large-scale production of single-component MOFs, rapid synthesis of multicomponent MOFs presents greater challenges. Multicomponent systems subjected to rapid synthesis conditions have the opportunity to form separate kinetic phases that are each built up using just one linker. We sought to investigate whether continuous flow chemistry could be adapted to the rapid formation of multicomponent MOFs, exploring the UMCM-1 and MUF-77 series. Surprisingly, phase pure, highly crystalline multicomponent materials emerge under these conditions. To explore this, in situ WAXS was undertaken to gain an understanding of the formation mechanisms at play during flow synthesis. Key differences were found between the ternary UMCM-1 and the quaternary MUF-7, and key details about how the MOFs form were then uncovered. Counterintuitively, despite consisting of just two ligands UMCM-1 proceeds via MOF-5, whereas MUF-7 consists of three ligands but is generated directly from the reaction mixture. By taking advantage of the scalable high-quality materials produced, C6 separations were achieved in breakthrough settings.

A biochar supported magnetic metal organic framework for the removal of trivalent antimony

Metal organic framework (MOF) nanoparticles are recognized for their effective removal of metal ions from aqueous systems. However, the application of nanoparticles in a powder form as synthesized is not practical and recovery is not easy. We prepared a recyclable magnetic MOF nanoparticle phase and used a widely available waste biomass to generate biochar to support magnetic nanoparticles applied in the treatment of aqueous antimony pollution. A mushroom waste biochar was used to support a magnetic UIO-66-2COOH (denoted as BSMU). Adsorption of trivalent antimony (Sb (III)) onto the BSMU was evaluated. The results showed that optimum conditions for preparation of the BSMU were the mass ratio of MMOF to biochar 4:1, the temperature 70 °C, the time 4 h, and the initiator 4 mM. Under such conditions, sorption capacity reached 56.49 mg/g for treatment of Sb (III) solution at 100 mg/L and pH 9.1. Alkaline conditions (such as pH 9.1) are more favorable for adsorption than acidic conditions, and coexisting ions including NO₃^-, Cl^-, SO₄^2-, and PO₄^3- had no significant negative effect in adsorption, and with the use of low dose, higher adsorption density achieved. The adsorption followed a pseudo second order kinetics model and Freundlich isotherm model. It resulted in a higher enthalpy changes (ΔH^θ) and activation energy (E_a) of 97.56 and 8.772 kJ/mol, respectively, and enhanced the rate pf random contact between antimony and the BSMU, as indicated by a higher entropy change (ΔS^θ) up to 360 J/mol·K. As a result, it readily absorbs antimony. These adsorption properties identified in this study would provide a valuable insights into the application of nanoparticles loaded biochar from abundant biomass in environmental remediation.

Improving the knock-in efficiency of the MOF-encapsulated CRISPR/Cas9 system through controllable embedding structures

Appropriate tuning of robust artificial coatings can not only enhance intracellular delivery but also preserve the biological functions of genetic molecules in gene based therapies. Here, we report a strategy to synthesize controllable nanostructures in situ by encapsulating CRISPR/Cas9 plasmids into metal-organic frameworks (MOFs) via biomimetic mineralization. The structure-functionality relationship studies indicate that MOF-coated nanostructures dramatically impact the biological features of the contained plasmids through different embedding structures. The plasmids are homogeneously distributed within the heterogeneous nanoarchitecture and protected from enzymatic degradation. In addition, the plasmid-MOF structure exhibits excellent loading capability, pH-responsive release, and affinity for plasmid binding. Through in vitro assays it was found that the superior MOF vector can greatly enhance cellular endocytosis and endo/lysosomal escape of sheltered plasmids, resulting in successful knock-in of GFP-tagged paxillin genomic sequences in cancer cell lines with high transfection potency compared to our previous studies. Thus, the development of new cost-effective approaches for MOF-based intracellular delivery systems offers an attractive option for overcoming the physiological barriers to CRISPR/Cas9 delivery, which shows great potential for investigating paxillin-associated focal adhesions and signal regulation.

Multifunctional Two-Dimensional Metal-Organic Frameworks for Radionuclide Sequestration and Detection

Two lanthanide-containing porous coordination polymers, [Ln₂(bpdc)₆(phen)₂]·nH₂O (1) and [Ln₂(bpdc)₆(terpy)₂]·3H₂O (2) (Ln = Pr, Nd, or Sm-Dy; bpdc: 2,2'-bipyridine-5,5'-dicarboxylic acid; phen: 1,10-phenanthroline; and terpy: 2,2':6',2″-terpyridine), have been hydrothermally synthesized and structurally characterized by powder and single-crystal X-ray diffraction. Crystallographic analyses reveal that compounds 1 and 2 feature Ln³⁺-containing dimeric nodes that form a porous two-dimensional (2D) and nonporous three-dimensional (3D) framework, respectively. Each material is stable in aqueous media between pH 3 and 10 and exhibits modest thermal stability up to ∼400 °C. Notably, a portion of the phen and bpdc ligands in 1 can be removed thermally, without compromising the crystal structure, causing the surface area and pore volume to increase. The optical properties of 1 and 2 with Gd³⁺, Sm³⁺, Tb³⁺, and Eu³⁺ are explored in the solid state using absorbance, fluorescence, and lifetime spectroscopies. The analyses reveal a complex blend of metal and ligand emission in the materials containing Sm³⁺ and Tb³⁺, while those featuring Eu³⁺ are dominated by intense metal-based emission. Compound 1 with Eu³⁺ shows promise for the capture and detection of the uranyl cation (UO₂)²⁺ from aqueous media. In short, uranyl capture is observed at pH 4, and the adsorption thereof is detectable via vibrational and fluorescence spectroscopies and colorimetrically as the off-white color of 1 turns yellow with uptake. Finally, both 1 and 2 with Eu³⁺ produce bright red emission upon irradiation with Cu Kα X-ray radiation (8.04 keV) and are candidate materials for applications in solid-state scintillation.

Insights on Luminescent Micro- and Nanospheres of Infinite Coordination Polymers

Coordination polymers have been extensively studied in recent years. Some of these materials can exhibit several properties such as permanent porosity, high surface area, thermostability and light emission, as well as open sites for chemical functionalization. Concerning the fact that this kind of compounds are usually solids, the size and morphology of the particles are important parameters when an application is desired. Inside this context, there is a subclass of coordination polymers, named infinite coordination polymers (ICPs), which auto-organize as micro- or nanoparticles with low crystallinity. Specifically, the particles exhibiting spherical shapes and reduced sizes can be better dispersed, enter cells much easier than bulk crystals and be converted to inorganic materials by topotactic transformation. Luminescent ICPs, in particular, can find applications in several areas, such as sensing probes, light-emitting devices and bioimaging. In this review, we present the state-of-the-art of ICP-based spherical particles, including the growth mechanisms, some applications for luminescent ICPs and the challenges to overcome in future commercial usage of these materials.

Assembly of Colloidal Clusters Driven by the Polyhedral Shape of Metal-Organic Framework Particles

Control of the assembly of colloidal particles into discrete or higher-dimensional architectures is important for the design of myriad materials, including plasmonic sensing systems and photonic crystals. Here, we report a new approach that uses the polyhedral shape of metal–organic-framework (MOF) particles to direct the assembly of colloidal clusters. This approach is based on controlling the attachment of a single spherical polystyrene particle on each face of a polyhedral particle via colloidal fusion synthesis, so that the polyhedral shape defines the final coordination number, which is equal to the number of faces, and geometry of the assembled colloidal cluster. As a proof of concept, we assembled six-coordinated (6-c) octahedral and 8-c cubic clusters using cubic ZIF-8 and octahedral UiO-66 core particles. Moreover, we extended this approach to synthesize a highly coordinated 12-c cuboctahedral cluster from a rhombic dodecahedral ZIF-8 particle. We anticipate that the synthesized colloidal clusters could be further evolved into spherical core–shell MOF@polystyrene particles under conditions that promote a higher fusion degree, thus expanding the methods available for the synthesis of MOF–polymer composites.

Mechanistic Investigations into and Control of Anisotropic Metal-Organic Framework Growth

The porphyrinic metal-organic framework, PCN-222, exhibits anisotropic growth behavior to form nanorods and microrods with aspect ratios 3 < x < 94. Control of microrod aspect ratios has been demonstrated through the identification of several factors that dictate crystal growth, particularly the concentrations of a ligand, a modulator, and an exogenous base. An increase in the local concentration of a deprotonated ligand, which is proportional to the nucleation rate, is associated with smaller crystals, while increased modulator concentration leads to longer microrods. Addition of a deprotonating agent not only contributes to higher aspect ratios but also results in an improvement to particle dispersity. Here, we report acid-base co-modulation methods with difluoroacetic acid and triethylamine to effectively tune PCN-222 aspect ratios. A series of mechanisms is identified for the growth of PCN-222: (1) ligand deprotonation, (2) nucleation, (3) oriented attachment, (4) Ostwald ripening, and (5) dissolution-recrystallization. Time trials of co-modulated samples revealed three separate ripening growth events, with each resulting in larger and more monodisperse crystals. With an understanding of these crystal growth factors and mechanisms, the highest aspect ratio, non-templated metal-organic frameworks were synthesized (94 ± 9).

Tuning of magnetic properties of the 2D CN-bridged NiII-NbIV framework by incorporation of guest cations of alkali and alkaline earth metals

The reaction between [Ni(cyclam)]2+ (cyclam = 1,4,8,11-tetraazacyclotetradecane) and [Nb(CN)8]4- in concentrated water solutions of different s-block metal salts leads to the formation of 2-dimensional honeycomb-like coordination networks of the formula Mx[Ni(cyclam)]3[Nb(CN)8]2·nH2O (x = 2: M = Li+, Na+; x = 1: M = Mg2+, Ca2+, Sr2+, Ba2+). The CN-bridged Ni-Nb coordination layers are intersected by channels filled with crystallisation water molecules and guest mono- or di-valent metal cations, which compensate the negative charge of the framework. The structural details and crystal symmetry vary between the networks, depending on the arrangement of the water molecules and the intermolecular interactions enforced by the guest cations. All compounds show long range magnetic order arising from superexchange interactions between paramagnetic NiII (s = 1) and NbIV (s = 1/2) centres through CN-bridges within the layers and weaker inter-layer interactions mediated by H-bonds. The ordering temperature as well as the coercive field of the magnetic hysteresis can be tuned by the type of guest cation, with the highest values achieved for Mg2+ and the lowest for Na+.

ROS-generating rare-earth coordination networks for photodynamic inactivation of Candida albicans

Water-ethanol suspensions of 2D coordination network (CN) based on rare earth elements and mixed ligands were evaluated as reactive oxygen species (ROS) generators under UV light irradiation, in contact with a biomimetic substrate (tryptophan) or an O2(1Δg) quencher (1,3-diphenylisobenzofuran; 1,3-DPBF). A combination of bottom-up and top-down strategies was implemented in order to obtain nano-sized CN particles and the subsequent colloidal suspensions were also tested towards photodynamic inactivation of Candida albicans (C. albicans). SEM, TEM, FTIR, and XRD techniques were applied to characterize the solids and ICP-AES was employed to determine the metal content of the colloidal suspensions. Promising results were found indicating that the presence of Tb3+ allows an intersystem crossing suitable for singlet oxygen generation, resulting in the antifungal activity of C. albicans culture upon UV-irradiation.