New vistas in the chemistry of platinum group metals with tellurium ligands

Cationic ligands - from monodentate to pincer systems

For a long time, the small group of cationic ligands stood out as obscure systems within the general landscape of coordinative chemistry. However, this situation has started to change rapidly during the last decade, with more and more examples of metal-coordinated cationic species being reported. The growing interest in these systems is not only of purely academic nature, but also driven by accumulating evidence of their high catalytic utility. Overcoming the inherently poor coordinating ability of cationic species often required additional structural stabilization. In numerous cases this was realized by functionalizing them with a pair of chelating side-arms, effectively constructing a pincer-type scaffold. This comprehensive review aims to encompass all cationic ligands possessing such pincer architecture reported to date. Herein every cationic species that has ever been embedded in a pincer framework is described in terms of its electronic structure, followed by an in-depth discussion of its donor/acceptor properties, based on computational studies (DFT) and available experimental data (IR, NMR or CV). We then elaborate on how the positive charge of these ligands affects the spectroscopic and redox properties, as well as the reactivity, of their complexes, compared to those of the structurally related neutral ligands. Among other systems discussed, this review also surveys our own contribution to this field, namely, the introduction of sulfonium-based pincer ligands and their complexes, recently reported by our group.

Catalytic system having an organotellurium ligand on graphene oxide: immobilization of Pd(0) nanoparticles and application in heterogeneous catalysis of cross-coupling reactions

First heterogeneous catalytic system, having a covalently linked hybrid bidentate organotellurium ligand [i.e., PhTe-CH2-CH2-NH2] on the surface of graphene oxide, has been synthesized with immobilized and stabilized Pd(0) nanoparticles. To the best of our knowledge, it is the first such catalytic system in which a heterogenized organotellurium ligand has been used. It has been well-characterized using different physicochemical characterization techniques viz. P-XRD, XPS, HR-TEM, EELS, FE-SEM, EDX, TGA, BET surface area analysis, FT-IR spectroscopy, and Raman spectroscopy. The Pd content of the final system has been quantified using ICP-OES. Its applications have been explored in Suzuki-Miyaura C-C cross coupling and C-O cross coupling reactions. Hot filtration experiments corroborate the heterogeneous nature of the catalysis. It is recyclable for up to five reaction cycles in Suzuki-Miyaura and C-O cross coupling with marginal loss in performance. It also catalyzes the reactions of chloroarenes such as chlorobenzene, 4-chloroaniline, 1-chloro-4-nitrobenzene, 4-chloroacetophenone, 4-chlorobenzophenone for Suzuki coupling, and 1-chloro-4-nitrobenzene, 4-chlorobenzonitrile, chlorobenzene, and 4-chlorotoluene for C-O coupling. P-XRD, FE-SEM, and EDX study reveals that the catalytic system retains its structural originality and functionality after recycling.

Formation, Characterization, and Bonding of cis- and trans-[PtCl2{Te(CH2)6}2], cis-trans-[Pt3Cl6{Te(CH2)6}4], and cis-trans-[Pt4Cl8{Te(CH2)6}4]: Experimental and DFT Study

[PtCl2{Te(CH2)6}2] (1) was synthesized from the cyclic telluroether Te(CH2)6 and cis-[PtCl2(NCPh)2] in dichloromethane at room temperature under the exclusion of light. The crystal structure determination showed that in the solid state, 1 crystallizes as yellow plate-like crystals of the cis-isomer 1cis and the orange-red interwoven needles of 1trans. The crystals could be separated under the microscope. NMR experiments showed that upon dissolution of the crystals of 1cis in CDCl3, it isomerizes and forms a dynamic equilibrium with the trans-isomer 1trans that becomes the predominant species. Small amounts of cis-trans-[Pt3Cl6{Te(CH2)6}4] (2) and cis-trans-[Pt4Cl8{Te(CH2)6}4] (3) were also formed and structurally characterized. Both compounds show rare bridging telluroether ligands and two different platinum coordination environments, one exhibiting a cis-Cl/cis-Te(CH2)6 arrangement and the other a trans-Cl/trans-Te(CH2)6 arrangement. Complex 2 has an open structure with two terminal and two bridging telluroether ligands, whereas complex 3 has a cyclic structure with four Te(CH2)6 bridging ligands. The bonding and formation of the complexes have been discussed through the use of DFT calculations combined with QTAIM analysis. The recrystallization of the mixture of the 1:1 reaction from d6-DMSO afforded [PtCl2{S(O)(CD3)2}{Te(CH2)6}] (4) that could also be characterized both structurally and spectroscopically.

Dependence of Transition-Metal Telluride Phases on Metal Precursor Reactivity and Mechanistic Implications

Modern bottom-up synthesis to nanocrystalline solid-state materials often lacks the reasoned product control that molecular chemistry boasts from having over a century of research and development. In this study, six transition metals including iron, cobalt, nickel, ruthenium, palladium, and platinum were reacted with the mild reagent didodecyl ditelluride in their acetylacetonate, chloride, bromide, iodide, and triflate salts. This systematic analysis demonstrates how rationally matching the reactivity of metal salts to the telluride precursor is necessary for the successful production of metal tellurides. The trends in reactivity suggest that radical stability is the better predictor of metal salt reactivity than hard-soft acid-base theory. Of the six transition-metal tellurides, the first colloidal syntheses of iron and ruthenium tellurides (FeTe₂ and RuTe₂) are reported.

Experimental and computational investigation on the formation pathway of [RuCl2(CO)2(ERR')2] (E = S, Se, Te; R, R' = Me, Ph) from [RuCl2(CO)3]2 and ERR'

The pathways to the formation of the series of [RuCl₂(CO)₂(ERR')₂] (E = S, Se, Te; R, R' = Me, Ph) complexes from [RuCl₂(CO)₃]₂ and ERR' have been explored experimentally in THF and CH₂Cl₂, and computationally by PBE0-D3/def2-TZVP calculations. The end-products and some reaction intermediates have been isolated and identified by NMR spectroscopy, and their crystal structures have been determined by X-ray diffraction. The relative stabilities of the [RuCl₂(CO)₂(ERR')₂] isomers follow the order cct > ccc > tcc > ttt ≈ ctc (the terms c/t refer to cis/trans arrangement of the ligands in the order of Cl, CO, and ERR'). The yields were rather similar in both solvents, but the reactions were significantly faster in THF than in CH₂Cl₂. The highest yields were observed for the telluroether complexes, and the yields decreased with lighter chalcogenoethers. PBE0-D3/def2-TZVP calculations indicated that the reaction path is independent of the nature of the solvent. The substitution of one CO ligand of the intermediate [RuCl₂(CO)₃(ERR')] by the second ERR' shows the highest activation barrier and is the rate-determining step in all reactions. The observed faster reaction rate in THF than in CH₂Cl₂ upon reflux can therefore be explained by the higher boiling point of THF. At room temperature the reactions in both solvents proceed equally slowly. When the reaction is carried out in THF, the formation of [RuCl₂(CO)₃(THF)] is also observed, and the reaction may proceed with the substitution of THF by ERR'. The formation of the THF complex, however, is not necessary for the dissociation of the [RuCl₂(CO)₃]₂. Thermal energy at room temperature is sufficient to cleave one of the bridging Ru-Cl bonds. The intermediate thus formed undergoes a facile reaction with ERR'. This mechanism is viable also in non-coordinating CH₂Cl₂.

Solvents and Ligands Matter: Structurally Variable Palladium and Nickel Clusters Assembled by Tridentate Selenium- and Tellurium-Containing Schiff Bases

Structurally variable organochalcogen clusters containing palladium(II) and nickel(II) ions were assembled starting from the salicylidene-substituted dichalcogenides (Y-C₆H₄-N═CH-C₆H₄-OH)₂ ({HL^Y}₂, where Y = Se or Te), and palladium or nickel acetate. The tetrameric palladium clusters contain reduced chalcogenolato ligands {Y-C₆H₄-N═CH-C₆H₄-O)}^2- ({L'^Y}^2-, where Y = Se or Te), while the initially formed trimeric nickel clusters contain the intact, coordinated dichalcogenides. The palladium clusters have a general formula of [Pd₄(L'^Y)₄] and represent the first examples of palladium complexes where both a gyrobifastigial and a pseudocubane arrangement of the central Pd₄Y₄ unit could be established with the same ligand, only depending on the solvents used for crystallization. Reduced density gradient (RDG) considerations based on density functional theory calculations suggest that the commonly referred to stabilizing chalcogen-palladium or palladium-palladium interactions for the two geometric arrangements are weak van der Waals contacts resulting from the contact of two nonbinding lone pairs. In the case of the pseudocubane arrangement, a repulsive steric effect, which is indicated by RDG analysis, is clearly supported by the cuplike distortions detected in the solid-state structure of the compound. In contrast to the reactions with palladium acetate, where the dichalcogenides were cleaved, during similar reactions with nickel acetate, the dichalcogenides remained intact and trimeric clusters of the composition [Ni-μ²-κ²-(Ni{κ⁵-L^Y}₂)₂-μ²-(OAc)₂] (Y = Se, Te) were formed. Air oxidation and hydrolysis of [Ni-μ²-κ²-(Ni{κ⁵-L^Te}₂)₂-μ²-(OAc)₂] gave a rare example of a hexanuclear nickel cluster of the composition [Ni₂-κ⁵-(Ni₄-κ⁶-μ⁶-{(L'^Te₂O₃)(L'^TeO₂)₂}₂)-μ²-(H₂O)₂], which is composed of a well-defined framework consisting of tellurinic anhydride and tellurinate units, which proves the comparably higher oxidation sensitivity of the trinickel dichalcogenide complexes. Electron spray ionization mass spectrometry spectra of both the palladium and nickel clusters indicate that they show fluctional behavior with varying nuclearity in solution and can adopt multiple charge states especially because of the noninnocence of the chalcogen-based ligands. The complexes were fully characterized by spectroscopic methods, elemental analyses, and X-ray diffraction.

A tellura-Baeyer-Villiger oxidation: one-step transformation of tellurophene into chiral tellurinate lactone

Baeyer-Villiger (BV) oxidation is a fundamental organic reaction, whereas the hetero-BV oxidation is uncharted. Herein, a tellura-BV oxidation is discovered. By oxidizing a tellurophene-embedded and electron-rich polycycle (1) with mCPBA or Oxone, an oxygen atom is inserted into the Te-C bond of the tellurophene to form tellurinate lactone mono-2. This reaction proceeds as follows: (i) 1 is oxidized to the tellurophene Te-oxide form (IM-1); (ii) IM-1 undergoes tellura-BV oxidation to give mono-2. Moreover, the hybrid trichalcogenasumanenes 7 and 8 are, respectively, converted to tellurinate lactones mono-9 and mono-10 under the same conditions, indicating that tellura-BV oxidation shows high chemoselectivity. Due to the strong secondary bonding interactions between the Te[double bond, length as m-dash]O groups on tellurinate lactones, mono-2, mono-9, and mono-10 are dimerized to form U-shaped polycycles 2, 9, and 10, respectively. Notably, mono-2, mono-9, mono-10, and their dimers show chirality. This work enables one-step transformation of tellurophene into tellurinate lactone and construction of intricate polycycles.

Catalytically active nanosized Pd9Te4 (telluropalladinite) and PdTe (kotulskite) alloys: first precursor-architecture controlled synthesis using palladium complexes of organotellurium compounds as single source precursors

Several intermetallic binary phases of Pd-Te including Pd3Te2, PdTe, PdTe2, Pd9Te4, Pd3Te, Pd2Te, Pd20Te7, Pd8Te3, Pd7Te2, Pd7Te3, Pd4Te and Pd17Te4 are known, and negligible work (except few studies on PdTe) has been done on exploring applications of such phases and their fabrication at nanoscale. Hence, Pd(ii) complexes Pd(L1)Cl2 and Pd(L2-H)Cl (L1): Ph-Te-CH2-CH2-NH2 and L2: HO-2-C6H4-CH[double bond, length as m-dash]N-CH2CH2-Te-Ph were synthesized. Under similar thermolytic conditions, complex Pd(L1)Cl2 with bidentate coordination mode of ligand provided nanostructures of Pd9Te4 (telluropalladinite) whereas Pd(L2-H)Cl with tridentate coordination mode of ligand yielded PdTe (kotulskite). Bimetallic alloy nanostructures possess high catalytic potential for Suzuki coupling of aryl chlorides, and reduction of 4-nitrophenol. They are also recyclable upto six reaction cycles in Suzuki coupling.

Nuclearity growth of new PdII complexes induced by the electronic effect of selenium-containing ligands

This work provides a systematic study of how the electronic effect of EDG or EWG in selenium-containing ligands influences the nuclearity of PdII complexes. The solid-state, solution and gas phase behaviors were evaluated for the complexes.

Chemistry inside a Porphyrin Skeleton: Platinacyclopentadiene from Tellurophene

Platinum(II) binds to 21,23-ditelluraporphyrin forming a side-on complex, which can be easily transformed into an aromatic metallaporphyrin, that is, 21-platina-23-telluraporphyrin, with a platinacyclopentadiene unit built in the porphyrin skeleton in place of one pyrrole ring. The central platinum(II) ion with a CCNTe square-planar coordination sphere can be oxidized to platinum(IV) by chlorine, bromine, methyl iodide or allyl chloride to yield octahedral complexes. All platinatelluraporphyrins show dynamic behavior involving the platinum ion coordination sphere fluxionality and the porphyrin skeleton deformation, both in-plane and out-of-plane, as demonstrated by ¹ H NMR spectroscopy.

Reactivity of hemi-labile pyridyl and pyrimidyl derived chalcogen ligands towards group 10 metal phosphine precursors

The reactivity of N-heterocyclic dichalcogenides and their sodium salts towards group 10 metal phosphine precursors has been investigated.

A serendipitous isolation of cocrystallized platinum–tin complexes: synthesis, structure and theoretical exploration

An adduct of co-crystallized platinum–tin fragments has been synthesized and characterized. NBO and EDA analysis have been performed to explore the nature of bonding in fragments, especially the extent of oxophilic character present in tin atoms.

Internally functionalized multifaceted organochalcogen compounds

Internally functionalized multifaceted organochalcogen compounds have been designed and their ligand chemistry has been developed. The palladium complexes show remarkable homogeneous catalytic activity.

Applications of metal selenium/tellurium compounds in materials science

Metal chalcogenides are technologically important materials. Physical, chemical, electrical and mechanical properties of these materials can be fine-tuned by manipulating their shape, size and composition. Although several methods are employed for their synthesis, single-source molecular precursor route has emerged as a versatile strategy for their synthesis and in controlling shape, size and composition of the material under moderate conditions. This chapter gives a brief coverage on the design and development of single-source molecular precursors which have been employed for the preparation of metal selenide/telluride nanocrystals and for deposition of thin films. The discussion includes synthesis of transition-, main group and f-block metal chalcogenolate and/or chalcogenide clusters as precursors and their conversion into metal chalcogenides in the form of thin films and nanostructures. Precursors for ternary metal chalcogenides are also included.

Copper complexes of arylselenolate-based ligands: synthesis and catalytic activity in azide–alkyne cycloaddition reactions

Arylselenolate-based copper complexes have been synthesized and used as pre-catalysts for azide-alkyne cycloaddition reactions.

Bis(6-Diphenylphosphinoacenaphth-5-yl)Telluride as a Ligand toward Manganese and Rhenium Carbonyls

The reaction of the previously known bis(6-diphenylphosphinoacenaphthyl-5-)telluride (6-Ph₂P-Ace-5-)₂Te (IV) with (CO)₅ReCl and (CO)₅MnBr proceeded with the liberation of CO and provided fac-(6-Ph₂P-Ace-5-)₂TeM(X)(CO)₃ (fac-1: M = Re, X = Cl; fac-2: M = Mn, X = Br), in which IV acts as bidentate ligand. In solution, fac-1 and fac-2 are engaged in a reversible equilibrium with mer-(6-Ph₂P-Ace-5-)₂TeM(X)(CO)₃ (mer-1: M = Re, X = Cl; mer-2: M = Mn, X = Br). Unlike fac-1, fac-2 is prone to release another equivalent of CO to give (6-Ph₂P-Ace-5-)₂TeMn(Br)(CO)₂ (3), in which IV serves as tridentate ligand.

Emerging tellurium nanostructures: controllable synthesis and their applications

Tellurium (Te) is a rare element in trace amounts of about one part per billion, comparable to that of platinum and ranked 75th in the abundance of the elements in the earth crust. Te nanostructures, as narrow bandgap semiconductors, have numerous potential applications in the fabrication of many modern devices. The past decades have witnessed an explosion in new strategies for synthesizing diverse emerging Te nanostructures with controlled compositions, sizes, shapes, and structures. Their structure-determined nature makes functional Te nanomaterials an attractive candidate for modern applications. This review focuses on the synthesis and morphology control of emerging Te nanostructures and summarizes the latest developments in the applications of Te nanostructures, such as their use as chemical transformation templates to access a huge family of nanowires/nanotubes, batteries, photodetectors, ion detection and removal, element doping, piezoelectric energy harvesting, gas sensing, thermoelectric devices and many other device applications. Various Te nanostructures with different shapes and structures will exploit the beneficial properties associated with their assembly process and nanofabrication. Finally, the prospects for future applications of Te nanomaterials are summarized and highlighted.

Synthesis, characterization and determination of absolute structures of palladium complexes of novel chiral acyclic tellurated Schiff base ligands

Enantiomerically pure chiral hybrid organotellurium ligands and their asymmetric palladium complexes have been synthesized and characterized.

Synthesis and Characterization of PtTe2 Multi-Crystallite Nanoparticles using Organotellurium Nanocomposites

Herein, we report the synthesis of new PtTe2 multi-crystallite nanoparticles (NPs) in different sizes through an annealing process using new nanostructured Pt-Te organometallic NPs as a single source precursor. This precursor was obtained in a single reaction step using Ph2Te2 and H2PtCl6 and could be successfully size controlled in the nanoscale range. The resulting organometallic composite precursor could be thermally decomposed in 1,5 pentanediol to yield the new PtTe2 multi-crystallite NPs. The final size of the multi-crystallite spheres was successfully controlled by selecting the nanoprecursor size. The sizes of the PtTe2 crystallites formed using the large spheres were estimated to be in the range of 2.5-6.5 nm. The results provide information relevant to understanding specific mechanistic aspects related to the synthesis of organometallic nanomaterials and nanocrystals based on platinum and tellurium.