Speciation in iron epoxidation catalysis: A perspective on the discovery and role of non-heme iron(III)-hydroperoxo species in iron-catalyzed oxidation reactions

Visible-Light Induced and Iron Peroxo-Promoted Radical Difunctionalization of Alkene for the Synthesis of β-Ketosulfone and α-Chloroketone

In this work, a switchable synthesis of β-ketosulfone and α-chloroketone through a radical difunctionalization of alkenes is reported. The transformation works well under iron peroxo species/photoredox dual catalysis and an open-flask atmosphere, and the reaction is highlighted with good yields and a broad reaction scope. Mechanism studies show that the reaction is initiated by a formal [4 + 2] cyclization of the sulfonyl radical in a regioselective manner.

Photoredox/Iron Dual-Catalysis-Enabled [4 + 2] Cyclization of Acyl Nitrene with Alkynes

In this work, the annulation of acyl nitrene with alkynes is reported under photoredox/iron dual-catalysis for the synthesis of a series of isoquninalin-2-ones. The reaction is featured with a high reaction regioselectivity and good reaction generality. In particular, the resulting isoquinalin-2-ones could be structurally elaborated into several biologically interesting scaffolds. Mechanism investigation suggests that the reaction was ascribed to a formal [4 + 2] cyclization. It is believed that this reaction represents an initial example of preparing isoquinolin-1-ones from ferric peroxyl-catalyzed nitrene insertion.

Impact of Ligand Design on an Iron NHC Epoxidation Catalyst

An open-chain iron pyridine-NHC framework is expanded utilizing a benzimidazole moiety to deepen the understanding of the impact of electronic variations on iron NHC epoxidation catalysts, especially regarding the stability. The thereby newly obtained iron(II) NHC complex is characterized and employed in olefin epoxidation. It is remarkably temperature tolerant and achieves a TOF of ca. 10 000 h-1 and TON of ca. 700 at 60 °C in the presence of the Lewis acid Sc(OTf)3, displaying equal stability, but lower activity than the unmodified iron pyridine-NHC (pre-)catalyst. In addition, a synthetic approach towards another ligand containing 2-imidazoline units is described but formylation as well as hydrolysis hamper its successful synthesis.

Electrochemical approach of the reductive activation of O2 by a nonheme FeII complex. Some clues for the development of catalytic oxidations

We report an in-depth study of the reductive activation of O2 by the nonheme [FeII(L25)(MeCN)]2+ complex carried out by cyclic voltammetry. Experimental evidence is obtained for the slow coordination of dioxygen to the ferrous center yielding an FeII/O2 adduct with a strong FeII-O2 character rather than an FeIII-superoxo one. Electron injection in the FeII-O2 species occurs at a potential of ca. -700 mV vs. SCE, i.e. 200 mV above the O2 to O2˙- reduction, leading to the formation of a FeIII-peroxo intermediate and then FeIII-hydroperoxo upon protonation by residual water. The experimental CVs recorded at variable scan rate or variable FeII concentration are well simulated taking into account a detailed mechanism initiated by the competitive reduction of O2 and the FeII-O2 adduct. Analysis of the concentration of the reaction intermediates generated as a function of the applied potential indicates that the FeIII-peroxo intermediate significantly accumulates at a potential of -650 mV. Oxidative bromination of anisole is assayed under electrolytic conditions at this potential to yield bromoanisole products. The low faradaic yields observed reveal that deleterious reactions such as direct reduction of reaction intermediates likely occur. Based on the detailed mechanism elucidated, a number of improvements to achieve more efficient catalytic reactions can be proposed.

Iron-catalyzed selective construction of indole derivatives via oxidative C(sp3)-H functionalization of indolin-2-ones

Considering the importance of developing powerful catalysts and the pharmacophore characteristics of indole derivatives, we describe a switchable approach for the iron-catalyzed oxidative C(sp3)-H functionalization of indolin-2-ones. Selective transformations displayed excellent activity and chemoselectivity using FeCl2 as the catalyst, air as the oxidant, and alcohol as the solvent. By manipulating the reaction conditions, particularly the choice of solvent, catalyst loading, and reaction sequence, a series of valuable indole derivatives, including isatins and symmetrical and nonsymmetrical isoindigos, were selectively synthesized in good to excellent yields. Furthermore, the gram-scale synthesis of compounds with biological anticancer activity under simple conditions highlights their great potential in practical applications.

Effect of interaction between dissolved organic matter and iron/manganese (hydrogen) oxides on the degradation of organic pollutants by in-situ advanced oxidation techniques

Iron and manganese (hydrogen) oxides (IMHOs) exhibit excellent redox capabilities for environmental pollutants and are commonly used in situ chemical oxidation (ISCO) technologies for the degradation of organic pollutants. However, the coexisting dissolved organic matter (DOMs) in surface environments would influence the degradation behavior and fate of organic pollutants in IMHOs-based ISCO. This review has summarized the interactions and mechanisms between DOMs and IMHOs, as well as the properties of DOM-IMHOs complexes. Importantly, the promotion or inhibition impact of DOM was discussed from three perspectives. First, the presence of DOMs may hinder the accessibility of active sites on IMHOs, thus reducing their efficiency in degrading organic pollutants. The formation of compounds between DOMs and IMHOs alters their stability and activity in the degradation process. Second, the presence of DOMs may also affect the generation and transport of active species, thereby influencing the oxidative degradation process of organic pollutants. Third, specific components within DOMs also participate and affect the degradation pathways and rates. A comprehensive understanding of the interaction between DOMs and IMHOs helps to better understand and predict the degradation process of organic pollutants mediated by IMHOs in real environmental conditions and contributes to the further development and application of IMHO-mediated ISCO technology.

Water co-catalysis in aerobic olefin epoxidation mediated by ruthenium oxo complexes

We report the development of a versatile Ru-porphyrin catalyst system which performs the aerobic epoxidation of aromatic and aliphatic (internal) alkenes under mild conditions, with product yields of up to 95% and turnover numbers (TON) up to 300. Water is shown to play a crucial role in the reaction, significantly increasing catalyst efficiency and substrate scope. Detailed mechanistic investigations employing both computational studies and a range of experimental techniques revealed that water activates the RuVI di-oxo complex for alkene epoxidation via hydrogen bonding, stabilises the RuIV mono-oxo intermediate, and is involved in the regeneration of the RuVI di-oxo complex leading to oxygen atom exchange. Distinct kinetics are obtained in the presence of water, and side reactions involved in catalyst deactivation have been identified.

pH-Driven Efficacy of the Ferrate(VI)-Peracetic Acid System in Swift Sulfonamide Antibiotic Degradation: A Deep Dive into Active Species Evolution and Mechanistic Insights

In the realm of wastewater treatment, the power of ferrate (Fe(VI)) and peracetic acid (PAA) as oxidants stands out. But their combined might is where the enhancement truly lies. Their collaborative effect intensifies, but the underlying mechanics, especially across varying pH levels and pollutant types, still lurks in obscurity. Our study delved into the sophisticated oxidation interplay among Fe(VI)-PAA, Fe(VI)-H2O2, and standalone Fe(VI) systems. Notably, at a pH of 9.0, boasting a kinetic constant of ∼0.127 M-1·s-1, the Fe(VI)-PAA system annihilated the pollutant sulfamethoxazole, outpacing its counterparts by a staggering 48.73-fold when compared to the Fe(VI)-H2O2 system and 105.58-fold when using Fe(VI) individually. The behavior of active species─such as the dynamic •OH radicals and high-valent iron species (Fe(IV)/Fe(V))─shifted with pH variations, leading to distinct degradation pathways. Our detailed exploration pinpoints the behaviors of certain species across pH levels from 3.0 to 9.0. In more acidic environments, the •OH species proved indispensable for the system's reactivity. Conversely, as the pH inclined, degradation was increasingly steered by high-valent iron species. This intensive probe demystifies Fe(VI) interactions, deepening our understanding of the capabilities of the Fe(VI)-centered system and guiding us toward cleaner water solutions. Importantly, pH value, often underappreciated, holds the reins in organic wastewater decontamination. Embracing this key player is vital as we strategize for more expansive systems in upcoming ventures.

Peroxymonosulfate Activation by Fe(III)-Picolinate Complexes for Efficient Water Treatment at Circumneutral pH: Fe(III)/Fe(IV) Cycle and Generation of Oxyl Radicals

Improving the reactivity of Fe(III) for activating peroxymonosulfate (PMS) at circumneutral pH is critical to propel the iron-activated PMS processes toward practical wastewater treatment but is yet challenging. Here we employed the complexes of Fe(III) with the biodegradable picolinic acid (PICA) to activate PMS for degradation of selected chlorinated phenols, antibiotics, pharmaceuticals, herbicides, and industrial compounds at pH 4.0-6.0. The FeIII-PICA complexes greatly outperformed the ligand-free Fe(III) and other Fe(III) complexes of common aminopolycarboxylate ligands. In the main activation pathway, the key intermediate is a peroxymonosulfate complex, tentatively identified as PICA-FeIII-OOSO3-, which undergoes O-O homolysis or reacts with FeIII-PICA and PMS to yield FeIV=O and SO4•- without the involvement of commonly invoked Fe(II). PICA-FeIII-OOSO3- can also react directly with certain compounds (chlorophenols and sulfamethoxazole). The relative contributions of PICA-FeIII-OOSO3-, FeIV=O, and SO4•- depend on the structure of target compounds. This work sets an eligible example to enhance the reactivity of Fe(III) toward PMS activation by ligands and sheds light on the previously unrecognized role of the metal-PMS complexes in directing the catalytic cycle and decontamination as well.

Challenges Relating to the Quantification of Ferryl(IV) Ion and Hydroxyl Radical Generation Rates Using Methyl Phenyl Sulfoxide (PMSO), Phthalhydrazide, and Benzoic Acid as Probe Compounds in the Homogeneous Fenton Reaction

Ferryl ion ([FeIVO]2+) has often been suggested to play a role in iron-based advanced oxidation processes (AOPs) with its presence commonly determined using the unique oxidation pathway from methyl phenyl sulfoxide (PMSO) to methyl phenyl sulfone (PMSO2). However, we show here that the oxidation products of PMSO, formed on reaction with hydroxyl radical, enhance PMSO2 formation as a result of their complexation with Fe(III) leading to the changes in the reactivity of Fe(III) species in the homogeneous Fenton reaction. As such, PMSO should be used with caution to investigate the role of [FeIVO]2+ in iron-based AOPs with these insights suggesting the need to reassess the findings of many previous studies in which this reagent was used. The other common target compounds, phthalhydrazide and hydroxybenzoic acids, were also found to modify the rate and extent of iron cycling as a result of complexation and/or redox reactions, either by the probe compound itself and/or oxidation products formed. Overall, this study highlights that these confounding effects of the aromatic probe compounds on the reactivity of iron species should be recognized if reliable mechanistic insights into iron-based AOPs are to be obtained.

Dioxygen Reduction and Bioinspired Oxidations by Non-heme Iron(II)-α-Hydroxy Acid Complexes

Aerobic organisms involve dioxygen-activating iron enzymes to perform various metabolically relevant chemical transformations. Among these enzymes, mononuclear non-heme iron enzymes reductively activate dioxygen to catalyze diverse biological oxidations, including oxygenation of C-H and C═C bonds and C-C bond cleavage with amazing selectivity. Several non-heme enzymes utilize organic cofactors as electron sources for dioxygen reduction, leading to the generation of iron-oxygen intermediates that act as active oxidants in the catalytic cycle. These unique enzymatic reactions influence the design of small molecule synthetic compounds to emulate enzyme functions and to develop bioinspired catalysts for performing selective oxidation of organic substrates with dioxygen. Selective electron transfer during dioxygen reduction on iron centers of synthetic models by a sacrificial reductant requires appropriate design strategies. Taking lessons from the role of enzyme-cofactor complexes in the selective electron transfer process, our group utilized ternary iron(II)-α-hydroxy acid complexes supported by polydentate ligands for dioxygen reduction and bioinspired oxidations. This Account focuses on the role of coordinated sacrificial reductants in the selective electron transfer for dioxygen reduction by iron complexes and highlights the versatility of iron(II)-α-hydroxy acid complexes in affecting dioxygen-dependent oxidation/oxygenation reactions. The iron(II)-coordinated α-hydroxy acid anions undergo two-electron oxidative decarboxylation concomitant with the generation of reactive iron-oxygen oxidants. A nucleophilic iron(II)-hydroperoxo species was intercepted in the decarboxylation pathway. In the presence of a Lewis acid, the O-O bond of the nucleophilic oxidant is heterolytically cleaved to generate an electrophilic iron(IV)-oxo-hydroxo oxidant. Most importantly, the oxidants generated with or without Lewis acid can carry out cis-dihydroxylation of alkenes. Furthermore, the electrophilic iron-oxygen oxidant selectively hydroxylates strong C-H bonds. Another electrophilic iron(IV)-oxo oxidant, generated from the iron(II)-α-hydroxy acid complexes in the presence of a protic acid, carries out C-H bond halogenation by using a halide anion.Thus, different metal-oxygen intermediates could be generated from dioxygen using a single reductant, and the reactivity of the ternary complexes can be tuned using external additives (Lewis/protic acid). The catalytic potential of the iron(II)-α-hydroxy complexes in performing O2-dependent oxygenations has been demonstrated. Different factors that govern the reactivity of iron-oxygen oxidants from ternary iron(II) complexes are presented. The versatile reactivity of the oxidants provides useful insights into developing catalytic methods for the selective incorporation of oxidized functionalities under environmentally benign conditions using aerial oxygen as the terminal oxidant.

Iron-catalyzed β-hydroxymethylative carbonylation of styrene under photo-irradiation

This study describes an iron-catalyzed divergent oxidation of styrene into β-hydroxylmethylketone and ketone under photo-irradiation. This divergence is ascribed to the use of styrene with various substituents. More importantly, methanol is oxidized into formaldehyde in the reaction and serves as a C1 synthon. Mechanism investigations show that the reaction is initiated by oxidative SET to transfer styrene into the cation radical. The reaction pathway undergoes HAT and β-hydride elimination as well as a concerted cyclization. Particularly, several drug-like molecules, such as melperone analogue, lenperone analogue, and haloperidol analogue, are synthesized. In addition, this method is also applicable to the synthesis of natural product (R)-atomoxetine.

FeII complexes supported by an iminophosphorane ligand: synthesis and reactivity

The synthesis of iron complexes supported by a mixed phosphine-lutidine-iminophosphorane (PPyNP) ligand was carried out. While bidentate κ2-N,N coordination was observed for FeCl2, pincer coordination modes were adopted at cationic iron centers, either through dechlorination of [LFe(PPyNP)Cl2] (1) or direct coordination of PPyNP to Fe(OTf)2. Reaction with tert-butylisocyanide gave access to the diamagnetic octahedral complex [Fe(PPyNP)(CNtBu)3]X2 (X = OTf (4), Cl (4')). Both 1 and 4 were shown to undergo deprotonation of the phosphinomethyl group, but the resulting complexes were not active for the dehydrogenative coupling of hexan-1-ol. The hydrosilylation of acetophenones was catalyzed at room temperature with 1 mol% of a catalyst generated in situ from cationic PPyNP-supported iron triflate complexes and KHBEt3.

Cyclic iron tetra N-heterocyclic carbenes: synthesis, properties, reactivity, and catalysis

Cyclic iron tetracarbenes are an emerging class of macrocyclic iron N-heterocyclic carbene (NHC) complexes. They can be considered as an organometallic compound class inspired by their heme analogs, however, their electronic properties differ, e.g. due to the very strong σ-donation of the four combined NHCs in equatorial coordination. The ligand framework of iron tetracarbenes can be readily modified, allowing fine-tuning of the structural and electronic properties of the complexes. The properties of iron tetracarbene complexes are discussed quantitatively and correlations are established. The electronic nature of the tetracarbene ligand allows the isolation of uncommon iron(III) and iron(IV) species and reveals a unique reactivity. Iron tetracarbenes are successfully applied in C-H activation, CO₂ reduction, aziridination and epoxidation catalysis and mechanisms as well as decomposition pathways are described. This review will help researchers evaluate the structural and electronic properties of their complexes and target their catalyst properties through ligand design.

Recent advances in small-molecule fluorescent probes for studying ferroptosis

Ferroptosis is an iron-dependent, non-apoptotic form of programmed cell death driven by excessive lipid peroxidation (LPO). Mounting evidence suggests that the unique modality of cell death is involved in the development and progression of several diseases including cancer, cardiovascular diseases (CVDs), neurodegenerative disorders, etc. However, the pathogenesis and signalling pathways of ferroptosis are not fully understood, possibly due to the lack of robust tools for the highly selective and sensitive imaging of ferroptosis analytes in complex living systems. Up to now, various small-molecule fluorescent probes have been applied as promising chemosensors for studying ferroptosis through tracking the biomolecules or microenvironment-related parameters in vitro and in vivo. In this review, we comprehensively reviewed the recent development of small-molecule fluorescent probes for studying ferroptosis, with a focus on the analytes, design strategies and bioimaging applications. We also provided new insights to overcome the major challenges in this emerging field.

The first macrocyclic abnormally coordinating tetra-1,2,3-triazole-5-ylidene iron complex: a promising candidate for olefin epoxidation

The first macrocyclic and abnormally coordinating, mesoionic N-heterocyclic carbene iron complex has been synthesised and characterised via ESI-MS, EA, SC-XRD, CV, NMR and UV/Vis spectroscopy. ¹³C-NMR spectroscopy and CV measurements indicate a strong σ-donor ability of the carbene moieties, suggesting an efficient catalytic activity of the iron complex in oxidation reactions. Initial tests in the epoxidation of cis-cyclooctene as a model substrate confirm this assumption.

Methane Monooxygenase Mimic Asymmetric Oxidation: Self-Assembling μ-Hydroxo, Carboxylate-Bridged Diiron(III)-Catalyzed Enantioselective Dehydrogenation

Mimicking naturally occurring metalloenzymes to enrich the diversity of catalytic asymmetric oxidation reactions is a long-standing goal for modern chemistry. Toward this end, a range of methane monooxygenase (MMO) mimic chiral carboxylate-bridged (μ-hydroxo) diiron(III) dimer complexes using salan as basal ligand and sodium aryl carboxylate as additive have been designed and synthesized. The chiral diiron complexes exhibit efficient catalytic reactivity in dehydrogenative kinetic resolution of indolines using environmentally benign hydrogen peroxide as oxidant. In particular, complex C9 bearing sterically encumbered salan ligands and a 2-naphthoate bridge is identified as the optimal catalyst in terms of chiral recognition. Further investigation reveals that this MMO mimic chiral catalyst can be readily generated by self-assembly under the dehydrogenation conditions. The self-assembling catalytic system is applicable to a series of indolines with multiple stereocenters and diverse substituent patterns in high efficiency with a high level of chiral recognition (selectivity factor up to 153). Late-stage dehydrogenative kinetic resolution of bioactive molecules is further examined.

Organometallic 3d transition metal NHC complexes in oxidation catalysis

The development of processes for the selective oxidation of hydrocarbons is a major focus in catalysis research. Making this process simultaneously environmentally friendly is still challenging. 3d transition metals are...

Role of Organic Fluoride Salts in Stabilizing Niobium Oxo-Clusters Catalyzing Epoxidation

We present here that easily available organic salts can stabilize/modify niobium (Nb) oxo-clusters. The as-synthesized Nb oxo-clusters have been characterized by various methods. These Nb oxo-clusters were catalytically active for the epoxidation of allylic alcohols and olefins with H₂O₂ as an oxidant. Notably, Nb-OC@TBAF-0.5 appeared as highly dispersed nanosized particles and showed the highest catalytic activity, which can be attributed to the following reasons on the basis of characterization. First, the strong coordination of fluorine ions with Nb sites and the steric protection with bulky organic cations led to high stabilization and dispersion of the oxo-clusters in the course of the reaction. Second, a hydrogen-bond interaction between the coordinated fluorine atom and the -OH group of allylic alcohol favored the epoxidation reaction. Third, the electron density of Nb sites decreased due to the strong electron-withdrawing ability of F^- adjacent to Nb sites, thus promoting the electrophilic oxygen transfer to the C═C bond.

The Fenton Reaction in Water Assisted by Picolinic Acid: Accelerated Iron Cycling and Co-generation of a Selective Fe-Based Oxidant

The Fenton reaction is limited by a narrow acidic pH range, the slow reduction of Fe(III), and susceptibility of the nonselective hydroxyl radical (HO^•) to scavenging by water constituents. Here, we employed the biodegradable chelating agent picolinic acid (PICA) to address these concerns. Compared to the classical Fenton reaction at pH 3.0, PICA greatly accelerated the degradation of atrazine, sulfamethazine, and various substituted phenols at pH 5.0 in a reaction with autocatalytic characteristics. Although HO^• served as the principal oxidant, a high-spin, end-on hydroperoxo intermediate, tentatively identified as PICA-Fe^III-OOH, also exhibited reactivity toward several test compounds. Chloride release from the oxidation of 2,4,6-trichlorophenol and the positive slope of the Hammett correlation for a series of halogenated phenols were consistent with PICA-Fe^III-OOH reacting as a nucleophilic oxidant. Compared to HO^•, PICA-Fe^III-OOH is less sensitive to potential scavengers in environmental water samples. Kinetic analysis reveals that PICA facilitates Fe(III)/Fe(II) transformation by accelerating Fe(III) reduction by H₂O₂. Autocatalysis is ascribed to the buildup of Fe(II) from the reduction of Fe(III) by H₂O₂ as well as PICA oxidation products. PICA assistance in the Fenton reaction may be beneficial to wastewater treatment because it favors iron cycling, extends the pH range, and balances oxidation universality with selectivity.

Enhancing Chemo- and Stereoselectivity in C-H Bond Oxygenation with H2O2 by Nonheme High-Spin Iron Catalysts: The Role of Lewis Acid and Multimetal Centers

Spin states of iron often direct the selectivity in oxidation catalysis by iron complexes using hydrogen peroxide (H₂O₂) on an oxidant. While low-spin iron(III) hydroperoxides display stereoselective C-H bond hydroxylation, the reactions are nonstereoselective with high-spin iron(II) catalysts. The catalytic studies with a series of high-spin iron(II) complexes of N4 ligands with H₂O₂ and Sc³⁺ reported here reveal that the Lewis acid promotes catalytic C-H bond hydroxylation with high chemo- and stereoselectivity. This reactivity pattern is observed with iron(II) complexes containing two cis-labile sites. The enhanced selectivity for C-H bond hydroxylation catalyzed by the high-spin iron(II) complexes in the presence of Sc³⁺ parallels that of the low-spin iron catalysts. Furthermore, the introduction of multimetal centers enhances the activity and selectivity of the iron catalyst. The study provides insights into the development of peroxide-dependent bioinspired catalysts for the selective oxygenation of C-H bonds without the restriction of using iron complexes of strong-field ligands.

Activation of Molecular Oxygen by a Cobalt(II) Tetra-NHC Complex*

The first dicobalt(III) μ2 -peroxo N-heterocyclic carbene (NHC) complex is reported. It can be quantitatively generated from a cobalt(II) compound bearing a 16-membered macrocyclic tetra-NHC ligand via facile activation of dioxygen from air at ambient conditions. The reaction proceeds via an end-on superoxo intermediate as demonstrated by EPR studies and DFT. The peroxo moiety can be cleaved upon addition of acetic acid, yielding the corresponding CoIII acetate complex going along with H2 O2 formation. In contrast, both CoII and CoIII complexes are also studied as catalysts to utilize air for olefin and alkane oxidation reactions; however, not resulting in product formation. The observations are rationalized by DFT-calculations, suggesting a nucleophilic nature of the dicobalt(III) μ2 -peroxo complex. All isolated compounds are characterized by NMR, ESI-MS, elemental analysis, EPR and SC-XRD.

Degradation pathways of a highly active iron(iii) tetra-NHC epoxidation catalyst

Elucidation of different decomposition pathways of a highly active tetradentate iron–NHC epoxidation catalyst reveals direct carbene oxidation to be the decisive cause of catalyst degradation.

FeIII and FeII Phosphasalen Complexes: Synthesis, Characterization, and Catalytic Application for 2-Naphthol Oxidative Coupling

We report on the synthesis and characterization of three iron(III) phosphasalen complexes, [Fe^III (Psalen)(X)] differing in the nature of the counter-anion/exogenous ligand (X^- =Cl^- , NO₃ ^- , OTf^- ), as well as the neutral iron(II) analogue, [Fe^II (Psalen)]. Phosphasalen (Psalen) differs from salen by the presence of iminophosphorane (P=N) functions in place of the imines. All the complexes were characterized by single-crystal X-ray diffraction, UV/Vis, EPR, and cyclic voltammetry. The [Fe^II (Psalen)] complex was shown to remain tetracoordinated even in coordinating solvent but surprisingly exhibits a magnetic moment in line with a Fe^II high-spin ground state. For the Fe^III complexes, the higher lability of triflate anion compared to nitrate was demonstrated. As they exhibit lower reduction potentials compared to their salen analogues, these complexes were tested for the coupling of 2-naphthol using O₂ from air as oxidant. In order to shed light on this reaction, the interaction between 2-naphthol and the Fe^III (Psalen) complexes was studied by cyclic voltammetry as well as UV/Vis spectroscopy.

Iron-Catalyzed Oxidation of 1-Phenylethanol and Glycerol With Hydrogen Peroxide in Water Medium: Effect of the Nitrogen Ligand on Catalytic Activity and Selectivity

The iron(II) complexes [Fe(bpy)₃](OTf)₂ (bpy = 2,2'-bipyridine; OTf = CF₃SO₃) (1) and [Fe(bpydeg)₃](OTf)₂ (bpydeg = N⁴,N⁴-bis(2-(2-methoxyethoxy)ethyl) [2,2'-bipyridine]-4,4'-dicarboxamide) (2), the latter being a newly synthesized ligand, were employed as catalyst precursors for the oxidation of 1-phenylethanol with hydrogen peroxide in water, using either microwave or conventional heating. With the same oxidant and medium the oxidation of glycerol was also explored in the presence of 1 and 2, as well as of two similar iron(II) complexes bearing tridentate ligands, i.e., [Fe(terpy)₂](OTf)₂ (terpy = 2, 6-di(2-pyridyl)pyridine) (3) and [Fe(bpa)₂](OTf)₂ (bpa = bis(2-pyridinylmethyl)amine) (4): in most reactions the major product formed was formic acid, although with careful tuning of the experimental conditions significant amounts of dihydroxyacetone were obtained. Addition of heterocyclic amino acids (e.g., picolinic acid) increased the reaction yields of most catalytic reactions. The effect of such additives on the evolution of the catalyst precursors was studied by spectroscopic (NMR, UV-visible) and ESI-MS techniques.

Electronic Finetuning of a Bio-inspired Iron(II) tetra-NHC Complex by trans Axial Isocyanide Substitution

The synthesis of trans axially substituted mono- (1 a) and bis(tert-butylisocyanide) (1 b) derivatives of the highly active homogeneous bio-inspired iron(II) olefin epoxidation (pre-)catalyst 1 bearing an equatorial macrocyclic tetra N-heterocyclic carbene and two trans axial labile acetonitrile ligands is reported. NMR spectroscopy and SC-XRD indicate a considerable π-backdonation from the iron(II) centres to the isocyanide ligand(s). The impact of isocyanide substitution on the electronic features of the complexes is studied by cyclic voltammetry revealing a significant increase in half-cell potential assignable to the reversible Fe(II)/Fe(III) redox couple with an increasing number of isocyanides as a result of their π-accepting properties: E1/2 =0.15 V (1), E1/2 =0.35 V (1 a), E1/2 =0.44 V (1 b).

Bio-inspired Nonheme Iron Oxidation Catalysis: Involvement of Oxoiron(V) Oxidants in Cleaving Strong C-H Bonds

Nonheme iron enzymes generate powerful and versatile oxidants that perform a wide range of oxidation reactions, including the functionalization of inert C-H bonds, which is a major challenge for chemists. The oxidative abilities of these enzymes have inspired bioinorganic chemists to design synthetic models to mimic their ability to perform some of the most difficult oxidation reactions and study the mechanisms of such transformations. Iron-oxygen intermediates like iron(III)-hydroperoxo and high-valent iron-oxo species have been trapped and identified in investigations of these bio-inspired catalytic systems, with the latter proposed to be the active oxidant for most of these systems. In this Review, we highlight the recent spectroscopic and mechanistic advances that have shed light on the various pathways that can be accessed by bio-inspired nonheme iron systems to form the high-valent iron-oxo intermediates.

Manganese Catalysts with Tetradentate N-donor Pyridine-Appended Bipiperidine Ligands for Olefin Epoxidation Reactions: Ligand Electronic Effect and Mechanism

In this work, we described an electron-rich manganese mesoPYBP catalyst, Mn-SR-mesoPYBP(ClO4)2, by introducing electron-donating substituents on the mesoPYBP ligand. We optimized the catalytic performance in olefin epoxidation with H2O2 in the presence of acetic acid. The electron paramagnetic resonance (EPR) and cyclic voltammetry (CV) studies supported that an electronic effect could stabilize the high-valent intermediates in the catalytic cycles of the catalyst, which largely improved the catalytic performance and the reactivity of olefin epoxidation.

Pushing the limits of activity and stability: the effects of Lewis acids on non-heme iron–NHC epoxidation catalysts

Tetradentate iron–NHC complexes exhibit unprecedented activity (TOF: 410 000 h⁻¹) in the epoxidation of cis-cyclooctene by addition of Lewis acids.

Iron(ii) tetrafluoroborate complexes of new tetradentate C-scorpionates as catalysts for the oxidative cleavage of trans-stilbene with H2O2

Iron(ii) complexes of two new tetradentate C-scorpionate ligands are characterized. Both catalyze stilbene cleavage using either H₂O₂ or a O₂/photocatalyst oxidant.