Metal-promoted C1 polymerizations

Assembly Structure Formation in Bulk and Ultrathin Films of Poly(substituted methylene) Having an Azobenzene Side Chain

The density of the side chain introduced to a polymer main chain greatly influences the properties and functions of the polymer. This work first reports on the packing structure and properties at an interface of a poly(substituted methylene) where an azobenzene side chain is introduced at every carbon atom in the main chain (C1PAz). The structure and properties are compared with those of a conventional vinyl polymer [poly(methacrylate)] possessing an identical side-chain structure (C2PAz). The packing structure in the bulk state analyzed by X-ray measurements revealed that C1PAz adopts a highly ordered rectangular unit cell structure, whereas C2PAz shows a less ordered lamellar one. Langmuir film balance experiments indicated that both polymers with the trans-azobenzene give essentially the identical 2D side-chain occupying area on water, which agrees well with the smectic B (hexatic packing) model based on the X-ray data. Upon transfer onto a solid substrate, only C1PAz shows a conformational transformation to a spread bilayer-type layer, most probably due to conformational frustration stemming from the crowding of the side chains. This study proposes new insights into the effects of side-chain density on the self-assembly and photoreaction of azobenzene-containing polymers, which are expected to expand the possibilities of polymer design for various applications.

One-pot asymmetric living copolymerization-induced chiral self-assemblies and circularly polarized luminescence

Controlled synthesis of conjugated block polymers enables the optimization of their self-assembly and may lead to distinct optical properties and functionalities. Herein, we report a direct chain extension of one-handed helical poly(acyl methane) with 1-ethynyl-4-iodo-2,5-bis(octyloxy)benzene, affording well-defined π-conjugated poly(acyl methane)-b-poly(phenylene ethynylene) copolymers. Although the distinct monomers are polymerized via different mechanisms, the one-pot copolymerization follows a living polymerization manner, giving the desired optically active block copolymers with controllable molar mass and low distribution. The block copolymerization induced chiral self-assembly simultaneously due to the one-handed helicity of the poly(acyl methane) block, giving spherical nanoparticles, one-handed helices, and chiral micelles with controlled dimensions regarding the composition of the generated copolymers. Interestingly, the chiral assemblies exhibit clear circularly polarized luminescence with tunable handedness and a high dissymmetric factor.

Controlled Radical Polymerization of Acrylates and Isocyanides Installs Degradable Functionality into Novel Copolymers

Installing ketones into a polymer backbone is a known method for introducing photodegradability into polymers; however, most current methods are limited to ethylene-carbon monoxide copolymerization. Here we use isocyanides in place of carbon monoxide in a copolymerization strategy to access degradable nonalternating poly(ketones) that either maintain or enhance the thermal properties. A cobalt-mediated radical polymerization of acrylates and isocyanides synthesizes nonalternating poly(acrylate-co-isocyanide) copolymers with tunable incorporation using monomer feed ratios. The kinetic product of the polymerization is a dynamic β-imine ester that tautomerizes to the β-enamine ester. Hydrolysis of this copolymer affords a third copolymer microstructure─the elusive nonalternating poly(ketone)─from a single copolymerization strategy. Analysis of the copolymer properties demonstrates tunable thermal properties with the degree of incorporation. Finally, we show that poly(acrylate-co-isocyanide) and poly(acrylate-co-ketone) are photodegradable with 390 nm light, enabling chain cleavage.

Evidence for Carbene Intermediates in Isocyanide Homologation by Aluminium(I)

The C-C bond formation between C1 molecules plays an important role in chemistry as manifested by the Fischer-Tropsch (FT) process. Serving as models for the FT process, we report here the reactions between a neutral AlI complex (Me NacNac)Al (1, Me NacNac=HC[(CMe)(NDipp)]2 , Dipp=2,6-diisopropylphenyl) and various isocyanides. The step-by-step coupling mechanism was studied in detail by low-temperature NMR monitoring, isotopic labeling, as well as quantum chemical calculations. Three different products were isolated in reaction of 1 with the sterically encumbered 2,6-bis(benzhydryl)-4-Me-phenyl isocyanide (BhpNC). These products substantiate carbene intermediates. The reaction between 1 and adamantyl isocyanide (AdNC) generated a trimerization product, and a corresponding carbene intermediate could be trapped in the form of a molybdenum(0) complex. Tri-, tetra-, and even pentamerization products were isolated with the sterically less congested phenyl and p-methoxyphenyl isocyanides (PhNC and PMPNC) with concurrent construction of quinoline or indole heterocycles. Overall, this study provides evidence for carbene intermediates in FT-type chemistry of aluminium(I) and isocyanides.

Controlled reductive C-C coupling of isocyanides promoted by an aluminyl anion

We report the reaction of the potassium aluminyl, K[Al(NON)] ([NON]^2- = [O(SiMe₂NDipp)₂]^2-, Dipp = 2,6-iPr₂C₆H₃) with a series of isocyanide substrates (R-NC). In the case of tBu-NC, degradation of the isocyanide was observed generating an isomeric mixture of the corresponding aluminium cyanido-κC and -κN compounds, K[Al(NON)(H)(CN)]/K[Al(NON)(H)(NC)]. The reaction with 2,6-dimethylphenyl isocyanide (Dmp-NC), gave a C₃-homologation product, which in addition to C-C bond formation showed dearomatisation of one of the aromatic substituents. In contrast, using adamantyl isocyanide Ad-NC allowed both the C₂- and C₃-homologation products to be isolated, allowing a degree of control to be exercised over the chain growth process. These data also show that the reaction proceeds through a stepwise addition, supported in this study by the synthesis of the mixed [(Ad-NC)₂(Dmp-NC)]^2- product. Computational analysis of the bonding within the homologised products confirm a high degree of multiple bond character in the exocyclic ketenimine units of the C₂- and C₃-products. In addition, the mechanism of chain growth was investigated, identifying different possible pathways leading to the observed products, and highlighting the importance of the potassium cation in formation of the initial C₂-chain.

Facile preparation of optically active helical polycarbenes with salicylate substituents and their postpolymerization modification

Optically active helical polycarbenes were constructed through the living and controlled helix-sense-selective polymerization (HSSP) of methyl salicylate modified diazoacetate monomer catalysed via π-allylPdCl with chiral phosphine ligands. The obtained helical polycarbenes could undergo postpolymerization modification to afford functional polycarbenes efficiently.

Relaxation and Amorphous Structure of Polymers Containing Rigid Fumarate Segments

The physical properties of polymers are significantly affected by relaxation processes. Recently, we reported that poly(diethyl fumarate) (PDEF) shows two thermal anomalies on DSC measurement, despite the fact that it is a homopolymer. We attribute these two relaxations α relaxation and β relaxation, respectively. In this study, we investigate the two relaxations of fumarate-containing polymers by DSC, solid-state NMR, and X-ray scattering. The two relaxations are present even in a copolymer of diethyl fumarate and ethyl acrylate with fumarate segments of 30%. We used poly(methyl methacrylate) (PMMA) as a model polymer for comparison, since there are detailed investigations of its dynamics and physical properties. Solid-state NMR indicates that the very local relaxation of poly(fumarate)s is not significantly different from that of PMMA. The tensile test showed that PDEF is still brittle at above β relaxation temperature and below α relaxation temperature. It was revealed that a structural anisotropy appeared when PDEF was extended at around α relaxation temperature. We discuss the effect of the glassy packing of the rigid polymer chain including the DEF segments on the strong β relaxation behavior. Our data provide insight into the microscopic mechanism of β relaxation of vinyl polymers.

Synthesis of Optically Active Helical Polycarbenes through Helix-Sense-Selective Polymerization Strategy and Their Application in Chiral Separation

In this work, helical polycarbenes with optical activity were designed and facilely synthesized through the helix-sense-selective polymerization (HSSP) of the diazoacetate monomer with a dimethylbenzyl ester pendant catalyzed by π-allylPdCl with chiral phosphine ligands at room temperature. The polymerization was carried out in a living and controlled style, and a range of helical polycarbenes with the desired number-average molecular weights and narrow molecular weight distributions were obtained. Circular dichroism and UV-vis analyses revealed that these polycarbenes exhibited a stable helical conformation with a preferred handedness, and their helical directions were dependent on the chirality of the chiral phosphine ligands. Further studies showed that the helical conformation of the obtained polycarbenes was from the polymeric backbone rather than the intermolecular aggregation in the solutions. Moreover, the prepared, optically active, helical polycarbenes possessed excellent enantioselective crystallization ability for threonine racemates. The enantiomeric excess (e.e.) of the induced crystals could be up to 83% via utilizing the prepared helical polycarbenes as a chiral separation agent.

Cu(II)-Catalyzed Synthesis of 4-(1,4,5,6-Tetrahydropyridin-3-yl)-1,4-dihydroisoquinolin-3-ones from 4-Diazoisoquinolin-3-ones

We report a simple, efficient, and highly selective C-H bond insertion of copper carbenes generated in situ from 4-diazo-1,4-dihydroisoquinolin-3-ones into β-C(sp²)-H bonds of N-sulfonyl enamides, which gave a series of 4-(1,4,5,6-tetrahydropyridin-3-yl)-1,4-dihydroisoquinolin-3(2H)-ones in good to excellent yields. Operationally simple and mild reaction conditions, a cheap catalyst, readily accessible starting materials, and a broad substrate scope are the merits of this reaction.

Bottlebrush Polymers Based on RAFT and the "C1" Polymerization Method: Controlled Synthesis and Application in Anticancer Drug Delivery

In this work, we reported a strategy to synthesize well-defined bottlebrush polymers. Diazoacetate macromonomers of polystyrene (1-PS_n) with controlled molecular weights were prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization. The diazo can tolerate the RAFT polymerization conditions and remained on the chain end of the yielded PS macromonomer. The terminal diazo groups of the macromonomer were polymerized by the allyl PdCl/L catalyst to afford well-defined bottlebrush polymers ((1-PS_n)_ms) carrying a side chain on each backbone atom. Meanwhile, an amphiphilic bottlebrush polymer containing brush-shaped PS and polyethylene glycol (PEG) was synthesized by polymerization of the diazoacetate macromonomer of PEG (2-PEG) using Pd(II)-terminated (1-PS_n)_m as the macroinitiator. The yielded amphiphilic (1-PS₃₀)₅₀-b-(2-PEG)₁₀₀ could self assemble into a well-defined core-shell micelle in aqueous solutions. The hydrodynamic diameter of the micelle was ca. 146 nm and had good biocompatibility. These results indicate the micelles have great potential in drug delivery.

Nickel(II)-catalyzed living polymerization of diazoacetates toward polycarbene homopolymer and polythiophene-block-polycarbene copolymers

Diazoacetate polymerization has attracted considerable research attention because it is an effective approach for fabricating carbon–carbon (C–C) main chain polymers. However, diazoacetate polymerization based on inexpensive catalysts has been a long-standing challenge. Herein, we report a Ni(II) catalyst that can promote the living polymerization of various diazoacetates, yielding well-defined C–C main chain polymers, polycarbenes, with a predictable molecular weight (M_n) and low dispersity (M_w/M_n). Moreover, the Ni(II)-catalyzed sequential living polymerization of thiophene and diazoacetate monomers affords interesting π-conjugated poly(3-hexylthiophene)-block-polycarbene copolymers in high yields with a controlled M_n, variable compositions, and low M_w/M_n, although the structure and polymerization mechanism of the two monomers differ. Using this strategy, amphiphilic block copolymers comprising hydrophobic poly(3-hexylthiophene) and hydrophilic polycarbene blocks are facilely prepared, which were self-assembled into well-defined supramolecular architectures with tunable photoluminescence.

Diazoacetate polymerizations using inexpensive catalysts has been a long-standing challenge to achieve. Here the authors report a Ni(II) catalyst that can promote living polymerization of various diazoacetates, yielding well-defined carbon–carbon main chain polymers, polycarbenes.

C1 Polymerization of Fluorinated Aryl Diazomethanes

A library of fluorinated aryl diazomethanes were polymerized using BF₃·OEt₂ as a catalyst. The polymerization of 2,3,4,5,6-pentafluorophenyl diazomethane was found to be controlled, permitted chain extensions, and facilitated access to a series of block copolymers. Moreover, the polymer chains grew in one carbon increments (so-called "C1 polymerizations") and, as such, afforded highly substituted polymers that featured aryl units pendant to every carbon atom of the backbone. The polymers were characterized using size exclusion chromatography, various spectroscopic techniques, and a series of static and dynamic contact angle measurements. Compared to less-substituted analogues that were prepared using typical C2 polymerization methodologies, the C1 fluorinated polymers were found to be more hydrophobic while maintaining a sufficient solubility to be processed into robust films.

Synthesis and electrochromic properties of polyamines containing a 4,4′-diaminotriphenylamine-N,N′-diyl unit in the polymer backbone: Ru-catalyzed N–H insertion polycondensation of 1,4-phenylenebis(diazoacetate) with 4,4′-diaminotriphenylamine derivatives

Polycondensation of a bis(diazocarbonyl) compound and diaminotriphenylamine derivatization via Ru-catalyzed N–H insertion to afford electroactive polyamine.

A Versatile Method for the End-Functionalization of Polycarbenes

End-functionalization is an effective strategy for constructing functional materials. A method for chain-end functionalization of helical polycarbenes is herein developed that relied on Sonogashira coupling reaction. In this work, a family of helical polycarbenes with controlled molecular mass (M_n ) and low polydispersity (M_w /M_n ) is readily prepared using Pd(II) and the Wei-Phos ligand as initiator. The Pd(II) complex is confirmed to remain at the chain end of polycarbene. Subsequently, a series of terminal alkyne derivatives with interesting functional groups, including the F atom, aldehyde, or anthracene groups, are synthesized. They could be installed at the chain end of polycarbene through Sonogashira coupling reaction catalyzed by the Pd(II) complex at the chain end. Moreover, a couple of hybrid block copolymers are easily obtained by installing terminal alkynes modified by another type of polymer. The structures of the isolated polymers are confirmed by ¹ H nuclear magnetic resonance (¹ H NMR), ¹⁹ F nuclear magnetic resonance (¹⁹ F NMR), ³¹ P nuclear magnetic resonance (³¹ P NMR), and Fourier transform infrared spectroscopy (FT-IR), respectively. The self-assembly properties of the hybrid block copolymers are also investigated by atomic force spectroscopy analysis. By the hereby developed method, various functional groups can be introduced at the chain end of helical polycarbenes for constructing functional polymer materials, moreover, the transition metal residues at the end of polymer chains can be easily removed.

Reactivity of poly(alkoxycarbonylmethylene)s under basic conditions: alkylation of main chain carbon atoms via a ketene silyl acetal-type intermediate and cleavage of the carbon–carbon main chain

We report the alkylation of main chain carbon atoms and cleavage of the carbon–carbon main chain of poly(alkoxycarbonylmethylene)s.

Synthesis of 8-Alkoxy-5H-isochromeno[3,4-c]isoquinolines and 1-Alkoxy-4-arylisoquinolin-3-ols through Rh(III)-Catalyzed C-H Functionalization of Benzimidates with 4-Diazoisochroman-3-imines and 4-Diazoisoquinolin-3-ones

Rh(III)-catalyzed C-H activation/annulation of benzimidates with 4-diazoisochroman-3-imines furnished 8-alkoxy-5H-isochromeno[3,4-c]isoquinolines in moderate to excellent yields with a broad range of substrate scope. The reaction was carried out under mild reaction conditions and could be scaled up with practical usage. Similar reaction between benzimidates and 4-diazoisoquinolin-3-ones provided 1-alkoxy-4-arylisoquinolin-3-ols in excellent yields. Moreover, the synthesized products could be conveniently transformed to the corresponding heterocycles with a 1,8-naphthyridinone or isochromenopyridinone core, which are privileged structures in medicinal chemistry.

Single-Component Polycondensation of Bis(alkoxycarbonyldiazomethyl)aromatic Compounds To Afford Poly(arylene vinylene)s with an Alkoxycarbonyl Group on Each Vinylene Carbon Atom

The original synthetic strategy for a new type of poly(arylene vinylene) (PAV) is presented, where the C=C-bond-forming coupling of bis(alkoxycarbonyldiazomethyl)aromatic compounds is utilized as propagation. The strategy is unique in that the resulting PAVs have an alkoxycarbonyl group as an electron-withdrawing substituent on each vinylene carbon atom in the polymer main chain. Among the transition-metal catalysts examined in this study, RuCl(cod)Cp* (cod = 1,5-cyclooctadiene, Cp* = pentamethylcyclopentadienyl) is the most efficient, affording PAVs from a series of bis(alkoxycarbonyldiazomethyl)aromatic compounds with a high trans-C=C-forming selectivity of up to 90%. A PAV sample with a fluorenylene framework as an arylene moiety prepared by the Ru catalyst exhibited a hole mobility of 4 × 10^-6 cm² V^-1 s^-1.

Effects of solvents, additives, and π-allyl ligand structures on the polymerization behavior of diazoacetates initiated by π-allylPd complexes

We have revealed that the quality of control of the polymerization was improved by adding some compounds and polymer tacticity was dependent on the structures of π-allyl ligands.