An overview of anion coordination by hydroxyl, amine and amide based rigid and symmetric neutral dipodal receptors

Chemoselective Electrochemical Cleavage of Sulfonimides as a Direct Way to Sulfonamides

A new method for selective cleavage of sulfonimides into sulfonamides in high yields using a simple electrochemical approach is shown. As revealed by the electrochemical study, the aromatic sulfonimides can be selectively cleaved by electrolysis of the starting compound at a given potential (only -0.9 V vs SCE for the nosyl group). The high chemoselectivity was confirmed by preparative electrolysis, and the results were supported with DFT calculations of a set of substances bearing different sulfonimide functions. Moreover, various experimental setups together with other attempts to simplify the procedure were tested. Finally, the removal of the p-nosyl group from the corresponding sulfonimides proceeds smoothly regardless of the number of nosyl groups and the overall shape of the complex molecule. Thus, the method is interesting for use in the field of multifunctional molecules such as calix[n]arenes.

Highly soluble bisurea derivatives for anion recognition

Highly soluble bisurea derivatives having 1,2-phenoxyethane (receptors 2) and 1,2-ethoxyethane (3) moieties as spacer groups were designed and prepared based on previously reported receptors with the 2,2'-binaphthyl group as a spacer (1). The receptors can be prepared in fewer steps from commercially available starting materials. The solubilities and anion recognition abilities were evaluated by UV-vis and NMR spectral methods. Receptors 2 and 3 bearing a flexible linker showed good solubilities in common organic solvents such as CHCl₃, MeCN, 2-butanone, toluene, and THF. Although the anion recognition abilities of receptors 2 and 3 were lower than those of receptors 1, the greatly improved solubilities of receptors 2 and 3 allow the association of anions under more concentrated conditions for the solubilisation of salts such as lithium chloride in organic solvents.

Fluorescence Sensing of Anions by Silanediols Bearing Substituted Naphthyl Groups

Silanediols bearing naphthyl moieties substituted at 5-position with an electron-withdrawing cyano group and an electron-donating N,N-dimethylamino group, respectively, have been prepared and characterized. The substituents on the naphthyl moieties strongly influence the reactivity, photophysical properties, and sensing abilities for anions. The silanediol bearing 1-(5-N,N-dimethylaminonaphthyl) groups exhibited large Stokes shifts based on intramolecular charge transfer and large quantum yields in organic solvents. The silanediol showed favorable ratiometric fluorescence responses of upon the addition of biologically important anions, AcO^- and H₂ PO₄ ^- with the association constants of 4.08×10⁴ and 8.76×10³  mol^-1  dm³ , respectively.

Protonophoric and mitochondrial uncoupling activity of aryl-carbamate substituted fatty acids

Aryl-urea substituted fatty acids are protonophores and mitochondrial uncouplers that utilise a urea-based synthetic anion transport moiety to carry out the protonophoric cycle. Herein we show that replacement of the urea group with carbamate, a functional group not previously reported to possess anion transport activity, produces analogues that retain the activity of their urea counterparts. Thus, the aryl-carbamate substituted fatty acids uncouple oxidative phosphorylation and inhibit ATP production by collapsing the mitochondrial proton gradient. Proton transport proceeds via self-assembly of the deprotonated aryl-carbamates into membrane permeable dimeric species, formed by intermolecular binding of the carboxylate group to the carbamate moiety. These results highlight the anion transport capacity of the carbamate functional group.

Dynamic Covalent Self-Assembly of Chloride- and Ion-Pair-Templated Cryptates

While supramolecular hosts capable of binding and transporting anions and ion pairs are now widely available, self‐assembled architectures are still rare, even though they offer an inherent mechanism for the release of the guest ion(s). In this work, we report the dynamic covalent self‐assembly of tripodal, urea‐based anion cryptates that are held together by two orthoester bridgeheads. These hosts exhibit affinity for anions such as Cl⁻, Br⁻ or I⁻ in the moderate range that is typically advantageous for applications in membrane transport. In unprecedented experiments, we were able to dissociate the Cs⋅Cl ion pair by simultaneously assembling suitably sized orthoester hosts around the Cs⁺ and the Cl⁻ ion.

Analyte Interactions with Oxoporphyrinogen Derivatives: Computational Aspects

Abstract:

The binding of anions by highly-coloured chromophore compounds is of interest from the point-of-view of the development of optical sensors for analyte species. In this review, we have summarised our work on the interactions between oxoporphyrinogen type host compounds and different analyte species using computational methods. The origin of our interest in sensing using oxoporphyrinogens stems from an initial finding involving anion-host interactions involving a conjugated oxoporphyrinogen molecule. This review starts from that point, introducing some additional exemplary anion binding data, which is then elaborated to include descriptions of our synthesis work towards multitopic and ion pair interactions. In all the projects, we have consulted computational data on host structure and host-guest complexes in order to obtain information about the interactions occurring during complexation. Density functional theory and molecular dynamics simulations have been extensively used for these purposes. Oxoporphyrinogens are highly colored synthetically flexible compounds whose interactions with anions, ion pairs, and other species have been modelled using computational methods.

Transformation of the coordination nanostructures of 4,4',4''-(1,3,5-triazine-2,4,6-triyl) tribenzoic acid molecules on HOPG triggered by the change in the concentration of metal ions

The modulation effects of Cu2+/Fe3+ ions on the hydrogen-bonded structure of 4,4',4''-(1,3,5-triazine-2,4,6-triyl) tribenzoic acid (TATB) on a HOPG surface have been investigated at the liquid-solid interface by scanning tunneling microscopy (STM). STM observations directly demonstrated that the self-assembled honeycomb network of TATB has been dramatically transformed after introducing CuCl2/FeCl3 with different concentrations. The metal-organic coordination structures are formed due to the incorporation of the Cu2+/Fe3+ ions. Interestingly, a Cu2+ ion remains coordinated to two COOH groups and only the number of COOH groups involved in coordination doubles when the concentration of Cu2+ ions doubled. A Fe3+ ion changes from coordination to three COOH groups to two COOH groups after increasing the concentration of Fe3+ ions in a mixed solution. Such results suggest that the self-assembled structures of TATB molecules formed by metal-ligand coordination bonds can be effectively adjusted by regulating the concentration of metal ions in a mixed solution, which has rarely been reported before. It explains that the regulatory effect of concentration leads to the diversity of molecular architectures dominated by coordination bonds.

Anion Recognition by a Pincer-Type Host Constructed from Two Polyamide Macrocyclic Frameworks Jointed by a Photo-Addressable Azobenzene Switch

A sterically crowded light-responsive host 1 was synthetized with a 93% yield by applying a post-functionalization protocol utilizing the double amidation of 4,4'-azodibenzoyl dichloride with a readily available 26-membered macrocyclic amine. X-ray structures of two hydrates of trans-1 demonstrate a very different alignment of the azobenzene linkage, which is involved in T-shape or parallel-displaced π⋯π stacking interactions with the pyridine-2,6-dicarboxamide moieties from the macrocyclic backbone. Despite the rigidity of the macrocyclic framework, which generates a large steric hindrance around the azobenzene chromophore, the host 1 retains the ability to undergo a reversible cis⟷trans isomerization upon irradiation with UVA (368 nm) and blue (410 nm) light. Moreover, thermal cis→trans back-isomerization (ΔG0 = 106.5 kJ∙mol-1, t½ = 141 h) is markedly slowed down as compared to the non-macrocyclic analog. 1H NMR titration experiments in DMSO-d6/0.5% water solution reveal that trans-1 exhibits a strong preference for dihydrogenphosphate (H2PO4-) over other anions (Cl-, MeCO2-, and PhCO2-), whereas the photogenerated metastable cis-1 shows lower affinity for the H2PO4- anion.

Colorimetric fluoride detection in dimethyl sulfoxide using a heteroleptic ruthenium(ii) complex with amino and amide groups: X-ray crystallographic and spectroscopic analyses

A bis-heteroleptic ruthenium(ii) complex, [Ru(Hdpa)₂(H₂pia)]X₂ (1·X₂; X = Cl, OTf, or F; Hdpa = di-2-pyridylamine; H₂pia = 2-pycolinamide; OTf⁻ = CF₃SO₃⁻), was synthesized and spectroscopically and crystallographically characterized. The crystal structures of 1·Cl₂·2.5H₂O and 1·F₂·2EtOH revealed essentially identical geometries for the 1²⁺ dication; however, the dihedral angle between the two pyridyl groups in the Hdpa ligands, which represented the degree of bending of the bent conformation, was affected by hydrogen-bonding interactions between the NH group and counterions. In 1·F₂·2EtOH, one of the Hdpa ligands had an unusually smaller dihedral angle (15.8°) than the others (29.9°–35.0°). The two NH groups of each Hdpa ligand and the NH₂ group of the H₂pia ligand in 1²⁺ acted as receptors for F⁻ anion recognition via hydrogen-bonding interactions in a dimethyl sulfoxide (DMSO) solution, and the reaction showed an unambiguous color change in the visible region. Upon the addition of tetra-n-butylammonium fluoride to the red DMSO solution of 1·(OTf)₂·H₂O, the solution turned dark brown. ¹H NMR analysis and absorption spectroscopy of the reaction between 1²⁺ and the added F⁻ anions revealed that the F⁻ anions did not distinguish between the two amino groups of Hdpa and the amide group of H₂pia, although they were in different environments in the DMSO solution. A tris-F-adduct with 1²⁺, 1·F₃⁻, was formed when sufficient F⁻ anions were present in the solution, despite the presence of four NH protons in 1²⁺. Time-dependent DFT calculations of 1²⁺ and 1·F₃⁻ were consistent with their absorption spectra.

A bis-heteroleptic ruthenium(ii) complex; [Ru(Hdpa)₂(H₂pia)]X₂ (1·X₂; X = Cl, OTf, or F; Hdpa = di-2-pyridylamine; H₂pia = 2-pycolinamide; OTf^– = CF₃SO₃^–) was synthesized and spectroscopically and crystallographically characterized.

Imidazopyridine–fluoride interaction: solvent-switched AIE effects via S⋯O conformational locking

Imidazopyridine-based carboxamide exhibiting the aggregation-induced emission phenomenon works effectively in fluoride ion detection through H-bond interaction and subsequent deprotonation.

semiaza-‎Bambusurils are ‎Anion-Specific ‎Transmembrane Transporters ‎

semiaza-Bambus[6]urils efficiently transport anions across lipid ‎membranes. A systematic modification of their lipophilic side ‎chains to include various alkyl groups and thioethers reveal that ‎the most efficient chloride transporters are...

Chromogenic Properties of p-Pyridinium- and p-Viologen-Calixarenes and Their Cation-Sensing Abilities

The synthesis of calix[4]- and -[6]arene derivatives P6(H)₂²⁺·(Cl^–)₂, V4(H)₂⁴⁺·(Cl^–)₂·(I^–)₂, and V6(H)₂⁴⁺·(Cl^–)₂·(I^–)₂ bearing N-linked pyridinium (P) and viologen (V) units at the upper rim is described here. A rare example of an anionic conformational template is reported for p-pyridiniumcalix[6]arene P6(H)₂²⁺, which adopts a 1,3,5-alternate conformation in the presence of chloride anions. Derivatives P6(H)₂²⁺·(Cl^–)₂, V6(H)₂⁴⁺·(Cl^–)₂·(I^–)₂, and V4(H)₂⁴⁺·(Cl^–)₂·(I^–)₂ show a negative solvatochromism, while their UV–vis acid–base titration evidenced that upon addition of a base, new bands appear at 487, 583, and 686 nm, respectively, due to the formation of betainic monodeprotonated species P6(H)₁⁺, V6(H)₁³⁺, and V4(H)₁³⁺. These new bands were attributable to the intramolecular charge-transfer (CT) transition from the phenoxide to the pyridinium or viologen moiety and were responsive to the presence of cations. In fact, the band at 487 nm of P6(H)₁⁺ was quenched in the presence of a hard Li⁺ cation, and the color of its acetonitrile solution was changed from pink to colorless upon addition of LiI. Consequently, this derivative can be considered as a useful host for the recognition and sensing of lithium cations.

Synthesis of pyrrolyl-BODIPY dyes through regioselective SN Ar reactions and application as a fluorescent sensor for fluoride anion

Two pyrrolyl-BODIPY dyes with 3,5-di-[Formula: see text]-butyl-4-hydroxyphenyl group were synthesized through stepwise S[Formula: see text]Ar reactions of 3,5-dibromoBODIPYs, which were used as a fluorescent sensor for basic anions. The intermediate pyrrolyl-BODIPYs 2a–2b were regioselectively synthesized through an efficient S[Formula: see text]Ar reaction between 3,5-dibromoBODIPY 1a and pyrroles. The target pyrrolyl-BODIPYs 3a–3b with a 3,5-di-[Formula: see text]-butyl-4-hydroxyphenyl group at 3-position and a pyrrole substituent at 5-position were obtained through a second S[Formula: see text]Ar reaction between pyrrolyl-BODIPYs 2a–2b and high steric hindrance 2,6-dibutylphenol in 90% and 88% yields, respectively. In contrast, the reaction between pyrrolyl-BODIPYs 2a–2b and phenol gave pyrrolyl-BODIPYs 3c–3d with phenoxy substituent at 3-position. These pyrrolyl-BODIPYs 3a–2d show strong, sharp absorptions (551–604 nm) and emissions (564–634 nm) with high fluorescence quantum yields up to 0.86 in dichloromethane. Importantly, the 3,5-di-[Formula: see text]-butyl-4-hydroxyphenyl group of pyrrolyl-BODIPY 3a showed a turn-off fluorescent response toward fluoride anion.

1,2-Phenylene-Incorporated Smallest Expanded Calix[4]pyrrole via One-Step Synthesis of Tetrapyrrane: A Fluorescent Host for Fluoride Ion

Synthesis of tetrapyrrane 8 from acetone and pyrrole via one-step condensation was achieved for the first time along with a much-improved yield of the tripyrrane 9. Diborylation of the tetrapyrrane and subsequent "1 + 1" cyclocoupling with 1,2-diiodobenzene following the Suzuki protocol generated novel o-phenylene incorporated macrocycle belonging to the smallest meso-expanded calix[4]pyrrole family. The latter macrocycle displays exclusive turn-on fluorescence sensing of fluoride ion upon complexation via a unique partial cone conformation supported by DFT analysis in acetonitrile solvent.

Exploring cyclohexane/piperazine-urea motifs for spherical halide (X = Cl−/Br−) recognition: effects on anion coordination, photoluminescence, and morphological tunability

Two bis-urea receptors bearing aromatic meta-substituted electron-withdrawing groups demonstrated  halide-coordination-triggered self-assemblies with contrasting coordination numbers and variation in morphology.

Fe-mediated synthesis of N-aryl amides from nitroarenes and acyl chlorides

Amides are prevalent in nature and valuable functional compounds in agrochemical, pharmaceutical, and materials industries. In this work, we developed a selective and mild method for the synthesis of N-aryl amides. Starting from commercially available nitroarenes and acyl halides, N-aryl amides with good yields can be obtained in water. Especially in the process of transformation, Fe dust is the only reductant and additive, and the reaction can be easily performed on a large scale.

Amides are prevalent in nature and valuable functional compounds in agrochemical, pharmaceutical, and materials industries.