Tuning photoactive metal–organic frameworks for luminescence and photocatalytic applications

Ligand-triggered antenna effect and dual emissions in Eu(III) MOF and its application in multi-mode sensing of 1,4-dioxane

A new set of metal-organic frameworks was designed by functionalizing g-C3N4 with benzoic acid and using them as structure-directing ligands during the metal-organic framework (MOF) formation. One such MOF exhibited dual emissions, both metal- and ligand-centered, enabling ratiometric sensing of the carcinogenic industrial solvent dioxane. The fabricated MOFs possessed a unique fluffy spherical morphology that enabled atomic level resolution in transmission electron microscopy-a rarity in MOFs due to the 'Knock-on' effect. Sensor experiments showed a rapid response within 5 s of analyte introduction and achieved a low limit of detection (LOD) of 0.026 ppm, well below the FDA-approved level of 10 ppm. In addition, the sensor exhibited exceptional selectivity, discriminating 1,4-dioxane from a pool of 16 solvents. This increased sensing capability was attributed to the formation of complexes and precise alignment of energy levels between the host and analyte, facilitating photoinduced electron transfer (PET). This material is equally efficient for colorimetric detection of the same solvent under excitation of UV light as well as gas phase detection of this volatile organic compound through I-V characteristics. Density functional theory (DFT) analysis supported the crucial role of Eu and the ligand system in efficiently detecting 1,4-dioxane by fluorescence spectroscopy, as shown in the energy level diagram. Future research could focus on optimizing these metal-organic frameworks for enhanced industrial applications in the detection of dioxane and exploring their potential applications in real-world environmental monitoring and public health safety.

Nano-Metal-Organic Frameworks and Nano-Covalent-Organic Frameworks: Controllable Synthesis and Applications

Nanoscale framework materials have attracted extensive attention due to their diverse morphology and good properties, and synthesis methods of different size structures have been reported. Therefore, the relationship between different sizes and performance has become a research hotspot. This paper reviews the controllable synthesis strategies of nano-metal-organic frameworks (nano-MOFs) and nano-covalent-organic frameworks (nano-COFs). Firstly, the synthetic evolution of nano-frame materials is summarized. Due to their special surface area, regular pores and adjustable structural functions, nano-frame materials have attracted much attention. Then the preparation methods of nanostructures with different dimensions are introduced. These synthetic strategies provide the basis for the design of novel energy storage and catalytic materials. In addition, the latest advances in the field of energy storage and catalysis are reviewed, with emphasis on the application of nano-MOFs/COFs in zinc-, lithium-, and sodium-based batteries, as well as supercapacitors.

Critical trigger of self-assembled bimetallic Fe/Mn-MOF with SnS2 heterojunctions by persulfate activation for efficient tetracyclines photodegradation

Developing advanced strategies, including exposing active site centers, regulating coordination environments, controlling crystallographic facets, optimizing electronic structures and constructing defects for enhancing photocatalytic performance is of great significance to improving the ecosystem. In this study, a novel self-assembled bimetallic Fe/Mn-MOF with SnS2 Z-scheme heterojunction photocatalyst was designed using a facile multistep solvothermal method. Benefiting from the interfacial heterojunction synergistic effect, the photocatalysts exhibited an outstanding catalytic performance. Nearly 91.4% efficiency of tetracyclines was degraded within 80 min through the assistance of a persulfate-based advanced oxidation process. DFT calculations utilizing the Fukui index identified the sites vulnerable to attack by the active species. As demonstrated by the trapping experiments and electron spin resonance (ESR), the involved oxygen-active species (•O2- and 1O2) facilitated the rapid degradation of tetracycline. The degradation pathways were further guided in the elucidation of the rationale mechanism and the toxicity of derived intermediates was revealed. This work opens a new strategy for the rational design of bimetallic photocatalysts, emphasizing interface-modulated heterojunctions for efficient solar energy conversion.

Influence of Humidity on Layer-by-Layer Growth and Structure in Coordination Networks

Metal-organic frameworks (MOFs) are promising materials because of their high designability of pores and functionalities. Especially, MOF thin films and their properties have been investigated toward applications in nanodevices. Typically, MOF thin films are fabricated by using a bottom-up method such as layer-by-layer (LbL) growth in air. Because the water molecules can coordinate and be replaced with organic linkers during synthesis, humidity conditions will be expected to influence the LbL growth processes. In this study, we fabricated MOF thin films composed of Zn2+, tetrakis-(4-carboxyphenyl)-porphyrin (TCPP), and 4,4'-bipyridyl (bpy) at 10 and 40% relative humidity (RH) conditions. Then, we investigated the humidity effects on chemical compositions of TCPP and bpy, periodic structure, orientation, and surface morphology. At high RH, coordination replacement of water with the organic linkers becomes more competitive than that at low RH, resulting in a different TCPP/bpy composition ratio between the two RH conditions. Also, more frequent coordination replacements of water with the organic linkers at high RH led to the formation of phases other than that observed at low RH, loss of growth orientation, and rough surface. The findings clarified the importance of controlling the RH condition during LbL growth to obtain the desired coordination networks.

Manipulation of interfacial charge dynamics for metal-organic frameworks toward advanced photocatalytic applications

Compared to other known materials, metal-organic frameworks (MOFs) have the highest surface area and the lowest densities; as a result, MOFs are advantageous in numerous technological applications, especially in the area of photocatalysis. Photocatalysis shows tantalizing potential to fulfill global energy demands, reduce greenhouse effects, and resolve environmental contamination problems. To exploit highly active photocatalysts, it is important to determine the fate of photoexcited charge carriers and identify the most decisive charge transfer pathway. Methods to modulate charge dynamics and manipulate carrier behaviors may pave a new avenue for the intelligent design of MOF-based photocatalysts for widespread applications. By summarizing the recent developments in the modulation of interfacial charge dynamics for MOF-based photocatalysts, this minireview can deliver inspiring insights to help researchers harness the merits of MOFs and create versatile photocatalytic systems.

Theoretical Investigation of Delafossite-Cu2ZnSnO4 as a Promising Photovoltaic Absorber

In the quest for efficient and cost-effective photovoltaic absorber materials beyond silicon, considerable attention has been directed toward exploring alternatives. One such material, zincblende-derived Cu2ZnSnS4 (CZTS), has shown promise due to its ideal band gap size and high absorption coefficient. However, challenges such as structural defects and secondary phase formation have hindered its development. In this study, we examine the potential of another compound, Cu2ZnSnO4 (CZTO), with a similar composition to CZTS as a promising alternative. Employing ab initio density function theory (DFT) calculations in combination with an evolutionary structure prediction algorithm, we identify that the crystalline phase of delafossite structure is the most stable among the 900 (meta)stable CZTO. Its thermodynamic stability at room temperature is also confirmed by the molecular dynamics study. Excitingly, this new phase of CZTO displays a direct band gap where the dipole-allowed transition occurs, making it a strong candidate for efficient light absorptions. Furthermore, the estimation of spectroscopic limited maximum efficiency (SLME) directly demonstrates the high potential of delafossite-CZTO as a photovoltaic absorber. Our numerical results suggest that delafossite-CZTO holds promise for future photovoltaic applications.

A review of metal-organic framework (MOF) materials as an effective photocatalyst for degradation of organic pollutants

Water plays a vital role in all aspects of life. Recently, water pollution has increased exponentially due to various organic and inorganic pollutants. Organic pollutants are hard to degrade; therefore, cost-effective and sustainable approaches are needed to degrade these pollutants. Organic dyes are the major source of organic pollutants from coloring industries. The photoactive metal-organic frameworks (MOFs) offer an ultimate strategy for constructing photocatalysts to degrade pollutants present in wastewater. Therefore, tuning the metal ions/clusters and organic ligands for the better photocatalytic activity of MOFs is a tremendous approach for wastewater treatment. This review comprehensively reports various MOFs and their composites, especially POM-based MOF composites, for the enhanced photocatalytic degradation of organic pollutants in the aqueous phase. A brief discussion on various theoretical aspects such as density functional theory (DFT) and machine learning (ML) related to MOF and MOF composite-based photocatalysts has been presented. Thus, this article may eventually pave the way for applying different structural features to modulate novel porous materials for enhanced photodegradation properties toward organic pollutants.

Exploring Differences in Lanthanide Excited State Reactivity Using a Simple Example: The Photophysics of La and Ce Thenoyltrifluoroacetone Complexes

A series of four lanthanide thenoyltrifluoroacetone (TTA) complexes consisting of two f0 (La3+ and Ce4+) and two f1 (Ce3+) complexes was examined using steady-state and time-resolved spectroscopic techniques. The wide range of spectroscopic techniques presented herein have enabled us to discern the nature of the excited states (charge transfer, CT vs ligand localized, LL) as well as construct a Jablonski diagram for detailing the excited state reactivity within the series of molecules. The wavelength and excitation power dependence for these series of complexes are the first direct verification for the presence of simultaneous competing, noninteracting CT and LL excited states. Additionally, a computational framework is described that can be used to support spectroscopic assignments as a guide for future studies. Finally, the relationship between the obtained photophysics and possible photochemical separation mechanisms is described.

Three-Dimensional Neodymium Metal-Organic Framework for Catalyzing the Cyanosilylation of Aldehyde and the Synthesis of 2,3-Dihydroquinazolin-4(1H)-one Derivatives

In this work, a novel 3D lanthanide metal-organic framework (Ln-MOF) Nd-cdip (H₄cdip = 5,5'-carbonyldiisophthalic acid) was successfully synthesized, which could be used as an efficient heterogeneous catalyst for cyanosilylation and the synthesis of 2,3-dihydroquinazolin-4(1H)-one derivatives at room temperature based on the Lewis acid sites in the channels of the MOF. Moreover, Nd-cdip had an excellent turnover number (500) for catalyzing cyanosilylation in no solvent condition. Nd-cdip could be reused in both of the above-mentioned reactions at least five times without a significant decrease in yield. The possible mechanism of cyanosilylation catalyzed by Nd-cdip was studied by using the luminescence properties of Tb-cdip, which has the same structure and functions as Nd-cdip. Furthermore, both reactions catalyzed by Nd-cdip were fitted to zero-order dynamics.

Multifunctional Cd-CP for fluorescence sensing of Cr(VI), MnO4-, acetylacetone and ascorbic acid in aqueous solutions

The development of multifunctional fluorescent chemosensors for the detection of multiple targets remains challenging but of great importance. In this paper, one novel coordination polymer (CP), denoted as [Cd₂(edda)(phen)₂]∙H₂O (compound 1, H₄edda = 5,5' (ethane-1,2-diylbis(oxy)) diisophthalic acid, phen = 1,10-phenanthroline) is successfully designed and prepared under hydrothermal conditions. Structural analysis indicates that compound 1 possesses a one-dimensional (1D) double chain structure, then self-assembles into a three-dimensional (3D) supramolecular framework via π…π interactions between phen molecules. Interestingly, compound 1 is found to be tolerant in wide range of acidic to alkaline aqueous solutions (pH = 2-13). Fluorescent spectral investigations reveal that compound 1 exhibits highly selective and sensitive fluorescence responses toward MnO₄^-, Cr(VI) ions, acetylacetone (acac) and ascorbic acid (AA) by fluorescence quenching in the aqueous phase. The detection limits are in the very low range, reaching μM level for the detection of MnO₄^-, Cr(VI) ions, nM for AA and ppm for acac detection. The distinguished multi-responsive performance suggests compound 1 to be a potential multifunctional probe. Furthermore, the possible quenching mechanisms have also been systematically investigated in this work.

Unveiling Structural Diversity of Uranyl Compounds of Aprotic 4,4'-Bipyridine N,N'-Dioxide Bearing O-Donors

As an aprotic O-donor ligand, 4,4'-bipyridine N,N'-dioxide (DPO) shows good potential for the preparation of uranyl coordination compounds. In this work, by regulating reactant compositions and synthesis conditions, diverse coordination assembly between uranyl and DPO under different reaction conditions was achieved in the presence of other coexisting O-donors. A total of ten uranyl-DPO compounds, U-DPO-1 to U-DPO-10, have been synthesized by evaporation or hydro/solvothermal treatment, and the possible competition and cooperation of DPO with other O-donors for the formation of these uranyl-DPO compounds are discussed. Starting with an aqueous solution of uranyl nitrate, it is found that an anionic nitrate or hydroxyl group is involved in the coordination sphere of uranyl in U-DPO-1 ((UO₂)(NO₃)₂(H₂O)₂·(DPO)), U-DPO-2 ((UO₂)(NO₃)₂(DPO)), and U-DPO-3 ((UO₂)(DPO)(μ₂-OH)₂), where DPO takes three different kinds of coordination modes, i.e. uncoordinated, monodentate, and biconnected. The utilization of UO₂(CF₃SO₃)₂ in acetonitrile, instead of an aqueous solution of uranyl nitrate, precludes the participation of nitrate and hydroxyl, and ensures the engagement of DPO ligands (4-5 DPO ligands for each uranyl) in a uranyl coordination sphere of U-DPO-4 ([(UO₂)(CF₃SO₃)(DPO)₂](CF₃SO₃)), U-DPO-5 ([UO₂(H₂O)(DPO)₂](CF₃SO₃)₂) and U-DPO-6 ([(UO₂)(DPO)_2.5](CF₃SO₃)₂). Moreover, when combined with anionic carboxylate ligands, terephthalic acid (H₂TPA), isophthalic acid (H₂IPA), and succinic acid (H₂SA), DPO works well with them to produce four mixed-ligand uranyl compounds with similar structures of two-dimensional (2D) networks or three-dimensional (3D) frameworks, U-DPO-7 ((UO₂)(TPA)(DPO)), U-DPO-8 ((UO₂)₂(DPO)(IPA)₂·0.5H₂O), U-DPO-9 ((UO₂)(SA)(DPO)·H₂O), and U-DPO-10 ((UO₂)₂(μ₂-OH)(SA)_1.5(DPO)). Density functional theory (DFT) calculations conducted to probe the bonding features between uranyl ions and different O-donor ligands show that the bonding ability of DPO is better than that of anionic CF₃SO₃ ^-, nitrate, and a neutral H₂O molecule and comparable to that of an anionic carboxylate group. Characterization of physicochemical properties of U-DPO-7 and U-DPO-10 with high phase purity including infrared (IR) spectroscopy, thermogravimetric analysis (TGA), and luminescence properties is also provided.

Two Co-Based Metal-Organic Framework Isomers with Similar Metal-Carboxylate Sheets: Turn-On Ratiometric Luminescence Sensing Activities toward Biomarker N-Acetylneuraminic Acid and Discrimination of Ga3+ and In3

Two supramolecular Co-MOF isomers, namely, {[Co(L)_0.5(m-bimb)]·3H₂O}_n (LCU-115) and {[Co(L)_0.5(p-bimb)]·3H₂O}_n (LCU-116), were synthesized from an amide-containing carboxylic acid N,N″-(3,5-dicarboxylphenyl)benzene-1,4-dicarboxamide (H₄L) and two flexible positional isostructural N-containing ligands m-bimb and p-bimb (m-bimb = 1,3-bis((1H-imidazol-1-yl)methyl)benzene; p-bimb = 1,4-bis((1H-imidazol-1-yl)methyl)benzene). The carboxylate ligands connect Co(II) centers to form 2D metal-carboxylate sheets, which are extended further by m-bimb and p-bimb to form a 2D bilayer with parallel stacking (LCU-115) and a 3D framework (LCU-116), respectively. Luminescence measurements indicated that these two complexes exhibited interesting multiresponsive sensing activities toward pH, biomarker N-acetylneuraminic acid, and trivalent cations Ga³⁺/In³⁺. They show highly sensitive turn-on fluorescence responses in the acidic range and can also be regarded as on-off-on vapoluminescent sensors to typical acidic and basic gases HCl and Et₃N. It is worth noting that these complexes have excellent turn-on ratiometric fluorescence sensing ability for N-acetylneuraminic acid (NANA) with detection limits as low as 7.39 and 8.06 μM, respectively. Furthermore, they were successfully applied for the detection of NANA in simulated urine and serum samples with satisfactory results. For ion detection, LCU-116 could detect both Ga³⁺ and In³⁺, while LCU-115 could distinguish Ga³⁺ from In³⁺ with the latter showing luminescence quenching. The sensing mechanism was investigated in detail by XRD, UV-vis, EDS, XPS, SEM, and TEM. The results of interday and intraday precision studies gave low RSD values in the range of 1.19-3.53%, ascertaining the reproducibility of these sensors. The recoveries for the sensing analytes in simulated urine/serum or real water are satisfactory from 96.7 to 103.3% (toward NANA) and 96.6 to 115.0% (toward Ga³⁺ and In³⁺), indicating that these two complexes also possess acceptable reliability for monitoring in real samples. The results indicated that the supramolecular isomers LCU-115 and LCU-116 are promising material candidates for application in biological and environmental monitoring.

A water-stable dual-responsive Cd-CP for fluorometric recognition of hypochlorite and acetylacetone in aqueous media

One novel cadmium(II)-coordination polymer [Cd₃L₂(datrz)(H₂O)₃] (CP 1) is controllably synthesized by surmising the astute combination of semi-rigid tricarboxylate acid 4-(2',3'-dicarboxylphenoxy) benzoic acid (H₃L) and auxiliary ligand 3,5-diamino-1,2,4-triazole (datrz). Structure analysis shows that CP 1 has a two-dimensional (2D) layer structure with a 5-nodal (4³) (4⁴·6²) (4⁵·6⁴·8) (4⁵·6) (4⁷·6⁶·8²) topology. Further investigations reveal that CP 1 shows superordinary water stability and good thermal stability. The fluorescent explorations suggest that the as-synthesized CP 1 could emit blue light centered at 485 nm, attributing to ligand-based emission. In terms of sensing investigations, CP 1 could act as a fluorescent sensor for detecting hypochlorite (ClO^-) and acetylacetone (acac) through fluorescence turn-off process in aqueous solution, and the detection limit could reach 0.18 μM and 0.056 μM, respectively. Further research reveals that it is more likely the N-H···O-Cl hydrogen bonds between -NH₂ groups of the triazole ligands and O atoms of ClO^- plays the key role in the system, which may serve as a bridge for the energy transfer, leading to fluorescence quenching of the chemosensor. While the photoinduced electron transfer (PET) combined with inner filter effect (IFT) should be responsible for the turn-off fluorescence of CP 1 triggered by acac.

Rational Construction of Metal Organic Framework Hybrid Assemblies for Visible Light-Driven CO2 Conversion

Photocatalytic reduction of CO₂ to value-added chemicals is known to be a promising approach for CO₂ conversion. The design and preparation of ideal photocatalysts for CO₂ conversion are of pivotal significance for the sustainable development of the whole society. In this work, we integrated two functional organic linkers to prepare a novel metal organic framework (MOF) photocatalyst {[Co(9,10-bis(4-pyridyl)anthracene)_0.5(bpda)]·4DMF} (Co-MOF). The existence of anthryl and amino groups leads to a wide range of visible light absorption and efficient separation of photogenerated electrons. To extend the lifetime of photogenerated electrons in the photocatalytic system, we modified Co-MOF particles onto g-C₃N₄. As expected, Co-MOF/g-C₃N₄ composites exhibited an ultrahigh selectivity (more than 97%) in the photocatalytic process, and the highest CO production rate (1824 μmol/g/h) was 7.1 and 27.2 times of Co-MOFs and g-C₃N₄, respectively. What's more, we also discussed the reaction mechanism of the Co-MOF/g-C₃N₄ photocatalytic CO₂ reduction, and this work paves the pathway for designing photocatalysts with ideal CO₂ reduction performance.

Metal-Organic Framework-Based Photocatalysis for Solar Fuel Production

Metal-organic frameworks (MOFs) represent a novel class of crystalline inorganic-organic hybrid materials with tunable semiconducting behavior. MOFs have potential for application in photocatalysis to produce sustainable solar fuels, owing to their unique structural advantages (such as clarity and modifiability) that can facilitate a deeper understanding of the structure-activity relationship in photocatalysis. This review takes the photocatalytic active sites as a particular perspective, summarizing the progress of MOF-based photocatalysis for solar fuel production; mainly including three categories of solar-chemical conversions, photocatalytic water splitting to hydrogen fuel, photocatalytic carbon dioxide reduction to hydrocarbon fuels, and photocatalytic nitrogen fixation to high-energy fuel carriers such as ammonia. This review focuses on the types of active sites in MOF-based photocatalysts and discusses their enhanced activity based on the well-defined structure of MOFs, offering deep insights into MOF-based photocatalysis.

Metal-Organic Frameworks as Photocatalysts for Solar-Driven Overall Water Splitting

Metal-organic frameworks (MOFs) have been frequently used as photocatalysts for the hydrogen evolution reaction (HER) using sacrificial agents with UV-vis or visible light irradiation. The aim of the present review is to summarize the use of MOFs as solar-driven photocatalysts targeting to overcome the current efficiency limitations in overall water splitting (OWS). Initially, the fundamentals of the photocatalytic OWS under solar irradiation are presented. Then, the different strategies that can be implemented on MOFs to adapt them for solar photocatalysis for OWS are discussed in detail. Later, the most active MOFs reported until now for the solar-driven HER and/or oxygen evolution reaction (OER) are critically commented. These studies are taken as precedents for the discussion of the existing studies on the use of MOFs as photocatalysts for the OWS under visible or sunlight irradiation. The requirements to be met to use MOFs at large scale for the solar-driven OWS are also discussed. The last section of this review provides a summary of the current state of the field and comments on future prospects that could bring MOFs closer to commercial application.

Tuning Photoactive MIL-68(In) by Functionalized Ligands for Boosting Visible-Light Nitrogen Fixation

In this work, MIL-68(In) functionalized with various ligand substitutions including amine, hydroxyl, bromine, nitro, and methyl groups was prepared, via a one-pot solvothermal reaction for visible-light photocatalytic ammonia synthesis. The diversity of ligands tunes the morphology, geometry, pore environment, and electronic structure of MIL-68(In)-based photocatalysts due to the polarity and intraframework interactions. Amine-inserted MIL-68(In) outperforms its counterparts, presenting a boosted nitrogen photofixation rate of 140.34 μmol g_cat^-1 h^-1 with an apparent quantum efficiency of 5.69% at 420 nm. Further, the size of the batch solvothermal reactor and the amine group content also influence the photocatalytic activity. The combined experimental and theoretical results reveal that amine substituents improve the chemisorption of nitrogen molecules and the conversion of nitrogen into ammonia follows a dual pathway, i.e., a Mars-van Krevelen process and a ligand-to-metal charge transfer mechanism. This work provides a molecular engineering strategy via dual catalysis toward efficient ammonia production.

Unraveling the timescale of the structural photo-response within oriented metal-organic framework films

Fundamental knowledge on the intrinsic timescale of structural transformations in photo-switchable metal-organic framework films is crucial to tune their switching performance and to facilitate their applicability as stimuli-responsive materials. In this work, for the first time, an integrated approach to study and quantify the temporal evolution of structural transformations is demonstrated on an epitaxially oriented DMOF-1-on-MOF film system comprising azobenzene in the DMOF-1 pores (DMOF-1/AB). We employed time-resolved Grazing Incidence Wide-Angle X-Ray Scattering measurements to track the structural response of the DMOF-1/AB film upon altering the length of the azobenzene molecule by photo-isomerization (trans-to-cis, 343 nm; cis-to-trans, 450 nm). Within seconds, the DMOF-1/AB response occurred fully reversible and over several switching cycles by cooperative photo-switching of the oriented DMOF-1/AB crystallites as confirmed further by infrared measurements. Our work thereby suggests a new avenue to elucidate the timescales and photo-switching characteristics in structurally responsive MOF film systems.

Advances in plasmonic-based MOF composites, their bio-applications and perspectives in this field

INTRODUCTION

Nanomaterials have been used for bio-applications since the late 20st century. In an attempt to tailor and optimize their properties, and by extension their efficiency, composites have attracted considerable attention. In this regard, recent studies on plasmonic nanoparticles and metal-organic framework (NP@MOF) composites suggested these materials show great promise in this field.

AREAS COVERED

This review focused on the more recent scientific advances in the synthetic strategies to optimize plasmonic MOF nanocomposites currently available, as well as their bio-application, particularly as biosensors and therapy.

EXPERT OPINION

Plasmonic MOF nanocomposites have shown great potential as they combine the properties of both materials with proven efficiency in bio-application. On the one hand, nanoMOFs have proven their potential particularly as drug nanocarriers, owing to their exceptional porosity and tunability. On the other hand, plasmonic nanoparticles have been an asset for imaging and phototherapy. Different strategies have been reported to develop these nanocomposites, mainly including core-shell, encapsulation, and in situ reduction. In addition, advanced composite structures should be considered, such as mixed metal nanoparticles, hollow structures or the combination of several approaches. Specifically, plasmonic MOF nanocomposites prove to be attractive stimuli responsive drug delivery systems, phototherapeutic agents as well as highly sensitive biosensors.

Metal-organic frameworks in chiral separation of pharmaceuticals

Stereoselective chiral molecules are responsible for specific biological functions in nature. At present, more than half of the prescribed drugs are chiral. Living organisms display divergent pharmacological responses to the enantiomers, leading to altered toxicity, pharmacokinetics, and pharmacodynamics. Thus, chiral analysis, separation, and extraction are crucial for ensuring enantiomeric purity to develop safe and effective medication. In recent times, metal-organic frameworks (MOFs) with appealing structures are gaining importance because of their fascinating properties as a sorbent and stationary phase. MOFs are crystalline porous solid materials built by interconnecting metal ions or clusters and organic linkers. This review explores the advancements in MOFs for the isolation and separation of chiral active pharmaceutical drugs.

Rapid and Specific Enhanced Luminescent Switch of Aniline Gas by MOFs Assembled from a Planar Binuclear Cadmium(II) Metalloligand

Due to the low vapor pressure of aniline, it is challenging to develop a specific rapid fluorescence detection material for low concentrations of aniline gas, which is suspected to result in carcinogenicity when people are exposed by ingestion, inhalation, and skin contact. Herein, the easy-preparing Schiff base ligands were employed to construct the binuclear cadmium(II) compounds featuring a good plane and fine luminescent property, and then, the end groups were changed, making the compounds metalloligands to further build the 3D metal-organic frameworks (MOFs), named MECS-2. It is found that MECS-2 can achieve specific luminescent enhancement response for aniline gas. Furthermore, a large-scale MECS-2a film could be easily prepared by electrospinning nanoMECS-2, which presents the highly efficient and visual detection for aniline gas with the luminescent enhancement effect up to 20 times and good repeatability. Our work provides a good example for the efficient construction of MOF-based films with the fluorescence detection function for organic aromatic gases.

Activation of Cadmium–Imidazole Buffering Coordination Polymer by Sulfur-Doping for the Enhancement of Photocatalytic Degradation of Cationic and Anionic Dyes Under Visible Light

The buffering Cadmium–Imidazole Coordination Polymer (Cd–Im-CP) was synthesized hydrothermally from cadmium chloride and imidazole at 70 °C and then was subjected to doping- by the non-metal sulfur using Na2S solution as a novel modification strategy to produce S–Cd–Im CPs. To investigate doping nature and its effects, Cd–Im CP and S–Cd–Im CPs were characterized applying different analyses techniques, FTIR, Raman, PXRD, SEM/EDX, TGA, and UV–Vis DRS analyses. Characterizations showed the successful chemical doping of sulfur. The inclusion of sulfur within chemical CP structure caused narrowing of material’s bandgap from 4.55 and 3.4 eV to 4.25 and 2.35 eV for S–Cd–Im CPs allowing it for photoresponse towards Visible-light. Both Cd–Im CP and S–Cd–Im CPs were applied for photocatalytic degradation of the selected dyes methylene blue (MB),and methyl orange (MO) employing visible and UV irradiations considering three different initial pH levels to investigate the consequence of sulfur doping. After eliminating the photolysis effect, the best degradation by S–Cd–Im CPs was recorded for MB at initial pH 4 being 13 fold that is for Cd–Im CP. The highest apparent turnover frequencies are 1.2 × 10−3 h−1 for MB at initial pH 10 and 1.03 × 10−4 h−1 for MO at initial pH 4 are given by 10S–Cd–IM CP under Visible-light. Generally, S–Cd–Im CPs remarkably improved photocatalysis degradation of both the dyes for all initial pH levels under Visible-light.

Two new supramolecular Ag(I) coordination polymers: luminescent properties and treatment activity on glioblastoma

Two new Ag(I) coordination polymers, namely [Ag(bpp)]·0.5 n(1,5-NDSA)·n(H₂O) (1) and [Ag₂(bpp)₂]_n·n(2,7-NDSA)·2 n(H₂O)·n(CH₃CN) (2) (Na₂(1,5-NDSA) = sodium 1,5-naphthalenedisulfonate dibasic, Na₂(2,7-NDSA) = sodium 1,5-naphthalenedisulfonate dibasic, bpp is 1,3-bis(4-pyridyl)propane), were generated via the solution evaporation method under room temperature. Moreover, the solids of these two compounds display strong luminescence emission at RT. And the application values of the compounds against the glioblastoma treatment were determined, and the corresponding mechanism was simultaneously tested. The analysis of CCK-8 was first implemented and the glioblastoma viability was measured. The real-time RT-PCR was next performed, and the signaling pathway activation of VEGF in glioblastoma cells was tested after treating by the above compound.

Insight into the Photocatalytic Activity of Cobalt-Based Metal–Organic Frameworks and Their Composites

Nowadays, materials with great potential for environmental protection are being sought. Metal–organic frameworks, in particular those with cobalt species as active sites, have drawn considerable interest due to their excellent properties. This review focuses on describing cobalt-based MOFs in the context of light-triggered processes, including dye degradation, water oxidation and splitting, carbon dioxide reduction, in addition to the oxidation of organic compounds. With the use of Co-based MOFs (e.g., ZIF-67, Co-MOF-74) as photocatalysts in these reactions, even over 90% degradation efficiencies of various dyes (e.g., methylene blue) can be achieved. Co-based MOFs also show high TOF/TON values in water splitting processes and CO2-to-CO conversion. Additionally, the majority of alcohols may be converted to aldehydes with efficiencies exceeding 90% and high selectivity. Since Co-based MOFs are effective photocatalysts, they can be applied in the elimination of toxic contaminants that endanger the environment.

Study on the synthesis and host–guest luminescence properties of a novel Cd(ii)-picolinate coordination polymer

A coordination polymer with guest-molecule-based luminescence is flexible in preparation and shows greater controllability.

In situ ligand-induced Ln-MOFs based on a chromophore moiety: white light emission and turn-on detection of trace antibiotics

Series novel 3D Ln-MOFs containing both carboxyphenyl and pyridinyl moieties have been constructed. Tb-MOF fluorescence turn-on sensor of levofloxacin solution with highly sensitive and excellent selective was achieved through d-PET approach.

Luminescent MOFs (LMOFs): Recent Advancement Towards a Greener WLED Technology

The replacement of the traditional incandescent, halogen and fluorescent lamps by white light emitting diodes (WLEDs) is expected to reduce the global electricity consumption by one-third by 2030, according to...

Multifunctional luminescence sensing and white light adjustment of lanthanide metal-organic frameworks constructed from the flexible cyclotriphosphazene-derived hexacarboxylic acid ligand

Considering that cyclotriphosphazene polycarboxylic acid is a kind of organic ligand with fantastic structures and performances and the unique luminescence characteristics of rare earth ions, a series of porous lanthanide metal-organic frameworks (Ln-MOFs) (CH3)2NH2[Ln3(HCPCP)1.5(CH3COO)]·6DMA (Ln = Ce (1), Sm (2), Eu (3), Tb (4), HCPCP = hexa(4-carboxyphenoxy)cyclotriphosphazene, and DMA = N,N-dimethylacetamide) were synthesized with novel topological network structures. Compound 4 exhibited a sensitive recognition of -NO2, and had a fluorescence quenching phenomenon for seven kinds of nitro aromatic compounds (NACs). In particular, it showed the best fluorescence response to 2,4,6-trinitrophenol (TNP) and 2,4-dinitrophenol (DNP), and the KSV values were 2.86 × 105 M-1 and 8.21 × 104 M-1, and the limit of detection (LOD) values were 0.20 μM and 0.71 μM, respectively. At the same time, we successfully doped different concentrations of Eu3+ into compound 4 to obtain a series of doped Ln-MOF materials x%Eu3+@4 (x = 0.5, 2.5, 5, 7.5, 10, 15 and 20). With the increase of Eu3+ doping ratios, the characteristic peaks of Tb3+ and Eu3+ changed regularly, and the energy transfer from Tb3+ to Eu3+ ions occurred. By changing the excitation wavelength of the samples with different Eu3+ doping concentrations, a higher quality white light emitting material 7.5%Eu3+@4 (λex = 340 nm) was finally obtained, with a CIE coordinate of (0.3268, 0.3212).

A novel 3D terbium metal-organic framework as a heterogeneous Lewis acid catalyst for the cyanosilylation of aldehyde

A novel 3D lanthanide(iii) metal-organic framework (MOF) (namely Tb-MOF), was synthesized by self-assembly from Tb(iii) ion nitrate and the rigid organic ligand H₂sbdc (H₂sbdc = 5,5-dioxo-5H-dibenzo[b,d]thiophene-3,7-dicarboxylic acid), and could work as an efficient heterogeneous catalyst for the cyanosilylation of aromatic aldehydes at room temperature. The obtained Tb-MOF has been characterized and analysed in detail by single crystal X-ray diffraction, powder X-ray diffraction, thermogravimetric analysis and so on. The pores of Tb-MOF provided a microenvironment that was beneficial for the substrates to be close to the Lewis acid catalytic sites. The IR spectrogram and the fluorescence titration proved that the substrates could be activated inside the channel of Tb-MOF. The heterogeneous Tb-MOF catalyst with fine catalytic efficiency exhibited a high TON (TON = 460), and could be recycled at least three times without significantly reducing its activity.

Concluding remarks: current and next generation MOFs

This paper describes the content of my "Concluding remarks" talk at the Faraday Discussion meeting on "MOFs for energy and the environment" (online, 23-25 June 2021). The panel consisted of sessions on the design of MOFs and MOF hybrids (synthetic chemistry), their applications (e.g., capture, storage, separation, electrical devices, photocatalysis), advanced characterization (e.g., transmission electron microscopy, solid-state nuclear magnetic resonance), theory and modeling, and commercialization. MOF chemistry is undergoing a significant evolution from simply network chemistry to the chemistry of synergistic integration with heterogeneous materials involving other disciplines (we call this the fourth generation type). As reflected in the papers of the invited speakers and discussions with the participants, the present and future of this field will be described in detail.