Where do we stand to oversee the coronaviruses in aqueous and aerosol environment? Characteristics of transmission and possible curb strategies

Activation of CGRP receptor-mediated signaling promotes tendon-bone healing

Calcitonin gene-related peptide (CGRP), an osteopromotive neurotransmitter with a short half-life, shows increase while calcitonin receptor-like (CALCRL) level is decreased at the early stage in bone fractures. Therefore, the activation of CALCRL-mediated signaling may be more critical to promote the tendon-bone healing. We found CGRP enhanced osteogenic differentiation of BMSCs through PKA/CREB/JUNB pathway, contributing to improved sonic hedgehog (SHH) expression, which was verified at the tendon-bone interface (TBI) in the mice with Calcrl overexpression. The osteoblast-derived SHH and slit guidance ligand 3 were reported to favor nerve regeneration and type H (CD31hiEMCNhi) vessel formation, respectively. Encouragingly, the activation or inactivation of CALCRL-mediated signaling significantly increased or decreased intensity of type H vessel and nerve fiber at the TBI, respectively. Simultaneously, improved gait characteristics and biomechanical performance were observed in the Calcrl overexpression group. Together, the gene therapy targeting CGRP receptor may be a therapeutic strategy in sports medicine.

Discovery of Brassica Yellows Virus and Porcine Reproductive and Respiratory Syndrome Virus in Diaphorina citri and Changes in Virome Due to Infection with 'Ca. L. asiaticus'

Detection of new viruses or new virus hosts is essential for the protection of economically important agroecosystems and human health. Increasingly, metatranscriptomic data are being used to facilitate this process. Such data were obtained from adult Asian citrus psyllids (ACP) (Diaphorina citri Kuwayama) that fed solely on mandarin (Citrus ×aurantium L.) plants grafted with buds infected with 'Candidatus Liberibacter asiaticus' (CLas), a phloem-limited bacterium associated with the severe Asian variant of huanglongbing (HLB), the most destructive disease of citrus. Brassica yellows virus (BrYV), the causative agent of yellowing or leafroll symptoms in brassicaceous plants, and its associated RNA (named as BrYVaRNA) were detected in ACP. In addition, the porcine reproductive and respiratory syndrome virus (PRRSV), which affects pigs and is economically important to pig production, was also found in ACP. These viruses were not detected in insects feeding on plants grafted with CLas-free buds. Changes in the concentrations of insect-specific viruses within the psyllid were caused by coinfection with CLas. IMPORTANCE The cross transmission of pathogenic viruses between different farming systems or plant communities is a major threat to plants and animals and, potentially, human health. The use of metagenomics is an effective approach to discover viruses and vectors. Here, we collected buds from the CLas-infected and CLas-free mandarin (Citrus ×aurantium L. [Rutaceae: Aurantioideae: Aurantieae]) trees from a commercial orchard and grafted them onto CLas-free mandarin plants under laboratory conditions. Through metatranscriptome sequencing, we first identified the Asian citrus psyllids feeding on plants grafted with CLas-infected buds carried the plant pathogen, brassica yellows virus and its associated RNA, and the swine pathogen, porcine reproductive and respiratory syndrome virus. These discoveries indicate that both viruses can be transmitted by grafting and acquired by ACP from CLas+ mandarin seedlings.

COMPARATIVE ASSESSMENT OF BACTERIAL PERMEABILITY OF A PERSONAL PROTECTIVE RESPIRATORY EQUIPMENT AT DIFFERENT DURATIONS OF ITS CONTINUOUS OPERATION

OBJECTIVE

The aim: To establish the level of antibacterial protection of the studied personal protective respiratory equipment set and its main components and compare antibacterial resistance of the personal protective respiratory equipment set in the presence and absence of filtering components.

PATIENTS AND METHODS

Materials and methods: The proposed methodology for assessing biological protection parameters is based on testing the permeability of personal respiratory protection equipment for bacteria by the method of serial dilutions. Also additional culturing of separate components of the protective set on a separate media is carried out. The experiment was also repeated in the absence of filtering elements and when they were replaced by gauze masks.

RESULTS

Results: The use of a fully equipped pneumatic helmet counteracted the penetration of the bacterial aerosol, which was manifested in the absence of growth on the media. The results obtained with the full configuration, as well as the indicators of the spread of bacteria when removing the filter elements and replacing them with gauze masks, showed that the device creates sufficient positive air pressure inside. The latter becomes a restraining factor that does not allow microorganisms to penetrate through the lower circuit.

CONCLUSION

Conclusions: Increasing the duration of continuous operation of the conceptual model up to 24 hours, increasing the bacterial load on the filters do not lead to a deterioration in the properties of antibacterial protection. Bacterial aerosol did not penetrate into the inner space of pneumatic helmet.

A review about COVID-19 in the MENA region: environmental concerns and machine learning applications

Coronavirus disease 2019 (COVID-19) has delayed global economic growth, which has affected the economic life globally. On the one hand, numerous elements in the environment impact the transmission of this new coronavirus. Every country in the Middle East and North Africa (MENA) area has a different population density, air quality and contaminants, and water- and land-related conditions, all of which influence coronavirus transmission. The World Health Organization (WHO) has advocated fast evaluations to guide policymakers with timely evidence to respond to the situation. This review makes four unique contributions. One, many data about the transmission of the new coronavirus in various sorts of settings to provide clear answers to the current dispute over the virus's transmission were reviewed. Two, highlight the most significant application of machine learning to forecast and diagnose severe acute respiratory syndrome coronavirus (SARS-CoV-2). Three, our insights provide timely and accurate information along with compelling suggestions and methodical directions for investigators. Four, the present study provides decision-makers and community leaders with information on the effectiveness of environmental controls for COVID-19 dissemination.

A safe haven of SARS-CoV-2 in the environment: Prevalence and potential transmission risks in the effluent, sludge, and biosolids

The novel coronavirus, SARS-CoV-2, which has caused millions of death globally is recognized to be unstable and recalcitrant in the environment, especially in the way it has been evolving to form new and highly transmissible variants. Of particular concerns are human-environment interactions and the handling and reusing the environmental materials, such as effluents, sludge, or biosolids laden with the SARS-CoV-2 without adequate treatments, thereby suggesting potential transmission and health risks. This study assesses the prevalence of SARS-CoV-2 RNA in effluents, sludge, and biosolids. Further, we evaluate the environmental, ecological, and health risks of reusing these environmental materials by wastewater/sludge workers and farmers. A systematic review of literature from the Scopus database resulted in a total of 21 articles (11 for effluents, 8 for sludge, and 2 for biosolids) that met the criteria for meta-analysis, which are then subdivided into 30 meta-analyzed studies. The prevalence of SAR-CoV-2 RNA in effluent and sludge based on random-effect models are 27.51 and 10^12.25, respectively, with a 95% CI between 6.14 and 48.89 for the effluent, and 10^4.78 and 10^19.71 for the sludge. However, the prevalence of SARS-CoV-2 RNA in the biosolids based on the fixed-effect model is 30.59, with a 95% CI between 10.10 and 51.08. The prevalence of SARS-CoV-2 RNA in environmental materials indicates the inefficiency in some of the treatment systems currently deployed to inactivate and remove the novel virus, which could be a potential health risk concern to vulnerable wastewater workers in particular, and the environmental and ecological issues for the population at large. This timely review portends the associated risks in handling and reusing environmental materials without proper and adequate treatments.

Gas-Sensitive Cellulosic Triboelectric Materials for Self-Powered Ammonia Sensing

Gas-sensitive materials are capable of dynamic identification and content monitoring of specific gases in the environment, and their applications in the field of gas sensing are promising. However, weak adsorption properties are the main challenge limiting the application of gas-sensitive materials. A highly adsorbent gas-sensitive cellulose nanofibril (CNF)-based triboelectric material with a layered structure is prepared here and it is applied to self-powered gas sensing. The layered structure of the triethoxy-1H,1H,2H,2H-tridecafluoro-n-octylsilane cellulose nanofiber (PFOTES-CNF)-based gas-sensitive material further enhances the adsorption of the material due to electrostatic adsorption in the electrostatic field induced by triboelectricity. It is found that the ammonia-sensitive material obtained by loading Ti₃ C₂ T_x in PFOTES-CNF has a fast response/recovery (12/14 s), high sensitivity response (V_air /V_gas  = 2.1), high selectivity response (37.6%), and low detection limit (10 ppm) for 100 ppm of ammonia gas. In addition, the ammonia-sensitive CNF-based triboelectric material can accurately identify NH₃ concentration changes in the range of 10-120 ppm and transmit the signal wirelessly to the user interface, facilitating real-time online monitoring of NH₃ in the environment. A novel strategy is provided here for designing and preparing high-performance gas-sensitive composites and the analysis of self-powered gas sensing is guided.

Assembly: A Key Enabler for the Construction of Superior Silicon-Based Anodes

Silicon (Si) is regarded as the most promising anode material for high-energy lithium-ion batteries (LIBs) due to its high theoretical capacity, and low working potential. However, the large volume variation during the continuous lithiation/delithiation processes easily leads to structural damage and serious side reactions. To overcome the resultant rapid specific capacity decay, the nanocrystallization and compound strategies are proposed to construct hierarchically assembled structures with different morphologies and functions, which develop novel energy storage devices at nano/micro scale. The introduction of assembly strategies in the preparation process of silicon-based materials can integrate the advantages of both nanoscale and microstructures, which significantly enhance the comprehensive performance of the prepared silicon-based assemblies. Unfortunately, the summary and understanding of assembly are still lacking. In this review, the understanding of assembly is deepened in terms of driving forces, methods, influencing factors and advantages. The recent research progress of silicon-based assembled anodes and the mechanism of the functional advantages for assembled structures are reviewed from the aspects of spatial confinement, layered construction, fasciculate structure assembly, superparticles, and interconnected assembly strategies. Various feasible strategies for structural assembly and performance improvement are pointed out. Finally, the challenges and integrated improvement strategies for assembled silicon-based anodes are summarized.

Review of Method and a New Tool for Decline and Inactive SARS-CoV-2 in Wastewater Treatment

Following the recent outbreak of the COVID-19 pandemic caused by the SARS-CoV-2 virus, monitoring sewage has become crucial, according to reports that the virus was detected in sewage. Currently, various methods are discussed for understanding the SARS-CoV-2 using wastewater surveillance. This paper first introduces the fundamental knowledge of primary, secondary, and tertiary water treatment on SARS-CoV-2. Next, a thorough overview is presented to summarize the recent developments and breakthroughs in removing SARS-CoV-2 using solar water disinfection (SODIS) and UV (UVA (315–400 nm), UVB (280-315 nm), and UVC (100–280 nm)) process. In addition, Due to the fact that the distilled water can be exposed to sunlight if there is no heating source, it can be disinfected using solar water disinfection (SODIS). SODIS, on the other hand, is a well-known method of reducing pathogens in contaminated water; moreover, UVC can inactivate SARS-CoV-2 when the wavelength is between 100 to 280 nanometers. High temperatures (more than 56°C) and UVC are essential for eliminating SARS-CoV-2; however, the SODIS systems use UVA and work at lower temperatures (less than45°C). Therefore, using SODIS methods for wastewater treatment (or providing drinking water) is not appropriate during a situation like the ongoing pandemic. Finally, a wastewater-based epidemiology (WBE) tracking tool for SARS-CoV-2 can be used to detect its presence in wastewater.

Impact of sewer overflow on public health: A comprehensive scientometric analysis and systematic review

Sewer overflow (SO), which has attracted global attention, poses serious threat to public health and ecosystem. SO impacts public health via consumption of contaminated drinking water, aerosolization of pathogens, food-chain transmission, and direct contact with fecally-polluted rivers and beach sediments during recreation. However, no study has attempted to map the linkage between SO and public health including Covid-19 using scientometric analysis and systematic review of literature. Results showed that only few countries were actively involved in SO research in relation to public health. Furthermore, there are renewed calls to scale up environmental surveillance to safeguard public health. To safeguard public health, it is important for public health authorities to optimize water and wastewater treatment plants and improve building ventilation and plumbing systems to minimize pathogen transmission within buildings and transportation systems. In addition, health authorities should formulate appropriate policies that can enhance environmental surveillance and facilitate real-time monitoring of sewer overflow. Increased public awareness on strict personal hygiene and point-of-use-water-treatment such as boiling drinking water will go a long way to safeguard public health. Ecotoxicological studies and health risk assessment of exposure to pathogens via different transmission routes is also required to appropriately inform the use of lockdowns, minimize their socio-economic impact and guide evidence-based welfare/social policy interventions. Soft infrastructures, optimized sewer maintenance and prescreening of sewer overflow are recommended to reduce stormwater burden on wastewater treatment plant, curtail pathogen transmission and marine plastic pollution. Comprehensive, integrated surveillance and global collaborative efforts are important to curtail on-going Covid-19 pandemic and improve resilience against future pandemics.

Monitoring COVID-19 through SARS-CoV-2 quantification in wastewater: progress, challenges and prospects

Wastewater‐Based Epidemiology (WBE) is widely used to monitor the progression of the current SARS‐CoV‐2 pandemic at local levels. In this review, we address the different approaches to the steps needed for this surveillance: sampling wastewaters (WWs), concentrating the virus from the samples and quantifying them by qPCR, focusing on the main limitations of the methodologies used. Factors that can influence SARS‐CoV‐2 monitoring in WWs include: (i) physical parameters as temperature that can hamper the detection in warm seasons and tropical regions, (ii) sampling methodologies and timetables, being composite samples and Moore swabs the less variable and more sensitive approaches, (iii) virus concentration methodologies that need to be feasible and practicable in simpler laboratories and (iv) detection methodologies that should tend to use faster and cost‐effective procedures. The efficiency of WW treatments and the use of WWs for SARS‐CoV‐2 variants detection are also addressed. Furthermore, we discuss the need for the development of common standardized protocols, although these must be versatile enough to comprise variations among target communities. WBE screening of risk populations will allow for the prediction of future outbreaks, thus alerting authorities to implement early action measurements.

Water science under the global epidemic of COVID-19: Bibliometric tracking on COVID-19 publication and further research needs

There are overwhelming increases of studies and over 200,000 publications related to all the aspects of COVID-19. Among them, 262 papers were published by authors from 67 countries regarding COVID-19 with water science and technology. Although the transmission routes of SARS-CoV-2 in water cycle have not been proved, the water and wastewater play an important role in the control of COVID-19 pandemic. Accordingly, it is scholarly relevant and interesting to look into publications of COVID-19 in water science and technology to track the investigations for moving forward in the years to come. It is believed that, through the literature survey, the question on what we know and what we do not know about COVID-19 so far can be clear, thus providing useful information for helping curbing the epidemic from water sector. This forms the basis of the current study. As such, a bibliometric analysis was conducted. It reveals that wastewater-based epidemiology (WBE) has recently gained global attention with the source and survival characteristics of coronavirus in the aquatic environment; the methodology of virus detection; the water hygiene; and the impact of the COVID-19 pandemic on the water ecosystem being the main topics in 2020. Various studies have shown that drinking water is safety whereas wastewater may be a potential risk during this pandemic. From the perspective of the water cycle, the scopes for further research needs are discussed and proposed, which could enhance the important role and value of water science in warning, monitoring, and predicting COVID-19 during epidemic outbreaks.