Degradation of sulfamethoxazole by MnO2/heat-activated persulfate: Kinetics, synergistic effect and reaction mechanism

Enhanced perfluorooctanoic acid (PFOA) degradation by electrochemical activation of peroxydisulfate (PDS) during electrooxidation for water treatment

Improved treatment of per- and polyfluoroalkyl substances (PFAS) in water is critically important in light of the proposed United States Environmental Protection Agency (USEPA) drinking water regulations at ng L-1 levels. The addition of peroxymonosulfate (PMS) during electrooxidation (EO) can remove and destroy PFAS, but ng L-1 levels have not been tested, and PMS itself can be toxic. The objective of this research was to test peroxydisulfate (PDS, an alternative to PMS) activation by boron-doped diamond (BDD) electrodes for perfluorooctanoic acid (PFOA) degradation. The influence of PDS concentration, temperature, and environmental water matrix effects, and PFOA concentration on PDS-EO performance were systematically examined. Batch reactor experiments revealed that 99 % of PFOA was degraded and 69 % defluorination was achieved, confirming PFOA mineralization. Scavenging experiments implied that sulfate radicals (SO4-) and hydroxyl radicals (HO) played a more important role for PFOA degradation than 1O2 or electrons (e-). Further identification of PFOA degradation and transformation products by liquid chromatography-mass spectrometry (LC-MS) analysis established plausible PFOA degradation pathways. The analysis corroborates that direct electron transfers at the electrode initiate PFOA oxidation and SO4- improves overall treatment by cleaving the CC bond between the C7F15 and COOH moieties in PFOA, leading to possible products such as C7F15 and F-. The perfluoroalkyl radicals can be oxidized by SO4- and HO, resulting in the formation of shorter chain perfluorocarboxylic acids (e.g., perfluorobutanoic acid [PFBA]), with eventual mineralization to CO2 and F-. At an environmentally relevant low initial concentration of 100 ng L-1 PFOA, 99 % degradation was achieved. The degradation of PFOA was slightly affected by the water matrix as less removal was observed in an environmental river water sample (91 %) compared to tests conducted in Milli-Q water (99 %). Overall, EO with PDS provided a destructive approach for the elimination of PFOA.

Insight into the degradation of carbamazepine by electrochemical-pressure UV-activated peroxodisulphate process: kinetics, radicals, and degradation pathway

In this work, to improve the performance of peroxodisulphate-advanced oxidation, an electrochemical oxidation-assisted UV light-activated peroxodisulphate system (E/UV/PDS) was used to degrade carbamazepine. The degradation of carbamazepine by PDS, E/PDS, UV/PDS and E/UV/PDS systems was compared, and their synergistic effects were analysed. The influence of single factors, such as PDS addition, initial pH, DS voltage, target initial concentration, etc., on the degradation of the E/UV/PDS system was discussed, and the optimal degradation process parameters were given. The active substances were determined by free radical inhibition experiments, such as 1O2, SO 4 - ⋅ and ⋅ OH . It was proved that 1O2 contributes much more to the degradation of carbamazepine than SO 4 - ⋅ and ⋅ OH . The degradation pathway of carbamazepine was proposed. Finally, the degradation mechanism of carbamazepine in the E/UV/PDS system was speculated. The results indicate that the electrochemical combined with the E/UV/PDS system is of great potential application value in the removal of antibiotic drug pollution and environmental purification.

Persulfate catalyst synthesized with waterworks sludge for degrading Safranine T in the presence of boron

Energy conservation and emission reduction are the general trend of the present world. In this study, a catalyst of 3WSH based on the waste recycle of waterworks sludge (WS) and Chinese herbs was prepared using one-step calcination treatment and then characterized by SEM, XRD, XPS, FTIR and BET. The catalytic performance of 3WSHB for activating potassium persulfate (PDS) was evaluated through the degradation of Safranine T (ST) in the presence of boron powder (B). The effects of vital parameters on ST removal were systematically studied, including PDS concentration, 3WSHB dosage, initial solution pH, B dosage, temperature and coexisting cations. The highest efficiency of ST removal was up to 93.0% under the optimal condition with 1.85 mM of PDS, 0.3 g/L of 3WSHB, 0.35g/L of B, 7 of pH. EPR and free radical quenching experiments demonstrated that •OH was the dominant reactive oxygen species for ST degradation in the PDS/3WSHB/B system. Moreover, the intermediates determined by HPLC-MS indicated that the oxidization of benzene ring substituents in ST and a hydrogen abstraction by electron transfer might occur during ST degradation. The dissatisfied reuse performance of 3WSHB might be attributed to its low Fe content and simple reusing way. The results demonstrate the effectiveness of WS recycling and reuse in the field of pollutant remediation.

Sustainable production of Fe-doped MnO2 nanoparticles for accelerated tetracycline antibiotic detoxification

Manganese dioxide (MnO2) has been recognized as one of the natural systems' most active mineral oxidants. However, when it comes to catalytic oxidation of antibiotic applications, pure MnO2 falls short in delivering satisfactory performance. Hence, a set of Fe3+-doped porous MnO2 (0.02Fe-MnO2, 0.1Fe-MnO2, and 0.14Fe-MnO2) nanoparticles were synthesized here via a convenient and energy-efficient one-step reaction method. A series of experiments revealed that Fe-doping strategy enhances the properties of MnO2 host by suppressing the crystalline structure, increasing the amount of surface oxygen defects, and modifying the Mn3+/Mn4+ ratio. Specifically, the tetracycline (TC) removal efficiency of 0.14Fe-MnO2 reaches 92% without the need for any additional co-oxidant, representing a 20% improvement over pristine MnO2 nanoparticles. Moreover, this process shows a fast dynamic (achieving 70% of TC removal in just 5 min) and demonstrates pH-resistance, maintaining high TC removal efficiency (≥90%) over a wide pH range of 3.0-9.0. Mechanical studies reveal that the degradation of TC can be attributed to the oxidation by reactive oxygen radicals and Mn3+, with 1O2 being the primary radical involved in the reaction, accounting for 55% of TC removal. Importantly, cytotoxicity testing indicates that the biotoxicity of TC toward organisms can be effectively mitigated using 0.14Fe-MnO2 nanomaterial. This study presents a readily applicable candidate for economically and conveniently eliminating of environmental TC pollution, thereby reducing the threat posed by TC pollution to the ecosystem.

Silica enhanced activation and stability of Fe/Mn decorated sludge biochar composite for tetracycline degradation

In this study, SiO₂-composited biochar decorated with Fe/Mn was prepared by co-pyrolysis method. The degradation performance of the catalyst was evaluated by activating persulfate (PS) to degrade tetracycline (TC). The effects of pH, initial TC concentration, PS concentration, catalyst dosage and coexisting anions on degradation efficiency and kinetics of TC were investigated. Under optimal conditions (TC = 40 mg L^-1, pH = 6.2, PS = 3.0 mM, catalyst = 0.1 g L^-1), the kinetic reaction rate constant could reach 0.0264 min^-1 in Fe₂Mn₁@BC-0.3SiO₂/PS system, which was 12 times higher than that in the BC/PS system (0.00201 min^-1). The electrochemical, X-ray diffractometer (XRD), Fourier transform infrared spectrum (FT-IR) and X-ray photoelectron spectroscopy (XPS) analysis showed that both metal oxides and oxygen-containing functional groups provide more active sites to activate PS. The redox cycle between Fe(II)/Fe(III) and Mn(II)/Mn(III)/Mn(IV) accelerated the electron transfer and sustained the catalytic activation of PS. Radical quenching experiments and electron spin resonance (ESR) measurements confirmed that surface sulfate radical (SO₄^•-) play a key role in TC degradation. Three possible degradation pathways of TC were proposed based on high-performance liquid chromatography coupled with high-resolution mass spectrometry (HPLC-HRMS) analysis, the toxicity of TC and its intermediates was analyzed by bioluminescence inhibition test. In addition to the enhanced catalytic performance, the presence of silica also improved the stability of the catalyst, as confirmed by cyclic experiment and metal ion leaching analysis. The Fe₂Mn₁@BC-0.3SiO₂ catalyst, derived from low-cost metals and bio-waste materials, offer an environmentally friendly option to design and implement heterogenous catalyst system for pollutant removal in water.

Peroxymonosulfate activation with an α-MnO2/Mn2O3/Mn3O4 hybrid system: parametric optimization and oxidative degradation of organic dye

The present study proposed the synthesis of low-toxicity and eco-friendly spherically shaped manganese oxides (α-MnO₂, Mn₂O₃, and Mn₃O₄) by using the chemical precipitation method. The unique variable oxidation states and different structural diversity of manganese-based materials have a strong effect on fast electron transfer reactions. XRD, SEM, and BET analyses were used to confirm the structure morphology, higher surface area, and excellent porosity. The catalytic activity of as-prepared manganese oxides (MnO_x) was investigated for the rhodamine B (RhB) organic pollutant with peroxymonosulfate (PMS) activation under the condition of control pH. In acidic conditions (pH = 3), complete RhB degradation and 90% total organic carbon (TOC) reduction were attained in 60 min. The effects of operating parameters such as solution pH, PMS loading, catalyst dosage, and dye concentration on RhB removal reduction were also tested. The different oxidation states of MnO_x promote the oxidative-reductive reaction under acidic conditions and enhance the SO₄^•-/^•OH radical formation during the treatment, whereas the higher surface area offers sufficient absorption sites for interaction of the catalyst with pollutants. A scavenger experiment was used to investigate the generation of more reactive species that participate in dye degradation. The effect of inorganic anions on divalent metal ions that genuinely occur in water bodies was also studied. Additionally, separation and mass analysis were used to investigate the RhB dye degradation mechanism at optimum conditions based on the intermediate's identification. Repeatability tests confirmed that MnO_x showed superb catalytic performance on its removal trend.

Removal of bisphenol A and methylene blue through persulfate activation by calcinated α-MnO2 nanorods: effect of ultrasonic assistance and toxicity assessment

This work investigates the efficacy of α-MnO₂ nanorods for persulfate-mediated degradation of bisphenol A (BPA) and methylene blue (MB), in silent and ultrasonic-assisted systems. The conversion of α-MnO₂ nanoparticle flakes to nanorods occurs upon calcination at a temperature of 400 °C for 3 h under the ramping conditions. The comparative characterization of nanomaterials pre- and post-calcination reveals better physical, chemical, and thermal properties of α-MnO₂ nanorods. The impact of various operational parameters such as pH, dosage of nanorods, persulfate dose, selected contaminant concentration, ultrasound frequency and power, scavengers, and landfill leachate medium on the degradation of pollutants is also assessed. The ultrasonic assistance yields higher removal for both BPA and MB than the silent system. This may be attributed to the generation of more radicals as ultrasound activates persulfate. This can be due to acoustic cavitation, which leads to better solute dissociation and excited state. The results obtained through scavenger tests reveal that both OH^• and SO₄^•- can contribute to degradation, but the role of SO₄^•- is found dominant. Significant removal of BPA and MB ((BPA)_silent, 87.12%; (MB)_silent, 96.54%; (BPA)_ultrasonic, 88.75%; (MB)_ultrasonic, 93.86%)) is observed in landfill leachate medium. The degradation pathway for pollutants is also proposed. The toxicity of pollutants and their degradation intermediates are evaluated using Ecological Structure Activity Relationships (ECOSAR) program. The results indicate reduced toxicity of BPA intermediates, while most MB degradation intermediates show higher toxicity. Therefore, it can be affirmed that removing pollutants does not ensure a completely non-toxic process. However, the study proposes a comprehensive toxicity evaluation and eliminating toxic intermediates for completely harmless wastewater treatment.

Heat-activated persulfate for the degradation of micropollutants in water: A comprehensive review and future perspectives

This work is a critical review of the most important studies that have dealt with heat-activated persulfate to degrade persistent micropollutants in the last six years. The effect of the different operating parameters is discussed, wherein in all cases, the efficiency was favored at higher temperatures and oxidant concentrations. Particular emphasis was given to the effect of the aqueous matrix. Since heat activation is a homogeneous process based on the production of free radicals, in most of the studies presented, the removal of pollutants decreases as the complexity of the aqueous matrix increases except in cases where secondary oxidative species are produced that are selective with specific pollutants. It has also been observed that the change in toxicity usually follows the removal of the parent compound despite the formation of several by-products. Nowadays, combining different processes for the simultaneous activation of persulfate seems to be gaining ground. A hybrid process is an interesting strategy to reduce costs and increase efficiency, especially in real wastewater. In this light, the most interesting studies of hybrid systems for the destruction of micropollutants in recent years based on thermally activated persulfate are also summarized. Finally, some steps are proposed for future research towards the industrial application, including the study of chemical mixtures, the integrated toxicity assessment, the examination of simultaneous disinfection and decomposition of pollutants into real wastewater, the estimation of the required costs, and energy the combination of processes and their coupling with renewable sources, and the design of pilot plants and the scale-up of the hybrid processes.

Effect of peroxydisulfate oxidation catalyzed with ordered mesoporous carbons on controlling ultrafiltration membrane fouling by algal organic matter

As typical ordered mesoporous carbons (OMCs) materials, CMK-3 and CMK-8 were proposed for catalyzing peroxydisulfate (PDS), and the OMCs/PDS process was combined with membrane filtration to remove algal extracellular organic matter and mitigate membrane fouling. The CMK-3/PDS process achieved substantial reduction of dissolved organic carbon and UV₂₅₄, followed by CMK-8/PDS. The degradation behavior of fluorescent organics demonstrated the superior performance of OMCs/PDS, while the decomposition of high molecular weight (MW) compounds and generation of lower MW organics were observed. Generally, CMK-3 possessed higher catalytic activity on PDS compared with CMK-8 and powdered activated carbon. The CMK-3/PDS process distinctly decreased the fouling resistances for polyether sulfone and polyvinylidene fluoride membranes, with the reversible resistance reduced by 59.5-83.2% and irreversible resistance declined by 71.7-73.0%. In the meanwhile, CMK-3/PDS prolonged the volumes to the transition period, and postponed the cake layer's generation. The characterization of the membrane morphologies and chemical compositions also showed effective alleviation of fouling. The generated SO₄^-, OH, O₂^- and ¹O₂ as major active oxidation species provided radical as well as non-radical reaction ways for pollutants removal. Overall, our study provides some new ideas for membrane-based combined water purification processes.

Experimental Study on the Treatment of Landfill Leachate by Electro-Assisted ZVI/UV Synergistic Activated Persulfate System

To solve the problem of the poor treatment of high concentration landfill leachate, an electro-assisted ultraviolet (UV)/zero-valent iron (ZVI) synergic activated persulfate (PS) system was used to treat landfill leachate. The effects of PS and ZVI dosage, initial pH value, and current density on the removal efficiency of COD and NH3-N in landfill leachate were investigated. The treatment effects of single PS, single electrochemical, UV/PS, electro-assisted ZVI activated PS, and electro-assisted ZVI/UV co-activated PS were compared. At the same time, UV-visible and three-dimensional fluorescence spectroscopy were performed on the landfill leachate before and after treatment. The results show that under the optimal conditions of initial pH = 3, the dosage of PS/12COD = 1, ZVI = 1.5 g/L, current density 62.5 mA/cm2, and t = 6 h, most of the macromolecular organic substances such as humic acid and fulvic acid were removed. Removal efficiencies of COD, NH3-N, and Chroma reached 81.99%, 89.90%, and 99.75%, respectively. The BOD5/COD value increased from 0.23 to 0.46. In addition, the radical identification results showed that the degradation of COD was due to the combined action of sulfate radicals (SO4•−) and hydroxyl radicals (•OH) and that SO4•− was dominant. The combined means of synergistic activation of PS for landfill leachate treatment was significantly better than that of single means of PS activation, confirming that electrically assisted ZVI/UV synergistic activation of PS is a promising method for landfill leachate treatment.

Application of sulfate radicals-based advanced oxidation technology in degradation of trace organic contaminants (TrOCs): Recent advances and prospects

The large amount of trace organic contaminants (TrOCs) in wastewater has caused serious impacts on human health. In the past few years, Sulfate radical (SO₄^•-) based advanced oxidation processes (SR-AOPs) are widely recognized for their high removal rates of recalcitrant TrOCs from water. Peroxymonosulfate (PMS) and persulfate (PS) are stable and non-toxic strong oxidizing oxidants and can act as excellent SO₄^•- precursors. Compared with hydroxyl radicals(·OH)-based methods, SR-AOPs have a series of advantages, such as long half-life and wide pH range, the oxidation capacity of SO₄^•- approaches or even exceeds that of ·OH under suitable conditions. In this review, we present the progress of activating PS/PMS to remove TrOCs by different methods. These methods include activation by transition metal, ultrasound, UV, etc. Possible activation mechanisms and influencing factors such as pH during the activation are discussed. Finally, future activation studies of PS/PMS are summarized and prospected. This review summarizes previous experiences and presents the current status of SR-AOPs application for TrOCs removal. Misconceptions in research are avoided and a research basis for the removal of TrOCs is provided.