Synthesis of functional hydrochar from olive waste for simultaneous removal of azo and non-azo dyes from water

Mandarin biochar-CO-TETA was utilized for Acid Red 73 dye adsorption from water, and its isotherm and kinetic studies were investigated

Environmental pollution is a major issue today due to the release of dyestuff waste into the environment through industrial wastewater. There is a need for affordable and effective adsorbents to remove harmful dyes from industrial waste. In this study, Mandarin biochar-CO-TETA (MBCOT) adsorbent was prepared and used to remove Acid Red 73 (AR73) dye from aqueous solutions. The efficiency of dye removal was influenced by various factors such as solution pH, contact time, initial AR73 dye concentration, and MBCOT dosage. All experiments were conducted at 25 ± 2 °C, and the optimal pH was determined to be 1.5. The optimal conditions for dye removal were found to be an AR73 dye concentration of 100 mg/L, an MBCOT dosage of 1.5 g/L, and a contact time of 150 min, resulting in a 98.08% removal rate. Various models such as pseudo-first-order (PFO), pseudo-second-order (PSO), film diffusion (FD), and intraparticle diffusion (IPD) were used to determine the adsorption kinetics of AR73 dye onto MBCOT. The results showed that the PSO model best explains the AR73 dye adsorption. Furthermore, Langmuir and Freundlich's isotherm models were studied to explain the adsorption mechanism using experimental data. The adsorption capacities at equilibrium (qe) in eliminating AR73 dye varied from 92.05 to 32.15, 128.9 to 65.39, 129.25 to 91.69, 123.73 to 111.77, and 130.54 to 125.01 mg/g. The maximum adsorption capacity (Qm) was found to be 140.85 mg/g. In conclusion, this study demonstrates that biochar produced from mandarin peels has the potential to be an effective and promising adsorbent for removing AR73 dye from water.

Study on the auxin-like activity of organic compounds extracted from corn waste hydrochar prepared by hydrothermal carbonization

This work studied the auxin-like activity of liquid and solid hydrochar from aboveground corn biomass prepared using hydrothermal carbonization (HTC). Understanding the action of organic compounds in regulating plant metabolism is important to develop strategies to improve plant growth and production. Bioassays were performed by testing liquid hydrochar concentrations in the range of 0.0557-5570.0 mg carbon L-1; and solid hydrochar (via extracted dissolved organic matter, DOM) in the range of 0.026-2600.0 mg carbon L-1, using seeds of Lactuca sativa. SEM, ATR-FTIR, and Py-GC/MS were applied to assess the effect of HTC on hydrochar production/composition. Liquid hydrochar presented an intense bioactivity, completely inhibiting the germination of testing seeds at higher concentrations. Liquid hydrochar also was considerably more bioactive. Py-GC/MS allowed the identification of the molecules involved in IAA-like effects: carboxylic acids (linear and aromatic) and amino acids. The concentration of more bioactive molecules, rather than their simple presence in the hydrochar fraction, determined the bio-stimulating effect, besides an excellent linear regression between the auxin-like effect and the concentration of active molecules.

Magnetic hydrochar grafted-chitosan for enhanced efficient adsorption of malachite green dye from aqueous solutions: Modeling, adsorption behavior, and mechanism analysis

Water pollution by organic dyes is one of the most serious environmental problems worldwide. Malachite green (MG) is considered as one the serious organic dyes which is discharged in wastewater by leather and textile manufacturing plants. MG dye can cause severe hazards to the environment and human health. Therefore, the removal of MG dye from wastewater is very important and essential. This study aims to synthesize a new magnetic hydrochar grafted to chitosan (MWSHC@CS) for the removal of MG dye from the aqueous solutions. Transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) surface area, and Zeta potential analysis were used to characterize the synthesized MWSHC@CS. Batch experiments were conducted to optimize MG dye adsorption conditions, including adsorbent mass, pH, temperature, initial concentration, and contact time. The results revealed that MWSHC@CS had an excellent removal efficiency (96.47 %) for MG dye at the optimum condition (at m: 20 mg, pH: 7.5, t: 420 min, and T: 298 K). Adsorption isotherms outcomes revealed the MG adsorption data were best fit by the Langmuir model with a maximum adsorption capacity (420.02 mg/g). Adsorption kinetics outcomes exhibited that the adsorption process of MG dye fitted well to the Elovich model. The thermodynamic results revealed that the adsorption process was physical, exothermic, and spontaneous. The adsorption mechanisms of MG onto MWSHC@CS were hydrogen bonding, electrostatic interaction, and π-π interactions. Furthermore, MWSHC@CS showed excellent reusability for the removal of MG over five cycles of adsorption-desorption (83.76 %). In conclusion, the study provides a new, low-cost, and effective magnetic nanocomposite based on chitosan as a promising adsorbent for the high-performance removal of MG dye from aqueous solutions.

Recent insights into mechanism of modified bio-adsorbents for the remediation of environmental pollutants

Rapid industrialization has exacerbated the hazard to health and the environment. Wide spectrums of contaminants pose numerous risks, necessitating their disposal and treatment. There is a need for further remediation methods since pollutant residues cannot be entirely eradicated by traditional treatment techniques. Bio-adsorbents are gaining popularity due to their eco-friendly approach, broad applicability, and improved functional and surface characteristics. Adsorbents that have been modified have improved qualities that aid in their adsorptive nature. Adsorption, ion exchange, chelation, surface precipitation, microbial uptake, physical entrapment, biodegradation, redox reactions, and electrostatic interactions are some of the processes that participate in the removal mechanism of biosorbents. These processes can vary depending on the particular biosorbent and the type of pollutants being targeted. The systematic review focuses on the many modification approaches used to remove environmental contaminants. Different modification or activation strategies can be used depending on the type of bio-adsorbent and pollutant to be remediated. Physical activation procedures such as ultrasonication and pyrolysis are more commonly used to modify bio-adsorbents. Ultrasonication process improves the adsorption efficiency by 15-25%. Acid and alkali modified procedures are the most effective chemical activation strategies for adsorbent modification for pollution removal. Chemical modification increases the removal to around 95-99%. The biological technique involving microbial culture is an emerging field that needs to be investigated further for pollutant removal. A short evaluation of modified adsorbents with multi-pollutant adsorption capability that have been better eliminated throughout the adsorption process has been provided.

From Waste to Resource: Valorization of Lignocellulosic Agri-Food Residues through Engineered Hydrochar and Biochar for Environmental and Clean Energy Applications-A Comprehensive Review

Agri-food residues or by-products have increased their contribution to the global tally of unsustainably generated waste. These residues, characterized by their inherent physicochemical properties and rich in lignocellulosic composition, are progressively being recognized as valuable products that align with the principles of zero waste and circular economy advocated for by different government entities. Consequently, they are utilized as raw materials in other industrial sectors, such as the notable case of environmental remediation. This review highlights the substantial potential of thermochemical valorized agri-food residues, transformed into biochar and hydrochar, as versatile adsorbents in wastewater treatment and as promising alternatives in various environmental and energy-related applications. These materials, with their enhanced properties achieved through tailored engineering techniques, offer competent solutions with cost-effective and satisfactory results in applications in various environmental contexts such as removing pollutants from wastewater or green energy generation. This sustainable approach not only addresses environmental concerns but also paves the way for a more eco-friendly and resource-efficient future, making it an exciting prospect for diverse applications.

Arsenic immobilization in soil affected by mining waste using waste-derived functional hydrochar and iron-encapsulated materials

Arsenic (As) contamination is a widespread problem. Continued and concerted effort in exploring sustainable remediation strategies is required, with in situ immobilization emerging as a promising option. This work valorized a waste by-product from olive (Olea europaea L.) milling into functional hydrochar (HC). The HC was then transformed into iron oxide-encapsulated carbon with three different iron loading rates (10, 25, and 50% w/w of iron chloride hexahydrate added to the olive mill waste feedstock). The HC and the three iron oxide-encapsulated carbon materials were then tested in a pot trial using a 3% w/w application rate as a means to immobilize As in a mining-contaminated soil (2,580 ± 110 mg kg^-1 As). After a 45-d incubation period, the effect of adding the amendments on As mobility and bioaccessibility compared with an untreated control was measured using a sequential extraction procedure and in vitro bioaccessibility, respectively. All four treatments resulted in a decrease in mobility and in vitro bioaccessibility as compared with the control. Specifically, As in the mobile phases was up to 35% less than the in control, whereas bioaccessibility was 21.8% in the control and ranged from 17.5 to 12.3% in the treatments. The efficiency of amendments to immobilize As increased with the iron content of the developed materials. This work positions HCs and iron oxide-encapsulated carbon materials produced from olive mill waste as promising options to immobilize As in situ.