Modeling of rapid temperature swing adsorption using hollow fiber sorbents

Recent advances in direct air capture by adsorption

Significant progress has been made in direct air capture (DAC) in recent years. Evidence suggests that the large-scale deployment of DAC by adsorption would be technically feasible for gigatons of CO₂ capture annually. However, great efforts in adsorption-based DAC technologies are still required. This review provides an exhaustive description of materials development, adsorbent shaping, in situ characterization, adsorption mechanism simulation, process design, system integration, and techno-economic analysis of adsorption-based DAC over the past five years; and in terms of adsorbent development, affordable DAC adsorbents such as amine-containing porous materials with large CO₂ adsorption capacities, fast kinetics, high selectivity, and long-term stability under ultra-low CO₂ concentration and humid conditions. It is also critically important to develop efficient DAC adsorptive processes. Research and development in structured adsorbents that operate at low-temperature with excellent CO₂ adsorption capacities and kinetics, novel gas-solid contactors with low heat and mass transfer resistances, and energy-efficient regeneration methods using heat, vacuum, and steam purge is needed to commercialize adsorption-based DAC. The synergy between DAC and carbon capture technologies for point sources can help in mitigating climate change effects in the long-term. Further investigations into DAC applications in the aviation, agriculture, energy, and chemical industries are required as well. This work benefits researchers concerned about global energy and environmental issues, and delivers perspective views for further deployment of negative-emission technologies.

Scalable Formation of Diamine-Appended Metal-Organic Framework Hollow Fiber Sorbents for Postcombustion CO2 Capture

We describe a straightforward and scalable fabrication of diamine-appended metal-organic framework (MOF)/polymer composite hollow fiber sorbent modules for CO₂ capture from dilute streams, such as flue gas from natural gas combined cycle (NGCC) power plants. A specific Mg-MOF, Mg₂(dobpdc) (dobpdc^4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate), incorporated into poly(ether sulfone) (PES) is directly spun through a conventional "dry-jet, wet-quench" method. After phase separation, a cyclic diamine 2-(aminomethyl)piperidine (2-ampd) is infused into the MOF within the polymer matrix during postspinning solvent exchange. The MOF hollow fibers from direct spinning contain as high as 70% MOF in the total fibers with 98% of the pure MOF uptake. The resulting fibers exhibit a step isotherm and a "shock-wave-shock" breakthrough profile consistent with pure 2-ampd-Mg₂(dobpdc). This work demonstrates a practical method for fabricating 2-ampd-Mg₂(dobpdc) fiber sorbents that display the MOF's high CO₂ adsorption capacity while lowering the pressure drop during operation.

Performance-Based Screening of Porous Materials for Carbon Capture

Computational screening methods have changed the way new materials and processes are discovered and designed. For adsorption-based gas separations and carbon capture, recent efforts have been directed toward the development of multiscale and performance-based screening workflows where we can go from the atomistic structure of an adsorbent to its equilibrium and transport properties at different scales, and eventually to its separation performance at the process level. The objective of this work is to review the current status of this new approach, discuss its potential and impact on the field of materials screening, and highlight the challenges that limit its application. We compile and introduce all the elements required for the development, implementation, and operation of multiscale workflows, hence providing a useful practical guide and a comprehensive source of reference to the scientific communities who work in this area. Our review includes information about available materials databases, state-of-the-art molecular simulation and process modeling tools, and a complete catalogue of data and parameters that are required at each stage of the multiscale screening. We thoroughly discuss the challenges associated with data availability, consistency of the models, and reproducibility of the data and, finally, propose new directions for the future of the field.

Tuning the selectivity of CO2 hydrogenation using ceramic hollow fiber catalytic modules

The unique structural features and advantageous pore distributions of alumina hollow fibers can be exploited to tune the selectivity in heterogeneous catalysis.

Dynamic Study of VSA and TSA Processes for VOCs Removal from Air

Volatile organic compounds are air pollutants that necessitate to be eliminated for health and environment concerns. In the present paper, two VOCs, that is, dichloromethane and acetone are recovered by adsorption on activated carbon from a nitrogen gas stream. Experimental adsorption isotherms of the two VOCs are determined at three different temperatures 298, 313, and 323 K by the dynamic column breakthrough method. The dynamic mathematical model succeeds to predict satisfactorily the experimental breakthrough curves for pure VOCs and different binary mixtures for various conditions. Thus, the validated dynamic mathematical model has been used as a simulation tool for optimization purposes of VSA and TSA processes in order to achieve the highest performances under the given constraints. The effects of the adsorption step duration, the vacuum pressure, and the desorption temperature on the recovery of dichloromethane and acetone have been studied. A recovery of 100% of the two VOCs could be attained. However, the adsorption step duration should be determined precisely so as not to affect the recovery and alter the quality of air being purified due to the breakthrough of VOCs. The vacuum pressure and the desorption temperature should be carefully chosen in order to both reduce the energy consumption and shorten the purge step duration. Regeneration by hot nitrogen stream seems to be more efficient than regeneration by reducing pressure.

Critical Comparison of Structured Contactors for Adsorption-Based Gas Separations

Recent advances in adsorptive gas separations have focused on the development of porous materials with high operating capacity and selectivity, useful parameters that provide early guidance during the development of new materials. Although this material-focused work is necessary to advance the state of the art in adsorption science and engineering, a substantial problem remains: how to integrate these materials into a fixed bed to efficiently utilize the separation. Structured sorbent contactors can help manage kinetic and engineering factors associated with the separation, including pressure drop, sorption enthalpy effects, and external heat integration (for temperature swing adsorption, or TSA). In this review, we discuss monoliths and fiber sorbents as the two main classes of structured sorbent contactors; recent developments in their manufacture; advantages and disadvantages of each structure relative to each other and to pellet packed beds; recent developments in system modeling; and finally, critical needs in this area of research.

In situ Formation of a Monodispersed Spherical Mesoporous Nanosilica-Torlon Hollow-Fiber Composite for Carbon Dioxide Capture

We describe a new template-free method for the in situ formation of a monodispersed spherical mesoporous nanosilica-Torlon hollow-fiber composite. A thin layer of Torlon hollow fiber that comprises silica nanoparticles was created by the in situ extrusion of a tetraethyl orthosilicate/N-methyl-2-pyrrolidone solution in a sheath layer and a Torlon polymer dope in a core support layer. This new method can be integrated easily into current hollow-fiber composite fabrication processes. The hollow-fiber composites were then functionalized with 3-aminopropyltrimethoxy silane (APS) and evaluated for their CO2 -capture performance. The resulting APS-functionalized mesoporous silica nanoparticles/Torlon hollow fibers exhibited a high CO2 equilibrium capacity of 1.5 and 1.9 mmol g(-1) at 35 and 60 °C, respectively, which is significantly higher than values for fiber sorbents without nanoparticles reported previously.