Cellulose-coated magnetic Janus nanoparticles for dewatering of crude oil emulsions

pH-Controllable Redox Responsive Amphiphilic Viologens for Switchable Emulsions

A pH and redox dual responsive amphiphilic viologen is synthesized, which can be reversibly transformed among the zwitterionic (SVa), monovalent anionic (SV+), and divalent anionic (SVH2+) forms upon pH variation, exhibiting pH-controllable redox responsive properties. Switchable Pickering emulsions with different droplet size and viscosity are prepared by the mixture of hydrophilic silica nanoparticles and the viologens (SV+ or SVH2+) at acidic conditions, while such combination yielded an oil-in-dispersion emulsion at neutral pH value. Not only can rapid reversible demulsification/stabilization of the Pickering emulsions be achieved by redox reactions, but the rate of redox-demulsification can also be controlled by pH trigger. The dual-responsive amphiphilic viologens have potential applications in developing intelligent colloid materials and molecular logic systems.

Synthesis and application of recyclable magnetic cellulose nanocrystals for effective demulsification of water in crude oil emulsions

The development of eco-friendly, efficient, and economical demulsifiers for the demulsification of water in crude oil emulsion is one of the important issues in the petroleum industry. Demulsifiers with suitable performance in several demulsification methods are good choices for effective and economical demulsification. In this study, recyclable magnetic cellulose nanocrystals have been synthesized from cotton by a simple method and used in the demulsification of water in crude oil emulsions. Chemical and magnetic demulsification by magnetic cellulose nanocrystals has been investigated. In addition, the effects of time, temperature, and demulsifier concentration on the demulsification efficiency have been evaluated. According to the results, this demulsifier can be used as an effective demulsifier for both chemical and magnetic demulsification and displayed a demulsification efficiency of 100 % at 50 °C without a magnet and 90 % at 20 °C with a magnet. The chemical demulsification efficiency of Fe3O4 nanoparticles was investigated and it showed lower DE compared to magnetic cellulose nanocrystals. The recyclability tests of the demulsifier indicated that magnetic cellulose nanocrystals can be used up to 4 times. Finally, the demulsification mechanism and interfacial tension measurements revealed that this demulsifier reduced the interfacial tension between water and crude oil and increased the water droplet sizes.

Preparation of magnetic Janus microparticles for the rapid removal of microplastics from water

The continuous spread of microplastics in aquatic environments poses a growing concern and a potential risk to human health. To address this concern, this paper presents a novel approach using magnetic Janus microparticles (MJMs) synthesized via a modified Pickering emulsion method with aminated Fe3O4@SiO2 as the raw material. The effectiveness of these MJMs in removing polystyrene (PS) and polyethylene (PE) microplastics from water was investigated. Paraffin was employed as the masking agent, while N-Octadecylphosphosphonic acid (PAC18) was used as the graft material for MJM preparation. The resulting particles exhibited a distinctive asymmetric flower-shaped structure on the surface, which was confirmed through various analytical techniques including FTIR, TGA, SEM, and water phase contact angle analysis. The MJMs demonstrated exceptional efficiency in adsorbing microplastics. With a microplastic suspension concentration of 2 mg/mL and an adsorbent dosage of 1 mg/mL, the MJMs can attain removal efficiencies of 92.08 % for PS and 60.67 % for PE in just 20 min of contact time. The effectiveness of the adsorption process was attributed to several factors, including hydrophobic interactions, cation-π interactions, electrostatic attraction, and the efficient dispersion of particles in water, as revealed by size distribution and zeta potential analysis. Additionally, kinetic and thermodynamic studies confirmed the remarkable adsorption rate and capacity of the MJMs (0.759 min-1 and 2.72 mg/mg for PS, 0.539 min-1 and 2.42 mg/mg for PE), highlighting their potential as a promising method for rapidly removing microplastics from water. This work provides valuable insights into the development of effective strategies for addressing microplastic pollution in aquatic environments.

Preparation of a demulsifier for oily wastewater using thorn fir bark as raw materials via a hydrothermal and solvent-free amination route

In current work, a TB-EDA demulsifier for disposing oily wastewater was prepared using thorn fir bark (TB) as starting materials via a hydrothermal and solvent-free amination route. Field emission scanning electron microscope (FE-SEM), energy dispersive X-ray spectrometer (EDS), and Fourier transform infrared spectroscope (FT-IR) were employed to characterize the TB-EDA demulsifier. Three-phase contact angle (CA), interfacial activity, formation of interfacial film (FIF), coalescence time of droplets (CTD), dynamic interfacial tension (IFT), and Zeta potential were carried out to study the possible demulsification mechanism. Bottle test was performed to investigate the effect of the TB-EDA dosage, salinity, and pH value on the demulsification performance at room temperature. Light transmittance (D_L) and oil removal rate (D_R) of separated water were 94.7% and 97.2%, respectively, with 100 mg/L of TB-EDA demulsifier in oily wastewater at room temperature. In addition, the TB-EDA demulsifier has an excellent salt tolerance even at the salinity of 50,000 mg/L. The corresponding D_L and D_R could reach 99.8% and 99.9%, respectively.

Adhesion-Shielding based synthesis of interfacially active magnetic Janus nanoparticles

HYPOTHESIS

A unique adhesion-shielding (AS)-based method could be used to manufacture magnetic Janus nanoparticles (IM-JNPs) of promising interfacial activities, asymmetric surface wettability, and great performance on deoiling from oily wastewater under the external magnetic field.

EXPERIMENTS

The IM-JNPs were characterized using scanning electron microscope (SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and Fourier-transform infrared spectroscopy (FTIR). The interfacial properties of IM-JNPs were investigated by the measurements of interfacial pressure-area isotherms (π-A), oil-water interfacial tension, and the related crumpling ratio. The Langmuir-Blodgett (L-B) technique was used to determine the asymmetric surface wettability of the IM-JNPs. The performance and recyclability of IM-JNPs for treating oily wastewater were also investigated.

FINDINGS

Using the proposed AS-based method, 17.9 g IM-JNPs were synthesized at a time and exhibited excellent interfacial properties, as indicated by decreasing oil-water interfacial tension from 38 to 27 mN/m. The crumpling behavior of the oil droplet further demonstrated the irreversible deposition of IM-JNPs at the oil droplet surfaces. The L-B technique and water contact angle measurement confirmed the asymmetric surface wettability of the IM-JNPs. The IM-JNPs were applied to successful removal of > 90% emulsified oil droplets from the household-produced oily wastewater under the external magnetic field while realizing facile recyclability and regeneration.