The effect of hydrodynamic cavitation on Microcystis aeruginosa: Physical and chemical factors

Removal of field-collected Microcystis aeruginosa in pilot-scale by a jet pump cavitation reactor

Hydrodynamic cavitation has been investigated extensively in the field of water treatment in the last decade and a well-designed hydrodynamic cavitation reactor is critical to the efficient removal of algal and large-scale application. In this paper, a jet pump cavitation reactor (JPCR) is developed for the removal of cyanobacteria Microcystis aeruginos in a pilot scale. The results demonstrate that the photosynthetic activity of M. aeruginosa is greatly inhibited immediately after treatment in the JPCR, and the growth is also hindered after 3 days culture. Moreover, a high cell disruptions of M. aeruginosa is detected after treated by JPCR. The release of chlorophyll-a indicates that the JPCR caused serious rupture to M. aeruginosa cells. The plausible cell disruption mechanisms are proposed in accordance with a fluorescence microscope and scanning electron microscope. Then, the optimization of cell disruption efficiency is also investigated for various operating conditions. The results showed that the algal cell disruption efficiency is improved at higher inlet pressure and the cavitation stage between the unstable limited operation cavitation stage and stable limited operation cavitation stage. The effect and optimization of JPCR on algal reduction are highlighted. The results of the study promote the application of hydrodynamic cavitation on algal removal and provide strong support for JPCR application in algal removal.

A review on hydrodynamic cavitation disinfection: The current state of knowledge

Disinfection, which aims to eliminate pathogenic microorganisms, is an essential step of water treatment. Hydrodynamic cavitation (HC) has emerged as a promising technology for large-scale disinfection without introducing new chemicals. HC, which can effectively induce sonochemistry by mechanical means, creates extraordinary conditions of pressures of ~1000 bar, local hotspots with ~5000 K, and high oxidation (hydroxyl radicals) in room environment. These conditions can produce highly destructive effects on microorganisms in water. In addition, the enhancements of chemical reactions and mass transfers by HC produce the synergism between HC and disinfectants or other physical treatment methods. HC is generated by hydrodynamic cavitation reactors (HCRs), therefore, their performance basically determines the effectiveness, economical efficiency, and applicability of HC disinfection. Therefore, developing high-performance HCRs and revealing the corresponding disinfection mechanisms are the most crucial issues today. In this review, we summarize the fundamental principles of HC and HCRs and recent development in HC disinfection. The energy release from cavitation phenomenon and corresponding mechanisms are elaborated. The performance (effectiveness, treatment ratio, and cost) of various HCRs, effects of treatment conditions on performance, and applicability of HC disinfection are evaluated and discussed. Finally, recommendations are provided for the future progress based on the analysis of previous studies.

Controlled Hydrodynamic Cavitation: A Review of Recent Advances and Perspectives for Greener Processing

The 20th century has witnessed a remarkable enhancement in the demand for varieties of consumer products, ranging from food, pharmaceutical, cosmetics, to other industries. To enhance the quality of the product and to reduce the production cost, industries are gradually inclined towards greener processing technologies. Cavitation-based technologies are gaining interest among processing technologies due to their cost effectiveness in operation, minimization of toxic solvent usage, and ability to obtain superior processed products compared to conventional methods. Also, following the recent advancements, cavitation technology with large-scale processing applicability is only denoted to the hydrodynamic cavitation (HC)-based method. This review includes a general overview of hydrodynamic cavitation-based processing technologies and a detailed discussion regarding the process effectiveness. HC has demonstrated its usefulness in food processing, extraction of valuable products, biofuel synthesis, emulsification, and waste remediation, including broad-spectrum contaminants such as pharmaceuticals, bacteria, dyes, and organic pollutants of concern. Following the requirement of a specific process, HC has been implemented either alone or in combination with other process-intensifying steps, for example, catalyst, surfactant, ultraviolet (UV), hydrogen peroxide (H2O2), and ozone (O3), for better performance. The reactor set-up of HC includes orifice, slit venturi, rotor-stator, and sonolator type constrictions that initiate and control the formation of bubbles. Moreover, the future directions have also been pointed out with careful consideration of specific drawbacks.

High-pressure jet-induced hydrodynamic cavitation as a pre-treatment step for avoiding cyanobacterial contamination during water purification

Due to specific physical properties, hydrodynamic cavitation (HC) is assigned to the powerful technologies for treating the biotic contamination in water including cyanobacteria. Contaminated water stream (CWS) can be cavitated directly by passing through some HC device, or indirectly when high-pressure jet stream (HPJS) is directed against its flow. Relatively small HPJS stream can thus treat a big volume of CWS in a short time or even work in continuous mode. Cyanobacteria floating in the CWS are forced to flow through the mixing cavitation zone. Within 2 h after single HC treatment, cyanobacterial cell suspensions showed disintegration of larger colonies and enhanced biomass sedimentation. Additional pre-treatment of CWS with low amounts of hydrogen peroxide (H₂O₂; 33, 66 and 99 μmol/L) enhanced the effect of HC and led to further inhibition of cyanobacterial photosynthesis (maximum quantum yield of photosystem II decreased by up to 60%). The number of cyanobacterial cells in the treated CWS decreased continuously over 48 and 72 h, though some cells remained alive and were able to recover photosynthetic activity. The technique proposed (direction of a HPJS against a CWS and pre-treatment with low H₂O₂ concentrations) provides (i) effective removal of cells from the water column, and (ii) reduced contamination by organic compounds released from the cells (especially cyanotoxins) as the cell membranes are not destroyed and the cells remain alive. This process shows potential as an effective pre-treatment step in water purification processes related to cyanobacterial contamination.

Regulation of nitrogen dynamics at the sediment–water interface during HAB degradation and subsequent reoccurrence

The effects of harmful algal blooms (HABs) on nutrient dynamics have been extensively studied; however, the response of nitrogen to continuous HAB degradation and subsequent reoccurrence is not well understood. Here, a small-scale experiment was conducted to assess how nitrogen in the sediment–water interface (SWI) responds to HAB degradation and subsequent reoccurrence at different initial algal densities. The results showed that during the algae decomposition stage, the NH₄⁺–N flux of the SWI remained positive but decreased with the increase in algal density from 3.5 × 10⁷ to 2.3 × 10⁸ cells per L, indicating that the sediment was the source of NH₄⁺–N. In contrast, the deposit was a sink of NO₃⁻–N. However, during the reoccurrence of HAB, the distribution of NH₄⁺–N and NO₃⁻–N fluxes was completely converted. Nitrogen flux analysis throughout algae decomposition and reoccurrence indicated that although the sediment acted as a sink of nitrogen, the flux was dependent on the initial algal density. Our results confirmed that algae decomposition and reoccurrence would greatly affect the nitrogen cycle of the SWI, during which dissolved oxygen (DO) and initial algal density dominated. This study is the first to show that the regulation of nitrogen flux and migration changes during continuous HAB decomposition and subsequent reoccurrence.

The effects of harmful algal blooms (HABs) on nutrient dynamics have been extensively studied; however, the response of nitrogen to continuous HAB degradation and subsequent reoccurrence is not well understood.

Plant and Biomass Extraction and Valorisation under Hydrodynamic Cavitation

Hydrodynamic cavitation (HC) is a green technology that has been successfully used to intensify a number of process. The cavitation phenomenon is responsible for many effects, including improvements in mass transfer rates and effective cell-wall rupture, leading to matrix disintegration. HC is a promising strategy for extraction processes and provides the fast and efficient recovery of valuable compounds from plants and biomass with high quality. It is a simple method with high energy efficiency that shows great potential for large-scale operations. This review presents a general discussion of the mechanisms of HC, its advantages, different reactor configurations, its applications in the extraction of bioactive compounds from plants, lipids from algal biomass and delignification of lignocellulosic biomass, and a case study in which the HC extraction of basil leftovers is compared with that of other extraction methods.

Central composite design parameterization of microalgae/cyanobacteria co-culture pretreatment for enhanced lipid extraction using an external clamp-on ultrasonic transducer

Lipids extracted from algal biomass could provide an abundant, rapidly growing, high yield feedstock for bio-diesel and other green fuels to supplement current fossil-based sources. Ultrasound pretreatment is a mechanical cell disruption method that has been shown to enhance lipid recovery from algae due to cavitation effects that disrupt algae cell walls. In this study, a locally grown mixture of Chlorella vulgaris/Cyanobacteria leptolyngbya was sonicated in an ultrasonic reactor with a clamp-on transducer prior to solvent lipid extraction. This configuration allows for a non-contact delivery method of ultrasonic energy with improved operational advantages (no fouling of transducer, continuous operation, and fully scalable design). A central composite design (CCD) was implemented to statistically analyze and evaluate the effect of ultrasonic power (350-750 W) and treatment time (5-30 min) on lipid yield. Lipid recovery was found to increase with both ultrasonic power and treatment time. Total lipid yields (on dry biomass basis) extracted via the Bligh and Dyer method from Chlorella vulgaris/cyanobacteria co-culture ranged from 8.3% for untreated algae to 16.9% for algae sonicated with 750 W power for 30 min, which corresponds to more than a doubling of lipid recovery due to ultrasound pretreatment. Increased power and treatment times were found to increase the degree of cell disruption as observed in the SEM and TEM images after ultrasonic pretreatment. Additionally, hexane (1:1 v/v) was evaluated as an alternative to the standard Bligh & Dyer (2:2:1.8 v/v/v chloroform/methanol/cell suspension) lipid extraction solvent system. On average, the Bligh and Dyer method extracted on average over twice the amount of lipids compared to hexane extraction. The lipid profile of the algae extracts indicates high concentrations of lauric acid (12:0), palmitic acid (16:0), stearic acid (18:0), oleic acid (18:1), and linoleic acid (18:2). This particular configuration of an ultrasonic system proved to be a viable method for the pretreatment of algae for enhanced lipid yields. Future research should focus on identifying alternative extraction solvents and expanding the range of treatment conditions to optimize the ultrasonic power and treatment times for maximum lipid recovery.

Mechanism of the influence of hydrodynamics on Microcystis aeruginosa, a dominant bloom species in reservoirs

Hydrodynamic conditions play a key role in algal blooms, which have become an increasing threat to aquatic environments, especially reservoirs. Microcystis aeruginosa is a dominant species in algal blooms in reservoirs and releases large amounts of algal toxins during algal bloom events. The algal growth characteristics and the corresponding mechanism of the influence of hydrodynamic conditions were explored using custom hydraulic rotating devices. The long-term experimental results were as follows: (1) a moderate flow velocity increased the algal growth rate and prolonged algal lifetime relative to static water; (2) moderate water turbulence promoted energy metabolism and nutrient absorbance in algal cells; (3) moderate shear stress reduced oxidation levels in algal cells and improved algal cell morphology; (4) under hydrodynamic treatment, algal cell deformation was confirmed by scanning electron microscopy (SEM), and a high shear stress of 0.0104 Pa induced by a flow of 0.5 m/s may have destroyed cell morphology and disturbed reactive oxygen species (ROS) metabolism; (5) algal cell morphology evaluation (including circle ratio, eccentricity, diameter increasing rate, and deformation rate) was established; (6) based on algal growth status and specific effects, five independent intervals (including 'positive-promotion', 'middle-promotion', 'negative-promotion', 'transition', and 'inhibition') and the hydrodynamic threshold system (including flow velocity, turbulent dissipation, and shear stress) were established; and (7) for M. aeruginosa, the optimum flow velocity was 0.24 m/s, and the static-equivalent flow velocity was 0.47 m/s. These results provide a basic summary of the hydrodynamic effects on algal growth and a useful reference for the control of M. aeruginosa blooms in reservoirs.

Study on characteristics of single cavitation bubble considering condensation and evaporation of kerosene steam under ultrasonic vibration honing

Ultrasonic vibration honing technology is an effective means for materials difficult to machine, where cavitation occurs in grinding fluid under the action of ultrasound. To investigate the changes of single cavitation bubble characteristics in the grinding area and how honing parameters influence bubble characteristics, a dynamic model of single cavitation bubble in the ultrasonic vibration honing grinding area was established. The model was based on the bubble dynamics and considered the condensation and evaporation of kerosene steam and honing processing environment. The change rules of bubble radius, temperature, pressure and number of kerosene steam molecules inside the bubble were numerically simulated in the process of bubble moving. The results show that the condensation and evaporation of kerosene steam can help to explain the changes of temperature and pressure inside the bubble. Compared with ultrasonic vibration, the amplitude of bubble radius is greatly suppressed in the ultrasonic honing environment. However, the rate of movement of the bubble is faster. Meanwhile, the minimum values of pressure and temperature are larger, and the number of kerosene steam molecules is less. By studying the effect of honing factors on the movement of the cavitation bubble, it is found that honing pressure has a greater influence on bubble evolution characteristics, while rotation speed of honing head has a minor effect and the reciprocating speed of honing head has little impacts.

Recent advances in ultrasonic treatment: Challenges and field applications for controlling harmful algal blooms (HABs)

Algal blooms are a naturally occurring phenomenon which can occur in both freshwater and saltwater. However, due to excess nutrient loading in water bodies (e.g. agricultural runoff and industrial activities), harmful algal blooms (HABs) have become an increasing issue globally, and can even cause health effects in humans due to the release of cyanotoxins. Among currently available treatment methods, sonication has received increasing attention for algal control because of its low impact on ecosystems and the environment. The effects of ultrasound on algal cells are well understood and operating parameter such as frequency, intensity, and duration of exposure has been well studied. However, most studies have been limited to laboratory data interpretation due to complicated environmental conditions in the field. Only a few field and pilot tests in small reservoirs were reported and the applicability of ultrasound for HABs prevention and control is still under question. There is a lack of information on the upscaling of ultrasonication devices for HAB control on larger water bodies, considering field influencing factors such as rainfall, light intensity/duration, temperature, water flow, nutrients loading, and turbidity. In this review article, we address the challenges and field considerations of ultrasonic applications for controlling algal blooms. An extensive literature survey, from the fundamentals of ultrasound techniques to recent ultrasound laboratory and field studies, has been thoroughly conducted and summarized to identify future technical expectations for field applications. Case studies investigating spatial distribution of frequency and pressure during sonication are highlighted with future implications.

Hydrodynamic cavitation: an emerging technology for the intensification of various chemical and physical processes in a chemical process industry

Hydrodynamic cavitation (HC) has been explored by many researchers over the years after the first publication on hydrolysis of fatty oils using HC was published by Pandit and Joshi [Pandit AB, Joshi JB. Hydrolysis of fatty oils: effect of cavitation. Chem Eng Sci 1993; 48: 3440–3442]. Before this publication, most of the studies related to cavitation in hydraulic system were concentrated to avoid the generation of cavities/cavitating conditions. The fundamental concept was to harness the energy released by cavities in a positive way for various chemical and mechanical processes. In HC, cavitation is generated by a combination of flow constriction and pressure-velocity conditions, which are monitored in such a way that cavitating conditions will be reached in a flowing system and thus generate hot spots. It allows the entire process to operate at otherwise ambient conditions of temperature and pressure while generating the cavitating conditions locally. In this review paper, we have explained in detail various cavitating devices and the effect of geometrical and operating parameters that affect the cavitation conditions. The optimization of different cavitating devices is discussed, and some strategies have been suggested for designing these devices for different applications. Also, various applications of HC such as wastewater treatment, preparation of nanoemulsions, biodiesel synthesis, water disinfection, and nanoparticle synthesis were discussed in detail.