Cosolubilization synergism occurrence in codesorption of PAH mixtures during surfactant-enhanced remediation of contaminated soil

Enhanced Solubilization and Biodegradation of HMW-PAHs in Water with a Pseudomonas mosselii-Released Biosurfactant

The treatment and reuse of wastewater are crucial for the effective utilization and protection of global water resources. Polycyclic aromatic hydrocarbons (PAHs), as one of the most common organic pollutants in industrial wastewater, are difficult to remove due to their relatively low solubility and bioavailability in the water environment. However, biosurfactants with both hydrophilic and hydrophobic groups are effective in overcoming these difficulties. Therefore, a biosurfactant-producing strain Pseudomonas mosselii MP-6 was isolated in this study to enhance the bioavailability and biodegradation of PAHs, especially high-molecular-weight PAHs (HMW-PAHs). FTIR and LC-MS analysis showed that the MP-6 surfactant belongs to rhamnolipids, a type of biopolymer, which can reduce the water surface tension from 73.20 mN/m to 30.61 mN/m at a critical micelle concentration (CMC = 93.17 mg/L). The enhanced solubilization and biodegradation of PAHs, particularly HMW-PAHs (when MP-6 was introduced), were also demonstrated in experiments. Furthermore, comprehensive environmental stress tolerance tests were conducted to confirm the robustness of the MP-6 biosurfactant, which signifies the potential adaptability and applicability of this biosurfactant in diverse environmental remediation scenarios. The results of this study, therefore, have significant implications for future applications in the treatment of wastewater containing HMW-PAHs, such as coking wastewater.

Effect of in situ mixed micellization of ester-functionalized gemini surfactant at different pHs on solubilization and cosolubilization of various polycyclic aromatic hydrocarbons of varying hydrophobicities

A pH controlled cleavability unfolds the 3-in-1 surfactant feature of an ester-bonded gemini surfactant, 2, 2'-[(oxybis (ethane-1,2-diyl))bis (oxy)]bis (N-hexadecyl-N,Ndimethyl-2-oxoethanaminium) dichloride (C16-C4O2-C16), by reinforcing in-situ mixed micellization between cleaved components at non-neutral pH (pH 3,12). The triplicity is assigned to two mixed-micelle variants at pH 3 and pH 12 besides the unhydrolyzed C16-C4O2-C16 at pH 7. The pH-controlled aggregation of such trichotomic surfactant dramatically enhances the micellar solubilization/cosolubilization of PAHs viz. naphthalene (Np), phenanthrene (Ph), pyrene (Py), perylene (Pe). The cosolubilization of binary/ternary PAH mixtures in such remarkable micellar assemblies at pH 3, 7 and 12 yields intriguing synergistic or antagonistic solubility outcomes correlated to PAH-PAH and PAH-micelle interactions. This study provides valuable insights into the potential applications of the ester-bonded gemini surfactant for the cosolubilization of undesirable hydrophobic compounds at natural sites having variable pH.

Growth and antioxidant response in Spirodela polyrrhiza under linear alkylbenzene sulfonate, naphthalene and their joint stress

The synthetic organic surfactants linear alkylbenzene sulfonate (LAS) and polycyclic aromatic hydrocarbon naphthalene (NAP), two common organic pollutants, are frequently detected in freshwater environments. However, the combined ecotoxicological risks associated with these pollutants have not been fully elucidated. The present study investigated the effects of individual and combined treatments of LAS and NAP on the growth and physiological responses of Spirodela polyrrhiza. The results showed that LAS was the main compound toxic to S. polyrrhiza in a dose-dependent manner. The peroxidase (POD) enzyme and catalase (CAT) enzyme are the main antioxidant enzymes protecting S. polyrrhiza from LAS stress. When exposed to NAP stress alone, only slightly reversible damage was observed as the exposure time was extended (14 days). The antioxidant enzyme systems (including superoxide dismutase (SOD), CAT and POD) showed positive responses. Synergistic effects were induced with LAS-NAP mixtures (≥ 5 + 5 mg L^-1), and LAS played a major toxic role. The POD enzyme was a sensitive protective enzyme in duckweed during the joint exposure to LAS + NAP. The results indicate that LAS or NAP may cause serious damage to S. polyrrhiza and aggravate ecotoxicity in aquatic ecosystems.

The response of polycyclic aromatic hydrocarbon degradation in coking wastewater treatment after bioaugmentation with biosurfactant-producing bacteria Pseudomonas aeruginosa S5

The polycyclic aromatic hydrocarbons (PAHs) that accumulate during the coking wastewater treatment process are hazardous for the surrounding environment. High molecular weight (HMW) PAHs account for more than 85% of the total PAHs in coking wastewater and sludge, respectively. The degradation of total PAHs increased by 18.97% due to the increased bioavailability of PAHs, after the biosurfactant-producing bacteria Pseudomonas aeruginosa S5 was added. The toxicity of total PAHs to humans was reduced by 26.66% after inoculation with S5. The results suggest biosurfactant-producing bacteria Pseudomonas aeruginosa S5 not only increase the biodegradation of PAHs significantly, but also have a better effect on reducing the human toxicity of PAHs. Kinetic analyses show that PAHs biodegradation fits to first-order kinetics. The degradation rate constant (k) value decreases as the number of PAH rings increases, indicating that HMW PAHs are more difficult to be biodegraded than low molecular weight (LMW) PAHs. The results indicate the bioaugmentation with the biosurfactant-producing strain has significant potential and utility in remediation of PAHs-polluted sites.

Enhancement of PAHs biodegradation in biosurfactant/phenol system by increasing the bioavailability of PAHs

The poor bioavailability of polycyclic aromatic hydrocarbons (PAHs) is the main limiting factor for their biodegradation in contaminated sites. The addition of biosurfactant is an effective method for enhancing the bioavailability of PAHs. Suitable low molecular weight (LMW) organic matters have been shown to increase the bioavailability of PAHs. Therefore, we investigated the effect of phenol, which often co-exists with PAHs, on the biodegradation of PAHs in biosurfactant solution. The results show that the critical micelle concentration (CMC) of the biosurfactant decreased after phenol was added. The formation of mixed micelles resulted in enhancement of PAHs dissolution. The weight solubilization ratio (WSR) values of biosurfactant for Phe, Pyr and BaP in phenol solution are approximately 1.34, 1.40 and 1.67 times that of the control group, respectively. Phenol, therefore, can assist biosurfactant to increase the availability of PAHs by microbes. The bioavailability of PAHs in sludge increased from 27.7% to 43.1% after the biosurfactant was added, and reached a maximum of 49.2%, following the simultaneous addition of phenol and biosurfactant. Phenol also improved the degradation of PAHs by Stenotrophomonas sp. N5 in biosurfactant solution.

Desorption process and morphological analysis of real polycyclic aromatic hydrocarbons contaminated soil by the heterogemini surfactant and its mixed systems

Surfactant-enhanced remediation (SER) is an efficient and low-cost technology for polycyclic aromatic hydrocarbons (PAHs) contaminated sites. This study assessed the desorption processes and effects of Heterogemini surfactant (Dodecyldimethylammonium bromide/tetradecyldimethylammonium bromide, DBTB), two traditional surfactants (Hexadecyl trimethyl ammonium bromide, CTAB; Sorbitan monolaurate, Span 20) and their mixed systems on the real PAHs-contaminated soil from an abandoned coking plant, as well they were analyzed micro morphologically. DBTB had greater desorption capability for PAHs and favorable interaction with the traditional surfactants confirmed by reaction parameters β^m and Gibbs. Whether for total PAHs (TPAHs) or different molecular weight PAHs, the mixed system Span 20/DBTB had larger molar solubilization ratio (MSR) and partition coefficient (K_m) than CTAB/DBTB, the highest desorption rate for TPAHs reaching 68.83%. Additionally, microscopic morphology showed micelles of Span 20/DBTB were more dispersed and formed strings easily, explaining its good desorption capability. What resulted demonstrated the feasibility of DBTB, a novel Heterogemini surfactant, and its mixed systems remediating PAHs-contaminated soil of abandoned industrial site.

Co-solubilization of polycyclic aromatic hydrocarbon mixtures in aqueous micellar systems and its correlation with FRET for enhanced remediation processes

Surfactant enhanced remediation (SER) is an effective approach for decontaminating the PAH polluted soils. Solubilization and Cosolubilization of Phenanthrene (Ph), Pyrene (Py) and Perylene (Pe) as single, binary and ternary mixtures have been studied employing cationic (CTAB), anionic (SDS), non-ionic surfactant (Brij 30) and block copolymer (P123) micelles. In the single solute solubilization studies, solubility of Pe follows the order Brij 30 > CTAB > SDS whereas Ph or Py followed the order of CTAB > Brij 30 > SDS. In the cosolubilization studies, an increase, decrease or no change in the mutual solubility of PAHs was observed. Synergism in solubilization was observed most in P123 in both binary and ternary PAH mixture where more PAHs could get solubilized in the dense micellar shell region, thereby enhancing the micellar core volume leading to enhanced solubilization of PAHs. The solubilizates as pairs (Ph-Pe and Py-Pe) were further tested for any possible energy transfer in presence of surfactant based restricted host environments using spectrofluorometry and spectrophotometry. Based on the solubilization and cosolubilization an efficient non-radiative energy transfer (FRET) was observed between Ph/Py (donor) and Pe (acceptor) in the non-ionic surfactant system as well as in CTAB-Brij 58 mixed system. The results of this work may improve the effective utilization of surfactants in their correct evaluation for the removal of PAHs from contaminated soils or aquifers treated with SER technology.

Transport potential of super-hydrophobic organic contaminants in anionic-nonionic surfactant mixture micelles

Surfactant mixtures are commonly used in agricultural and soil remediation applications, necessitating an understanding of their micellization behavior and associated impact on the fate of co-existing chemicals in the subsurface. A polymer-water sorption isotherm approach was shown to present an alternative to traditional methods for quantifying, understanding and predicting surfactant mixture properties. Micelle compositions were measured for anionic-nonionic surfactant mixtures. This is important since micelle composition can alter the apparent aqueous solubility of super-hydrophobic organic contaminants (SHOCs) resulting in surfactant facilitated transport (SFT). A key parameter in predicting SFT for SHOCs is their micelle-water partition constant (K_MI). These were determined for polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated biphenyls (PCBs) with representative anionic-nonionic surfactant mixtures using a polymer depletion method. These previously unreported constants were intermediate between those for pure anionic and nonionic surfactant solutions, with magnitude depending on micelle composition. Separate linear relationships were found between log K_MI and log K_OW for PCDDs and PCBs. This work provides new methods and preliminary results relating to binary surfactant mixtures (e.g. critical micelle concentration and micelle composition) and SHOCs (K_MI) that are important in the evaluation of the fate and transport of SHOCs in the subsurface environment and provide insight into the environmental mobility of these important contaminants.

A biosurfactant-producing Pseudomonas aeruginosa S5 isolated from coking wastewater and its application for bioremediation of polycyclic aromatic hydrocarbons

Although polycyclic aromatic hydrocarbons (PAHs) are considered as toxic and refractory pollutants, their biodegradation can be facilitated by biosurfactants. However, few studies have been performed to understand the potential isolation and application of biosurfactant-producing microorganism for promoting the in-situ removal of PAHs from wastewaters. In this work, a biosurfactant-producing strain S5 isolated from coking wastewater was identified as Pseudomonas aeruginosa. The biosurfactant produced by strain S5 was determined as glycolipid with a critical micelle concentration (CMC) of 96.5 mg/L, and reduced the surface tension from 72.2 to 29.6 mN/m. Addition indigenous P. aeruginosa S5 to coking wastewater effectively promoted the biodegradation of high weight molecular (HWM) PAHs (reduction from 9141.02 to 5117.16 µg/L in 15 days) in sludge phase. The results showed that the removal of PAHs in the sludge was enhanced by inoculating indigenous biosurfactant-producing microorganism in coking wastewater serving as an in-site remediation technology.

Surfactant-enhanced remediation of polycyclic aromatic hydrocarbons: A review

Polycyclic aromatic hydrocarbons (PAHs) are toxic, mutagenic and carcinogenic organic compounds that are widely present in the environment. The bioremediation of PAHs is an economical and environmentally friendly remediation technique, but it is limited because PAHs have low water solubility and fewer bioavailable properties. The solubility and bioavailability of PAHs can be increased by using surfactants to reduce surface tension and interfacial tension; this method is called surfactant-enhanced remediation (SER). The SER of PAHs is influenced by many factors such as the type and concentration of surfactants, PAH hydrophobicity, temperature, pH, salinity, dissolved organic matter and microbial community. Furthermore, as mixed micelles have a synergistic effect on PAH solubilisation, selecting the optimum ratio of mixed surfactants leads to effective PAH remediation. Although the use of surfactants inhibits microbial activities in some cases, this could be avoided by choosing an optimum combination of surfactants and a proper microbial community for the targeted PAH(s), resulting in up to 99.99% PAH removal. This article reviews the literature on SER of PAHs, including surfactant types, the synergistic effect of mixed micelles on PAH removal, the impact of surfactants on the PAH biodegradation process, factors affecting the SER process, and the mechanisms of surfactant-enhanced solubilisation of PAHs.

Drivers and applications of integrated clean-up technologies for surfactant-enhanced remediation of environments contaminated with polycyclic aromatic hydrocarbons (PAHs)

Surfactant-enhanced remediation (SER) is considered as a promising and efficient remediation approach. This review summarizes and discusses main drivers on the application of SER in removing polycyclic aromatic hydrocarbons (PAHs) from contaminated soil and water. The effect of PAH-PAH interactions on SER efficiency is, for the first time, illustrated in an SER review. Interactions between mixed PAHs could enhance, decrease, or have no impact on surfactants' solubilization power towards PAHs, thus affecting the optimal usage of surfactants for SER. Although SER can transfer PAHs from soil/non-aqueous phase liquids to the aqueous phase, the harmful impact of PAHs still exists. To decrease the level of PAHs in SER solutions, a series of SER-based integrated cleanup technologies have been developed including surfactant-enhanced bioremediation (SEBR), surfactant-enhanced phytoremediation (SEPR) and SER-advanced oxidation processes (SER-AOPs). In this review, the general considerations and corresponding applications of the integrated cleanup technologies are summarized and discussed. Compared with SER-AOPs, SEBR and SEPR need less operation cost, yet require more treatment time. To successfully achieve the field application of surfactant-based technologies, massive production of the cost-effective green surfactants (i.e. biosurfactants) and comprehensive evaluation of the drivers and the global cost of SER-based cleanup technologies need to be performed in the future.