Aerobic biodegradation of toluene-2,4-di(8:2 fluorotelomer urethane) and hexamethylene-1,6-di(8:2 fluorotelomer urethane) monomers in soils

Per- and polyfluoroalkyl substances (PFAS) as contaminants in groundwater resources - A comprehensive review of subsurface transport processes

Per- and polyfluorinated alkyl substances (PFAS) are persistent contaminants in the environment. An increased awareness of adverse health effects related to PFAS has further led to stricter regulations for several of these substances in e.g. drinking water in many countries. Groundwater constitutes an important source of raw water for drinking water production. A thorough understanding of PFAS subsurface fate and transport mechanisms leading to contamination of groundwater resources is therefore essential for management of raw water resources. A review of scientific literature on the subject of processes affecting subsurface PFAS fate and transport was carried out. This article compiles the current knowledge of such processes, mainly focusing on perfluoroalkyl acids (PFAA), in soil- and groundwater systems. Further, a compilation of data on transport parameters such as solubility and distribution coefficients, as well as, insight gained and conclusions drawn from the reviewed material are presented. As the use of certain fire-fighting foams has been identified as the major source of groundwater contamination in many countries, research related to this type of pollution source has been given extra focus. Uptake of PFAS in biota is outside the scope of this review. The review showed a large spread in the magnitude of distribution coefficients and solubility for individual PFAS. Also, it is clear that the influence of multiple factors makes site-specific evaluation of distribution coefficients valuable. This article aims at giving the reader a comprehensive overview of the subject, and providing a base for further work.

Development of a PFAS reaction library: identifying plausible transformation pathways in environmental and biological systems

Perfluoroalkyl and polyfluoroalkyl substances (PFAS) are used in many consumer applications due to their stain repellency, surfactant properties, ability to form water-proof coatings and use in fire suppression. The production, application, transport, use and disposal of PFAS and PFAS-treated products have resulted in their wide-spread occurrence in environmental and biological systems. Concern over exposure to PFAS and their transformation products and metabolites has necessitated the development of tools to predict the transformation of PFAS in environmental systems and metabolism in biological systems. We have developed reaction libraries for predicting transformation products and metabolites in a variety of environmental and biological reaction systems. These reaction libraries are based on generalized reaction schemes that encode the process science of PFAS reported in the peer-reviewed literature. The PFAS reaction libraries will be executed through the Chemical Transformation Simulator, a web-based tool that is available to the public. These reaction libraries are intended for predicting the environmental transformation and metabolism of PFAS only.

Per- and polyfluoroalkyl substances in the environment

Over the past several years, the term PFAS (per- and polyfluoroalkyl substances) has grown to be emblematic of environmental contamination, garnering public, scientific, and regulatory concern. PFAS are synthesized by two processes, direct fluorination (e.g., electrochemical fluorination) and oligomerization (e.g., fluorotelomerization). More than a megatonne of PFAS is produced yearly, and thousands of PFAS wind up in end-use products. Atmospheric and aqueous fugitive releases during manufacturing, use, and disposal have resulted in the global distribution of these compounds. Volatile PFAS facilitate long-range transport, commonly followed by complex transformation schemes to recalcitrant terminal PFAS, which do not degrade under environmental conditions and thus migrate through the environment and accumulate in biota through multiple pathways. Efforts to remediate PFAS-contaminated matrices still are in their infancy, with much current research targeting drinking water.

Fate and transport of per- and polyfluoroalkyl substances (PFASs) in the vadose zone

Per- and polyfluoroalkyl substances (PFASs) are a heterogeneous group of persistent organic pollutants that have been detected in various environmental compartments around the globe. Emerging research has revealed the preferential accumulation of PFASs in shallow soil horizons, particularly at sites impacted by firefighting activities, agricultural applications, and atmospheric deposition. Once in the vadose zone, PFASs can sorb to soil, accumulate at interfaces, become volatilized, be taken up in biota, or leach to the underlying aquifer. At the same time, polyfluorinated precursor species may transform into highly recalcitrant perfluoroalkyl acids, changing their chemical identity and thus transport behavior along the way. In this review, we critically discuss the current state of the knowledge and aim to interconnect the complex processes that control the fate and transport of PFASs in the vadose zone. Furthermore, we identify key challenges and future research needs. Consequently, this review may serve as an interdisciplinary guide for the risk assessment and management of PFAS-contaminated sites.

Remediation of poly- and perfluoroalkyl substances (PFAS) contaminated soils - To mobilize or to immobilize or to degrade?

Poly- and perfluoroalkyl substances (PFASs) are synthetic chemicals, which are introduced to the environment through anthropogenic activities. Aqueous film forming foam used in firefighting, wastewater effluent, landfill leachate, and biosolids are major sources of PFAS input to soil and groundwater. Remediation of PFAS contaminated solid and aqueous media is challenging, which is attributed to the chemical and thermal stability of PFAS and the complexity of PFAS mixtures. In this review, remediation of PFAS contaminated soils through manipulation of their bioavailability and destruction is presented. While the mobilizing amendments (e.g., surfactants) enhance the mobility and bioavailability of PFAS, the immobilizing amendments (e.g., activated carbon) decrease their bioavailability and mobility. Mobilizing amendments can be applied to facilitate the removal of PFAS though soil washing, phytoremediation, and complete destruction through thermal and chemical redox reactions. Immobilizing amendments are likely to reduce the transfer of PFAS to food chain through plant and biota (e.g., earthworm) uptake, and leaching to potable water sources. Future studies should focus on quantifying the potential leaching of the mobilized PFAS in the absence of removal by plant and biota uptake or soil washing, and regular monitoring of the long-term stability of the immobilized PFAS.

Photochemical transformation of perfluoroalkyl acid precursors in water using engineered nanomaterials

The production of perfluoroalkyl acids (PFAAs) has been phased out over recent decades; however, no significant decline in their environmental concentrations has been observed. This is partly due to the photochemical decomposition of PFAAs precursors (PrePFAAs) which remain in extensive use. The decomposition of PrePFAAs may be accelerated by the light-activated engineered nanomaterials (ENMs) in water. In light of this hypothesis, we investigated the photochemical transformation of three PrePFAAs, which are 8:2 fluorotelomer sulfonic acid (8:2 FTSA), 8:2 fluorotelomer alcohol (8:2 FTOH), and 2-(N-ethylperfluorooctane-1-sulfonamido ethyl] phosphate (SAmPAP), in the presence of six ENMs under simulated sunlight irradiation. The transformation rates of 8:2 FTSA and 8:2 FTOH were increased by 2-6 times when in the presence of six ENMs. However, most of ENMs appeared to inhibit the decomposition of SAmPAP. The transformation rates of PrePFAAs were found to depend on the yield of reactive oxygen species generated by ENMs, but the rates were also related to compound photo-stability, adsorption to surfaces, and photo-shielding effects. The PrePFAAs are transformed to perfluorooctanoic acid (PFOA) or/and perfluorooctane sulfonate (PFOS) with higher toxicity and longer half-life, PFOA or PFOS and a few PFAAs having shorter carbon chain lengths. Higher concentrations of the PFAAs photodegradation products were observed in the presence of most of the ENMs.

Characterizing and Comparing Per- and Polyfluoroalkyl Substances in Commercially Available Biosolid and Organic Non-Biosolid-Based Products

There is increasing concern over the presence of per- and polyfluoroalkyl substances (PFAS) in biosolids, while sales in commercially available biosolid-based products used as soil amendments are also increasing. Here, the occurrence of 17 perfluoroalkyl acids (PFAAs) present in 13 commercially available biosolid-based products, six organic composts (manure, mushroom, peat, and untreated wood), and one food and yard waste compost were studied. The PFAA concentration ranges observed are as follows: biosolid-based products (9.0-199 μg/kg) > food and yard waste (18.5 μg/kg) > other organic products (0.1-1.1 μg/kg). Analysis of 2014, 2016, and 2018 bags produced from one product line showed a temporal decrease in the total PFAAs (181, 101, and 74 μg/kg, respectively). The total oxidizable precursor (TOP) assay revealed the presence of PFAA precursors in the biosolid-based products at much higher levels, when the soluble carbon was removed by the ENVI-Carb clean-up prior to the TOP assay. Time-of-flight mass spectrometry confirmed the presence of three sulfonamides, two fluorotelomer sulfonates, and several polyfluoroalkyl phosphate diesters. Pore-water concentrations of water-saturated products were primarily of short-chain PFAAs and increased with increasing PFAA concentrations in the products. A strong positive log-linear correlation between organic carbon (OC)-normalized PFAA partition coefficients and the number of CF_n units indicates that OC is a good predictor of PFAA release concentrations.

Systems Biology Approach to Bioremediation of Nitroaromatics: Constraint-Based Analysis of 2,4,6-Trinitrotoluene Biotransformation by Escherichia coli

Microbial remediation of nitroaromatic compounds (NACs) is a promising environmentally friendly and cost-effective approach to the removal of these life-threating agents. Escherichia coli (E. coli) has shown remarkable capability for the biotransformation of 2,4,6-trinitro-toluene (TNT). Efforts to develop E. coli as an efficient TNT degrading biocatalyst will benefit from holistic flux-level description of interactions between multiple TNT transforming pathways operating in the strain. To gain such an insight, we extended the genome-scale constraint-based model of E. coli to account for a curated version of major TNT transformation pathways known or evidently hypothesized to be active in E. coli in present of TNT. Using constraint-based analysis (CBA) methods, we then performed several series of in silico experiments to elucidate the contribution of these pathways individually or in combination to the E. coli TNT transformation capacity. Results of our analyses were validated by replicating several experimentally observed TNT degradation phenotypes in E. coli cultures. We further used the extended model to explore the influence of process parameters, including aeration regime, TNT concentration, cell density, and carbon source on TNT degradation efficiency. We also conducted an in silico metabolic engineering study to design a series of E. coli mutants capable of degrading TNT at higher yield compared with the wild-type strain. Our study, therefore, extends the application of CBA to bioremediation of nitroaromatics and demonstrates the usefulness of this approach to inform bioremediation research.