Zirconium/polyvinyl alcohol modified flat-sheet polyvinyldene fluoride membrane for decontamination of arsenic: Material design and optimization, study of mechanisms, and application prospects

3D Hierarchical Porous and N-Doped Carbonized Microspheres Derived from Chitin for Remarkable Adsorption of Congo Red in Aqueous Solution

A novel adsorbent of N-doped carbonized microspheres were developed from chitin (N-doped CM-chitin) for adsorption of Congo red (CR). The N-doped CM-chitin showed spherical shape and consisted of carbon nanofibers with 3D hierarchical architecture. There were many micro/nano-pores existing in N-doped CM-chitin with high surface area (455.703 m² g^-1). The N element was uniformly distributed on the carbon nanofibers and formed with oxidize-N graphitic-N, pyrrolic-N, and pyridinic-N. The N-doped CM-chitin showed excellent adsorption capability for CR and the maximum adsorption amount was approximate 954.47 mg g^-1. The π-π/n-π interaction, hydrogen-bond interactions, and pore filling adsorption might be the adsorption mechanisms. The adsorption of N-doped CM-chitin was considered as a spontaneous endothermic adsorption process, and which well conformed to the pseudo-second-order kinetic and Langmuir isotherm model. The N-doped CM-chitin exhibited an effective adsorption performance for dynamic CR water with good reusability. Therefore, this work provides new insights into the fabrication of a novel N-doped adsorbent from low-cost and waste biomasses.

Enhanced sorption and reduction of Cr(VI) by the flowerlike nanocomposites combined with molybdenum disulphide and polypyrrole

Developing high-performance adsorbent for hexavalent chromium (Cr(VI)) elimination presents an enticing prospect in environmental remediation. Herein, three-dimensional flowerlike nanospheres composed of molybdenum disulphide and polypyrrole (MoS₂@PPy) were successfully prepared via a one-pot hydrothermal and subsequent carbothermal reduction process for the removal of Cr(VI). The effects of pH, adsorbent dosage, co-existing ions, initial Cr(VI) concentration and temperature were investigated systematically by batch experiments. Benefiting from the incorporation of MoS₂, the obtained MoS₂@PPy composites showed a dramatic increase of specific surface area (149.82 m²·g^-1) and adsorption capacity (230.97 mg·g^-1) when compared with the pure PPy nanoparticles. Based on the thermodynamics study and X-ray photoelectron spectroscopy analyses, the removal process of Cr(VI) was proved to be exothermic and spontaneous, and accessible under-coordinated Mo(IV) and pyrrolic N groups coupled with redox reactions were conducive to the efficient removal of Cr(VI). Attractively, the MoS₂@PPy acted as the electron donor could also activate peroxymonosulphate for the efficient degradation of organic contaminants. These results suggested that the MoS₂@PPy was promising in Cr(VI) elimination and other kinds of organic pollutants removal in wastewater.

Modification of polyvinylidene fluoride membrane by silver nanoparticles-graphene oxide hybrid nanosheet for effective membrane biofouling mitigation

Membrane biofouling poses severe impacts on the membrane lifespan and performance. In this study, a silver nanoparticles-graphene oxide hybrid nanosheet (AgNPs-GO) was synthesized as a bactericidal agent for effective membrane biofouling mitigation. The surface polymerization between polyvinyl alcohol (PVA) and AgNPs-GO nanosheet improved the stability of inorganic biocidal materials on the membrane surface and had a significant effect on the permeability and rejection performance of membranes. The PVA/AgNPs-GO modified hydrophilic polyvinylidene fluoride (H-PVDF) membrane exhibited an excellent anti-microbial activity in both static contact and filtration modes; nearly 100% inactivation of Pseudomonas aeruginosa in solution and 91% reduction in the membrane surface adhesion were found. The composite membrane with good stability and anti-microbial ability may offer an alternative to alleviate membrane biofouling problem.

Synthesis of graphene/SiO2@polypyrrole nanocomposites and their application for Cr(VI) removal in aqueous solution

A novel hybrid nanocomposite, polypyrrole nanoparticles (PPy) anchored on the graphene/silica nanosheets with the high specific surface area (polypyrrole-graphene/silica, GS-PPy), was synthesized by a facile in situ polymerization and shows great potential to remove hexavalent chromium [Cr(VI)] in aqueous solutions. Characterizations by XRD, TEM, SEM, BET, FT-IR and XPS, have confirmed that the PPy nanoparticles were well-distributed on the surface of GS nanosheets. The effects of pH, contact time, the concentration of Cr(VI), temperature, coexisting ions and the number of adsorption-desorption cycles were studied. The maximum adsorption capacity of the GS-PPy for Cr(VI) was 429.2 mg g^-1 at 298 K at pH 2, which was much higher than PPy nanoparticles and other related materials. The adsorption data fitted to the pseudo-second-order model and Langmuir isotherm model. The removal mechanism involved in electrostatic attraction, ion exchange and reduction process that partial adsorbed Cr(VI) was reduced to Cr(III). And Cr(III) was still retained on the surface of GS-PPy. The GS-PPy nanocomposite will be a potential candidate for the removal of Cr(VI) from the industrial waste water.

Highly selective determination of ultratrace inorganic arsenic species using novel functionalized miniaturized membranes

A simple method for highly selective determination of trace and ultratrace arsenic ions, i.e. arsenite and arsenate, was developed. The method is based on new miniaturized membranes, 5 mm diameter and 4.4 mg weight, which are prepared by synthesis of amorphous silica coating on cellulose fibers followed by the modification with (3-mercaptopropyl)-trimethoxysilane. The batch adsorption experiments show that membranes have high selectivity toward arsenite in the presence of heavy metals and anions that usually exist in natural water. Arsenite can be quantitatively adsorbed at pH 1 from 50 mL sample within 60 min using the miniaturized membrane with maximum adsorption capacity of 60 mg g^-1. The excellent adsorptive properties of membranes open the path to simple and selective determination of trace and ultratrace arsenite in water. Moreover, the membranes can be applied in the arsenic speciation due to their selectivity toward arsenite in the presence of arsenate. After adsorption, the arsenite retained onto the membrane is directly measured by energy-dispersive X-ray fluorescence spectrometry, avoiding elution step usually required in other spectroscopy techniques. The method is characterized by excellent enrichment factor of 972, detection limit of 0.045 ng mL^-1 and can be successfully applied in analysis of high salinity water, which is difficult to analyze by other spectroscopy techniques. The proposed method is a solvent-free approach based on the use of miniaturized membranes as sorbent followed by the direct measurement using a low-power X-ray spectrometer without either elution step or gas consumption during measurement. It can be considered as environmentally friendly and meets the standards of green analytical chemistry principles.

Treatment of lead contaminated water by a PVDF membrane that is modified by zirconium, phosphate and PVA

Lead contamination is one of the most serious problems in drinking water facing humans. In this study, a novel zirconium phosphate modified polyvinyl alcohol (PVA)-PVDF membrane was developed for lead removal. The zirconium ions and PVA were firstly coated onto a PVDF membrane through crosslinking reactions with glutaraldehyde, which was then modified by phosphate. The adsorption kinetics study showed that most of ultimate uptake occurred in 5 h. The adsorption increased with an increase in pH; the optimal adsorption was achieved at pH 5.5. The experimental data were better described by Langmuir equation than Freundlich equation; the maximum adsorption capacity was 121.2 mg-Pb/g at pH 5.5, much higher than other reported adsorptive membranes. The membrane exhibited a higher selectivity for lead over zinc with a relative selectivity coefficient (Pb(2+)/Zn(2+)) of 9.92. The filtration study showed that the membrane with an area of 12.56 cm(2) could treat 13.9 L (equivalent to 73,000 bed volumes) of lead containing wastewater with an influent concentration of 224.5 μ g/L to meet the maximum contaminant level of 15 μ g/L. It was demonstrated that the membrane did well in the removal of lead in both simulated wastewater and lead-spiked reservoir water and had a good reusability in its applications. The XPS studies revealed that the lead uptake was mainly due to cation exchange between hydrogen ions and lead ions.

Zirconium/PVA modified flat-sheet PVDF membrane as a cost-effective adsorptive and filtration material: A case study on decontamination of organic arsenic in aqueous solutions

Organic arsenic in waters has been a global concern in drinking water due to its higher toxicity to humans. In this study, a novel zirconium/polyvinyl alcohol (PVA) modified polyvinylidene fluoride (PVDF) membrane was applied to remove organic arsenic from water. The impregnation of zirconium ions within the modified membrane was attributed to the coordination reactions among the zirconium ions, ether and hydroxyl groups. The synthesized membrane worked better at the acidic conditions and achieved the optimal uptake for both monomethylarsonic (MMA) and dimethylarsinic (DMA) at pH 2.0. The adsorption isotherm study demonstrated that the adsorption of both organic arsenic species was controlled by the mono-layer adsorption process; the maximum adsorption capacities for MMA and DMA were 73.04 and 37.53mg/g at pH 2, and 29.78 and 19.03mg/g at pH 7.0, respectively. The presence of humic acid had a negligible impact on the uptake of organic arsenic, whereas varying impacts on the arsenic adsorption were observed due to the presence of coexisting anions such as fluoride, phosphate, carbonate and silicate. A single piece of membrane with a surface area of only 12.56cm(2) could treat 7.5-L MMA and 4.1-L DMA solution with an influent concentration of about 100μg/L to meet the WHO and USEPA standard of 10μg/L. Based on the XPS analyses, the ion exchange reaction between chloride ions on the membrane surface and organic arsenic species was responsible for the removal of both MMA and DMA.