Nontargeted detection and identification of (aromatic) amines in environmental samples based on diagnostic derivatization and LC-high resolution mass spectrometry

Investigation of occurrence of aromatic amines in municipal wastewaters using passive sampling

Aromatic amines (AAs) are human-made compounds known for their mutagenic properties, entering surface waters from various sources, often originating as transformation products of dyes or pesticides. Despite their low concentrations in surface waters, AAs can exhibit mutagenicity. Our study focused on evaluating three passive samplers (PSs) for enriching these compounds from influent and effluent of a wastewater treatment plant (WWTP) in Brno, Czech Republic. The PSs tested included variants containing AttractSPE™ SDB-RPS sorbent disk, one with and one without a diffusive agarose hydrogel layer, and a modified Speedisk (Bakerbond Speedisk® H2O-Philic). PSs were deployed in wastewater (WW) for one to four weeks in various overlapping combinations, and the uptake of AAs to PSs was compared to their concentrations in 24-hour composite water samples. A targeted LC/MS analysis covered 42 amines, detecting 11 and 13 AAs in daily composite influent and effluent samples, respectively. In the influent, AAs ranged from 1.5 ng L-1 for 1-anilinonaphthalene to 1.0 μg L-1 for aniline, and the highest concentration among all measured amines was observed for cyclohexylamine at 2.9 μg L-1. In the effluent, concentrations ranged from 0.5 ng L-1 for 1-anilinonaphthalene to 88 ng L-1 for o-anisidine. PSs demonstrated comparable accumulation of amines, with integrative uptake up to 28 days in both influent and effluent and detection of up to 23 and 27 amines in influent and effluent, respectively; altogether 34 compounds were detected in the study. Sampling rates (Rs) were estimated for compounds present in at least 50 % of the samples and showing <40 % aqueous concentration variability, with robustness evaluated by comparing values for compounds in WWTP influent and effluent. Although all devices performed similarly, hydrogel-based PS exhibited superior performance in several criteria, including time integration and robustness of sampling rates, making it a suitable monitoring tool for AAs in WW.

Comparison of gas chromatographic techniques for the analysis of iodinated derivatives of aromatic amines

Some aromatic amines (AA) have been classified as carcinogens to humans. After entering the body, mainly through tobacco smoke, they can be detected in urine. Thus, their trace analysis as biomarkers in biofluids is of high relevance and can be achieved with gas chromatography (GC-MS), usually after derivatization. This study compares three gas chromatographic methods for the analysis of ten iodinated derivatives of AA: GC-MS in single-ion monitoring (SIM) mode with (1) electron ionization (GC-EI-MS) and (2) negative chemical ionization (GC-NCI-MS), and (3) GC-EI-MS/MS in multiple reaction monitoring (MRM) mode using electron ionization. All methods and most analytes showed good coefficients of determination (R² > 0.99) for broad linear ranges covering three to five orders of magnitude in the picogram-per-liter to nanogram-per-liter range, with one and two exceptions for (1) and (2) respectively. Excellent limits of detection (LODs) of 9-50, 3.0-7.3, and 0.9-3.9 pg/L were observed for (1), (2), and (3) respectively, and good precision was achieved (intra-day repeatability < 15% and inter-day repeatability < 20% for most techniques and concentration levels). On average, recoveries between 80 and 104% were observed for all techniques. Urine samples of smokers and non-smokers were successfully analyzed, and p-toluidine and 2-chloroaniline could be found at significantly (α = 0.05) higher concentrations among smokers.

Utilization of 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F) as a fluorogenic reagent for the development of a spectrofluorometric assay method for taurine in energy drinks

The development of a simple, inexpensive, sensitive, and selective spectrofluorometric assay method for taurine in energy drinks utilizing 4-fluoro-7-nitro-2,1,3-benzoxadiazole as a fluorogenic agent is described. Conditions affecting the derivatization reaction are investigated and optimized. The optimal conditions are found to be as follows: buffer, pH 10; 4-fluoro-7-nitro-2,1,3-benzoxadiazoleconcentration, 0.05%; reaction time, 30 min; temperature, 50 °C. Fluorescence measurements are carried out at a wavelength of 542 nm, with excitation at a wavelength of 485 nm. The method is validated under the optimum conditions. The method is found to be linear in the range of 2.0–12.5 µg/mL, with a correlation coefficient of 0.9993. The limits of detection and quantification (µg/mL) are 0.6 and 2.02, respectively, which are appropriate for taurine assays in commercial energy drinks. In addition, the proposed method recorded excellent accuracy since the recovery values caused by presence of excipients are found to be in the range of 99.3%–102.87%. The values of relative standard deviation for intra- and inter-day precision were found to be in the ranges of 0.236%–0.659% and 2.12%–2.63%, respectively.

Three-pole wheel paddle luminescent metal organic frameworks (LMOFs) based on the oxygen substituted triazine tricarboxylic acid ligand: recognition and detection of small drug molecules and aromatic amine molecules

Luminescent metal organic frameworks (LMOFs) are considered to be a type of promising optical sensing material due to their designable and tunable functions, and stable pore structures. Therefore, the preparation of LMOFs has become a research hotspot in recent years. As we know, triazine carboxylic acid ligands are conducive for constructing LMOF materials due to their large π electron conjugated system. In this work, two crystalline materials [Cd₃(TCPT)₂]·0.5DMF·4H₂O (1) and (H₃O)[Zn₂(TCPT)(μ₂-OH)₂]·0.5DMF·3H₂O (2) were obtained by the reaction of the triazine carboxylic acid ligand 2,4,6-tris(4-carboxyphenoxy)-1,3,5-triazine (H₃TCPT), as an extended carboxylate arm, and d¹⁰ transition metal salts. Their structures were determined by single crystal X-ray diffraction and characterized by infrared spectroscopy (IR), ultraviolet visible spectroscopy (UV-vis), fluorescence spectroscopy, powder X-ray diffraction (PXRD) and thermogravimetric analysis (TG). The experimental results showed that complexes 1 and 2 show excellent fluorescent emission behavior. Thus, we explored their fluorescence sensing properties. To our delight, the results showed that they both had the ability to sense small organic drug molecules and aromatic amine molecules containing o-phenylenediamine (OPD), m-phenylenediamine (MPD) and p-phenylenediamine (PPD). In general, the practical applications of a MOF material are usually limited because of the relatively harsh synthesis methods. In this aspect, we studied the synthesis method in detail to obtain the optimal reaction conditions for the large-scale synthesis of 1 and 2. The preparation of the two LMOF materials only required about 3 hours of heating time and they could be prepared on a large scale, which is significant for the practical applications of LMOFs.

Profiles of primary aromatic amines, nicotine, and cotinine in indoor dust and associated human exposure in China

Despite the widespread use of primary aromatic amines (AAs) in consumer products, little is known about their prevalence in house dust. In this study, we investigated the occurrence of 35 AAs and two tobacco chemical markers (nicotine and its breakdown product cotinine) in 119 samples of house dust collected from five provinces in China. Ten of the 35 AAs and [nicotine and cotinine] were found in >80% and 100% of the samples, respectively, at concentration ranges of 29.1-19,200 (median: 700 ng/g) and 23.2-22,400 (4600) ng/g, respectively. Aniline was the predominant AA found in all dust samples (median: 257 ng/g). Dust samples from Henan and Shanxi provinces contained higher summed concentrations of the 10 AAs than those from Sichuan and Shandong, although the concentrations did not vary significantly among the five provinces (p > 0.05). A significant (p = 0.048), positive correlation (r = 0.882) existed between concentrations of nicotine and cotinine in dust samples. Similarly, concentrations of AAs were significantly correlated with those of nicotine in dust samples. Dyestuffs, rubber products, polyurethane foam and tobacco smoke are the major sources of AAs in the indoor environment. The estimated daily intakes (EDI) through dust ingestion ranged from 0.349 (adults) to 6.62 ng/kg-bw/day (toddlers) for AAs and from 1.27 to 51.1 ng/kg-bw/day for nicotine which are well below the current tolerable daily intakes.

A liquid chromatography-tandem mass spectrometry method for the analysis of primary aromatic amines in human urine

Aromatic amines are widely used in personal care products and human exposure to this class of chemicals is widespread. Bioanalytical methods to determine trace levels of aromatic amines in human urine are scarce. In this study, a liquid chromatography-tandem mass spectrometry (LC-MS/MS) method was developed to determine 39 primary aromatic amines (AAs) along with nicotine and cotinine in human urine. Chromatographic separation of the 41 analytes was achieved on an Ultra Biphenyl (100 mm × 2.1 mm, 5 µm) column. Mass spectrometry was operated in electrospray ionization positive ion multiple reaction monitoring (MRM) mode. The method exhibited excellent linear dynamic range (0.1-50 ng/mL) with correlation coefficients (r) > 0.999 for all analytes. Urine samples (2 mL) were hydrolyzed using 10 M NaOH at 95 °C for 15 h and target analytes were extracted using methyl-tert-butyl ether (MTBE). Addition of 15 µL of 0.25 M HCl to the sample extracts improved the recoveries of several target analytes. The method was validated through the analysis of fortified quality control (QC) samples and a certified standard reference material (SRM). Relative recoveries (%) of target analytes fortified in QC samples were in the range of 75-114% for 37 of the 41 analytes while the other analytes exhibited lower recoveries (16-74%). The limits of detection (LOD) and limits of quantification (LOQ) of target analytes were in the range of 0.025-0.20 ng/mL and 0.1-1.0 ng/mL, respectively. Intra-day and inter-day precision of the method assessed through the analysis of fortified urine QC samples at three different concentrations were < 11.7% and < 15.9% (measured as RSD), respectively. The method was applied in the analysis of urine samples from the general population and known smokers; aniline, para-anisidine, para-toluidine, ortho/meta-toluidine, 3-chloroaniline, 4-chloroaniline, 3,4-dichloroaniline, and 4,4'-methylenedianiline were found in all smoker's urine at sum concentrations ranging from 0.04 to 9.16 ng/mL.

Chemical labeling strategies for small molecule natural product detection and isolation

Covering: Up to 2020.It is widely accepted that small molecule natural products (NPs) evolved to carry out a particular ecological function and that these finely-tuned molecules can sometimes be appropriated for the treatment of disease in humans. Unfortunately, for the natural products chemist, NPs did not evolve to possess favorable physicochemical properties needed for HPLC-MS analysis. The process known as derivatization, whereby an NP in a complex mixture is decorated with a nonnatural moiety using a derivatizing agent (DA), arose from this sad state of affairs. Here, NPs are freed from the limitations of natural functionality and endowed, usually with some degree of chemoselectivity, with additional structural features that make HPLC-MS analysis more informative. DAs that selectively label amines, carboxylic acids, alcohols, phenols, thiols, ketones, and aldehydes, terminal alkynes, electrophiles, conjugated alkenes, and isocyanides have been developed and will be discussed here in detail. Although usually employed for targeted metabolomics, chemical labeling strategies have been effectively applied to uncharacterized NP extracts and may play an increasing role in the detection and isolation of certain classes of NPs in the future.

Nontarget Screening and Toxicity Evaluation of Diol Esters of Okadaic Acid and Dinophysistoxins Reveal Intraspecies Difference of Prorocentrum lima

High-resolution mass spectrometry (HRMS) analysis with the assistance of molecular networking was used to investigate intracellular toxin profiles of five Prorocentrum lima (P. lima) strains sampled from the north Yellow Sea and South China Sea. Mice were used as a model species for testing the acute toxicity of intracellular okadaic acid (OA) and dinophysistoxins (DTXs) in free and esterified states. Results showed that OA and DTX1 esterified derivatives were detected in all P. lima samples, accounting for 55%-96% of total toxins in five strains. A total of 24 esters and 1 stereoisomer of DTX1 (35S DTX1) were identified based on molecular networking and MS data analysis, 15 esters of which have been reported first. All P. lima strains displayed specific toxin profiles, and preliminary analysis suggested that toxin profiles of the five P. lima strains might be region-related. Moreover, acute toxicity in mice suggested higher toxicity of esters compared with free toxins, which highlights the importance and urgency of attention to esterified toxins in P. lima.

Fast-changing life-styles and ecotoxicity of hair dyes drive the emergence of hidden toxicants threatening environmental sustainability in Asia

The practice of hair dyeing is a rapidly expanding industry on a global scale; however, it has become a major concern for Asian countries because they have been undergoing rapid transformations of their environment and lifestyles. While the socio-economic benefits and impacts of this globalization trend are widely understood, the environmental effects are largely unknown. In particular, commonly available oxidative dyes potentially pose specific environmental risks due to their use of a toxic aromatic amine p-Phenylenediamine (PPD). In investigating the environmental impacts of PPD chemicals, we first provide context to the study by setting out the socio-psychological drivers to industrial expansion in Asian countries along with an overview of research into its effects, to show that its environmental impacts are under-researched. We then investigate the environmental toxicity of PPD by focusing on the role of microbes in metabolizing waste products. Results show that Acinetobacter baumannii EB1 isolated from dye effluent prevents autoxidation of PPD under oxygen-enriched (shaking) or oxygen-deficient (static) conditions representing different environmental settings. Microbes transformed PPD into more toxic metabolites, which then significantly reduced plant growth, thereby having a direct bearing on ecosystem services. Based on the findings, we argue that stricter regulatory controls on hair dye wastewater are necessary, particularly in newly industrialising Asian countries where the expansion of commercial practice is most prevalent.

A screen-printed electrode modified with silver nanoparticles and carbon nanofibers in a nafion matrix for ionic liquid-based dispersive liquid-liquid microextraction and voltammetric assay of heterocyclic amine 8-MeIQx in food

An electrochemical method is described for the determination of 2-amino-3,8-dimethylimidazo[4,5-f]quinoxaline (8-MeIQx) which is a heterocyclic aromatic amine formed in cooked food samples. The method uses a screen-printed carbon nanofiber electrode that is modified with silver nanoparticles (AgNPs) in a Nafion matrix. The surface of the modified electrode was characterized by UV-vis spectrometry, dynamic light scattering, scanning electron microscopy and Raman spectroscopy. The average size of the AgNPs is 14 nm. The modified electrode exhibits good properties in terms of reversibility, fast kinetics of electron transfer, and large electroactive area toward the reduction of 8-MeIQx. Differential pulse voltammetry is the most suitable electrochemical technique for quantification of 8-MeIQx, best at a voltage of -0.21 V (versus Ag reference electrode). The first derivative serves as the analytical signal that increases linearly in the 0.015-40 mg L^-1 8-MeIQx concentration range, with a 5 μg L^-1 detection limit. A dispersive liquid-liquid microextraction procedure assisted via ionic liquid was developed to isolate the analyte from real samples. The whole extraction-preconcentration and voltammetric method allows to determine 30 and 70 μg L^-1 in (spiked) bouillon cube, meat broth, beer and wine, with recoveries in the 93.6-110.4% range. Graphical abstractSchematic presentation for the analysis of aromatic amine 8-MeIQx, resultant compound from cooking meat. Extracted sample solution was placed onto modified electrode surface thus obtaining voltammetric analytical signal. So, quantification atrelevant levels can be performed.

A New Automated Method for the Analysis of Aromatic Amines in Human Urine by GC-MS/MS

Cigarette smoking significantly increases the risk of cancer and cardiovascular diseases as well as premature death. Aromatic amines (AAs) such as o-toluidine, 2-aminonaphthalene and 4-aminobiphenyl are found in cigarette smoke and are well-established human bladder carcinogens presumably acting via the formation of DNA adducts. These amines may be metabolized in the liver to acetylated or glucuronidated forms or oxidized to a hydroxylamine which may react with protein and DNA to form adducts. Free, acetylated and glucuronidated AAs are excreted in urine and can be measured as exposure biomarkers. Using isotope dilution GC-MS/MS, our laboratory quantifies six urinary AAs that are known or suspected carcinogens-o-toluidine, 2,6-dimethylaniline, o-anisidine, 1-aminonaphthalene, 2-aminonaphthalene and 4-aminobiphenyl-for large population studies such as the National Health and Nutrition Examination Survey (NHANES). We also monitor two additional corresponding structural isomers-2-aminobiphenyl and 3-aminobiphenyl-to verify isomer separation. A new and improved automated sample preparation method was developed to quantify these AAs, in which, sample cleanup was done via Supported Liquid Extraction (SLE+ ISOLUTE®) on a Hamilton STAR™ workstation. This automated method increased sample throughput by reducing sample cleanup time from 8 to 4 h while maintaining precision (intra and inter-run coefficient of variation <7%) and accuracy (±17%). Recent improvements in our GC/MS method have enhanced our assay sensitivity and specificity, resulting in longer analytical column life and maintaining or reducing the limit of detection for all six analytes. Indigo ASCENTTM software (3.7.1, Indigo BioAutomation, Inc.) is used for peak integration, calibration and quantification. A streamlined sample data flow was created in parallel with the automated method, in which samples can be tracked from receiving to final laboratory information management system output with minimal human intervention, minimizing potential human error. This newly validated, automated method and sample data flow are currently applied in biomonitoring of AAs in the US noninstitutionalized population NHANES 2013-2014 cycle.

Prioritization of highly exposable pharmaceuticals via a suspect/non-target screening approach: A case study for Yeongsan River, Korea

Pharmaceuticals and personal care products (PPCPs) in the Yeongsan River, Korea were prioritized via suspect and non-target analysis using LC-HRMS (QExactive plus Orbitrap) followed by semi-quantitative analysis to confirm the priority of PPCPs. A scoring and ranking system for prioritization was suggested based on occurrence frequency and chromatographic peak area or concentration. Through suspect and non-target screening, more than 50 PPCPs were tentatively identified and ranked by the scoring system. Among them, 28 substances were finally confirmed using reference standards. For estimating concentration, 26 confirmed PPCPs and 12 additional substances not included in the first ranking were semi-quantitatively analyzed. We found that carbamazepine, metformin, paraxanthine, naproxen, and fluconazole occurred 100% of the time above the limit of quantification in 14 samples, whereas carbamazepine, metformin, paraxanthine, caffeine, and cimetidine showed maximum concentrations above 1000 ng/L. Thus, in the final prioritization list, carbamazepine, metformin, and paraxanthine shared first place, followed by caffeine, cimetidine, lidocaine, naproxen, cetirizine, climbazole, fexofenadine, tramadol, and fluconazole, with scores of 100 or above. We suggest that these 12 PPCPs are the most highly exposable substances, and thus must be considered in future water monitoring in the Yeongsan River.

LC-HRMS Data Processing Strategy for Reliable Sample Comparison Exemplified by the Assessment of Water Treatment Processes

The behavior of micropollutants in water treatment is an important aspect in terms of water quality. Nontarget screening by liquid chromatography coupled to high-resolution mass spectrometry (LC-HRMS) offers the opportunity to comprehensively assess water treatment processes by comparing the signal heights of all detectable compounds before and after treatment. Without preselection of known target compounds, all accessible information is used to describe changes across processes and thus serves as a measure for the treatment efficiency. In this study, we introduce a novel LC-HRMS data processing strategy for the reliable classification of signals based on the observed fold changes. An approach for filtering detected features was developed and, after parameter adjustment, validated for its recall and precision. As proof of concept, the fate of 411 target compounds in a 0.1 μg/L standard mix was tracked throughout the data processing stages, where 406 targets were successfully recognized and retained during filtering. Potential pitfalls in signal classification were addressed. We found the recursive peak integration to be a key point for the reliable classification of signal changes across a process. For evaluating the repeatability, a combinatorial approach was conducted to verify the consistency of the final outcome using technical replicates of influent and effluent samples taken from an ozonation process during drinking water treatment. The results showed sufficient repeatability and thus emphasized the applicability of nontarget screening for the assessment of water treatment processes. The developed data processing strategies may be transferred to other research fields where sample comparisons are conducted.

Fluorescamine Labeling for Assessment of Protein Conformational Change and Binding Affinity in Protein-Nanoparticle Interaction

Protein adsorption alters the "biological identity" of nanoparticles (NPs) and could affect how biosystems respond to invading NPs. Study of protein-NP interaction can help understand how the physicochemical properties of NPs impact the interaction and thus potentially guide the design of safer and more effective NPs for biomedical or other applications. Binding affinity between proteins and NPs and the occurrence of protein conformational change upon binding to NPs are two important aspects to be learned, but few methods are currently available to assess both simultaneously in a simple way. Herein, we demonstrated that the fluorescamine labeling method developed by our group not only could reveal protein conformational change upon adsorption to NPs, owing to its capability to label the primary amines exposed on protein surface, but also could be applied to measure the binding affinity. By screening the interaction between a large number of proteins and four types of NPs, the present study also revealed that protein adsorption onto NPs could be strongly affected by structure flexibility. The proteins with high structure flexibility experienced high degrees of conformation change when binding to the polystyrene NPs, which could potentially influence protein function. Overall, we demonstrate that our assay is a quick, simple, and high-throughput tool to reveal potential impacts on protein activity and evaluate the strength of protein-NP binding.

Nontarget Screening with High Resolution Mass Spectrometry in the Environment: Ready to Go?

The vast, diverse universe of organic pollutants is a formidable challenge for environmental sciences, engineering, and regulation. Nontarget screening (NTS) based on high resolution mass spectrometry (HRMS) has enormous potential to help characterize this universe, but is it ready to go for real world applications? In this Feature article we argue that development of mass spectrometers with increasingly high resolution and novel couplings to both liquid and gas chromatography, combined with the integration of high performance computing, have significantly widened our analytical window and have enabled increasingly sophisticated data processing strategies, indicating a bright future for NTS. NTS has great potential for treatment assessment and pollutant prioritization within regulatory applications, as highlighted here by the case of real-time pollutant monitoring on the River Rhine. We discuss challenges for the future, including the transition from research toward solution-centered and robust, harmonized applications.

Identification of Mutagenic Aromatic Amines in River Samples with Industrial Wastewater Impact

Aromatic amines are one of the most important classes of compounds contributing to surface water mutagenicity due to their widespread occurrence as precursors and transformation products of dyes, pharmaceuticals, agrochemicals, and other compound classes. In this study, we implemented a workflow including novel analytical and data evaluation methods aiming to identify aromatic amines in six mutagenic wastewater effluents from a chemical-industrial area in Germany, collected by the passive sampler Blue Rayon. We identified 14 amines including the two potent mutagenic aromatic amines 2,3- and 2,8-phenazinediamine, which were reported for the first time as environmental contaminants. These two isomers accounted between 4.2 and 86% of the mutagenicity of the blue rayon extracts and may be byproducts of dye production at the studied site.

Mutagenicity in Surface Waters: Synergistic Effects of Carboline Alkaloids and Aromatic Amines

For decades, mutagenicity has been observed in many surface waters with a possible link to the presence of aromatic amines. River Rhine is a well-known example of this phenomenon but responsible compound(s) are still unknown. To identify the mutagenic compounds, we applied effect-directed analysis (EDA) utilizing novel analytical and biological approaches to a water sample extract from the lower Rhine. We could identify 21 environmental contaminants including two weakly mutagenic aromatic amines, and the known alkaloid comutagen norharman along with two related β-carboline alkaloids, carboline, and 5-carboline, which were reported the first time in surface waters. Results of mixture tests showed a strong synergism of the identified aromatic amines not only with norharman, but also with carboline and 5-carboline. Additionally, other nitrogen-containing compounds also contributed to the mutagenicity when aromatic amines were present. Thus, comutagenicity of β-carboline alkaloids with aromatic amines is shown to occur in surface waters. These results strongly suggest that surface water mutagenicity is highly complex and driven by synergistic mechanisms of a complex compound mixture (of which many are yet unidentified) rather than by single compounds. Therefore, mixture effects should be considered not only from mutagens alone, but also including possible comutagens and nonmutagenic compounds.