Integrating anammox with the autotrophic denitrification process via electrochemistry technology

Simultaneous ammonia and nitrate removal by novel integrated partial denitrification-anaerobic ammonium oxidation-bioelectrochemical system

The current study explored the performance of an integrated partial denitrification-anaerobic ammonium oxidation (anammox)-bioelectrochemical system on simultaneous removal of ammonia nitrogen and nitrate nitrogen. Different operational conditions were selected to optimize critical parameters of the process for improving nitrogen removal. The results indicated that more than 90 % of total inorganic nitrogen removal efficiency was achieved under the optimal conditions: ammonia nitrogen/nitrate nitrogen ratio of 1:2, external resistance of 200 Ω and inoculation volume ratio of anammox bacteria/denitrifying at 2:1. Improved nitrogen removal under the optimal conditions were confirmed by microbial community changes (Candidatus Brocadia and Thiobacillus) and enhanced of nitrogen metabolism-related genes (hao, hzsA/C and hdh). Increases of Limnobacter indicated an enhanced electron transfer efficiency. Overall, high-efficiency and stable nitrogen removal efficiency without nitrite nitrogen accumulation could be achieved by the integrated system under the optimal conditions, providing novel insights for simultaneous treatment of domestic wastewater and groundwater.

Exploring the potential of a novel alternating current stimulated iron‑carbon anammox process: A new horizon for nitrogen removal

This study explored a novel alternating current (AC) stimulation approach to enhance the nitrogen removal efficiency of an iron‑carbon based anammox (FeC anammox) system. In the preliminary experiment, the TN removal efficiency of the AC stimulated system was 8.06 % higher than that of a DC simulated system in same current densities of 0.25 mA/cm2. Gene expression analysis revealed that the AC-stimulated system, where, compared with the anammox system alone, the expression of HZS, HDH, NarG, NirS, NorB and NosZ increased by 1.81, 2.50, 1.64, 0.23, 1.15 and 1.27 times, respectively. In the continuous experiment, the TN removal rate increased from 60.13 % to 84.34 % after AC stimulation, and the working time of the FeC materials increased to 20 days. An analysis of the mechanism revealed that the parallel connection between the capacitive reactance and filler resistance in AC might reduce the internal resistance of the system, thereby improving the actual current density received by local microorganisms, and achieving a better strengthening effect.

Implemented impediment of extracellular electron transfer-dependent anammox process :Unstable nitrogen removal efficiency and decreased abundance of anammox bacteria

The present study investigates the extracellular electron transfer (EET)-dependent anammox process as a promising approach for sustainable wastewater treatment. The study examines the performance and metabolic pathway of the EET-dependent anammox process in comparison to the nitrite-dependent anammox process. The EET-dependent reactor successfully achieved nitrogen removal with a maximum removal efficiency of 93.2%, although it exhibited a lower ability to sustain high nitrogen removal load when compared to the nitrite-dependent anammox process, which poses opportunity and challenge for ammonia-wastewater treatment under applied voltage conditions. Nitrite was identified as a critical factor responsible for the changes in microbial community structure, resulting in a significant reduction in nitrogen removal load in the absence of nitrite. The study further suggests that the Candidatus Kuenenia species could dominate the EET-dependent anammox process, while nitrifying and denitrifying bacteria also contribute to the nitrogen removal in this system.

Bioelectrochemical system for nitrogen removal: Fundamentals, current status, trends, and challenges

Biological nitrogen removal (BNR) is essential for the treatment of nitrogen-containing wastewater. However, the requirement for aeration and the addition of external carbon sources, resulting in greenhouse gas emissions and additional costs, are disadvantages of the traditional BNR process. Alternative technologies have been devised to overcome these drawbacks. Bioelectrochemical nitrogen removal (BENR) has been proposed for efficient nitrogen removal, demonstrating flexibility and versatility. BENR can be performed by combining nitrification, denitrification, anaerobic ammonium oxidation (ANAMMOX), or organic carbon oxidation. Bioelectrochemical-ANAMMOX (BE-ANAMMOX) is the most promising method for nitrogen removal, as it can directly convert NH4+ to N2 and H2 in one step when the electrode is arranged as an electron acceptor. High-value-added hydrogen can potentially be recovered with efficient nitrogen removal using this concept, maximizing the benefits of BENR. Using alternative electron acceptors, such as electrodes and metal ions, for complete total nitrogen removal is a promising technology to substitute NO2- production from NH4+ oxidation by aeration. However, the requirement of electron donors for NO3- reduction, low NH4+ removal efficiency, and low competitiveness of exoelectrogenic bacteria still remain the main obstacles. The future direction for successful BENR should aim to achieve complete anaerobic NH4+ oxidation without any electron acceptor and to maximize selectivity in H2 production. Therefore, the bioelectrochemical pathways and balances between efficient nitrogen removal and high-value-added chemical production should be further studied for carbon and energy neutralities.

Enhancing Nitrogen Removal Efficiency and Anammox Metabolism in Microbial Electrolysis Cell Coupled Anammox Through Different Voltage Application

The slow growth and difficulty in cultivating anammox bacteria limit the rapid start-up of anammox process and effective microbial enrichment. In this study, microbial electrolysis cell (MEC) was coupled with anammox to investigate the effects of different applying voltage methods on substrate removal efficiency and rates, microbial community structure, anammox metabolism and metabolic pathways. The results showed that applying voltage not only improved NH₄⁺-N removal efficiency and removal rates, but also promoted electron transfer efficiency, key enzyme activity and extracellular polymeric substances (EPS) secretion in the systems. Step-up voltage was more conducive to the growth of Candidatus_Kuenenia in the cathode, which promoted the rapid start-up of anammox and treating wastewater with low ammonia concentration. The main metabolic pathway in step-up voltage operation was hydrazine to nitrogen, while in constant voltage operation was hydroxylamine oxidation pathway. These findings provide a new insight into the enhancement and operation of anammox system.

A. Jorand F, Barrière F, Etienne M. Challenges and Applications of Nitrate-Reducing Microbial Biocathodes

Bioelectrochemical systems which employ microbes as electrode catalysts to convert chemical energy into electrical energy (or conversely), have emerged in recent years for water sanitation and energy recovery. Microbial biocathodes, and especially those reducing nitrate are gaining more and more attention. The nitrate-reducing biocathodes can efficiently treat nitrate-polluted wastewater. However, they require specific conditions and they have not yet been applied on a large scale. In this review, the current knowledge on nitrate-reducing biocathodes will be summarized. The fundamentals of microbial biocathodes will be discussed, as well as the progress towards applications for nitrate reduction in the context of water treatment. Nitrate-reducing biocathodes will be compared with other nitrate-removal techniques and the challenges and opportunities of this approach will be identified.

Exerting applied voltage promotes microbial activity of marine anammox bacteria for nitrogen removal in saline wastewater treatment

To date, the application of marine anammox bacteria (MAB) is still a challenge in saline wastewater treatment due to the low growth rate and high sensitivity. Herein, bioelectrochemical system with applied voltage was exerted for the first time to promote the activity of MAB for removing nitrogen from saline wastewater. At the optimal voltage of 1.5 V, the mean total nitrogen removal rate (TNRR) reached the maximum of 0.65 kg/m³•d, which was 27.45% higher than that without applied voltage. Besides, applied voltage reduced the microbial diversity of MAB-based consortia, but the relative abundance of Candidatus Scalindua increased by 4.63% at 1.5 V compared with that without applied voltage. Also, proper applied voltage promoted the secretion of EPS and heme c, which resulted in the enhancement of MAB activity. Based on the remodified Logistic model analysis, the lag time of the nitrogen removal process was shortened by 0.72 h at the voltage of 1.5 V. Furthermore, it was found that higher voltage (> 2.0 V) had a negative effect on the MAB activity for low TNRR of 0.33 kg/m³•d (2.5 V). However, TNRR increased back to 0.61 kg/m³•d after removing the high applied voltage, which implied that the bioactivity was recoverable after being inhibited. These findings demonstrated that external electrical stimulation is an effective strategy to promote nitrogen removal and MAB activity for treating saline wastewater.

Challenges, solutions and prospects of mainstream anammox-based process for municipal wastewater treatment

Anaerobic ammonia oxidation (anammox) process has a promising application prospect for the mainstream deammonification of municipal wastewater due to its high efficiency and low energy consumption. In this paper, challenges and solutions of mainstream anammox-based process are summarized by analyzing the literature of recent ten years. Slow growth rate of anammox bacteria is a main challenge for mainstream anammox-based process, and enhancement of bacteria retention has been recognized to be necessary. Compared with directly increasing sludge retention time (SRT) with membrane bioreactors or sequencing batch reactors, culturing anammox bacteria in the form of biofilm or granule sludge is more promising for its feasibility of eliminating nitrite oxidizing bacteria (NOB). Besides, adding external electron donors or conductive materials and enriching the concentration of ammonia with absorption materials have also been proved helpful to improve the activity of anammox bacteria. Other challenges include the elimination of NOB and achieving ideal ratio of NH₄⁺ and NO₂^-. To solve these problems and achieve stable partial nitrification, composite control strategies based on low SRT and limited aeration are needed based on the special characteristics of ammonia oxidizing bacteria (AOB) and NOB. When treating actual wastewater, interference of low temperature and components in the influent is another problem. Relatively high activity of anammox bacteria has been realized after artificial acclimation at low temperature and the mechanism was also preliminary explored. Different pre-treatment sections have been designed to reduce the concentration of COD and S^2- from the influent. As for the nitrate produced by the anammox reaction, coupling processes are useful to reduce the concentration of nitrate in the effluent. In brief, suitable reactor and coupling process should be selected according to the temperature, influent quality and discharge targets of different regions. The future prospects of the mainstream anammox-based process are also put forward.

Novel biotechnologies for nitrogen removal and their coupling with gas emissions abatement in wastewater treatment facilities

Wastewaters contaminated with nitrogenous pollutants, derived from anthropogenic activities, have exacerbated our ecosystems sparking environmental problems, such as eutrophication and acidification of water reservoirs, emission of greenhouse gases, death of aquatic organisms, among others. Wastewater treatment facilities (WWTF) combining nitrification and denitrification, and lately partial nitrification coupled to anaerobic ammonium oxidation (anammox), have traditionally been applied for the removal of nitrogen from wastewaters. The present work provides a comprehensive review of the recent biotechnologies developed in which nitrogen-removing processes are relevant for the treatment of both wastewaters and gas emissions. These novel processes include the anammox process with alternative electron acceptors, such as sulfate (sulfammox), ferric iron (feammox), and anodes in microbial electrolysis cells (anodic anammox). New technologies that couple nitrate/nitrite reduction with the oxidation of methane, H₂S, volatile methyl siloxanes, and other volatile organic compounds are also described. The potential of these processes for (i) minimizing greenhouse gas emissions from WWTF, (ii) biogas purification, and (iii) air pollution control is critically discussed considering the factors that might trigger N₂O release during nitrate/nitrite reduction. Moreover, this review provides a discussion on the main challenges to tackle towards the consolidation of these novel biotechnologies.

Long-term domestication to Mn stresses alleviates the inhibition on anammox process

Heavy metals such as Mn²⁺ are common contaminants in ammonium-rich wastewater. The information of Mn²⁺ effect on anammox process needs further investigation. The short- and long-term effects of Mn²⁺ on anammox were explored by anammox granular sludge. Batch tests showed that the half inhibition value (IC₅₀ ) of Mn²⁺ was 4.83 mg/L. The anammox activity was severely inhibited in 0.5 hr under 15 mg/L Mn²⁺ . However, after long-term domestication by increasing the concentration of Mn²⁺ , both the low-load reactor (R1) and the high-load reactor (R2) performed well, achieving volumetric nitrogen removal rate of 6.36 kg/(m³ ·d) and 13.99 kg/(m³ ·d), respectively. The average ammonium and nitrite removal efficiency of both reactors under 200 mg/L Mn still maintained above 90%. The results from long-term reactors' operation showed that the serious inhibition effect indicated by the batch test was significantly exaggerated. The granules became dispersed after long-term operation in the high-load reactor (R2) which might be correlated to the high osmotic pressure caused by high Mn²⁺ load, and the mechanism needs to be investigated further. PRACTITIONER POINTS: The half inhibition value of Mn2+ on anammox sludge was 4.83 mg/L in batch experiment. 200 mg/L Mn2+ did not cause any inhibition on anammox process during long-term operation. Granular sludge is finer under high nitrogen loads with 200 mg/L Mn stress.

Bifunctional cathode using a biofilm and Pt/C catalyst for simultaneous electricity generation and nitrification in microbial fuel cells

Biofouling frequently causes catalyst deterioration at the cathode of microbial fuel cells (MFCs). A biofilm-covered Pt/C cathode (BPC) was fabricated via in situ cultivation of a biofilm on a Pt/C cathode (PC) in a dual-chambered MFC, which enables effective removal of NH4+-N and copious generation of electricity. Experimental results show 99% NH4+-N removal by the nitrifying bacteria that constitute 35.7% of all microorganisms on the BPC and a maximum BPC-MFC power density of 0.97 W/m2, which is comparable to that of PC-MFCs (0.99 W/m2). BPC biofilm size is restricted by the limited amount of organic material in the cathode chamber, which constrains the biomass to less than 0.3 g protein /m2. The bifunctional-cathode equipped MFC shows great promise as an energy-saving technology for wastewater treatment in the future.

Achieving stable two-stage mainstream partial-nitrification/anammox (PN/A) operation via intermittent aeration

The mainstream anammox process has attracted extensive attention recently. Compared to single-stage partial-nitrification/anammox (PN/A) system, two-stage PN/A process was more advantageous for achieving mainstream anammox. However, complex control strategy in partial-nitrification reactor (N-SBR) might not be feasible in practical application. The aim of this study was to provide an easy operation strategy to achieve two-stage PN/A process. Firstly, intermittent aeration was investigated to achieve 100% conversion of ammonium to nitrite in N-SBR. The effluent nitrite concentrations increased from 19.96 to 38.62 mg/L when intermittent aeration ratio (IAC) varied from 30 min/30 min-30 min/15 min. During 125 d's operation of N-SBR, stable partial nitrification performance was obtained through intermittent aeration, without coupling with low dissolve oxygen or short sludge retention time. Then, raw municipal wastewater was directly mixed with N-SBR effluent to provide suitable feed to anaerobic sequencing batch reactor (A-SBR).When the mixture ratio between the raw wastewater and the N-SBR effluent was 2.5, the effluent ammonium and total inorganic nitrogen (TIN) was only 0.97 and 2.52 mg N/L, respectively. Additionally, carbon-based pollutants was also removed in the proposed system without any pretreatment, which made the process easier to operate in practice.

Promoting the nitrogen removal of anammox process by Fe-C micro-electrolysis

In this study, a process that combines iron-carbon micro-electrolysis (IC-ME) with the anammox process was successfully established for promoting nitrogen removal, especially the removal of nitrate by-product. Compared with the conventional anammox process, the average total nitrogen removal efficiency of the combined system increased from 64.6% to 90.2% and 83.8% when the system was effectively operated for 4 days (Phase 2) and 13 days (Phase 3), respectively. In this combined system, IC-ME played a dual role: 1) converting the nitrate to ammonia as the nitrogen substrate for further degradation, and 2) producing Fe²⁺, Fe³⁺ and H₂ for the nitrogen removal processes of NH₄⁺ oxidation with Fe³⁺ reduction (Feammox), nitrate-dependent Fe²⁺ oxidation (NDFO), and denitrification, in addition to the anammox process. Microbial analysis using 16S rRNA high-throughput sequencing revealed Candidatus Kuenenia and Candidatus Brocadia as the major anammox genera, accounting for 1.01% and 0.15%, respectively.

Microbial recycling cells: First steps into a new type of microbial electrochemical technologies, aimed at recovering nutrients from wastewater

The aim of this work were to study terracotta-based porous air-water separators (4 mm thickness) in microbial recycling cells (MRCs) fed with cow manure (CM), swine manure (SM) and dairy wastewater (DW). Over 125 days, besides the removal of 60-90% of soluble-COD, considerable fractions of the main macronutrients (C, N, P, K, Fe, Mn, Ca, Mg) were removed from the wastewater and deposited on the terracotta separators as both inorganic salts and biomass deposits. Water evaporation at air-water interface as well as the high cathodic pH (10-12), induced by oxygen reduction to OH^-, were the predominant factors leading to precipitation. The separators were saturated of up to 10 g per kg of terracotta of the main macronutrients, with negligible concentrations of the main inorganic contaminants. These materials could be directly reused as nutrients-enriched solid conditioners for agricultural soils.