Reducing polycyclic aromatic hydrocarbon and its mechanism by porous alumina bed material during medical waste incineration

Conversion of medical waste into value-added products using a novel integrated system with tail gas treatment: Process design, optimization, and thermodynamic analysis

The COVID-19 pandemic has generated substantial medical waste (MW), posing risks to society. Based on widespread MW incineration, this study proposes an integrated system with tail gas treatment to convert MW into value-added products with nearly zero emissions. Herein, steam generators and supercritical CO₂ cycles were used to recover energy from MW to produce high-temperature/pressure steam and electricity. A simple power generation cycle achieved a net electricity efficiency of 22.4% through optimization. Thermodynamic analysis revealed that the most energy and exergy loss occurred in incineration. Furthermore, a pressurized reactive distillation column purified the resultant tail gas. The effects of inlet temperature, pressure, liquid/gas ratio, and recycle ratio on the removal and conversion efficiencies of NO₂ and SO₂ were evaluated. Nearly 100% of the SO₂ and 75% of the NO₂ generated by the incineration of MW have been converted into their acid forms. Based on the proposed tail gas treatment unit, high-purity CO₂ (∼98% purity) was finally obtained.

Application of Pyrolysis for the Evaluation of Organic Compounds in Medical Plastic Waste Generated in the City of Cartagena-Colombia Applying TG-GC/MS

In this study, the thermal degradation and pyrolysis of hospital plastic waste consisting of polyethylene (PE), polystyrene (PS), and polypropylene (PP) were investigated using TG-GC/MS. The identified molecules with the functional groups of alkanes, alkenes, alkynes, alcohols, aromatics, phenols, CO and CO2 were found in the gas stream from pyrolysis and oxidation, and are chemical structures with derivatives of aromatic rings. They are mainly related to the degradation of PS hospital waste, and the alkanes and alkenes groups originate mainly from PP and PE-based medical waste. The pyrolysis of this hospital waste did not show the presence of derivatives of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans, which is an advantage over classical incineration methodologies. CO, CO2, phenol, acetic acid and benzoic acid concentrations were higher in the gases from the oxidative degradation than in those generated in the pyrolysis with helium. In this article, we propose different pathways of reaction mechanisms that allow us to explain the presence of molecules with other functional groups, such as alkanes, alkenes, carboxylic acids, alcohols, aromatics and permanent gases.

A novel Diaphorobacter sp. strain isolated from saponification wastewater shows highly efficient phenanthrene degradation

Polycyclic aromatic hydrocarbons (PAHs), such as phenanthrene, are a type of organic pollutants that exist widely in the environment. Of the currently known degradation methods, bioremediation is a desirable and feasible option. A novel Diaphorobacter sp. Strain MNS-0 was isolated from saponification wastewater and showed the ability to degrade phenanthrene, fluorene, acenaphthene, anthracene, benzo[a]anthracene, or chrysene using phenanthrene as the sole carbon source. Gas chromatography mass spectroscopy analysis of catabolic intermediates indicates that phenanthrene degradation occurs through the phthalic acid pathway in strain MNS-0. Genome sequencing shows that strain MNS-0 has two plasmids and one chromosome containing a presumptive phenanthrene degradation gene cluster. Strain MNS-0 was able to completely degrade 100 mg/L phenanthrene within 40 h and tolerate up to 10 g/L NaCl at pH 9.0, while maintaining phenanthrene degradation activity. We thus propose that strain MNS-0 is an effective degrader for bioremediation of PAHs pollution, even in relatively harsh alkali environments such as saponification wastewater.

Kinetics Analysis of the NH3-SCR Denitration Reaction over Sintered Ore Catalysts

Utilizing sintered ore catalysts (SOC), which are used in the sintering industry for NH3-SCR denitration, is a feasible and economical way to reduce NOx emission in sintering flue gas. Therefore, in order to enhance the denitration efficiency of SOC, sintered ore modified by sulfuric acid and sulfated sintered ore catalysts (SSOC-5) were prepared. Kinetic analyses of these two catalysts for denitration were carried out in this study. On the basis of eliminating the influence of internal and external diffusion, the relationship between reactants and reaction rate was studied by a power function kinetic model. This clarified that the adsorption ability of the acid-modified catalyst for reaction gas adsorption was stronger than that of sintered ore catalysts, and the reaction rate was also accelerated. The NO, NH3 and O2 reaction orders of SOC were 1, 0.3 and 0.16 at 250~300 °C, while these values of SSOC-5 were 0.8, 0.06 and 0.09, respectively. The apparent activation energy of SOC was 83.66 kJ/mol, while the value of SSOC-5 decreased to 59.93 kJ/mol.

An assessment of hospital wastewater and biomedical waste generation, existing legislations, risk assessment, treatment processes, and scenario during COVID-19

Hospitals release significant quantities of wastewater (HWW) and biomedical waste (BMW), which hosts a wide range of contaminants that can adversely affect the environment if left untreated. The COVID-19 outbreak has further increased hospital waste generation over the past two years. In this context, a thorough literature study was carried out to reveal the negative implications of untreated hospital waste and delineate the proper ways to handle them. Conventional treatment methods can remove only 50%-70% of the emerging contaminants (ECs) present in the HWW. Still, many countries have not implemented suitable treatment methods to treat the HWW in-situ. This review presents an overview of worldwide HWW generation, regulations, and guidelines on HWW management and highlights the various treatment techniques for efficiently removing ECs from HWW. When combined with advanced oxidation processes, biological or physical treatment processes could remove around 90% of ECs. Analgesics were found to be more easily removed than antibiotics, β-blockers, and X-ray contrast media. The different environmental implications of BMW have also been highlighted. Mishandling of BMW can spread infections, deadly diseases, and hazardous waste into the environment. Hence, the different steps associated with collection to final disposal of BMW have been delineated to minimize the associated health risks. The paper circumscribes the multiple aspects of efficient hospital waste management and may be instrumental during the COVID-19 pandemic when the waste generation from all hospitals worldwide has increased significantly.

Vertical profile and assessment of soil pollution from a typical coking plant by suspect screening and non-target screening using GC/QTOF-MS

A comprehensive workflow for suspect screening and non-target screening with gas chromatography coupled with quadrupole time-of-flight mass spectrometry (GC/QTOF-MS) was used to characterize the pollution characteristics of soil samples in a typical coking plant in China. Suspect screening confirmed 57 chemicals including PAHs, alkyl PAHs, and phthalates contained in high-resolution personal compound database and library (PCDL). Non-target screening detected 88 chemicals from soil samples in the NIST 17 library. A total of 122 chemicals were screened in soil samples, and many of them were of emerging concern. Their presence in the soil obtained from coking operations has been underestimated, such as the oxygenated PAHs (naphtho[2,1-b]furan and 9H-fluoren-9-one), and the alkyl biphenyls compounds (4,4'-dimethylbiphenyl, 3,3'-dimethylbiphenyl, 4-methyl-1,1'-biphenyl and 2,2',5,5'-tetramethyl-1,1'-biphenyl). Toxicity assays by luminescent bacteria proved that the extracts from soil samples at different depths showed varying toxicity to V. qinghaiensis sp.-Q67. Soil extracts from a depth of 20-40 cm exhibited the greatest toxicity to luminescent bacteria compared with the other six-layered soil samples, which was correlated with the number of detectable pollutants and total organic carbon content. This study provided a screening method for suspect and non-target contaminants in urban industrial soil sites, which was important in identifying localized contamination sources.

Mapping healthcare waste management research: Past evolution, current challenges, and future perspectives towards a circular economy transition

Improper healthcare waste (HCW) management poses significant risks to the environment, human health, and socio-economic sustainability due to the infectious and hazardous nature of HCW. This research aims at rendering a comprehensive landscape of the body of research on HCW management by (i) mapping the scientific development of HCW research, (ii) identifying the prominent HCW research themes and trends, and (iii) providing a research agenda for HCW management towards a circular economy (CE) transition and sustainable environment. The analysis revealed four dominant HCW research themes: (1) HCW minimization, sustainable management, and policy-making; (2) HCW incineration and its associated environmental impacts; (3) hazardous HCW management practices; and (4) HCW handling and occupational safety and training. The results showed that the healthcare industry, despite its potential to contribute to the CE transition, has been overlooked in the CE discourse due to the single-use mindset of the healthcare industry in the wake of the infectious, toxic, and hazardous nature of HCW streams. The findings shed light on the HCW management domain by uncovering the current status of HCW research, highlighting the existing gaps and challenges, and providing potential avenues for further research towards a CE transition in the healthcare industry and HCW management.

Leaching characteristics and hazard evaluation of bottom ash generated from common biomedical waste incinerators

India has more than 202 biomedical waste incinerators, however, knowledge on the chemical characteristics of incinerator ash is lacking. The objective of this study was to evaluate the lecahablility characteristics of bottom ash and to study the levels of incineration by-products viz. polycyclic aromatic hydrocarbons (PAHs), and polychlorinated biphenyls (PCBs). Bottom ash samples from 13 common biomedical waste treatment facilities (CBMWTF) were colleted and subjected to leachig test, sequential extraction procedure (SEP) and PAHs and PCBs analysis. Among metals, cadmium, chromium, manganese, lead and zinc were found higher than the regulatory limits indicating its hazardous nature. SEP showed that substantial fraction of Cd (30%) and Zn (25%) were associated with leachable fractions, whereas metals such as Cr, Fe, Mn, and Ni were mainly associated with reducible, organics and residual fractions. Concentrations of USEPA 16 priority PAHs ranged between 0.17-12.67 mg kg^-1 and the total toxic equivalents (TEQ) were in the range of 0.9-421.9 ng TEQ/g. PAHs with 4-rings dominated all the samples and accounted for 68% to total PAHs concentrations. Concentration of Σ₁₉ PCB congeners ranged from 420.4 to 724.3 µg kg^-1. PCBs homologue pattern was dominated by mono- to tetra chlorinated congeners (60-86%). The findings indicate the need for segregation of plastics from biomedical waste, improvement of combustion efficiency, and efficient air pollution control devices for the existing incinerators in CBMWTFs.

A Model for Predicting Arsenic Volatilization during Coal Combustion Based on the Ash Fusion Temperature and Coal Characteristic

Arsenic emission from coal combustion power plants has attracted increasing attention due to its high toxicity. In this study, it was found that there was a close relationship between the ash fusion temperature (AFT) and arsenic distribution based on the thermodynamic equilibrium calculation. In addition to the AFT, coal characteristics and combustion temperature also considerably affected the distribution and morphology of arsenic during coal combustion. Thus, an arsenic volatilization model based on the AFT, coal type, and combustion temperature during coal combustion was developed. To test the accuracy of the model, blending coal combustion experiments were carried out. The experimental results and published data proved that the developed arsenic volatilization model can accurately predict arsenic emission during co-combustion, and the errors of the predicted value for bituminous and lignite were 2.3–9.8%, with the exception of JingLong (JL) coal when combusted at 1500 °C.

In-situ biodegradation of harmful pollutants in landfill by sludge modified biochar used as biocover

MSW landfill releases a lot of harmful pollutants such as H₂S, NH₃, and VOCs. In this study, two laboratory-scale biocovers such as biochar (BC) derived from agricultural & forestry wastes (AFW) pyrolysis, and sludge modified the biochar (SBC) were designed and used to remove the harmful pollutants. In order to understand in-situ biodegradation mechanism of the harmful pollutants by the SBC, the removal performances of the harmful pollutants together with the bacterial community in the BC and SBC were investigated in simulated landfill systems for 60 days comparing with the contrast experiment of a landfill cover soil (LCS). Meanwhile, the adsorption capacities of representative harmful pollutants (hydrogen sulfide, toluene, acetone and chlorobenzene) in the LCS, BC, and SBC were also tested in a fixed bed reactor. The removal efficiencies of the harmful pollutants by the SBC ranged from 95.43% to 100.00%, which was much higher than that of the LCS. The adsorption capacities of the harmful pollutants in the SBC were 4 times higher than that of the LCS since the SBC exhibited higher BET surface and N-containing functional groups. Meanwhile, the biodegradation rates of the harmful pollutants in the SBC were also much higher than that of the LCS since the populations of the bacterial community in the SBC were more abundant due to its facilitating the growth and activity of microorganisms in the porous structure of the SBC. In addition, a synergistic combination of adsorption and biodegradation in the SBC that enhanced the reproduction rate of microorganisms by consuming the absorbed-pollutants as carbon sources, which also contributed to enhance the biodegradation rates of the harmful pollutants.

Effect of Molybdenum on the Activity Temperature Enlarging of Mn-Based Catalyst for Mercury Oxidation

The MnO2/TiO2 (TM5) catalyst modified by molybdenum was used for mercury oxidation at different temperatures in a fixed-bed reactor. The addition of molybdenum into TM5 was identified as significantly enlarging the optimal temperature range for mercury oxidation. The optimal mercury oxidation temperature of TM5 was only 200 °C, with an oxidation efficiency of 95%. However, the mercury oxidation efficiency of TM5 was lower than 60% at other temperatures. As for MnO2–MoO3/TiO2 (TM5Mo5), the mercury oxidation efficiency was above 80% at 200–350 °C. In particular at 250 °C, the mercury oxidation efficiency of TM5Mo5 was over 93%. Otherwise, the gaseous O2, which could supplement the lattice oxygen in the catalytic reaction, played an important role in the process of mercury oxidation over TM5Mo5. The results of X-ray photoelectron spectroscopy (XPS) suggested that mercury oxidized by O2 over TM5Mo5 followed the Mars–Maessen mechanism.

Dynamic assessment of economic and environmental performance index and generation, composition, environmental and human health risks of hospital solid waste in developing countries; A state of the art of review

Many studies have been conducted on hospital solid waste management (HSWM) throughout the world, especially developing countries. This interdisciplinary study aims to summarize the available knowledge on the health and environmental risks of hospital solid waste (HSW) and also, develop a dynamic associational assessment among hospital solid waste generation rate (HSWGR), hospital solid waste composition (HSWC), gross domestic product (GDP) per capita, and environmental performance index (EPI) in some developing countries for the first time. The results of this study showed that researchers from India, China, Pakistan, Brazil, and Iran had found more evidence about the health, economic, and environmental issues in HSW than the other developing countries. The literature showed that the highest and lowest reported HSWGR (in national average level) belonged to Ethiopia (6.03) and India (0.24) kg bed ^-1 day^-1, respectively. It has also been shown that all studied countries except Serbia, have higher levels of hazardous waste in their HSWC, based on the WHO's standard. Furthermore, the quantity and quality of HSW in developing countries depend on the service provided by the hospital, type of hospital, HSWM system, and the level of regional economic and culture. The association analysis showed that the EPI and GDP per capita of developing countries were significantly (p-value <0.05) associated with HSWGR, non-hazardous HSW, and hazardous HSW by the Spearman coefficients equal to 0.389, 0.118, -0.118, and 0.122, 0.216, and -0.346, respectively. However, it can be concluded that GDP per capita and EPI have a weak correlation with hazardous HSW and non-hazardous HSW. Moreover, HSW has many hazardous health and environmental risks such as dioxin and furan, that must be controlled and managed through implementing programs and policies based on sustainable development. As a final point, we believed that the present study can be considered to be a guide for future studies on HSWM in developing countries.

Polycyclic aromatic hydrocarbon (PAHs) geographical distribution in China and their source, risk assessment analysis

In China, the huge amounts of energy consumption caused severe carcinogenic polycyclic aromatic hydrocarbon (PAHs) concentration in the soil and ambient air. This paper summarized that the references published in 2008-2018 and suggested that biomass, coal and vehicular emissions were categorized as major sources of PAHs in China. In 2016, the emitted PAHs in China due to the incomplete combustion of fuel was about 32720 tonnes, and the contribution of the emission sources was the sequence: biomass combustion > residential coal combustion > vehicle > coke production > refine oil > power plant > natural gas combustion. The total amount of PAHs emission in China at 2016 was significantly decreased due to the decrease of the proportion of crop resides burning (indoor and open burning). The geographical distribution of PAHs concentration demonstrated that PAHs concentration in the urban soil is 0.092-4.733 μg/g. At 2008-2012, the serious PAHs concentration in the urban soil occurred in the eastern China, which was shifted to western China after 2012. The concentration of particulate and gaseous PAHs in China is 1-151 ng/m3 and 1.08-217 ng/m3, respectively. The concentration of particle-bound PAHs in the southwest and eastern region are lower than that in north and central region of China. The incremental lifetime cancer risk (ILCR) analysis demonstrates that ILCR in the soil and ambient air in China is below the acceptable cancer risk level of 10-6 recommended by US Environmental Protection Agency (EPA), which mean that there is a low potential PAHs carcinogenic risk for the soil and ambient air in China.

An integrative process of the simultaneous catalytic oxidation of NO, Hg0 and toluene from sintering flue gas by the natural ferrous manganese ore

An integrative process of the simultaneous catalytic oxidation of NO, Hg⁰ and toluene from sintering flue gas by the natural ferrous manganese ore was studied in fixed bed reactor and in situ DRIFTS.