Enhanced photocatalytic New Coccine degradation and Pb(II) reduction over graphene oxide-TiO2 composite in the presence of aspartic acid-β-cyclodextrin

Removal of contaminants present in water and wastewater by cyclodextrin-based adsorbents: A bibliometric review from 1993 to 2022

Cyclodextrin (CD), a cyclic oligosaccharide from enzymatic starch breakdown, plays a crucial role in pharmaceuticals, food, agriculture, textiles, biotechnology, chemicals, and environmental applications, including water and wastewater treatment. In this study, a statistical analysis was performed using VOSviewer and Citespace to scrutinize 2038 articles published from 1993 to 2022. The investigation unveiled a notable upsurge in pertinent articles and citation counts, with China and USA contributing the highest publication volumes. The prevailing research focus predominantly revolves around the application of CD-based materials used as adsorbents to remove conventional contaminants such as dyes and metals. The CD chemistry allows the construction of materials with various architectures, including cross-linked, grafted, hybrid or supported systems. The main adsorbents are cross-linked CD polymers, including nanosponges, fibres and hybrid composites. Additionally, research efforts are actually concentrated on the synthesis of CD-based membranes, CD@graphene oxide, and CD@TiO2. These materials are proposed as adsorbents to remove emerging pollutants. By employing bibliometric analysis, this study delivers a comprehensive retrospective review and synthesis of research concerning CD-based adsorbents for the removal of contaminants from wastewater, thereby offering valuable insights for future large-scale application of CD-based adsorption materials.

Repeated fluctuation of Cu2+ concentration during photocatalytic purification of SMZ-Cu2+ combined pollution: Behavior, mechanism and application

Although the effect of Cu²⁺ on antibiotic removal during photocatalytic reaction has been studied in depth, there is less known about the effect of antibiotics on Cu²⁺ removal. In this study, we report for the first time that, during the photocatalytic purification of sulfamerazine (SMZ) and Cu²⁺ combined pollution, Cu²⁺ concentration showed an obvious five-stage fluctuation, which was completely different from the simple promotion or inhibition reported in previous studies. By employing HPLC-MS analysis and density functional theory (DFT) calculation, the repeated fluctuation of Cu²⁺ concentration was found to be closely related to the SMZ degradation process, mainly resulting from solution pH drop and formation of Cu-containing intermediates which acted as sacrificial agents for Cu²⁺ reduction. In addition, compared with the SMZ-free system, the presence of SMZ can greatly enhance the deep removal of Cu²⁺ (minimum Cu²⁺ concentration was only 0.17 mg/L vs. 1.28 mg/L without SMZ), and there was a wide time interval to ensure the efficient recovery of Cu metal. More interestingly, the in-situ obtained Cu-decorated TiO₂ photocatalyst performed well in water splitting, nitrogen fixation and bacterial sterilization. Results of this study confirmed the great potential of photocatalytic technology in purifying antibiotic-heavy metal combined pollution.

Ternary Ca-Mg-Al layered double-hydroxides for synergistic remediation of As, Cd, and Pb from both contaminated soil and groundwater: Characteristics, effectiveness, and immobilization mechanisms

Layered double hydroxides (LDH) are the cost-effective and high-efficiency materials for remediation of potentially toxic elements (PTEs) in contaminated soil and groundwater. Herein, the effectiveness and mechanisms of a ternary Ca-Mg-Al LDH (CMAL) for the synergistic remediation of As, Cd, and Pb were investigated in contaminated soils and simulative groundwaters for the first time. The immobilization efficiencies of As, Cd, and Pb in both black soil (BS) and red soil (RS) amended by CMAL at 5 wt% were all > 75%. CMAL amendment transferred more mobile As, Cd, and Pb fractions in soils to immobile species than did Ca-Al LDH and Mg-Al LDH treatments. Furthermore, using a pump-and-treat technology, 82-98% of these 3 PTEs from contaminated groundwater were successfully immobilized in both CMAL treated BS and RS top-soils. Meanwhile, leaching of Ca, Mg, and Al from CMAL was minimal indicating the material was stable. The excellent immobilization performance of CMAL for these PTEs was attributed to the coating of soil microparticles by CMAL nanosheets that allowed complexation of Ca-O-As/Cd or Mg-O-As/Cd/Pb formation, co-precipitation of Ca/Fe-As and Cd(OH)₂, and formation of Ca-bridged ternary complex (FeO-Ca-As/Cd). The adverse effect of oppositive pH/Eh-dependence between As and Cd/Pb was overshadowed by these mechanisms and thus allowed As immobilization. Immobilization of As, Cd, and Pb by CMAL amendment was more favorable for RS soil due to its lower reduction potential and more participation of metal-(hydr)oxides for complexation. Overall, the ternary-LDH is a promising synergistic remediation strategy for multi-PTEs contaminated soil and groundwater.

Graphene-based photocatalytic nanocomposites used to treat pharmaceutical and personal care product wastewater: A review

Photocatalytic technology has been widely studied by researchers in the field of environmental purification. This technology can not only completely convert organic pollutants into small molecules of CO₂ and H₂O through redox reactions but also remove metal ions and other inorganic substances from water. This article reviews the research progress of graphene-based photocatalytic nanocomposites in the treatment of wastewater. First, we elucidate the basic principles of photocatalysis, the types of graphene-based nanocomposites, and the role of graphene in photocatalysis (e.g., graphene can accelerate the separation of photon-hole pairs and increase the intensity and range of light absorption). Second, the preparation, characterization, and application of composites in wastewater are introduced. We also discuss the kinetic model of the photocatalytic degradation of pollutants. Finally, the enhancement mechanism of graphene in terms of photocatalysis is not completely clear, and graphene-based photocatalysts with high catalytic efficiency, low cost, and large-scale production have not yet appeared, so there is an urgent need for more extensive and in-depth research.

A new insight on enhanced Pb(II) removal by sludge biochar catalyst coupling with ultrasound irradiation and its synergism with phenol removal

The applicability of sludge biochar catalyst (SBC) coupling with ultrasound (US) irradiation for the simultaneous removal of Pb(II) and phenol was firstly investigated in this study. Results indicate that Pb(II) removal of SBC/US process was superior to that of SBC without US. The inhibitory order of the coexisting anions on Pb(II) removal was PO43- > HCO3- > NO3- > F- > SO42- > Cl-. Also, several coexisting metals ions inculding Cr(VI), Ni(II) and Cu(II) could be removed in a simultaneous manner with Pb(II). A high removal performance of Pb(II) by SBC/US process and its synergism with phenol oxidation had been successfully achieved. The simultaneous removal efficiencies of Pb(II) and phenol were high up to 95% within 60 min at optimum reaction conditions. Four kinds of Pb species inculding Pb0, PbCO3, PbO and Pb(OH)2 were formed during the reaction, whereas five kinds of transformation compounds of phenol such as 1,4-benzoquinone, acetic acid, formic acid, maleic acid and propionic acid were detected. Both HO and O2- contributed to the oxidation of phenol by SBC/US process, but HO was dominant radical. A reaction mechanism for the synergistic removal of Pb(II) and phenol by SBC/US process involving in four stages-namely adsorption, precipitation, reduction and Fenton-like oxidation processes was proposed. This study demonstrates that SBC/US process could be considered as a potential candidate for the remediation of real wastewaters containing Pb(II) and phenol.

Cyclodextrin-based adsorbents for the removal of pollutants from wastewater: a review

Water is a vital substance that constitutes biological structures and sustains life. However, water pollution is currently among the major environmental challenges and has attracted increasing study attention. How to handle contaminated water now mainly focuses on removing or reducing the pollutants from the wastewater. Cyclodextrin derivatives, possessing external hydrophilic and internal hydrophobic properties, have been recognized as new-generation adsorbents to exert positive effects on water pollution treatment. This article outlines recent contributions of cyclodextrin-based adsorbents on wastewater treatment, highlighting different adsorption mechanisms of cyclodextrin-based adsorbents under different influencing factors. The crosslinked and immobilized cyclodextrin-based adsorbents all displayed outstanding adsorption capacities. Particularly, according to specific pollutants including metal ions, organic chemicals, pesticides, and drugs in wastewater, this article has classified and organized various cyclodextrin-based adsorbents into tables, which could pave an intuitive shortcut for designing and developing efficient cyclodextrin-based adsorbents for targeted wastewater pollutants. Besides, this article specially discusses cost-effectiveness and regeneration performance of current cyclodextrin-based adsorbents. Finally, the challenges and future directions of cyclodextrin-based adsorbents are prospected in this article, which may shed substantial light on practical industrial applications of cyclodextrin-based adsorbents.

Enhanced photocatalytic degradation of organic dyes by ultrasonic-assisted electrospray TiO2/graphene oxide on polyacrylonitrile/β-cyclodextrin nanofibrous membranes

Polyacrylonitrile (PAN)/β-cyclodextrin (β-CD) composite nanofibrous membranes immobilized with nano-titanium dioxide (TiO₂) and graphene oxide (GO) were prepared by electrospinning and ultrasonic-assisted electrospinning. Scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), and X-ray diffraction (XRD) confirmed that TiO₂ and GO were more evenly dispersed on the surface and inside of the nanofibers after 45 min of ultrasonic treatment. Adding TiO₂ and GO reduced the fiber diameter; the minimum fiber diameter was 84.66 ± 40.58 nm when the mass ratio of TiO₂-to-GO was 8:2 (PAN/β-CD nanofibrous membranes was 191.10 ± 45.66 nm). Using the anionic dye methyl orange (MO) and the cationic dye methylene blue (MB) as pollutant models, the photocatalytic activity of the nanofibrous membrane under natural sunlight was evaluated. It was found that PAN/β-CD/TiO₂/GO composite nanofibrous membrane with an 8:2 mass ratio of TiO₂-to-GO exhibited the best degradation efficiency for the dyes. The degradation efficiency for MB and MO were 93.52 ± 1.83% and 90.92 ± 1.52%, respectively. Meanwhile, the PAN/β-CD/TiO₂/GO composite nanofibrous membrane also displayed good antibacterial properties and the degradation efficiency for MB and MO remained above 80% after 3 cycles. In general, the PAN/β-CD/TiO₂/GO nanofibrous membrane is eco-friendly, reusable, and has great potential for the removal of dyes from industrial wastewaters.

Study on Simultaneous Removal of Dye and Heavy Metal Ions by NiAl-Layered Double Hydroxide Films

Herein, nickel-aluminum-layered double hydroxide (NiAl-LDH) films were prepared by the hydrothermal method. Based on the photoinduced reduction ability and degradation of LDHs on heavy metal ions and organic compounds, NiAl-LDH films displayed favorable simultaneous removal performance. Benefiting from the electron traps of heavy metals reduced from solution, the coexisting metal ions improved the photocatalytic activity of NiAl-LDH films on methyl orange. The higher the Fermi level of coexisting metal ion was, the higher the photocatalytic degradation rate of methyl orange obtained. Meanwhile, the removal rates of heavy metal ions (Ag⁺, Pb²⁺, and Cu²⁺) from wastewater were both enhanced and could reach 95%. NiAl-LDH films showed affinity toward Ag⁺. Furthermore, NiAl-LDH films are tightly coupled with the substrate, providing active sites and a simple method for the catalyst recovery. This study provides new insights into the simultaneous removal of heavy metal ions and organic pollutants using LDH films.

Capability of Bacillus Subtilis to remove Pb2+ via producing lipopeptides

Lead contamination is widely found in soil and waters, which makes great threat to animal and human health. Environmentally friendly, efficient, and economical methods for the removal of Pb²⁺ pose significant challenges for environmental protection. Bacillus subtilis lipopeptide was firstly used to remove Pb²⁺ from water. In mechanisms, the lipopeptides formed complexes and chelated with Pb²⁺ via OH, CO, OCO, and NH. In kinetics, the Pb²⁺ removal process closely followed a pseudo-first-order model, and the equilibrium Pb²⁺ adsorption capacity ranged from 112.6 to 113.7 mg/g within a temperature range of 293.13-313.13 K. The Pb²⁺ removal process could be well described by a Langmuir isotherm. The maximum Pb²⁺ removal capability of lipopeptides was 164.4 mg/g in manually metal contaminated water and 130.4 mg/g in actual wastewater. Furthermore, the lipopeptides can not only decrease the amount of lead in oats grown, but also promote oat growth under Pb²⁺ stress. The results showed that lipopeptides can be used as a highly efficient adsorbent to remove Pb²⁺ from water, which means the great potential of lipopeptides in practical environments.

Adsorption of dichromate ions from aqueous solution onto magnetic graphene oxide modified by β-cyclodextrin

In this work, the β-cyclodextrin modified magnetic graphene oxide (β-CD/MGO) composite was fabricated by the in situ co-precipitation method and characterized by Fourier transform-infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometer (VSM), and particle size analysis. The adsorption behavior of dichromate ions on the β-CD/MGO was investigated, and the mechanism of adsorption was also studied using FT-IR and XPS. The results from SEM and TEM showed that the graphene oxide (GO) layer became rough, and many fine particles were attached after compounding with ferroferric oxide and β-cyclodextrin. The characterization results of FT-IR and XPS show that that β-cyclodextrin and ferroferric oxide have been perfectly compounded to the graphene oxide layer and β-CD/MGO has a particle size of about 460 nm, a specific surface area of 252.3 m²g^-1, and a saturation magnetization of 73.5 emu g^-1. The adsorption amount of dichromate ions on the β-CD/MGO is affected by pH, adsorbent dosage, and adsorption time. Kinetic studies showed that the adsorption process followed a pseudo-second-order kinetic model. Equilibrium data agreed very well with the Langmuir model, the maximum adsorption amount of dichromate ions on the β-CD/MGO was 49.95 mg g^-1. After five successive adsorbent reuses, the reuse rate is still 73%, indicating the excellent potential reusability of β-CD/MGO adsorbent. β-CD/MGO exhibits excellent adsorption performance for dichromate ions. As an environmentally friendly magnetic adsorbent, β-CD/MGO is suitable for the treatment of dichromate-containing wastewater.

Preparation and surface engineering of CM-β-CD functionalized Fe3O4@TiO2 nanoparticles for photocatalytic degradation of polychlorinated biphenyls (PCBs) from transformer oil

The aim of the present research is to investigate the efficiency of surface-modified magnetic nanoparticles for photocatalytic degradation of PCBs from transformer oil. Therefore, CMCD-Fe₃O₄@TiO₂ was successfully produced via grafting of carboxymethyl-β-cyclodextrin (CM-β-CD) onto the core-shell titania magnetic nanoparticles surface. The photocatalytic efficiency of CMCD-Fe₃O₄@TiO₂ for degradation of PCBs was systematically evaluated using an experimental design and the process parameters were optimized by response surface methodology (RSM). The central composite design (CCD) with four experimental parameters was used successfully in the modeling and optimization of photocatalytic efficiency in removing PCBs from transformer oil. ANOVA analysis confirmed a high R-squared value of 0.9769 describing the goodness of fit of the proposed model for the significance estimation of the individual and the interaction effects of variables. The optimal degradation yields of PCBs was achieved 83 % at a temperature of 25 °C, time of 16 min, the dosage of the catalyst of 8.35 mg and oil: ethanol ratio of 1:5. These findings encourage the practical use of CM-β-CD-Fe₃O₄@TiO₂ as a promising and alternative photocatalyst on an industrial scale for the cleaning of organic pollutants such as PCBs due to its environmental friendliness, the benefit of magnetic separation and good reusability after five times.

Accelerated photoelectron transmission by carboxymethyl β-cyclodextrin for organic contaminants removal: An alternative to noble metal catalyst

Applications of noble metal decorated photocatalytic nanomaterials are restricted by its high cost. In this study, carboxymethyl β-cyclodextrin (CM-β-CD), as an alternative to gold nanoparticle, was used to modified titanium dioxide (CM-β-CD-P25) to accelerate photoelectron transmission and enhance the organic contaminants removal from water. Several of emerging organic contaminants, such as bisphenol A (BPA), phenol and sulphanilamide (SA), were used to evaluate their photocatalytic activities. Carboxymethyl-β-cyclodextrin not only provide hydrophobic sites to entrap organic contaminants but also provide a "bridge" for accelerated transmission of photogenerated charges without introducing the recombination interface. Consequently, 91.6 % of BPA, 71.9 % of phenol and 97.1 % of SA could be removed by CM-β-CD-P25(2:1) under 1 h UV light irradiation. The photooxidation rate constant of BPA, phenol and SA by CM-β-CD-P25(2:1) were 0.039 min^-1, 0.021 min^-1 and 0.062 min^-1, respectively, which are much higher than that of pristine P25 and Au-P25. Moreover, the photocatalytic activity of CM-β-CD-P25(2:1) remains almost unchanged in repeated cycle test owing to its high stability. The reasonable mechanism of CM-β-CD-P25 were investigated. CM-β-CD-P25 hybrid nanoparticles completely surpasses Au-P25 in organic contaminants removal, and shows great potential to replace noble metal as mediator.

The Roles of Nanomaterials in Conventional and Emerging Technologies for Heavy Metal Removal: A State-of-the-Art Review

Heavy metal (HM) pollution in waterways is a serious threat towards global water security, as high dosages of HM poisoning can significantly harm all living organisms. Researchers have developed promising methods to isolate, separate, or reduce these HMs from water bodies to overcome this. This includes techniques, such as adsorption, photocatalysis, and membrane removal. Nanomaterials play an integral role in all of these remediation techniques. Nanomaterials of different shapes have been atomically designed via various synthesis techniques, such as hydrothermal, wet chemical synthesis, and so on to develop unique nanomaterials with exceptional properties, including high surface area and porosity, modified surface charge, increment in active sites, enhanced photocatalytic efficiency, and improved HM removal selectivity. In this work, a comprehensive review on the role that nanomaterials play in removing HM from waterways. The unique characteristics of the nanomaterials, synthesis technique, and removal principles are presented. A detailed visualisation of HM removal performances and the mechanisms behind this improvement is also detailed. Finally, the future directions for the development of nanomaterials are highlighted.