Emission behaviors of nitro- and oxy-polycyclic aromatic hydrocarbons during pyrolytic disposal of electronic wastes

An evaluation of the impact of traffic on the distribution of PAHs and oxygenated PAHs in the soils and moss of the southeast Tibetan Plateau

Contaminants in high-altitude mountains such as the Tibetan Plateau (TP) have attracted extensive attention due to their potential impact on fragile ecosystems. Rapid development of the economy and society has promoted pollution caused by local traffic emissions in the TP. Among the pollutants emitted by traffic, polycyclic aromatic hydrocarbons (PAHs) and oxygenated PAHs (OPAHs) are of particular concern due to their high toxicity. The TP provides an environment to explore the degree and range of contribution for traffic-induced PAHs and OPAHs. In this study, soils and moss were collected at different altitudes and distances from the G318 highway in the southeast TP. The total concentrations of PAHs (∑₁₆PAHs) and OPAHs (∑₆OPAHs) in soils were in the range of 3.29-119 ng/g dry weight (dw) and 0.54-9.65 ng/g dw, respectively. ∑₁₆PAH and ∑₆OPAH concentrations decreased logarithmically with increasing distance from traffic. A significantly positive correlation between ∑₁₆PAHs and altitude was found at sampling points closest to traffic. Dominant PAHs constituents in soil and moss included chrysene (CHR), benzo[g,h,i]perylene (BghiP), and benzo[b]fluoranthene (BbF); prevalent OPAH compounds were 9-fluorenone (9-FO) and 9,10-anthraquinone (ATQ). These compounds were related to characteristics of traffic emissions. The multiple diagnosis ratio and correlation analysis showed that exhaust emissions were the main source of the PAHs and OPAHs in the studied environment. PMF modeling quantification of the relative contribution of traffic emissions to PAHs in roadside soils was 45 % on average. The present study characterized the extent and range of traffic-induced PAH and OPAH emissions, providing valuable information for understanding the environmental behaviors and potential risks of traffic-related contaminants in high-altitude areas.

Effect-directed analysis for revealing aryl hydrocarbon receptor agonists in sediment samples from an electronic waste recycling town in China

Exposure to electronic and electrical waste (e-waste) has been related to a few adverse health effects. In this study, sediment samples from an e-waste recycling town in China were collected, and aryl hydrocarbon receptor (AhR) agonists in the samples were identified using an effect-directed analysis (EDA) strategy. The CBG2.8D cell line reporter gene bioassay was used as a toxicity test, while suspect screening against chemical databases was performed for potential AhR agonist identification where both gas chromatography- and liquid chromatography-high resolution mass spectrometry analyses were run. When the original sample extract showed high AhR-mediated activity, sample fractionation was performed, and fractions exhibiting high bioactivity were chemically analyzed again to reveal the corresponding AhR agonists. In total, 23 AhR agonists were identified, including 14 commonly known ones and 9 new ones. Benzo [k]fluoranthene and 6-nitrochrysene were the dominant AhR agonists, covering 16-71% and 2.7-12%, respectively, of the AhR activation effects measured in the parent extracts. The newly identified AhR-active chemicals combined explained 0.13-0.20% of the parent extracts' effects, with 7,12-dimethylbenz [a]anthracene and 8,9,11-trimethylbenz [a]anthracene being the major contributors. A diagnostic isomer ratio analysis of polycyclic aromatic hydrocarbons suggested that the major source of AhR agonists identified in these e-waste related sediment samples were probably petroleum product combustion and biomass combustion. In the future, for a more comprehensive AhR agonist investigation, in-house chemical synthesis and purification, and, when necessary, a secondary sample fractionation, would be beneficial.

Use of hydrous ABE-glycerin-diesel microemulsions in a nonroad diesel engine - Performance and unignorable emissions

Oversupply, extra energy consumption, and CO₂ emissions from the refinery of biodiesel-derived glycerin (G) led to the consideration of its use as an alternative fuel. In this study, a nonroad diesel engine generator was employed to represent potential emissions under stringent regulated standards. G-diesel has been reported to reduce nitrogen oxides (NOx) and soot levels but increase CO and hydrocarbon emissions. A bio-producible acetone-butanol-ethanol (ABE) solution with multiple polarities was added to stabilize the glycerin and water in diesel examined in this study. A series of ABE-G-diesel blends were prepared to form the thermostable microemulsions. Four blends with small and well-dispersed bubbles were tested in the engine generator. The specific thermal efficiencies of the engine were slightly improved by using ABE-G from regular diesel due to better spray quality, longer ignition delay, and fuel-oxygen content that would enhance combustion. Meanwhile, the PM-NOx-CO emission trade-off in the previous study has been overcome by using ABE-G-diesel since the better fuel atomization and more premixed combustion were approached, as well as the lower and homogeneous in-cylinder temperature caused by water content and micro-explosion. However, the condensable particulate matter and nitro-PAHs were also observed and realized their unignorable contribution, which has not been regulated and even researched for the generators. Fortunately, the new fuels could inhibit both of them to a certain degree. Consequently, this study proposes using recyclable glycerin with a simple pretreatment mixed with ABE and diesel for greener nonroad diesel engine especially those equipped with low-grade aftertreatment.

Occurrence and fate of polycyclic aromatic hydrocarbons from electronic waste dismantling activities: A critical review from environmental pollution to human health

Electronic waste (e-waste) is one of the fastest-growing solid wastes and has become an urgent issue due to the potential adverse consequences of exposure to emitted toxic pollutants, especially for these occupational exposed workers and local residents. In this review, the environmental occurrences, emission characteristics, sources, and possible adverse effects of polycyclic aromatic hydrocarbons (PAHs) emitted from primitive e-waste dismantling activities are summarized. In general, the atmospheric levels of PAHs at typical e-waste sites, e.g., in Guiyu, China, have substantially decreased by more than an order of magnitude compared with levels a decade ago. The PAH concentrations in soil from old e-waste sites in China are also generally lower than those at newly emerged e-waste sites in India, Pakistan and Ghana. However, elevated concentrations of PAHs have been reported in human milk, hair and urine from the populations near these e-waste sites. Source apportionment both from bench-scale studies to field observations has demonstrated that the pyrolysis and combustion processing of electronic circuit board are mainly responsible for the emissions of various PAHs. In addition, some specific PAHs and their derivatives, such as triphenylbenzene, halogenated and oxygenated PAHs, have frequently been identified and could be considered as indicators in routine analysis in addition to the 16 U.S. EPA priority PAHs currently used.

Volatile organic compounds in an e-waste dismantling region: From spatial-seasonal variation to human health impact

The dismantling of electrical and electronic waste (e-waste) can release various Volatile organic compounds (VOCs), impacting the surrounding ambient environment. We investigated the spatio-temporal characteristics and health risks of the ambient VOCs emitted in a typical e-waste dismantling region by conducting multi-site sampling campaigns in four seasons. The pollution of benzene, toluene, ethylbenzene, and xylenes (BTEX) in the e-waste dismantling park has relation to e-waste dismantling by seasonal trend analysis. The highest concentrations of most VOCs occurred in winter and autumn, while the lowest levels were observed in summer and spring. The spatial distribution map revealed the e-waste dismantling park to be a hotspot of BTEX, 1,2-dichloropropane (1,2-DCP), and 1,2-dichloroethane (1,2-DCA), while two major residential areas were also the hotspots of BTEX. The e-waste emission source contributed 20.14% to the total VOCs in the e-waste dismantling park, while it was absent in the major residential and rural areas. The cancer risk assessment showed that six VOCs exceeded 1.0 × 10^-6 in the e-waste dismantling park, while only three or four compounds exceeded this risk in other areas. The noncancer risks of all compounds were below the safety threshold. This study supplements the existing knowledge on VOC pollution from e-waste dismantling and expands the research scope of chemical pollution caused by e-waste.

Field study of PAHs with their derivatives emitted from e-waste dismantling processes and their comprehensive human exposure implications

Extensive electronic waste (e-waste) recycling might be an important emission source of polycyclic aromatic hydrocarbons (PAHs) mixture, which might induce negative effects on the employees. In the present work, atmospheric pollution patterns of PAHs and their derivatives were determined in five different workshops to dismantle waste printed circuit boards (WPCBs) via thermal treatment. The results showed that mass concentrations of PAHs, chlorinated PAHs (ClPAHs), brominated PAHs (BrPAHs), oxy-PAHs (OPAHs) as well as carbazole (CBZ) were ranged from 1.53 × 10⁴-2.02 × 10⁵, 32.3-364, 8.29-1.13 × 10³, 923-1.39 × 10⁴ and 225-1.95 × 10³ pg·m^-3, respectively. Electric heating furnaces (EHF) workshops emitted relatively higher contaminants than other disposal sectors. OPAHs was found to be the most predominant derivatives of PAHs with 9,10-anthraquinone (83.0%) has the absolute superior in EHFTV, while benzo(a)anthracene-7,12-dione (>45.0%) was found to be the highest congener in other workshops, respectively. 9,10-Cl₂Phe exhibited the largest contributions to the ΣClPAHs whereas the composition profiles of BrPAHs varied among five workshops. In addition to direct chlorination of parent PAHs, thermal degradation of halogenated flame retardants incorporated into plastic materials might dominate the generation of Cl/BrPAHs from e-waste dismantling activities. The specific isomeric ratios of BrPAHs (3-BrFlu/1-BrPyr and 1-BrPyr/3-BrFlu) might be used to discriminate other emission sources from pyrolysis of WPCBs. However, their specific application as novel tracers for source identification should be further verified with more studies. The emitted PAHs mixture with their derivatives in all dismantling workshops posed carcinogenic risks to these dismantling workers via inhalation, particularly the workshop using electric heating furnaces to treat router. Nevertheless, new loadings of PAHs derivatives observed from e-waste dismantling activities, as well as their comprehensive health risk assessment provides us with a fresh perspective on the source appointment and potential adverse consequences of PAHs. More attention needs to be paid to the potential carcinogenic risks of exposure to PAHs and their derivatives from e-waste dismantling processes.