Ni-Fe layered double hydroxides catalized ozonation of synthetic wastewater containing Bisphenol A and municipal secondary effluent

A superior catalyst for ozone decomposition: NiFe layered double hydroxide

Ground-level ozone is harmful to human beings and ecosystems, while room-temperature catalytic decomposition is the most effective technology for ozone abatement. However, solving the deactivation of existing metal oxide catalysts was caused by oxygen-containing intermediates is challenging. Here, we successfully prepared a two-dimensional NiFe layered double hydroxide (NiFe-LDH) catalyst via a facile co-precipitation method, which exhibited stable and highly efficient performance of ozone decomposition under harsh operating conditions (high space velocity and humidity). The NiFe-LDH catalyst with Ni/Fe = 3 and crystallization time over 5 hr (named Ni3Fe-5) exhibited the best catalytic performance, which was well beyond that of most existing manganese-based oxide catalysts. Specifically, under relative humidity of 65% and space velocity of 840 L/(g·hr), Ni3Fe-5 showed ozone conversion of 89% and 76% for 40 ppmV of O3 within 6 and 168 hr at room-temperature, respectively. We demonstrated that the layered structure of NiFe-LDH played a decisive role in its outstanding catalytic performance in terms of both activity and water resistance. The LDH catalysts fundamentally avoids the deactivation caused by the occupancy of oxygen vacancies by oxygen-containing species (H2O, O-, and O2-) in manganese-based oxide. This study indicated the promising application potential of LDHs than manganese-based oxide catalysts in removal of gaseous ozone.

Catalytic ozonation of N-methyldiethanolamine over mixed oxides derived from Mg/Fe-LDH

The aim of this study was to evaluate the efficiency of catalytic ozonation to increase the degradation of aqueous N-methyldiethanolamine (MDEA) solutions, using two lamellar double hydroxides, namely Mg_xFe-LDH with x = Mg/Fe = 2, 3, were synthesized by the simple and rapid co-precipitation method. Then, the obtained materials were calcined at 400 °C for 6 h. The calcined products were respectively designated as HTcMg₂Fe and HTcMg₃Fe, and characterized by powder X-ray diffraction (XRD), N₂ physisorption (BET), Fourier transform infrared spectra (FT-IR), and scanning electron microscopy (SEM). The powders produced were used in the ozonation reaction to remove MDEA from aqueous solutions. Experimental results showed that the highest MDEA removal efficiency is in the catalytic ozonation process. Under the optimal conditions for heterogeneous catalytic ozonation of MDEA: initial concentration of 4 Wt% MDEA, 30 °C, catalyst mass of 30 mg/100 ml solution, and contact time of 60 min. The results showed the highest percentage of COD removal, which was up to 80.76% for HTcMg₂Fe higher than that of HTcMg₃Fe 80.36%.

Review of hospital effluents: special emphasis on characterization, impact, and treatment of pollutants and antibiotic resistance

Health care institutions generate large volumes of liquid effluents from specific activities related to healthcare, analysis, and research. Their direct discharge into the environment has various negative effects on aquatic environments and human health, due to their high organic matter charges and the presence of various emerging contaminants such as disinfectants, drugs, bacteria, viruses, and parasites. Moreover, hospital effluents, by carrying antibiotics, contribute to the development of antibiotic-resistant microorganisms in the environment. This resistance has become a global issue that manifests itself variously in different countries, causing the transmission of different infections. In this respect, an effort is provided to protect water resources by current treatment methods that imply physical-chemical processes such as adsorption and advanced oxidation processes, biological processes such as activated sludge and membrane bioreactors and other hybrid techniques. The purpose of this review is to improve the knowledge on the composition and impact of hospital wastewater on man and the environment, highlighting the different treatment techniques appropriate to this type of disposal before discharge into the environment.

FeS combined ozonation to remove p-aminobenzenesulfonamide from water: Density functional theory insights into the mechanism

The applicability and performance of FeS in ozonation process to remove p-aminobenzenesulfonamide (SN) from water was assessed, and the working mechanism of FeS was comprehensively explored by both experimental means and density functional theory (DFT) simulation. FeS combined ozonation achieved 74% of SN removal in 60 min under the optimal condition, which was 37% higher than by ozonation alone, and 12% higher than FeO combined ozonation. Highly active species of •OH, •SO4-, 1O2 and •O2- were detected in the FeS combined ozonation system, the evolution pathway of the involved species was expounded with the aid of DFT calculation. The results revealed that •O2-, H2O2 and SO42- were originally formed via interface reactions on FeS surface, then gradually transformed into •OH, 1O2 and •SO4- through subsequent chain reactions. Moreover, FeS had a lower energy barrier of 0.16 eV than FeO with a value of 0.83 eV for the transformation of ozone to active atomic oxygen. The presented study provided a significant insight into the role of Fe-based materials in ozonation, and was of great importance to guide the route for ozonation process improvement.

Improvement of coal gasification reverse osmosis concentrate treatment by Cu-Co-Mn/AC catalytic ozonation

Approximately 20% of concentrate will be produced from coal gasification wastewater after reverse osmosis treatment. The organic matter contained in the concentrate affects its evaporation crystallisation; therefore, the refractory organics must be removed. In this study, Cu-Co-Mn/AC catalytic ozonation was used to treat reverse osmosis concentrate (ROC). With the addition of the Cu-Co-Mn/AC catalyst, the production of ·OH increased by 82 μmol/L, thereby enhancing the ozonation performance. The pH, ozone dosage, and catalyst dosage all affected the catalytic ozonation performance. By constructing a response surface model, it was found that the catalyst dosage had the most significant effect on the catalytic ozonation performance. The predicted optimal reaction conditions were pH = 9.02, ozone dosage = 1.08 g/L, and catalyst dosage = 1.33 g/L, under which the chemical oxygen demand (COD) removal reached a maximum of 81.49%.

Ni-based catalysts used in heterogeneous catalytic ozonation for organic pollutant degradation: a minireview

Among various advanced oxidation processes for wastewater treatment, heterogeneous catalytic ozonation (HCO) has a growing interest in pollutant degradation, e.g., pesticides, pharmaceuticals, cresols, detergents, polymers, dyes, and others. Direct oxidation with ozone can occur by this route or indirectly, generating reactive oxygen species through the catalytic activation of the ozone molecule. Then, many catalytic materials were evaluated, such as unsupported and supported oxides, activated carbon, nanocarbons, carbon nitride, and mesoporous materials. This review focuses on the properties and performance of Ni-based catalysts (NiO, supported NiO, Ni ferrites, and M-Ni bimetallic), emphasizing the reaction mechanisms and the importance of the reactive oxygen species in removing toxic organic compounds.

Emerging Pollutants in Moroccan Wastewater: Occurrence, Impact, and Removal Technologies

The rapid growth of anthropogenic activities in recent decades has resulted in the appearance of numerous new chemical compounds in the environment, known as “emerging pollutants” (EPs) or “contaminants of emerging concern” (CECs). Although partially or not yet regulated or monitored, there is growing research interest in these EPs among the scientific community because of their bioaccumulation, persistence, and adverse effects. Among these, endocrine disruptors, pesticides, and pharmaceuticals can have harmful impacts on human health and the ecosystem. Conventional wastewater treatment technologies are not effective in removing these contaminants, allowing them to be released into the receiving environment. In order to improve the understanding of emerging pollutants, this review discusses the source, occurrence, and impacts of bisphenol A, atrazine, amoxicillin, and paracetamol as model molecules of emerging environmental pollutants, an issue that remains underrepresented in Morocco. Then, treatment methods for EPs are reviewed, including adsorption, advanced oxidation processes, biodegradation, and hybrid treatment. It is proposed that adsorption and photocatalysis can be used as simple, effective, and environmentally friendly technologies for their removal. Thus, we summarize some of the adsorbent and photocatalyst materials applied in recent work to control these pollutants. Towards the end of this paper, the development of inexpensive and locally available (Morocco) materials to remove these compounds from wastewater is considered.

Adsorption of polycyclic aromatic hydrocarbons over CuZnFeAl–LDH modified by sodium dodecyl sulfate

Polycyclic aromatic hydrocarbons (PAHs) have received extensive attention due to being highly toxic, mutagenic, and carcinogenic organic pollutants. As a result, a series of adsorbents have been designed and developed to solve the problem. In this paper, CuZnFeAl–S has been explored as a highly efficient adsorbent for PAHs. First, CuZnFeAl–LDH was prepared using a coprecipitation method and then calcined at 500 °C to obtain CuZnFeAlO. Finally, CuZnFeAl–S was prepared by modifying CuZnFeAlO with sodium dodecyl sulfate (SDS). The physical and chemical properties of the adsorbents were characterized by XRD, N₂ adsorption–desorption, SEM, ICP, FT-IR, TG-DSC, and IGC; subsequently their adsorption performance was investigated. The results show that the surface properties of CuZnFeAl–S changed from hydrophilic to hydrophobic after SDS modification, which enhanced the adsorption of PAHs obviously. The removal of naphthalene and phenanthrene on CuZnFeAl–S reached 97.3% and 90.3%, respectively. And the adsorption process of naphthalene and phenanthrene conforms to Langmuir adsorption and Freundlich adsorption, respectively. Besides, the adsorption thermodynamics indicate that the adsorption of PAHs was a spontaneous exothermic reaction. The highly efficient PAH adsorption performance of CuZnFeAl–S is the synergistic result of various molecule interactions, such as hydrogen bonding, π–π interactions, and electrostatic attraction.

CuZnFeAl–S improves the adsorption of polycyclic aromatic hydrocarbons, which has a profound impact on environmental treatment.

Graphene-based ZnCr layered double hydroxide nanocomposites as bactericidal agents with high sonophotocatalytic performances for degradation of rifampicin

Herein, ZnCr layered double hydroxide (ZnCr LDH), and its nanocomposites with GO and rGO were synthesized using the co-precipitation method. The samples were characterized using XRD, FT-IR, SEM, TEM, BET, and XPS techniques. The sonophotocatalytic activity of the ZnCr LDH, ZnCr LDH/GO, and ZnCr LDH/rGO was investigated via the degradation of rifampicin (RIF) in the ultrasonic bath under visible light irradiation. The synergy index of more than 1 determined for ZnCr LDH/rGO indicated the positive interaction of sonocatalysis and photocatalysis resulted by hybridizing the LDH nanosheets with rGO. The maximum sonophotocatalytic degradation efficiency of 87.3% was achieved in the presence of ZnCr LDH/rGO nanocomposite with the concentration of 1.5 g L^-1 for degradation of RIF with an initial concentration of 15 mg L^-1 within 60 min sonication under visible light irradiation. The addition of different scavengers indicated that hydroxyl radicals, superoxide anion radicals, and the generated holes played a dominant role in the degradation of the pollutant molecules. A possible degradation mechanism was suggested based on the intermediates. The antibacterial tests confirmed the higher antibacterial activity of ZnCr LDH/GO compared with ZnCr LDH and ZnCr LDH/rGO against Gram-positive Staphylococcus aureus.

Efficient catalytic ozonation of bisphenol A by three-dimensional mesoporous CeOx-loaded SBA-16

Herein, we demonstrated the construction of three-dimensional (3D) cerium oxide (CeO_x)/SBA-16 nanocomposites for efficient removal of bisphenol A (BPA) via a catalytic ozonation, with a high BPA mineralization up to 60.9% in 90 min. On one hand, the CeO_x/SBA-16 mesoporous structured materials presented large surface area and uniform pore distribution, which was conducive to the adsorption of transformation by-products (TBPs) and then, the mass transfer. On the other hand, CeO_x/SBA-16 could enhance the ozone utilization efficiency and meanwhile facilitate the formation of OH, the main reactive oxygen species. Through the exploration of dissoluble organic matters and the identification of the reaction intermediates, two BPA degradation pathways were proposed. This approach reported here will benefit the design and construction of mesoporous structured materials for catalytic elimination of hazards to remediate the environment.

Magnetic cotton textile wastes pyrolyzed by ferric cerium oxide for degradation of p-nitrophenol by catalytic ozonation

In this paper, magnetic cotton textile wastes pyrolyzed by ferric cerium oxide (Fe_xCe_y oxide/PC) were synthesized for degradation of p-nitrophenol by catalytic ozonation, and the optimal Fe-Ce ratio was 10:1. Compared to Fe₁₀Ce₁ oxide, the Fe₁₀Ce₁ oxide/PC not only greatly improved the degradation efficiency of PNP, but also reduced the dosage of catalyst. Through the BET test, the Fe₁₀Ce₁ oxide/PC has a high specific surface area to absorb part of the pollutants. VSM test shows that the material is magnetic and easy to recycle. Response surface methodology (RSM) was applied to optimize the experimental condition, and the optimal removal rate was 90% when the initial pH was 9, the catalyst dosage was 0.4 g/L, and the ozone addition was 1.77 L/min (5.9 mg/L). Finally, the mechanism of PNP degradation was explored utilizing inhibitor and ESR free radical detection. The adsorption capacity of the material and electron-absorbing property of PNP jointly determined the high catalytic efficiency with Fe₁₀Ce₁ oxide/PC in catalytic ozonation.

Ozonation catalysed by ferrosilicon for the degradation of ibuprofen in water

The search for optimal catalysts to improve the working efficiency of ozonation has always been an important issue in the research field of advanced oxidation processes. In this study, a novel catalyst, ferrosilicon, was selected as the catalyst in heterogeneous catalytic ozonation to degrade ibuprofen (IBP) in water and treat real pharmaceutical wastewater. During the procedure, 45^#ferrosilicon exhibited the best catalytic activity. Under the optimized experimental conditions, the IBP removal reached 75%, which was a great improvement compared to the 37% removal by ozone alone. The 45^#-ferrosilicon-catalysed ozonation also achieved 68% TOC removal for real pharmaceutical wastewater, which was 31% higher than that by ozone alone. The degradation pathway of IBP was proposed using GC/MS. The EPR test proved that the main active species in the system were free active radicals •OH, and the measured accumulative •OH amount was 102 μmol. The characterization results show that the nascent metallic oxides, hydroxides, and hydroxyoxides on the ferrosilicon surface facilitated the decomposition of ozone molecules and generation of free active radicals. The removal of target organic contaminants in the water was mainly attributed to the oxidization of these highly active species.

Iron foam combined ozonation for enhanced treatment of pharmaceutical wastewater

In this study, iron foam combined ozonation was employed as an advanced oxidation process to treat the organic contaminants in real pharmaceutical wastewater. It was found that this procedure worked well in a wide range of pH, the existence of iron foam in ozonation system markedly elevated the mineralization level of organic contaminants. Within the reaction time of 120 min, iron foam combined ozonation achieved 53% of DOC removal percentage, which was 21% higher than that of ozone alone. Meanwhile, the biodegradability of the pharmaceutical wastewater was improved, a large part of the organic pollutants containing benzene rings and amino groups were effectively degraded, and a certain amount of phosphate and nitrogen also get removed. In iron foam combined ozonation, zero valent iron played the role as an activator. It was oxidized into iron oxides and oxyhydroxides, the electrons transferring among different valences of iron stimulated the decomposition of ozone and the generation of hydroxyl radicals, which accounted for most of the organic contaminants degradation.