Analytical methodology to screen UV-filters and synthetic musk compounds in market tomatoes

Synthetic musks in the natural environment: Sources, occurrence, concentration, and fate-A review of recent developments (2010-2023)

Synthetic musks (SMs) have served as cost-effective substitutes for natural musk compounds in personal care and daily chemical products for decades. Their widespread use has led to their detection in various environmental matrices, raising concerns about potential risks. Despite numerous studies on SM levels in different natural environments, a systematic review of their contemporary presence is lacking. This review aims to address this gap by summarising recent research developments on SMs in diverse natural environments, including river water, lake water, seawater, estuarine water, groundwater, snow, meltwater, sediments, aquatic suspended matter, soils, sands, outdoor air, and atmospheric particulate matter. Covering the period from 2010 to 2023, the review focuses on four SM categories: nitro, polycyclic, macrocyclic, and alicyclic. It systematically examines their sources, occurrences, concentrations, spatial and temporal variations, and fate. The literature reveals widespread detection of SMs in the natural environment (freshwater and sediments in particular), with polycyclic musks being the most studied group. Both direct (e.g., wastewater discharges) and indirect (e.g., human recreational activities) sources contribute to SM presence. Levels of SMs vary greatly among studies with higher levels observed in certain regions, such as sediments in Southeast Asia. Spatial and temporal variations are also evident. The fate of SMs in the environment depends on their physicochemical properties and environmental processes, including bioaccumulation, biodegradation, photodegradation, adsorption, phase exchange, hydro-dilution effects. Biodegradation and photodegradation can decrease SM levels, but may produce more persistent and eco-toxic products. Modelling approaches have been employed to analyse SM fate, especially for indirect processes like photodegradation or long-distance atmospheric transport. Future studies should further investigate the complex fate if SMs and their environmental influence. This review enhances understanding of SM status in the natural environment and supports efforts to control environmental contamination.

Personal care products in soil-plant and hydroponic systems: Uptake, translocation, and accumulation

Personal care products (PCPs) are organic compounds that are incorporated in several daily life products, such as shampoos, lotions, perfumes, cleaning products, air fresheners, etc. Due to their massive and continuous use and because they are not routinely monitored in the environment, these compounds are considered emerging contaminants. In fact, residues of PCPs are being discharged into the sewage system, reaching wastewater treatment plants (WWTPs), where most of these compounds are not completely degraded, being partially released into the environment via the final effluents and/or accumulating in the sewage sludges. Environmental sustainability is nowadays one of the main pillars of society and the application of circular economy models, promoting the waste valorisation, is increasingly encouraged. Therefore, irrigation with reclaimed wastewater or soil fertilization with sewage sludge/biosolids are interesting solutions. However, these practices raise concerns due to the potential risks associated to the presence of hazardous compounds, including PCPs. When applied to agricultural soils, PCPs present in these matrices can contaminate the soil or be taken up by crops. Crops can therefore become a route of exposure for humans and pose a risk to public health. However, the extent to which PCPs are taken up and bioaccumulated in crops is highly dependent on the physicochemical properties of the compounds, environmental variables, and the plant species. This issue has attracted the attention of scientists in recent years and the number of publications on this topic has rapidly increased, but a systematic review of these studies is lacking. Therefore, the present paper reviews the uptake, accumulation, and translocation of different classes of PCPs (biocides, parabens, synthetic musks, phthalates, UV-filters) following application of sewage sludge or reclaimed water under field and greenhouse conditions, but also in hydroponic systems. The factors influencing the uptake mechanism in plants were also discussed.

UV filters in everyday cosmetic products, a comparative study

Today, UV filters are found as contaminants in a variety of biological fluids and environment, e.g. in vegetable crops and surface water. This is because UV filters are widely used in everyday products. In this context, we focused this study on cosmetic products, in order to assess the importance of this source of contamination. The study of 742 cosmetic products, excluding actual sunscreen products, but including hygiene, personal care and make-up products and perfumes revealed that the most common UV filters present are butyl methoxydibenzoylmethane (90 products or 12.1% of products tested), octyl methoxycinnamate (75 products or 10.1% of products tested), octocrylene (62 products or 8.3% of products tested), octyl salicylate (43 products or 5.8% of products tested) and titanium dioxide (33 products or 4.4% of products tested). Very few UV filters are found in the hygiene products (only in 12 shampoos/conditioners and in 2 shower gels) and deodorants and toothpastes are completely free of them. Conversely, make-up and perfumes are frequently formulated with at least one UV filter. Seventy-five of the two hundred and forty-four (or 30.7%) skincare products studied contained at least one UV filter. 49.1 of the makeup products studied and 74.3% of perfumes contained it.

Concentrations, Profiles, and Health Risks of Organic Ultraviolet Filters in Eight Food Categories Determined through the Sixth Chinese Total Diet Study

Ultraviolet (UV) filters are emerging contaminants that have been found in high concentrations in human tissues. Food intake is generally considered to be the primary route of human exposure to contaminants. In this study, 184 composite food samples, prepared from 4268 individual samples in eight categories collected from 23 Chinese provinces for the sixth Chinese total diet study, were analyzed. The total and median UV filter concentrations in food samples were 1.5-68.3 and 7.9 ng/g wet weight, respectively. The highest median concentrations were found in decreasing order in meat, cereals, and legumes. In total, 15 UV filters were analyzed. 2-Ethylhexyl salicylate, homosalate, and 2-ethylhexyl-4-methoxycinnamate were dominant and made median contributions of 34.1%, 22.6%, and 14.5%, respectively, and 2-(2H-benzotriazol-2-yl)-4,6-di-tert-pentylphenol contributed the median of 0.03%, of the total UV filter concentrations. The estimated total daily UV filter intake in animal-origin foods and total UV filter concentration in human milk from the same province were significantly correlated (r = 0.44, p < 0.05). Predicted absorption, distribution, metabolism, and elimination properties led to 10 UV filters being prioritized as most likely to be retained in human tissues. The prioritization results and toxicity assessments indicated that octocrylene and 2-ethylhexyl-4-methoxycinnamate have stronger effects in vivo and therefore require more attention than others.

Bioremediation of the synthetic musk compounds Galaxolide and Tonalide by white rot fungal strain-assisted phytoremediation in biosolid-amended soil

The study was aimed to conduct the bioremediation of synthetic musks by four species of white rot fungi combined with phytoremediation (Zea mays) in biosolid-amended soils where only Galaxolide (HHCB) and Tonalide (AHTN) were found as other musks were below the detection limit (0.5-2 μg/kg dw). The HHCB and AHTN concentration in natural attenuation treated soil was decreased by not more than 9%. In solely mycoremediation, Pleurotus ostreatus was found to be the most efficient fungal strain, with the higher (P < 0.05) HHCB and AHTN removal (51.3% and 46.4%). Phytoremediation-only of biosolid-amended soil was also able to remove HHCB and AHTN from soil significantly (P < 0.05) in comparison to the control treatment without plants which resulted in the final concentration for both compounds of 56.2 and 15.3 μg/kg dw, respectively. Using white rot fungus-assisted phytoremediation, only P. ostreatus decreased the HHCB content in soil significantly (P < 0.05) by 44.7%, when compared to the initial concentration. While using Phanerochaete chrysosporium, the AHTN concentration was decreased by 34.5%, which was a significantly lower concentration at the end of experiment compared to the initial value. Via fungus-assisted phytoremediation, the enzymatic activity and fungal biomass were increased, probably due to the presence of roots in association with the soil microbiome, in the process increasing the degradation of fragrances accordingly. This could lead to a higher (P < 0.05) AHTN removal in P. chrysosporium assisted phytoremediation. Estimated HHCB and AHTN bioaccumulation factors in maize were lower than 1, therefore no environmental risk would be posed.

Residual analysis of QoI fungicides in multiple (six) types of aquatic organisms by UPLC-MS/MS under acutely toxic conditions

In view of the significance of food safety and the possible relationship between residual enrichment and acute toxicity for pesticides in different aquatic organisms, it is essential to establish a sensitive and reliable determination method for pesticides in different aquatic organisms to analyze the enrichment levels. Quinone outside inhibitor fungicides (QoIs) are lipophilic fungicides that pose environmental threats to aquatic organisms. Previous research has mainly focused on QoI residues in aquatic organisms under chronic toxicity, whereas less is known about how pesticide residues differ among aquatic organism under acutely toxic conditions. In the present study, the residues of QoIs in aquatic organisms (Danio rerio, Rana pipiens, Cherax quadricarinatus, Misgurnus anguillicaudatus, Corbicula fluminea, and Ampullaria gigas) were analyzed by ultrahigh-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) coupled with a proposed QuEChERS method. The proposed method was validated in terms of linearity (coefficients of determination of 0.9980-0.9999), the limits of quantification (0.01 μg·kg^-1), the relative standard deviation (0.6-4.4%), and recovery (70.12-118.15%). The results demonstrated that the proposed method fulfilled the requirements for pesticide analysis in all tested aquatic organisms. The residues of QoIs in the same aquatic organism exposed to QoI concentrations of 5 and 500 μg L^-1 decreased in the order pyraoxystrobin > pyraclostrobin > triclopyricarb > picoxystrobin > azoxystrobin > fluoxastrobin. Furthermore, the acute toxicity was strongly correlated with the enrichment level of the QoIs in aquatic organisms. This study provides the first documentation of a correlation between the enrichment level of QoIs and acute toxicity in aquatic organisms, which provides a basis for the management of agrochemicals considering aquatic ecological risks.

Occurrence and environmental hazard of organic UV filters in seawater and wastewater from Gran Canaria Island (Canary Islands, Spain)

Organic ultraviolet (UV) filters are used in personal care products, but they are also added to industrial products and are constantly released to the environment. This study analyses the occurrence of 8 widely used organic UV filters in seawater from three beaches on the Gran Canaria Island (Spain) and in three wastewater treatment plants (WWTPs) by taking samples from influents and effluents. It also discusses the target compounds' post-treatment removal efficiencies. Sampling was carried out for 6 months and analytes were extracted by solid phase extraction with Sep-pak C18 cartridges. They were determined by ultra-high performance liquid chromatography coupled to mass spectrometry in tandem. The potential environmental hazard associated with the found concentrations was also assessed for marine organisms. Different target compounds were detected on the analysed beaches and in the wastewater. Benzophenone-3 (BP3) was the most recurrent compound in the seawater samples (frequency detection of 83%) and also in wastewater influents and effluents (measured in all the samples). However, the highest concentrations for seawater (172 μg L^-1) and influent wastewater (208 μg L^-1) corresponded to octocrylene, while methylene bis-benzotriazolyltetramethylbutylphenol was the compound most concentrated in secondary treatment effluent (34.0 μg L^-1) and BP3 in tertiary treatment effluent (8.07 μg L^-1). All the analysed samples showed that at least one target UV filter was present. Regarding the removal efficiencies of these compounds in the studied WWTPs, consistent differences between the target compounds were observed in influent concentration terms, where the average removal rates were higher than 50% for most of the compounds. Conventional treatment is unable to completely remove many studied compounds, while tertiary treatment acts as an additional elimination for some of them. An environmental hazard quotient above 1 was found for octocrylene, benzophenone-3 and 4-methylbenzylidene camphor, which indicates a potential high hazard for living species if these compounds are present.

Determination of Market, Field Samples, and Dietary Risk Assessment of Chlorfenapyr and Tralopyril in 16 Crops

The frequent and massive use of chlorfenapyr has led to pesticide residues in crops, threatening food safety and human health. However, there is limited research on the detection of tralopyril, which is the major metabolite of chlorfenapyr with high toxicity. This study aimed to develop a novel, sensitive, and highly efficient method for the determination of chlorfenapyr and tralopyril residues in 16 crops. The optimized purification procedure provided satisfactory recovery of 76.6-110%, with relative standard deviations of 1.3-11.1%. The quantification values of pesticides in crop matrixes were all 0.01 μg kg^-1. The optimal method was adopted to determine the chlorfenapyr and tralopyril residues in field trials in 12 regions in China and monitor their residues in 16 agricultural products. The results of the dissipation and terminal residue experiments show that the final residue of chlorfenapyr was less than MRL (maximum residue limit) and no tralopyril was detected in the field samples. Moreover, the qualification proportion of these residues in market samples were up to 99.5%. The RQ (risk quotient) values of chlorfenapyr and chlorfenapyr with consideration of tralopyril were both apparently lower than an RQ of 100%, indicating an acceptable level. This research provides a thorough long-term dietary risk evaluation on chlorfenapyr and tralopyril and would provide reference for their scientific and safe utilization.

Uptake and translocation of UV-filters and synthetic musk compounds into edible parts of tomato grown in amended soils

In the last years, the number of wastewater treatment plants (WWTPs) has increased and consequently, sewage sludge production. This residue is very rich in crop nutrients, which makes it prone to be used as organic fertilizer or soil conditioner for agriculture. However, the presence of emerging pollutants in these fertilizers has raised concern, namely their potential accumulation in soil and, eventually their uptake by crops. Therefore, the main goal of this work was to study the potential plant uptake and translocation of ultraviolet-filters (UVFs) and synthetic musk compounds (SMCs). A total of 6 UVFs and 11 SMCs were analysed in Micro-Tom tomatoes grown in soil amended with a commercial sewage sludge-based organic fertilizer. Most of the studied compounds were detected in the tomato fruit, in concentrations ranging from 5 to 147 ng g^-1 dw for UVFs and from 1.3 to 68 ng g^-1 dw for SMCs. This indicates a potential uptake of these emerging pollutants and a subsequent translocation to the fruits. Besides that, UVFs show bioconcentration factors (BCFs) from 3 (DTS) to 33 (BZ) and SMCs from 0.2 (AHTN) to 23 (HHCB). Nevertheless, no risk by ingestion was observed based on estimation of the weekly exposure dose through hazard quotients (HQ < 0.02). SMCs galaxolide and tonalide seem to pose risk to the amended soils.

Direct and indirect monomer elution from an RBC product family

OBJECTIVE

To develop a model for quantitative comparison of elutable substances by direct elution from resin-bonded composite (RBC) test specimens versus indirect elutability of substances from RBC-restored teeth. Furthermore, it was to be investigated whether the different composites of the Tetric® RBC product family release different types and amounts of substances.

METHODS

Four different composite materials from the Tetric® product family were studied. For each material subgroup ten human third molar teeth were prepared with standard Class-I occlusal cavities. These 'tooth group' specimens were provided with a three-step adhesive system (incorporating TEGDMA) and the respective composite restoration. Same sized control specimens, of each RBC restorative material, were prepared ('direct RBC' groups). All specimens were placed in individual elution chambers such that the elution media (ethanol/water, 3:1) only came into contact with either the tooth root or ¾ height of the 'direct RBC' materials. They were incubated at 37 °C for up to 7 d. Samples of the eluant were taken after 1, 2, 4 and 7 d and were analysed by high-temperature gas chromatography/mass spectrometry.

RESULTS

Bisphenol A ethoxylate dimethacrylate (bisEMA), bisphenol A glycidyldimethacrylate (bisGMA), tetraethylene glycol dimethacrylate (TEEGDMA), decan-1,10-diol dimethacrylate (DDDMA) were mostly found in the eluates of the 'direct RBC' groups in statistically significantly greater amounts than in the eluates of the 'tooth groups'. Such quantitative differences were also the case with eluates containing bisphenol A (BPA), dicyclohexyl phthalate (DCHP) and drometrizole, which are common in the environment. In contrast to the behavior found with all the other monomers, up to 3 orders of magnitude more triethylene glycol dimethacrylate (TEGDMA) was found in the 'tooth groups' compared to the 'direct RBC' groups, evidently released by the adhesive system.

SIGNIFICANCE

The release of most of the substances was clearly delayed in the 'tooth groups' indicative of their chronic, rather than acute, elution to the oral environment. A barrier function of the residual dentin layer and the adhesion layer can be inferred. The different release patterns of substances from the various composites of the RBC product family is a manifestation of their different and indication-specific compositions. Consideration of an overall restorative care (RBC plus adhesive) system, when assessing the total amount of released substances, is emphasized.

Optimization method for quantification of sunscreen organic ultraviolet filters in coastal sands

Most organic ultraviolet filters are very lipophilic and some of them are difficult to quantify in the environment. This article describes an optimization method for the quantification of these compounds in sand samples with diverse compositions. The standard additions method was used. The search for a unique high-performance liquid chromatography method to analyze all these filters along with the search for optimal detection conditions are presented in detail. The best extraction solvent was methanol, and the best conditions for analysis and detection involved the use of a high-performance liquid chromatography system equipped with a biphenyl column (2.6 μm, 150 × 4.6 mm), and an Orbitrap MS detector. We also demonstrated that sample freeze-drying can induce significant loss of some of the ultraviolet filters.