Simultaneous oxidation and removal of Sb(III) from water by using synthesized CTAB/MnFe2O4/MnO2 composite

Facile synthesis of δ-MnO2 biotemplated by waste tobacco stem-silks for enhanced removal of Sb(III)

The elimination of antimony pollution has attracted increasing concerns because of its high toxicity to human health and the natural environment. In this work, biomimetic δ-MnO2 was synthesized by using waste tobacco stem-silks as biotemplate (Bio-δ-MnO2) and used in the capture of Sb(III)from aqueous solution. The tobacco stem-silks not only provided unique wrinkled morphologies but also contained carbon element self-doped into the resulting samples. The maximum Sb(III) adsorption capacity reached 763.4 mg∙g -1, which is 2.06 times higher than δ-MnO2 without template (370.0 mg∙g -1), 4.53 times than tobacco stem-silks carbon (168.5 mg∙g -1), and 10.39 times than commercial MnO2 (73.5 mg∙g -1), respectively. The isotherm and kinetic studies indicated that the adsorption behavior was consistent with the Langmuir isotherm model and the pseudo-second-order kinetic equation. As far as we are aware, the adsorption capacity of Bio-δ-MnO2 is much higher than that of most Sb(III) adsorbents. FT-IR, XPS, SEM, XRD, and Zeta potential analyses showed that the main mechanism for the adsorption of Sb(III) by Bio-δ-MnO2 includes electrostatic attraction, surface complexation, and redox. Overall, this study provides a new sustainable way to convert agricultural wastes to more valuable products such as biomimetic adsorbent for Sb(III) removal in addition to conventional activated carbon and biochar.

Separable alginate gel spheres encapsulated with La-Fe modified biochar for efficient adsorption of Sb(III) with high capacity

Sb and its compounds have been widely used in various industrial applications. Therefore, the preparation of Sb adsorbents with easy recovery and excellent adsorption levels is an urgent problem that must be resolved. By calcining and treating La/Fe metal-organic frameworks (MOF) biochar as a precursor, a loaded La-Fe-modified water hyacinth biochar was synthesised and used as a filler to synthesise iron alginate composite gel spheres, MBC/algFe. Through a series of static adsorption experiments, the effects of different filler addition ratios, solution pH, reaction time, coexisting ions, and other factors on the adsorption of Sb(III) were investigated. According to the Langmuir model, the maximum adsorption capacity of MBC/algFe at 25 ℃ was 277.8 mg·g-1. The adsorption mechanism mainly involved hydrogen bonding and metal-organic complexation interactions.

A critical review on adsorptive removal of antimony from waters: Adsorbent species, interface behavior and interaction mechanism

Antimony (Sb) has raised widespread concern because of its negative effects on ecology and human health. The extensive use of antimony-containing products and corresponding Sb mining activities have discharged considerable amounts of anthropogenic Sb into the environment, especially the water environment. Adsorption has been employed as the most effective strategy for Sb sequestration from water; thus, a comprehensive understanding of the adsorption performance, behavior and mechanisms of adsorbents benefits to develop the optimal adsorbent to remove Sb and even drive its practical application. This review presents a holistic analysis of adsorbent species with the ability to remove Sb from water, with a special emphasis on the Sb adsorption behavior of various adsorption materials and their Sb-adsorbent interaction mechanisms. Herein, we summarize research results based on the characteristic properties and Sb affinities of reported adsorbents. Various interactions, including electrostatic interactions, ion exchange, complexation and redox reactions, are fully reviewed. Relevant environmental factors and adsorption models are also discussed to clarify the relevant adsorption processes. Overall, iron-based adsorbents and corresponding composite adsorbents show relatively excellent Sb adsorption performance and have received widespread attention. Sb removal mainly depends on chemical properties of the adsorbent and Sb itself, and complexation is the main driving force for Sb removal, assisted by electrostatic attraction. The future directions of Sb removal by adsorption focus on the shortcomings of current adsorbents; more attention should be given to the practicability of adsorbents and their disposal after use. This review contributes to the development of effective adsorbents for removing Sb and provides an understanding of Sb interfacial processes during Sb transport and the fate of Sb in the water environment.

Insight into the removal of vanadium ions from model and real wastewaters using surface grafted zirconia-based adsorbents: Batch experiments, equilibrium and mechanism study

This study concerns the fabrication of CTAB- and N,N-dimethyltetradecylamine-grafted zirconia and evaluation of their ability to adsorb vanadium ions. The effectiveness of ZrO₂ functionalization and the different nature of the modifiers used were confirmed by differences in the porosity (ZrO₂: S_BET = 347 m²/g; ZrO₂-CTAB: S_BET = 375 m²/g, ZrO₂-NH⁺: S_BET = 155 m²/g), types of functional groups, and isoelectric points (the ZrO₂ and CTAB-modified samples have IEPs = 3.8 and 3.9, ZrO₂-NH⁺ has IEP = 7.1) of the prepared adsorbents. The designed materials were tested in batch adsorption experiments involving the removal of vanadium ions from model wastewaters at various process parameters, among which pH proved to be the most important. Based on equilibrium and kinetic evaluations, it was proved that the sorption of V(V) ions followed pseudo-second-order and intraparticle diffusion models, and the data were better fitted to the Langmuir model, suggesting the following order of the sorbents in terms of favorability for V(V) ion adsorption: ZrO₂-NH⁺ > ZrO₂ > ZrO₂-CTAB. The estimated maximum monolayer capacity of ZrO₂-NH⁺ for V(V) (87.72 mg/g) was the highest among the tested materials. Additionally, it was confirmed that adsorption of V(V) ions onto synthesized materials is a heterogeneous, exothermic, and spontaneous reaction, as evidenced by the calculated values of thermodynamic parameters. The key goals included the transfer of experimental findings obtained using model solutions to the adsorption of V(V) ions from solutions arising from the leaching process of spent catalysts. The highest adsorption efficiencies of 70.8% and 47.5% were recorded for the ZrO₂-NH⁺ material in acidic solution; this may be related to the protonization of -NH⁺ groups, which favors the sorption of V(V) ions. Based on desorption tests as well as the results of infrared and X-ray photoelectron spectroscopy, irrespective of the process conditions, the physical nature of the adsorbent/adsorbate interaction was confirmed.

Antimony redox processes in the environment: A critical review of associated oxidants and reductants

The environmental behavior of antimony (Sb) has recently received greater attention due to the increasing global use of Sb in a range of industrial applications. Although present at trace levels in most natural systems, elevated Sb concentrations in aquatic and terrestrial environments may result from anthropogenic activities. The mobility and toxicity of Sb largely depend on its speciation, which is dependent to a large extent on its oxidation state. To a certain extent, our understanding of the environmental behavior of Sb has been informed by studies of the environmental behavior of arsenic (As), as Sb and As have somewhat similar chemical properties. However, recently it has become evident that the speciation of Sb and As, especially in the context of redox reactions, may be fundamentally different. Therefore, it is crucial to study the biogeochemical processes impacting Sb redox transformations to understand the behavior of Sb in natural and engineered environments. Currently, there is a growing body of literature involving the speciation, mobility, toxicity, and remediation of Sb, and several reviews on these general topics are available; however, a comprehensive review focused on Sb environmental redox chemistry is lacking. This paper provides a review of research conducted within the past two decades examining the redox chemistry of Sb in aquatic and terrestrial environments and identifies knowledge gaps that need to be addressed to develop a better understanding of Sb biogeochemistry for improved management of Sb in natural and engineered systems.

Recent advances in application of iron-manganese oxide nanomaterials for removal of heavy metals in the aquatic environment

Heavy metal pollution has a serious negative impact on the ecological environment and human health due to its toxicity, persistence, and non-biodegradable properties. Among the technologies applied in heavy metals removal, adsorption has been widely used as the most promising method because of its simple operation, high removal efficiency, strong applicability, and low cost. Iron-manganese oxide nanomaterials, as an effective absorbent, have attracted wide attention due to their simple preparation, wide material sources, and lower ecological impact. So far, no quantitative investigation has been conducted on the preparation and application of iron-manganese oxide nanomaterials in heavy metals removal. This review discussed the preparation methods and characteristics of iron‑manganese oxide nanomaterials over the past decade and provided some basic information for the improvement of preparation methods. The physicochemical properties of iron‑manganese oxide nanomaterials and environmental conditions are regarded as important factors that affect the removal efficiency of heavy metals. In addition, the removal mechanisms of heavy metals in aqueous solution with iron‑manganese oxide nanomaterials were mainly included redox, complex precipitation, electrostatic attraction, and ion exchange. The reusability and practicability in actual wastewater treatment of 3nganese oxide nanomaterials were further discussed. Several key problems still need to be solved in the existing progress, such as improving the ability and stability of the iron‑manganese oxide nanomaterials to remove heavy metals from actual wastewater. In conclusion, this review provides a future direction for the application of iron‑manganese oxide nanomaterials for heavy metals removal and even in the large-scale treatment of actual wastewater.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Removal of Sb(V) from wastewater via siliceous ferrihydrite: Interactions among ferrihydrite, coprecipitated Si, and adsorbed Sb(V)

Although ferrihydrite (Fh) exhibits good Sb(V) adsorption behavior, the instability of its amorphous structure limits its engineering applications. In this study, siliceous ferrihydrite (SiFh) was prepared via coprecipitation to resolve these limitations. X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and SiFh aging tests revealed that the growth of Fh particles covered with Fe-O-Si links was inhibited while maintaining their amorphous structure. Meanwhile, the XRD patterns indicated that SiFh maintained excellent stability after five adsorption-desorption cycles. During the aging process, the added Si decreased the electrostatic interaction between SiFh and Sb(V), which weakened the affinity between Sb(V) and Fh; however, most of the Sb(V) still entered the Fe lattice after seven days of aging, which was favorable for Sb(V) recovery during reutilization. Furthermore, Sb(V) adsorbed from the simulated textile wastewater onto SiFh had the highest adsorption energy (E_ads), which meant its unstable inner-sphere complexation on the surface of SiFh. Meanwhile, the presence of SO₄^2-, NO₃^-, Ca²⁺, and Mg²⁺ contributed to Sb(V) outer-sphere adsorption. Both of these factors were conducive to Sb(V) desorption. Hence, SiFh is a promising adsorbent owing to its facile preparation process, stability, and optimal regeneration properties.

A biochar supported magnetic metal organic framework for the removal of trivalent antimony

Metal organic framework (MOF) nanoparticles are recognized for their effective removal of metal ions from aqueous systems. However, the application of nanoparticles in a powder form as synthesized is not practical and recovery is not easy. We prepared a recyclable magnetic MOF nanoparticle phase and used a widely available waste biomass to generate biochar to support magnetic nanoparticles applied in the treatment of aqueous antimony pollution. A mushroom waste biochar was used to support a magnetic UIO-66-2COOH (denoted as BSMU). Adsorption of trivalent antimony (Sb (III)) onto the BSMU was evaluated. The results showed that optimum conditions for preparation of the BSMU were the mass ratio of MMOF to biochar 4:1, the temperature 70 °C, the time 4 h, and the initiator 4 mM. Under such conditions, sorption capacity reached 56.49 mg/g for treatment of Sb (III) solution at 100 mg/L and pH 9.1. Alkaline conditions (such as pH 9.1) are more favorable for adsorption than acidic conditions, and coexisting ions including NO₃^-, Cl^-, SO₄^2-, and PO₄^3- had no significant negative effect in adsorption, and with the use of low dose, higher adsorption density achieved. The adsorption followed a pseudo second order kinetics model and Freundlich isotherm model. It resulted in a higher enthalpy changes (ΔH^θ) and activation energy (E_a) of 97.56 and 8.772 kJ/mol, respectively, and enhanced the rate pf random contact between antimony and the BSMU, as indicated by a higher entropy change (ΔS^θ) up to 360 J/mol·K. As a result, it readily absorbs antimony. These adsorption properties identified in this study would provide a valuable insights into the application of nanoparticles loaded biochar from abundant biomass in environmental remediation.

Insights into adsorptive removal of antimony contaminants: Functional materials, evaluation and prospective

The application of antimony containing compounds in the industry has generated considerable antimony contaminants, which requires to develop methods that are as efficient as possible to remove antimony from water in the view of human health. The adsorption is among the most high-efficiency and reliable purification methods for hazardous materials due to the simple operation, convenient recycling and low cost. Herein, this review systematically summarizes the functional materials that are used to adsorb antimony from water, including metal (oxides) based materials, carbon-based materials, MOFs and molecular sieves, layered double hydroxides, natural materials, and organic-inorganic hybrids. The iron-based adsorbents stand out among these adsorbents because of their excellent performance. Moreover, the interaction between antimony and different functional materials is discussed in detail, while the inner-sphere complexation, hydrogen bond as well as ligand exchange are the main impetus during antimony adsorption. In addition, the desorption methods in adsorbents recycling are also comprehensively summarized. Furthermore, we propose an adsorption capacity balanced evaluation function (ABEF) based on the reported results to evaluate the performance of the antimony adsorption materials for both Sb(III) and Sb(V), as antimony usually has two valence forms of Sb(III) and Sb(V) in wastewater. Another original insight in this review is that we put forward a potential application prospect for the antimony-containing waste adsorbents. The feasible future development includes the utilization of the recycled antimony-containing waste adsorbents in catalysis and energy storage, and this will provide a green and sustainable pathway for both antimony removal and resourization.

A Critical Review of Resistance and Oxidation Mechanisms of Sb-Oxidizing Bacteria for the Bioremediation of Sb(III) Pollution

Antimony (Sb) is a priority pollutant in many countries and regions due to its chronic toxicity and potential carcinogenicity. Elevated concentrations of Sb in the environmental originating from mining and other anthropogenic sources are of particular global concern, so the prevention and control of the source of pollution and environment remediation are urgent. It is widely accepted that indigenous microbes play an important role in Sb speciation, mobility, bioavailability, and fate in the natural environment. Especially, antimony-oxidizing bacteria can promote the release of antimony from ore deposits to the wider environment. However, it can also oxidize the more toxic antimonite [Sb(III)] to the less-toxic antimonate [Sb(V)], which is considered as a potentially environmentally friendly and efficient remediation technology for Sb pollution. Therefore, understanding its biological oxidation mechanism has great practical significance to protect environment and human health. This paper reviews studies of the isolation, identification, diversity, Sb(III) resistance mechanisms, Sb(III) oxidation characteristics and mechanism and potential application of Sb-oxidizing bacteria. The aim is to provide a theoretical basis and reference for the diversity and metabolic mechanism of Sb-oxidizing bacteria, the prevention and control of Sb pollution sources, and the application of environment treatment for Sb pollution.

Highly efficient removal of Sb(V) from water by franklinite-containing nano-FeZn composites

The existence of toxic and carcinogenic pentavalent antimony in water is a great safety problem. In order to remove antimony(V) from water, the purpose of this study was to prepare a novel graphene nano iron zinc (rGO/NZV-FeZn) photocatalyst via hydrothermal method followed by ultrasonication. Herein, weakly magnetic nano-Fe–Zn materials (NZV-FeZn, GAC^SP/NZV-FeZn, and rGO/NZV-FeZn) capable of rapid and efficient Sb(V) adsorption from water were prepared and characterised. In particular, rGO/NZV-FeZn was shown to comprise franklinite, Fe⁰, and graphite. Adsorption data were fitted by a quasi-second-order kinetic equation and Langmuir model, revealing that among these materials, NZV-FeZn exhibited the best Sb removal performance (543.9 mg_Sb g_NZV-FeZn⁻¹, R² = 0.951). In a practical decontamination test, Sb removal efficiency of 99.38% was obtained for a reaction column filled with 3.5 g of rGO/NZV-FeZn. Column regenerability was tested at an initial concentration of 0.8111 mg_Sb L⁻¹, and the treated water obtained after five consecutive runs complied with the GB5749-2006 requirement for Sb. rGO/NZV-FeZn was suggested to remove Sb(V) through adsorption-photocatalytic reduction and flocculation sedimentation mechanisms and, in view of its high cost performance, stability, and upscalable synthesis, was concluded to hold great promise for source water and wastewater treatment.

Surfactant-assisted adsorption of uranyl ions in aqueous solution on TiO2/polythiophene nanocomposite

In this work, hexadecyltrimethylammonium-bromide (HTAB)-modified polythiophene (PTh)/TiO₂ nanocomposite (HTAB/PTh/TiO₂) was applied to remove uranyl ions (UO₂²⁺). FT-IR, XRD, ζ potential, TGA, SEM, and XPS were utilized to obtain the chemical and physical properties of HTAB/PTh/TiO₂. The effects of HTAB content, preparation temperature, and adsorption conditions on UO₂²⁺ removal were investigated comprehensively. And the UO₂²⁺ adsorption process on HTAB/PTh/TiO₂ was fitted to the Sips model with a saturated adsorption capacity of 234.74 mg/g, which was 6 times over TiO₂. The results suggested that the surfactant of HTAB can significantly improve the adsorption ability of TiO₂ for UO₂²⁺ ions. This work provides a strategy of surfactant modification for enhancing the separation and recovery ability of adsorbent toward UO₂²⁺ in the radioactive wastewater.

Simultaneous decontamination of arsenite and antimonite using an electrochemical CNT filter functionalized with nanoscale goethite

The co-presence of arsenic (As) and antimony (Sb) in water bodies has been commonly reported. The toxicity of As and Sb varies with different speciation. Herein, we designed a dual-functional electrochemical filter toward "one-step" detoxification and sequestration of highly toxic As(III) and Sb(III). The key to this technology is a functional anodic filter consists of nanoscale goethite and carbon nanotubes (CNT). Results showed that 97.9% As(III) and 91.9% Sb(III) transformation and 86.4% As_total and 70.1% Sb_total removal efficiency can be obtained over 2 h continuous filtration under optimized conditions. The As_total removal kinetics and efficiency enhanced with flow rate and applied voltage (e.g., the As_total removal efficiency increased from 62.9% at 0 V to 86.4% at 2.5 V). This enhancement in kinetics and efficiency can be explained by the synergistic effects of the flow-through design, plentiful exposed sorption sites, electrochemical reactivity, and nanoscale goethite. Moreover, the proposed technology works effectively across a wide pH range. Only negligible inhibition was observed in the presence of nitrate, chloride, and carbonate. Exhausted hybrid filters can be effectively regenerated by using chemical wash with NaOH solution. This study not only revealed the different adsorption behaviors of As(III) and Sb(III) on the hybrid filters, but also provided new insights into rational design of continuous-flow filters toward simultaneous decontamination of As(III) and Sb(III).

Mechanism analysis of MnFe2O4/FeSX for removal of Cr(VI) from aqueous phase

By using Na₂S as a sulfur source, sulfur-doped MnFe₂O₄ was prepared using one-step solvent thermal method and utilized to remove hexavalent chromium. The materials were characterized through scanning electron microscopy, transmission electron microscopy, high-resolution TEM, X-ray diffraction, Fourier-transform infrared spectroscopy, Brunauer-Emmett-Teller method, zeta potential test, vibrating sample magnetometry, and X-ray photoelectron spectroscopy. When the pH was 3, the adsorption capacity of MnFe₂O₄/FeS_X-0.5 to Cr(VI) was 43.36 mg/g, which was roughly five times that of MnFe₂O₄ (8.90 mg/g). MnFe₂O₄/FeS_X-0.5 and MnFe₂O₄ fitted the Freundlich and pseudo-second-order kinetic models well. The electrochemical test analysis results showed that MnFe₂O₄/FeS_X had a faster MnFe₂O₄ electron transfer rate and higher electron transfer capacity than MnFe₂O₄, and thus promoted the reduction of Cr(VI) to Cr(III). This finding could be attributed to the lower electronegativity of the sulfur element than the oxygen element. In addition, the formation of additional FeS_X through sulfur doping improved the Cr(VI) removal ability of the prepared materials. The XPS and desorption results showed that more than 80% of the adsorbed Cr(VI) were reduced to Cr(III), which indicated that reduction was an important mechanism for Cr(VI) removal. This study verified that sulfur-doped manganese ferrite can be utilized in the high-efficiency removal of Cr(VI).

MnO2 -Based Materials for Environmental Applications

Manganese dioxide (MnO₂ ) is a promising photo-thermo-electric-responsive semiconductor material for environmental applications, owing to its various favorable properties. However, the unsatisfactory environmental purification efficiency of this material has limited its further applications. Fortunately, in the last few years, significant efforts have been undertaken for improving the environmental purification efficiency of this material and understanding its underlying mechanism. Here, the aim is to summarize the recent experimental and computational research progress in the modification of MnO₂ single species by morphology control, structure construction, facet engineering, and element doping. Moreover, the design and fabrication of MnO₂ -based composites via the construction of homojunctions and MnO₂ /semiconductor/conductor binary/ternary heterojunctions is discussed. Their applications in environmental purification systems, either as an adsorbent material for removing heavy metals, dyes, and microwave (MW) pollution, or as a thermal catalyst, photocatalyst, and electrocatalyst for the degradation of pollutants (water and gas, organic and inorganic) are also highlighted. Finally, the research gaps are summarized and a perspective on the challenges and the direction of future research in nanostructured MnO₂ -based materials in the field of environmental applications is presented. Therefore, basic guidance for rational design and fabrication of high-efficiency MnO₂ -based materials for comprehensive environmental applications is provided.