A novel strategy for accelerating the recovery of a Fe(II)-inhibited anammox reactor by intermittent addition of betaine: Performance, kinetics and statistical analysis

Recovery strategies and mechanisms of anammox reaction following inhibition by environmental factors: A review

Anaerobic ammonium oxidation (anammox) is a promising biological method for treating nitrogen-rich, low-carbon wastewater. However, the application of anammox technology in actual engineering is easily limited by environmental factors. Considerable progress has been investigated in recent years in anammox restoration strategies, significantly addressing the challenge of poor reaction performance following inhibition. This review systematically outlines the strategies employed to recover anammox performance following inhibition by conventional environmental factors and emerging pollutants. Additionally, comprehensive summaries of strategies aimed at promoting anammox activity and enhancing nitrogen removal performance provide valuable insights into the current research landscape in this field. The review contributes to a comprehensive understanding of restoration strategies of anammox-based technologies.

Rapid anaerobic culture and reaction kinetic study of anammox bacteria on microfluidic chip

Anammox bacteria are being increasingly investigated as part of an emerging nitrogen removal technology. However, due to the difficulty in culturing, current understanding of their behavior is limited. In this study, anaerobic microfluidic chips were used to study anammox bacteria, showing great advantages over reactors. On-chip fluorescence in situ hybridization (FISH) showed the relative abundance of free form anammox bacteria increased by 56.1 % after one week's culture, an increase that is three times higher than that of bioreactor (17.1 %). For granular form cultures, the nitrogen removal load reached 2.34 ∼ 2.51 kg-N/(m3·d), which was also substantially higher than the bioreactor (∼1.22 kg-N/(m3·d)). Furthermore, studying the kinetics of nitrite inhibition of granular sludge with different particle sizes (100-900 μm) showed that the maximum ammonia load and the nitrite semi-saturation coefficient noticeably decreased for smaller particle sizes. These results illustrate the usefulness of the microfluidic method for in-depth understanding anammox process and its implementation.

Roles of red mud-based biochar carriers in the recovery of anammox activity: characteristics and mechanisms

Anaerobic ammonium oxidation (anammox) sludge is easily deactivated in the process of treating ammonia-laden wastewater. To investigate an effective recovery method, red mud-based biochar carriers (RMBC) were prepared and added to a deactivated anammox reactor; the operation of this reactor had been interrupted for 6 months with starvation and low temperature. The deactivated sludge with added RMBC was recovered rapidly after 31 days, with the specific anammox activity rapidly increasing to 0.84 g N/(g VSS∙day), and the recovery efficiency of nitrogen removal rate increased by four times compared to the unadded control. The granulation degree and extracellular polymeric substances secretion of the anammox sludge with the added RMBC were significantly higher than that of the control group. In addition, a large number of spherical anammox bacteria were observed moored at the porous channels of RMBC, and the copy numbers of functional genes of anammox bacteria were approximately twice that of the control group. Hence, RMBC is a potential sludge activator, and it can provide a "house" to protect anammox bacteria, enhance the metabolic activity and the agglomerative growth of anammox bacteria, and synergistically achieve rapid recovery of deactivated anammox sludge.

Long-term effect of light rare earth element neodymium on Anammox process

During the mining of rare earth minerals, the application of neodymium-containing manures, and the treatment of spent neodymium iron boron magnet, the generation of ammonia wastewater containing neodymium is increasing. Thus, the effects of neodymium (Nd(III)) on anaerobic ammonium oxidation (Anammox) were investigated from the aspects of performance, kinetics, statistics, microbial community and sludge morphology, and the recovery strategy of EDTA-2Na wash was discussed. The nitrogen removal efficiency of the Anammox reactor decreased significantly and eventually collapsed at the Nd(III) dosing levels of 20 and 40 mg L-1, respectively. And the toxicity of Nd(III) to AnAOB was determined by the amount internalized into the cells. The EDTA-2Na wash successfully increased the total nitrogen removal rate (TNRR) of Nd(III)-inhibited Anammox to 41.60% of its initial value within 30 days, and the modified Boltzmann model accurately simulated this recovery process. The transient and extended effects of Nd(III), self-recovery, and EDTA-2Na wash on Anammox were effectively assessed using a one-sample t-test. 16S rRNA gene sequencing indicated that Nd(III) remarkably decreased the relative abundance of Planctomycetes and Candidatus Brocadia. The scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) revealed crystal-like neodymium particles on the surface of Anammox sludge. The above-mentioned results demonstrate that the concentration of Nd(III) should be below the toxicity threshold (20 mg L-1) when treating ammonia wastewater containing neodymium by Anammox, and also emphasize the importance of an appropriate recovery strategy.

Insights into heavy metals shock on anammox systems: Cell structure-based mechanisms and new challenges

Anaerobic ammonium oxidation (anammox) as a low-carbon and energy-saving technology, has shown unique advantages in the treatment of high ammonia wastewater. However, wastewater usually contains complex heavy metals (HMs), which pose a potential risk to the stable operation of the anammox system. This review systematically re-evaluates the HMs toxicity level from the inhibition effects and the inhibition recovery process, which can provide a new reference for engineering. From the perspective of anammox cell structure (extracellular, anammoxosome membrane, anammoxosome), the mechanism of HMs effects on cellular substances and metabolism is expounded. Furthermore, the challenges and research gaps for HMs inhibition in anammox research are also discussed. The clarification of material flow, energy flow and community succession under HMs shock will help further reveal the inhibition mechanism. The development of new recovery strategies such as bio-accelerators and bio-augmentation is conductive to breaking through the engineered limitations of HMs on anammox. This review provides a new perspective on the recognition of toxicity and mechanism of HMs in the anammox process, as well as the promotion of engineering applicability.

A review of anammox metabolic response to environmental factors: Characteristics and mechanisms

Anaerobic ammonium oxidation (anammox) is a promising low carbon and economic biological nitrogen removal technology. Considering the anammox technology has been easily restricted by environmental factors in practical engineering applications, therefore, it is necessary to understand the metabolic response characteristics of anammox bacteria to different environmental factors, and then guide the application of the anammox process. This review presented the latest advances of the research progress of the effects of different environmental factors on the metabolic pathway of anammox bacteria. The effects as well as mechanisms of conventional environmental factors and emerging pollutants on the anammox metabolic processes were summarized. Also, the role of quorum sensing (QS) mediating the bacteria growth, gene expression and other metabolic process in the anammox system were also reviewed. Finally, interaction and cross-feeding mechanisms of microbial communities in the anammox system were discussed. This review systematically summarized the variations of metabolic mechanism response to the external environment and cross-feeding interactions in the anammox process, which would provide an in-depth understanding for the anammox metabolic process and a comprehensive guidance for future anammox-related metabolic studies and engineering applications.

Recovery Strategies for Heavy Metal-Inhibited Biological Nitrogen Removal from Wastewater Treatment Plants: A Review

Biological nutrient removal is an integral part of a wastewater treatment plant. However, the microorganism responsible for nutrient removal is susceptible to inhibition by external toxicants such as heavy metals which have the potential to completely inhibit biological nutrient removal. The inhibition is a result of the interaction between heavy metals with the cell membrane and the deoxyribonucleic acid (DNA) of the cell. Several attempts, such as the addition of pretreatment steps, have been made to prevent heavy metals from entering the biological wastewater systems. However, the unexpected introduction of heavy metals into wastewater treatment plants result in the inhibition of the biological wastewater treatment systems. This necessitates the recovery of the biological process. The biological processes may be recovered naturally. However, the natural recovery takes time; additionally, the biological process may not be fully recovered under natural conditions. Several methods have been explored to catalyze the recovery process of the biological wastewater treatment process. Four methods have been discussed in this paper. These include the application of physical methods, chelating agents, external field energy, and biological accelerants. These methods are compared for their ability to catalase the process, as well as their environmental friendliness. The application of bio-accelerant was shown to be superior to other recovery strategies that were also reviewed in this paper. Furthermore, the application of external field energy has also been shown to accelerate the recovery process. Although EDTA has been gaining popularity as an alternative recovery strategy, chelating agents have been shown to harm the metal acquisition of bacteria, thereby affecting other metabolic processes that require heavy metals in small amounts. It was then concluded that understanding the mechanism of inhibition by specific heavy metals, and understanding the key microorganism in the inhibited process, is key to developing an effective recovery strategy.

Effects of Heavy Metals on the Performance and Mechanism of Anaerobic Ammonium Oxidation for Treating Wastewater

Persistence of ammonium nitrogen and heavy metals in wastewater still remains a challenge, and many wastewater treatment plants face the challenge of removing nitrogen under heavy metal stresses. There is no preferred method for the biological treatment of wastewater containing nitrogen and heavy metals with the possible exception of the anaerobic ammonium oxidation (anammox), since it has shown promise for removing nitrogen under heavy metal stresses. This article reviews the recent research results of the nitrogen-removal performance and mechanism by the anammox process under heavy metal stresses, mainly discussing the enhancing and inhibition effects of heavy metals on the performance of the Anammox reactor. The influencing mechanism of heavy metals on the microbial community and extracellular polymeric substances is also presented, and examples are given for explanation. The main problems of the present research are pointed out, and it is proposed that unifying the metal ion concentrations of inhibiting or promoting anammox activity is necessary for the development and industrial application of the anammox process. The information of this review can offer a great possibility for achieving desired nitrogen removal in wastewater treatment under heavy metal stresses and with significant energy savings.

A novel process of salt tolerance partial denitrification and anammox (ST-PDA) for treating saline wastewater

In the study, the salt-tolerant partial denitrification and Anammox (ST-PDA) process was established, meanwhile, the feasibility of salinity inhibition model as the boundary control method and the subsequent operation performance were studied. Study indicated that the performance of salt-tolerant PD sludge was the optimum under the 10 g·L^-1 salinity, and AnAOB also maintained high activity at the salinity. Haldane and Aiba models verified that NO₃^--N (substrate) and FNA (product) would have negative consequences for performance of ST-PDA system. However, the effect of FNA would be eliminated by self-alkalization in the denitrification process. A 90% nitrogen removal rate was achieved and the average effluent total nitrogen of 17.8 mg·L^-1 was maintained in the system. The high throughput sequencing revealed that the species richness decreased with the salinity increased, while Thauera played a major role in nitrogen removal in saline environment. The study provides a novel insights for salt-containing industrial wastewater.

Adaptability of enhanced bioretention cell for nitrogen and phosphorus removal under two antibiotics stress

The overuse of antibiotics in the medical and aquaculture industries has led to the frequent detection of antibiotics in wastewater. Considering antibiotics would have an unknown impact on wastewater treatment in the future, the long-term effects of sulfamethoxazole (SMX) and tetracycline (TC) stress on the performance, functional genes and microbial community in three bioretention cells were investigated. The results showed that during the experiment, 0.8-1.2 mg/L of SMX would not destroy the water treatment capacity of the bioretention cells, and had a promoting effect on total nitrogen and ammonia nitrogen. 1.6 mg/L of SMX would cause the reduction of nitrogen removal efficiency and the phenomenon of phosphorus release, but it could be restored after a period of operation. TC of 0.8-1.2 mg/L did not have a significant impact on the removal of nutrients in AC-BRC (activated carbon-bioretention cell) and ACI-BRC (activated carbon and iron-bioretention cell), but TC of 1.2 mg/L caused the phenomenon of phosphorus release in BRC and the decrease of total nitrogen removal rate, 1.6 mg/L TC could make the bioretention cell lose its water treatment capacity. qPCR analysis of denitrification genes showed that the abundance of nirS, nirK, nosZ, and hzo had varying degrees of decrease before and after antibiotic stress, which meant the two antibiotics significantly inhibited the reduction of nitrite and nitrous oxide. But for the total number of bacteria, the relative abundance of the four genes has increased. The results of microbial community analysis also found that Proteobacteria, Bacteroidetes, Chloroflexi, and BIrii41, Denitratisoma, Ferritrophicum, Thiobacillus occupied the dominant species at the phylum level and the genus level respectively, which included most of the denitrifying bacteria. During the experiment, the nitrogen and phosphorus removal efficiency of AC-BRC and ACI-BRC were enhanced obviously, but ammonia nitrogen accumulated in ACI-BRC in the early stage of the reaction.

Inhibition of wastewater pollutants on the anammox process: A review

The anaerobic ammonium oxidation (anammox) process has been recognized as an efficient nitrogen removal technology. However, anammox bacteria are susceptible to surrounding environments and different pollutants, which limits the extensive application of the anammox process worldwide. Numerous researchers investigate the effects of various pollutants on the anammox process or bacteria, and related findings have also been reviewed with the focused on their inhibitory effects on process performance and microbial community. This review systemically summarized the recent advances in the inhibition, mechanism and recovery process of traditional and emerging pollutants on the anammox process over a decade, such as organics, metals, antibiotics, nanoparticles, etc. Generally, low-concentration pollutants exhibited a promotion on the anammox activity, while high-concentration pollutants showed inhibitory effects. The inhibitory threshold concentration of different pollutants varied. The combined effects of multipollutant also attracts more attentions, including synergistic, antagonistic and independent effects. Additionally, remaining problems and research needs are further proposed. This review provides a foundation for future research on the inhibition in anammox process, and promotes the proper operation of anammox processes treating different types of wastewaters.

Inhibition of anammox activity by municipal and industrial wastewater pollutants: A review

The use of the anammox process for nitrogen removal has gained popularity across the world due to its low energy consumption and waste generation. Anammox reactors have been used to treat ammonium-rich effluents such as chemical, pharmaceutical, semiconductor, livestock, and coke oven wastewater. Recently, full-scale installations have been implemented for municipal wastewater treatment. The efficiency of biological processes is susceptible to inhibitory effects of pollutants present in wastewater. Considering the increasing number of emerging contaminants detected in wastewater, the impacts of the different types of pollutants on anammox bacteria must be understood. This review presents a compilation of the studies assessing the inhibitory effects of different wastewater pollutants towards anammox activity. The pollutants were classified as antibiotics, aromatics, azoles, surfactants, microplastics, organic solvents, humic substances, biodegradable organic matter, or metals and metallic nanoparticles. The interactions between the pollutants and anammox bacteria have been described, as well as the interactions between different pollutants leading to synergistic effects. We also reviewed the effects of pollutants on distinct species of anammox bacteria, and the main toxicity mechanisms leading to irreversible loss of anammox activity have been identified. Finally, we provided an analysis of strategies to overcome the inhibitory effects of wastewater pollutants on the nitrogen removal performance. We believe this review will contribute with essential information to assist the operation and design of anammox reactors treating different types of wastewaters.

The effects of Fe(III) and Fe(II) on anammox process and the Fe-N metabolism

This study aims to compare the effects of different Fe stress on anammox (anaerobic ammonium oxidation) process, therefore seven identical reactors were operated under different Fe(II)/Fe(III) concentrations. After 38 days of operation, the anammox activity was highest (10.49 ± 0.41 mg-TN/(g-VSS·h)) under conditions of 5 mg/L-Fe(II), while under 30 mg/L-Fe(III) displayed severe inhibition. The results showed that continuous addition of 30 mg/L-Fe(III) would damage the composition of EPS (extracellular polymeric substances) and make anammox bacteria more sensitive to environmental stress. While high Fe(II) concentrations could result in precipitates encasing granular sludge, affecting substrate utilization. Moreover, the results of ΔNO₃^--N/ΔNH₄⁺-N indicated that Fe(II)-dependent nitrate reduction was induced in reactors added with Fe(II). OM27_clade and norank_f__Burkholderiaceae might be candidates for this process according to the correlation of genera and functional genes (based on the PICRUSt 2 functional prediction). Overall, this research is expected to provide new ideas to the effects of Fe(II)/Fe(III) on anammox and to the practical application of coupled system based on anammox in wastewater treatment.

Nitrogen removal performance of sulfur autotrophic denitrification under different S2O32- additions using isotopic fractionation of nitrogen and oxygen

The dual isotope fractionation of nitrogen (N) and oxygen (O) is an effective way to track the transformation of NO₃^--N in biological denitrification process. The Sulfur autotrophic denitrification combined with the different concentrations of S₂O₃^2- was investigated using the dual isotope fractionation of nitrogen (N) and oxygen (O) to reveal the nitrogen removal mechanism of the activated sludge. Based on successful autotrophic denitrification incubation, the modified Logistic model responded to the short-term effects of S₂O₃^2- addition on NO₃^--N removal and SO₄^2- generation. Under the S₂O₃^2- addition of 0.5, 1, 2 and 4 times of the incubation stage (49.29 mg/L-394.32 mg/L), the fractionation effect of N in NO₃^--N (¹⁵ε_NO3) decreased from 8.74 ± 1.81‰ to 2.08 ± 0.06‰, and the fractionation effect of O in NO₃^--N (¹⁸ε_NO3) declined from 11.34 ± 0.46‰ to 5.48 ± 0.46‰. The ¹⁵ε_NO3/¹⁸ε_NO3 was maintained at 0.46-0.94, indicating a negative correlation between addition amount and isotope effect, and the addition of high concentrations of S₂O₃^2- was not suitable for system stabilization. Moreover, the ¹⁸O-labeled H₂O (δ¹⁸O_H2O) tests significantly proved the presence of O exchange between NO₂^--N/NO₃^--N and H₂O (67%/97%) during the nitrogen removal process, while the reoxidation of NO₂^--N was explored in the autotrophic denitrification. The kinetic models coupled with isotope fractionation effectively revealed the nitrogen removal characteristics in the autotrophic denitrification systems, and verified the difference between the activated sludge-based wastewater treatment process and the natural ecosystem.