Sulfate radical-induced destruction of emerging contaminants using traces of cobalt ions as catalysts

PMS coupled Mn(II) mediated electrochemistry processes (E-Mn(II)-PMS) on the efficient RB19 wastewater treatment: Focus on the regulation and reinforcement of Mn(III)/Mn(II)

Dye wastewater, represented by reactive blue 19 (RB19), severely threatens the aquatic ecological environment and human health, such that an efficient RB19 wastewater treatment technology should be urgently developed. Based on manganese ion-mediated electrochemistry, PMS was introduced to develop a novel electrocatalytic system (E-Mn(II)-PMS) that can efficiently remove and degrade RB19. The synergistic effect between E, Mn(II), and PMS was verified in this study through comparative experiments of a wide variety of systems. The removal efficiency of RB19 reached 95.1% in 50 min under reasonable power consumption (3.29 kWh/m3). Moreover, the effects exerted by different operating conditions (e.g., initial pH, current density, RB19 concentration, Mn(II) concentration, as well as PMS concentration) and water matrix on the degradation efficiency of RB19 were explored through single factor experiments. The active oxidation species (ROS) and their contribution rate for the degrading and removing RB19 were studied through quenching experiments, EPR experiments, TMT-15 metal capture experiments, as well as PP complexation experiments. The role played by non-free radicals took on critical significance in the oxidation removal of RB19, which comprised direct electro oxidation, Mn(III) oxidation, and 1O2 oxidation. The enhancement effect of free radicals (SO4·- and HO∙) was not sufficiently significant, with a low degree of contribution. The oxidation effect of the anode facilitated the conversion of Mn (II) to Mn (III), which was employed in PMS for expediting the production of 1O2. The reduction effect of the cathode blocked the production of Mn (IV) as a side reaction, such that the continuous circulation of manganese ions between divalent and trivalent was promoted. Meanwhile, the cathode reacted with PMS to generate a small part of SO4·- and HO∙. In addition, the reaction active site of RB19 was predicted, and a possible degradation pathway was proposed in accordance with the mass spectrometry results and the DFT calculation. As revealed by the results of the QSAR analysis and the plant culture experiments, the biological toxicity of RB19 was markedly reduced after the sample was administrated with E-Mn(II)-PMS. E-Mn(II)-PMS-mediated electrochemical technology displays several advantages (e.g., high efficiency, low consumption, recyclability, wide pH window, and strong applicability) while showing promising market development and utilization for treating dye wastewater.

Insight into electrochemically boosted trace Co(II)-PMS catalytic process: Sustainable Co(IV)/Co(III)/Co(II) cycling and side reaction blocking

A novel homogeneous electrocatalytic system was constructed by current-assisted trace Co(II) activating PMS (ECP) to remove reactive blue 19 (RB19). More than 93 % of RB19 was rapidly removed with only a trace dose, and the PMS was 98.35 % utilized during the reaction. By exploring the active species and analyzing the PMS consumption, it was found that current strongly accelerated the Co(III)/Co(II) redox cycle by providing electrons to Co(III), and inhibited the side reaction thus improving the PMS utilization. Electric energy per order was very low, only 0.26 kWh·m³. Radicals (SO₄^•-) and non-radicals (Co(III), Co(IV) and ¹O₂) participated in ECP system, in which SO₄^•- was dominant. By excluding the other three precursors (PMS, •OH and O₂^•-), the side reaction product SO₅^•- was identified as the source of ¹O₂ in ECP system. Combining chelating agent EDTA and chemical probe PMSO, Co(IV) was considered formed by single and double charge transfer. Five degradation pathways of RB19 were proposed using mass spectrometry and DFT calculation. The ecotoxicity and mutagenicity of RB19 and its transformation products were predicted using software simulation. These studies provided an interesting insights into the synergistic Co(II)-PMS systems and offered a new strategy for electrochemical processes.

Peroxymonosulfate activation by oxygen vacancies-enriched MXene nano-Co3O4 co-catalyst for efficient degradation of refractory organic matter: Efficiency, mechanism, and stability

Cobalt-based catalysts have been widely explored in the degradation of organic pollutants based on peroxymonosulfate (PMS) activation. Herein, we report an MXene nano-Co₃O₄ co-catalyst enriched with oxygen vacancies (O_v) and steadily fixed in nickel foam (NF) plates, which is used as an efficient and stable PMS activator for the removal of 1,4-dioxane (1,4-D). Ti originating from MXene was doped into the Co₃O₄ crystal, generating large amounts of O_v, which could provide more active sites to enhance PMS activation and facilitate the transformation of Co²⁺ and Co³⁺, causing a high stability. As a result, the 1,4-D removal efficiency of the NF/MXene-Co₃O₄/PMS system (k_app: 2.41 min^-1) was about four times higher than that of the NF/Co₃O₄/PMS system (k_app: 0.62 min^-1). In addition, singlet oxygen was the predominant reactive oxygen species. Notably, the 1,4-D removal of the NF/MXene-Co₃O₄/PMS system was over 95% after 20 h operation in the single-pass filtration mode with only 3.72% accumulative Co leaching, showing excellent stability and reusability of NF/MXene-Co₃O₄. This work provides a defect engineering strategy to design a robust and stable catalytic system for water treatment, which expands the application of MXene in the field of environmental remediation.

Ultrafast degradation of contaminants in a trace cobalt(II) activated peroxymonosulfate process triggered through borate: Indispensable role of intermediate complex

Among all homogeneous catalysts, cobalt ions show the highest catalytic performance for the activation of peroxymonosulfate (PMS). Herein, we report a Co²⁺/PMS/H₃BO₃ system that can effectively generate reactive oxygen species (ROS) with ultra-low Co²⁺ dosage (5 μg/L). Co²⁺/PMS/H₃BO₃ system showed ultrafast reactivity and wide applicability for various pollutants. Sulfamethoxazole (SMX, 2 mg/L) could be completely removed within 5 min, and the corresponding k_obs reached up to 1.1239 min^-1. The introduction of H₃BO₃ significantly promoted the generation of ROS. The turnover frequency (TOF) calculated through dividing k_obs by the cobalt ions concentration is as high as 224.78 min^-1, which is much higher than most of the current research. Through a series of theoretical and experimental analyses, the complex of H₂BO₃^--MS (HSO₅B(OH)₃^-) was inferred to be the key substance that led to the excellent performance of the system. This work provides new insights into the Co²⁺/PMS system in the presence of borate buffer.

Single-Atom Cobalt Incorporated in a 2D Graphene Oxide Membrane for Catalytic Pollutant Degradation

We introduce a new graphene oxide (GO)-based membrane architecture that hosts cobalt catalysts within its nanoscale pore walls. Such an architecture would not be possible with catalysts in nanoscale, the current benchmark, since they would block the pores or alter the pore structure. Therefore, we developed a new synthesis procedure to load cobalt in an atomically dispersed fashion, the theoretical limit in material downsizing. The use of vitamin C as a mild reducing agent was critical to load Co as dispersed atoms (Co₁), preserving the well-stacked 2D structure of GO layers. With the addition of peroxymonosulfate (PMS), the Co₁-GO membrane efficiently degraded 1,4-dioxane, a small, neutral pollutant that passes through nanopores in single-pass treatment. The observed 1,4-dioxane degradation kinetics were much faster (>640 times) than the kinetics in suspension and the highest among reported persulfate-based 1,4-dioxane destruction. The capability of the membrane to reject large organic molecules alleviated their effects on radical scavenging. Furthermore, the advanced oxidation also mitigated membrane fouling. The findings of this study present a critical advance toward developing catalytic membranes with which two distinctive and complementary processes, membrane filtration and advanced oxidation, can be combined into a single-step treatment.

Peracids - New oxidants in advanced oxidation processes: The use of peracetic acid, peroxymonosulfate, and persulfate salts in the removal of organic micropollutants of emerging concern - A review

In recent years, there has been increasing interest in using of advanced oxidation processes in water and wastewater decontamination. As a new oxidants peracids, mainly peracetic acid (PAA) and peracid salts, i.e. peroxymonosulfate (PMS) and persulfate (PS) are used. The degradation process of organic compounds takes place with the participation of radicals, including hydroxyl (^•OH) and sulfate (SO₄^•-) radicals derived from the peracids activation processes. Peracids can be activated in homogeneous systems (UV radiation, d-electron metal ions, e.g. Fe²⁺, Co²⁺, Mn²⁺, base, ozonolysis, thermolysis, radiolysis), or using heterogeneous activation (metals with zero oxidation state, metal oxides, quinones, activated carbon, semiconductors). As a result of oxidation, products of a lower mass than the parent compounds, less toxic, and more susceptible to biodegradation are formed. An important task is to investigate the effect of the peracid activation method and matrix composition on the efficiency of contamination removal. The article presents the latest information about the application of peracids in the removal of organic micropollutants of emerging concern (mainly focuses on endocrine disrupted compounds). The most important information on peracetic acid, peroxymonosulfate and persulfate salts, and methods of their activation are presented. Current uses of these oxidants in organic micropollutants removal are also described. Information was collected on the factors influencing the oxidation process and the effectiveness of pollutant removal. This paper compares PAA, PMS and PS-based processes for the first time in terms of kinetics and efficiency.

Recent advances in cobalt-activated sulfate radical-based advanced oxidation processes for water remediation: A review

Sulfate radical-based advanced oxidation processes (SR-AOPs) have attracted increasing attention for the degradation of organic contaminants in water. The oxidants of SR-AOPs could be activated to generate different kinds of reactive oxygen species (ROS, e.g., hydroxyl radicals (OH), sulfate radicals (SO₄^-), singlet oxygen (¹O₂), and superoxide radicals (O₂^-)) by various catalysts. As one of the promising catalysts, cobalt-based catalysts have been extensively investigated in catalytic activity and stability during water remediation. This article mainly summarizes recent advances in preparation and applications of cobalt-based catalysts on peroxydisulfate (PDS)/peroxymonosulfate (PMS) activation since 2016. The review covers the development of homogeneous cobalt ions, cobalt oxides, supported cobalt composites, and cobalt-based mixed metal oxides for PDS/PMS activation, especially for the latest nanocomposites such as cobalt-based metal-organic frameworks and single-atom catalysts. This article also discussed the activation mechanisms and the influencing factors of different cobalt-based catalysts for activating PDS/PMS. Finally, the future perspectives on the challenges and applications of cobalt-based catalysts are presented at the end of this paper.

Preparation and application of a novel biochar-supported red mud catalyst：Active sites and catalytic mechanism

A novel catalyst RM-BC_(HP) was synthesized by hydrothermal treatment and pyrolysis (800 ℃) using red mud and coconut shells. Influence of different preparation conditions on catalyst performance was explored. SEM showed that RM-BC_(HP) was porous and RM was successfully loaded on the outside surface and inside the pores of BC. XRD revealed that Fe₂O₃ in RM was reduced to Fe⁰ and Fe₃O₄ in the pyrolysis process, in which pyrolysis temperature and addition ratio of coconut shells were critical. TGA-MS, FT-IR and XPS were also applied to character the catalyst. 100% of AO7 was removed within 30 min with conditions of 2 mM PS, 50 mg/L AO7 and 0.5 g/L RM-BC_(HP), and the Fe leaching was negligible. High removal rate was obtained in tap, river, and lake water. RM-BC_(HP)/PS system also exhibited excellent degradation performance for other dyes (MB, MG and RhB) and antibiotics (TC, OTC and CTC). The mechanism studies demonstrated that PS was mainly activated by Fe⁰ and Fe²⁺ in RM-BC_(HP) to produce different radicals, then ¹O₂ was generated by the reactions among these radicals to degrade AO7. Finally, nine intermediate products of AO7 were identified by FT-ICR-MS and a probable degradation pathway was proposed.

Enhancement of Removal of VOCs and Odors from Wood by Microwave-Activated Persulfate

Since traditional methods for removing volatile organic compounds (VOCs) from wood consume large amounts of energy and generate environmental pollution, it is desired to develop a convenient and green treatment method. Oxidation by microwave-activated persulfate (MW-PS) is a promising alternative method that has been used to eliminate VOCs from wood. The penetration of microwave energy can destroy the wood pit membranes and increase VOC emissions. The VOCs are further degraded by ·OH and SO₄ ^•-, which are generated via the activation of microwaves. This phenomenon can be detected by the electron paramagnetic resonance spectrometry. The 35 types of main VOCs of natural wood were determined, including alkanes/terpenes, alcohols/ethers, esters, aldehydes/ketones, and others. In the MW-PS system, 23 compounds were removed with an efficiency of 100%. Specifically, as one of the major compounds, the content of alkanes/terpenes was sharply decreased, and no alcohols/ethers and esters were detected. It was found that the optimal conditions of the MW-PS system for the minimum release of VOCs from wood were the microwave power of 462 W, irradiation time of 30 min, and PS dosage of 0.5 mmol/L.