Elucidating the catalytic degradation of enrofloxacin by copper oxide nanoparticles through the identification of the reactive oxygen species

A low-temperature co-treatment of diethylhexyl phthalate-rich polyvinyl chloride and waste copper catalyst by subcritical water (hydrothermal treatment): Dechlorination, recovery of diethylhexyl phthalate and copper

As one of the most widespread plastics in the world, the recycling of diethylhexyl phthalate-rich polyvinyl chloride (DEHP-rich PVC) faces great challenges because of the high levels of Cl and plasticizers. On the other hand, waste copper catalyst (WCC) discharged from various industrial processes is not effectively recycled. In this study, a significant synergistic effect between the DEHP-rich PVC and WCC was found in a subcritical water (SubCW) medium, and a co-treatment of the DEHP-rich PVC and WCC was developed by the SubCW process. The introduction of WCC significantly improved the dechlorination efficiency of the DEHP-rich PVC to 96.03 % at a low temperature of 250 °C. Under the optimal conditions, the leaching of copper from WCC reached a maximum of 81.08 %. Oil products included DEHP (55.7 %, GC peak area%), 3-methyl-3-heptene (37.3 %, GC peak area%), and 2-ethyl-1-hexanol (7.0 %, GC peak area%). The dechlorination pathways of the DEHP-rich PVC included hydroxyl substitution and direct dechlorination. HCl released from the DEHP-rich PVC led to a decrease in the pH of the system and significant copper leaching from the WCC. DEHP was decomposed by hydrolysis, dehydration, and rearrangement reaction by the SubCW co-treatment process. The enhancement mechanism of the WCC for the dechlorination of the DEHP-rich PVC was based on that the conversion of copper species in the SubCW promoted the formation of hydroxyl radicals and the hydroxyl substitution for chlorine in PVC molecular chain. The proposed SubCW low-temperature co-treatment could be a prospective strategy for the low-energy and synchronous recovery of the two different wastes of the DEHP-rich PVC and WCC.

Plant-based green fabrication of CuO-CdO-bentonite S-scheme heterojunction with enhanced photocatalytic performance for the degradation of levofloxacin

In this research, for the first time, CuO and CdO nanoparticles (NPs) were synthesized using Ferula persica and anchored on layered bentonite as a novel S-scheme nano-heterojunction (denoted as CuO-CdO-BT). Ferula persica acted as a naturally-sourced reducing agent and stabilizer for the synthesis of NPs. The performance of CuO-CdO-BT was evaluated for the degradation of levofloxacin from an aqueous solution under sunlight. The characterization results clarified that the bentonite as a support not only reduced the agglomeration of CuO and CdO NPs but also decreased the size of biosynthesized NPs, which increased the active surface of NPs and the photodegardation efficiency. The effect of operational reaction system variables was examined to optimize the photocatalytic capability of CuO-CdO-BT. Under optimum conditions (catalyst dosage = 0.4 g/L, LVF concentration = 10 mg/L and pH = 8), 96.11% of levofloxacin was degraded using CuO-CdO-BT after 30 min with degradation kinetic of 0.108 min-1, which was about 2.4 and 4.2 times higher than those of bare CuO and CdO NPs, respectively. The improvement of the photocatalytic degradation efficiency of CuO-CdO-BT compared to CuO and CdO NPs was due to preventing the recombination of charge carriers in the S-scheme system. The radical quenching experiments ascertained the generation of [Formula: see text]·OH, and [Formula: see text] species in the CuO-CdO-BT system, indicating that ·OH radicals have a more prominent role than [Formula: see text] and [Formula: see text] in the photocatalytic reaction. The six possible levofloxacin pathways of LVF degradation were suggested based on HPLC-MS analysis. Over 88.5% LVF was removed using CuO-CdO-BT after three catalyst reuse cycles, indicating a cost-effectiveness potential of the biosynthesized photocatalyst reusability. Almost complete mineralization of LVF was obtained by the CuO-CdO-BT photocatalyst after 180 min of reaction. Based on findings, the S-scheme mechanism of photo-generated electron-hole pairs transfer in the CuO-CdO-BT system was found. The unique structural features of the new generation of S-scheme heterojunction and green synthesis of NPs using plants provide promising photocatalysts to improve wastewater treatment.

Reversible Regulation of the Reactive Oxygen Species Level Using a Semiconductor Heterojunction

Here, we proposed a novel solution for reversible regulation of the reactive oxygen species (ROS) level using a semiconductor heterojunction. Two metal-based ROS scavengers containing n-type CeO₂ nanoparticles and n-type Cu-doped diatom biosilica (Cu-DBs) were integrated by a hydrothermal method to form a typical n-n semiconductor heterojunction (Ce/Cu-DBs). Unlike the control of the ROS level by a single ROS scavenger or ROS-generating agent, Ce/Cu-DBs could quickly eliminate ROS by cascade catalytic reaction, which readily switched to ROS generation through a near-infrared (NIR)-triggered photocatalytic effect. This NIR mediated ROS regulation system provided a noninvasive strategy for reversible control of the ROS level in vitro and in vivo. The Ce/Cu-DBs could relieve cellular oxidative stress by clearing local excessive ROS while inhibiting bacterial growth by increasing ROS levels under NIR radiation. Benefiting from the reversible regulatory effect of Ce/Cu-DBs, programmable healing of infected wounds was realized via on-demand anti-infection and inflammation reduction. This work provided a general method with highly spatiotemporal resolution to a remote and sustainable control ROS level, which had great potential for the biomedical field and regulation of chemical reactions.

Membranes for the life sciences and their future roles in medicine

Since the global outbreak of COVID-19, membrane technology for clinical treatments, including extracorporeal membrane oxygenation (ECMO) and protective masks and clothing, has attracted intense research attention for its irreplaceable abilities. Membrane research and applications are now playing an increasingly important role in various fields of life science. In addition to intrinsic properties such as size sieving, dissolution and diffusion, membranes are often endowed with additional functions as cell scaffolds, catalysts or sensors to satisfy the specific requirements of different clinical applications. In this review, we will introduce and discuss state-of-the-art membranes and their respective functions in four typical areas of life science: artificial organs, tissue engineering, in vitro blood diagnosis and medical support. Emphasis will be given to the description of certain specific functions required of membranes in each field to provide guidance for the selection and fabrication of the membrane material. The advantages and disadvantages of these membranes have been compared to indicate further development directions for different clinical applications. Finally, we propose challenges and outlooks for future development.

Nanoscale zerovalent copper (nZVC) catalyzed environmental remediation of organic and inorganic contaminants: A review

Over the past decade, the nano zerovalent copper has emerged as an effective nano-catalyst for the environment remediation processes due to its ease of synthesis, low cost, controllable particle size and high reactivity despite its release during the remediation process and related concentration dependent toxicities. However, the improvised techniques involving the use of supports or immobilizer for the synthesis of Cu⁰ has significantly increased its stability and motivated the researchers to explore the applicability of Cu⁰ for the environment remediation processes, which is evident from access to numerous reports on nano zerovalent copper mediated remediation of contaminants. Initially, this review allows the understanding of the various resources used to synthesize zerovalent copper nanomaterial and the structure of Cu⁰ nanoparticles, followed by focus on the reaction mechanism and the species involved in the contaminant remediation process. The studies comprehensively presented the application of nano zerovalent copper for remediation of organic/inorganic contaminants in combination with various oxidizing and reducing agents under oxic and anoxic conditions. Further, it was evaluated that the immobilizers or support combined with various irradiation sources originates a synergistic effect and have a significant effect on the stability and the redox properties of nZVC in the remediation process. Therefore, the review proposed that the future scope of research should include rigorous focus on deriving an exact mechanism for synergistic effect for the removal of contaminants by supported nZVC.

A new approach to study the degradation of the organic pollutants by A-doped MxOy/B photocatalysts

This work presents a new approach and a comprehensive mechanism to study the kinetics of the photodegradation of the organic pollutants. The vital role of various operational factors on the degradation of the organic pollutants is explained using this method. The proposed approach is based on the simple strategies and a powerful computational method. Two new variables "the effective concentration of photon" (I_eff) and "the effective concentration of the reactive centers" (RC) are defined to better understand the effect of operational parameters on the organic pollutant photodegradation. The optimum conditions of the photocatalytic degradation can be determined with the help of this method. This approach was used to study the kinetics of photodegradation of the organic pollutants on the [Formula: see text] photocatalysts. The provided mechanism has been examined with the some experimental data. The high correlations between the experimental data and the fitting results under different conditions prove this mechanism could be reliable.

Fe@Fe2O3-loaded biochar as an efficient heterogeneous Fenton catalyst for organic pollutants removal

With increased demand for various chemical raw materials, sudden pollution incidents are more prone to occur during their transportation and usage, threatening the environment and human health. In this study, discarded tea stalks were recycled into composite materials (FSC-X00: X represents the calcination temperature) by impregnating tea stalks in Fe²⁺ solution combined with subsequent calcination. X-ray diffractometer (XRD) and X-ray photoelectron spectroscopy (XPS) patterns verified the existence of Fe⁰ and Fe₂O₃, and Fe₂O₃ was gradually reduced to Fe⁰ when the calcination temperature was raised from 700 °C to 900 °C. FSC-X00 was adopted as a heterogeneous catalyst for activating H₂O₂ to quickly degrade phenol in the water system. The degradation experiments indicated that FSC-600 exhibited superior degradation performance for phenol (20 mg/L) within 5 min and 80% total organic carbon (TOC) removal rate at pH = 3 within 30 min. The effects of the calcination temperature, the pH value and the amount of H₂O₂ on the degradation efficiency were investigated. Competing experiments showed that fulvic acid (FA) and inorganic salts Na⁺ had little effect on the degradation performance. The FSC-600 catalyst can be reused by thermal reduction. In addition, it was found that FSC-600 has a good degradation effect on ciprofloxacin (CIP), norfloxacin (NOR) and enrofloxacin (ENR), indicating that FSC-600 catalysts are a promising candidate for quick degradation of organic pollutants by Fenton reaction. Electron paramagnetic resonance (EPR) spectra analysis indicated that •OH is the dominant reactive oxygen species (ROS) and part ¹O₂ from O₂ also participated in the degradation. This study provides an example of creating catalysts from organic solid waste for use in emergency treatment for phenol.

Green Synthesis of TiO2 Nanoparticles Using Acorus calamus Leaf Extract and Evaluating its Photocatalytic and In Vitro Antimicrobial Activity

Here, we present an innovative and creative sustainable technique for the fabrication of titania (TiO2) using Acorus calamus (A. calamus) leaf extract as a new biogenic source, as well as a capping and reducing agent. The optical, structural, morphological, surface, and thermal characteristics of biosynthesized nanoparticles were investigated using UV, FTIR, SEM, DLS, BET, and TGA-DSC analysis. The phase formation and presence of nanocrystalline TiO2 were revealed by the XRD pattern. FTIR analysis revealed conjugation, as well as the presence of Ti–O and O–H vibrational bands. The nanoparticles were noticed to be globular, with an average size of 15–40 nm, according to the morphological analysis, and the impact of size quantification was also investigated using DLS. The photocatalytic activity of bare, commercial P-25 and biosynthesized TiO2 (G-TiO2) nanoparticles in aqueous solution of rhodamine B (RhB) dye was investigated under visible light irradiation at different time intervals. The biosynthesized TiO2 nanoparticles exhibited strong photocatalytic activity, degrading 96.59% of the RhB dye. Different kinetic representations were utilized to analyze equilibrium details. The pseudo-first-order reaction was best suited with equilibrium rate constant (K1) and regression coefficients (R2) values 3.72 × 10−4 and 0.99, respectively. The antimicrobial efficacy of the prepared nanoparticles was investigated using the disc diffusion technique. Further, biosynthesized TiO2 showed excellent antimicrobial activity against the selected gram-positive staining (B. subtilis, S. aureus) over gram-negative (P. aeruginosa, E. coli) pathogenic bacteria in comparison to bare TiO2.

Assessment of Potential Toxicity of Onion-like Carbon Nanoparticles from Grilled Turbot Scophthalmus maximus L

Although the presence of foodborne nanoparticles was confirmed in grilled fish in a previous study, the evaluation of potential health risks of these NPs was insufficient. In the present study, the potential toxicity of onion-like carbon nanoparticles (OCNPs) separated from grilled turbot Scophthalmus maximus L. was evaluated using mouse osteoblasts cells model and zebrafish (Danio rerio) model. Cytotoxicity evaluation revealed that the OCNPs penetrated into the MC3T3-E1 cells without arousing cell morphology changes. No evident apoptosis or damage of cells was observed with increasing OCNPs’ concentration to 20 mg/mL. In the hemolysis test, OCNPs did not show an obvious hemolysis effect on red blood cells. In the acute toxicity test, the LC₅₀ value (212.431 mg/L) of OCNPs to zebrafish showed a weak acute toxicity. In subacute toxicity test, after exposure to OCNPs (30 mg/L, 40 mg/L) for 10 days, a significant increase of reactive oxygen species level of zebrafish was observed. Meanwhile, redundant ROS content caused inhibition to several antioxidant enzymes and induced lipid and protein peroxidation damages according to the upregulation of malondialdehyde and protein carbonyl levels. The chronic toxicity test results indicated that oxidative stress was only observed in the high concentration group of OCNPs-treated zebrafish.

NiP/CuO composites: Electroless plating synthesis, antibiotic photodegradation and antibacterial properties

This work reports a simple method to prepare nickel-phosphorus (Ni-P) alloy modified CuO (Ni-P/CuO) composite, which shows excellent performance in terms of photodegradation antibiotics, particularly regarding the antibacterial properties. The Ni-P/CuO composites were prepared via two steps. The first step was to produce CuO by the hydrothermal method and the second step was to grow Ni-P in-situ on the surface of CuO through electroless plating. After loading of Ni-P, the photocatalytic activity of CuO for the decomposition of antibiotics is significantly increased under visible light irradiation. The photocatalytic activity of Ni-P/CuO with 4 wt% Ni-P loading is 25 times higher than that of CuO. Compared with CuO, the antibacterial activity of Ni-P/CuO with 4 wt% Ni-P loading against Escherichia coli is strongly increased. Based on the photoluminescence and photocurrent measurements of CuO and Ni-P/CuO, Ni-P cocatalyst improves the separation and transfer of the photogenerated charge in CuO, and enhances the photocatalytic activity of antibacterial performance. This work reveals that using Ni-P as the cocatalyst can strengthen the photocatalytic performance of CuO, which has great application potential in water purification and antibacterial treatments.