Bimetallic metal-organic frameworks anchored corncob-derived porous carbon photocatalysts for synergistic degradation of organic pollutants

Coconut Shell Carbon Preparation for Rhodamine B Adsorption and Mechanism Study

Phosphoric acid is used as a chemical activator to prepare coconut shell carbon (PCSC), and for investigating rhodamine B (RhB) adsorption performance. The optimal conditions for the preparation of PCSC (calcined temperature, phosphoric acid concentration), and the influence of adsorption conditions (concentration, pH, etc.) on RhB and the recovery performance of optimal carbon are investigated. Experimental results show that when the amount of PCSC (600 °C, 2 h) is 0.2 g, the initial RhB concentration is 10 mg/L, pH = 6, and the adsorption time is 30 min, it can have 95.84% RhB adsorption efficiency. Liquid ultraviolet spectroscopy also supports this adsorption performance. Characterization data showed that hydroxyl and ester groups, aromatic structures, and PO43- existed on the surface of PCSC, and the amount decreased with increasing calcined temperature. PCSC has a BET (N2) surface area of 408.59 m2/g and has a micropore distribution, EDS-detected P content is 3.91%. SEM showed that the PCSC formed micropores which could better adsorb RhB. The kinetic and thermodynamic analysis of the adsorption of RhB by PCSC showed that the adsorption process was in accord with quasi-secondary kinetic equations and ΔGθ was between -1.65 and -18.75 kJ/mol. The adsorption was a physical adsorption and a spontaneous endothermic reaction, and the obtained PCSC sorption isotherms were classified as Langmuir-type. The RhB adsorption mechanism on PCSC includes pore diffusion, hydrogen bonding, and π-π conjugation. The PCSC prepared by H3PO4 modification has superior adsorption and recycling performance for RhB, providing a reference for the preparation of other biomass carbon materials for the treatment of dye wastewater.

Construction of Pillared-Layer Metal-Organic Frameworks as an All-Visible-Light Switchable Photocatalyst for Aqueous Cr(VI) Reduction

Recently, two-dimensional metal-organic frameworks that are photoactive have shown great potential for efficiently converting solar energy into chemical energy. In this work, we successfully synthesized and designed two M2-MOFs ([Cu(L1)((CH3)2NH)]n (Cu-MOF) and [Zn(L1)(CH3)2NH)]n (Zn-MOF), H2L1 = 4,4'-(benzo[c][1,2,5]thiadiazole-4,7-diyl)dibenzoic acid). Structural analysis suggests that the five-coordinated M(II) ion is surrounded by four oxygen ions from two ligands and one nitrogen atom from one dimethylamine molecule. The ligand spacer acts as a bridge between two SBUs and forms a 2D layer with rhomboid windows. These moieties are arranged in a staggered ABAB pattern, which likely aids in exfoliation. The UV-vis diffuse reflectance spectra (DRS) test shows that when the metal center in the MOF framework is replaced with Cu(II) ions, the light absorption range covers 200-1100 nm, which is much larger than the light absorption range of Zn-MOF. Moreover, the photoelectric current, electrochemical impedance spectra (EIS), and Mott-Schottky tests all indicate that Cu-MOF has better photoelectric properties. When applied to the photocatalytic reduction of Cr(VI), Cu-MOF and Zn-MOF can completely reduce Cr(VI) within 100 min under 450 nm LED light irradiation. Under sunlight irradiation, Cu-MOF can completely reduce Cr(VI) within 40 min, achieving the removal of Cr(VI) ions, which is much faster than the rate of Cr(VI) removal by Zn-MOF.

Bimetallic Ag/Fe-MOG derived flake-like Ag2O/Fe2O3 p-n heterojunction for efficient photodegradation organic pollutants within a wide pH range

In this paper, we reported a facile and clean strategy to prepare the flake-like Ag2O/Fe2O3 bimetallic p-n heterojunction composites for photodegradation organic pollutants. The surface morphology, crystal structure, chemical composition and optical properties of Ag2O/Fe2O3 were characterized by SEM, high-resolution TEM images with EDX spectra, XRD, XPS, FT-IR and UV-vis DRS spectra respectively. The formation of Ag2O/Fe2O3 p-n heterojunction facilitated the interfacial transfer of electrons as well as the separation of charge carries. Hence, the as-synthesized Ag2O/Fe2O3-3 composites exhibited ultra-high photocatalytic activity. Under the experimental conditions of catalyst dosage of 0.4 mg mL-1 and irradiation time of 60 min, the degradation conversion rate of rhodamine B reached 96.1 %, which was 5.0 and 2.8 times of pure phase Ag2O and Fe2O3, respectively. Meanwhile, the degradation performance of Ag2O/Fe2O3-3 was not limited by pH, and it can achieve high degradation efficiency under 3-11. In addition, Ag2O/Fe2O3-3 also showed superb degradation ability for other common anionic dyes, cationic dyes and antibiotics. XPS and FT-IR spectra showed that Ag2O/Fe2O3-3 retained a carbon skeleton that facilitated electron transport and light absorption conversion. And the analyses of quenching experiment and EPR demonstrated •O2-, •OH and h+ were crucial reactive oxidant species contributing to the rapid organic pollutant degradation. This work provides new insights into obtaining p-n photocatalysts heterojunction with excellent catalytic activity for removing organic pollutants from wastewater.

The use of bimetallic metal-organic frameworks as restoration materials for pollutants removal from water environment

Bimetallic metal-organic frameworks (BMOFs) are a class of functional porous materials constructed by coordination between nodes containing two different metal ions and organic ligands. Studies have shown that the catalytic activity of BMOFs is greatly improved owing to the adjustment of charge distribution and the increase of active sites as well as the synergistic effect between the bimetals, and the advantages of their large specific surface area, high porosity, unique structure and dispersed active centres make them available as important organic materials applied in the field of wastewater treatment. In this review, the preparation and construction methods for BMOFs in recent years are summarized, and we focus on their removal of different types of pollutants in the aqueous environment, including ions, dyes, pharmaceuticals or personal care products, phenolic compounds and microorganisms, as well as their corresponding removal mechanisms. In addition, we provide an outlook on their future opportunities and challenges in wastewater treatment.

A signal-switchable photoelectrochemical biosensor for ultrasensitive detection of long non-coding RNA in cancer cells

Long non-coding RNA (LncRNA) as an emerging tumor biomarker plays a key factor in the early diagnosis of cancer. Herein, an innovative signal-switchable photoelectrochemical (PEC) biosensor based on ZrO2@CuO bimetallic oxides and T7 Exo-assisted signal amplification is reported for the ultrasensitive and selective detection of lncRNA (HOX gene antisense intergenic RNA, HOTAIR) in cancer cells. Firstly, MOFs-derived TiO2 nanodisks as an excellent photoactive material show an anodic background signal. When target lncRNA exists, the abundant auxiliary DNA1 is freed from T7 Exo-assisted cycle signal amplification, and then competitively hybridizes with auxiliary DNA2 on the electrode. Subsequently, bimetallic MOFs-derived ZrO2@CuO octahedra with a high specific surface area and porous structure are introduced into TiO2 nanodisks-modified biosensor, which appears a cathodic photocurrent and achieves a switchable signal. The developed signal-switchable PEC biosensor shows ultrasensitive detection of lncRNA HOTAIR with a detection limit of 0.12 fM, and can eliminate the false interference. Importantly, the established PEC biosensor has good correlation with RT-qPCR analysis (P < 0.05) for the quantification of lncRNA HOTAIR in cancer cells, which has great potential application for biomarker detection in the early diagnosis of cancer.

In-situ synthesis of ZIF-8 on magnetic pineapple leaf biochar as an efficient and reusable adsorbent for methylene blue removal from wastewater

The presence of organic dyes in aquatic systems poses a significant threat to ecosystems and human well-being. Due to recycling challenges, traditional commercial activated carbon is not cost-effective. To address this, an imidazolate acid zeolite framework-8 (ZIF-8)-modified magnetic adsorbent (ZMPLB-800) was synthesized through the in-situ formation of ZIF-8 and subsequent carbonization at 800 °C, using magnetic pineapple leaf biochar (MPLB) as a carrier. The porous structure of ZMPLB-800 facilitates the rapid passage of dye molecules, enhancing adsorption performance. ZMPLB-800 exhibited remarkable adsorption capacity for methylene blue (MB) across a pH range of 3-13, with a maximum adsorption capacity of 455.98 mg g-1. Adsorption kinetics and thermodynamics followed the pseudo-second-order kinetic model and Langmuir isotherm model. Mechanisms of MB adsorption included pore filling, hydrogen bonding, electrostatic interactions, π-π interactions, and complexation through surface functional groups. Additionally, ZMPLB-800 demonstrated excellent regeneration performance, recording a removal efficiency exceeding 87% even after five adsorption/desorption cycles. This study provides a novel strategy for treating dye wastewater with MOF composites, laying the foundation for waste biomass utilization.

RGO-Induced Flower-like Ni-MOF In Situ Self-Assembled Electrodes for High-Performance Hybrid Supercapacitors

Currently, the primary bottlenecks that hinder the widespread application of supercapacitors are low energy density and narrow potential windows. Herein, the hybrid supercapacitor with high energy density and wide potential window is constructed via an in situ self-assembly method employing RGO-induced flower-like MOF(Ni). Benefiting from the synergistic effect between RGO and MOF(Ni), the interfacial interactions are effectively improved, and the contact area with the electrolyte is enhanced, which increases the ion transfer kinetics and overall electrochemical performance. The MOF(Ni)@RGO electrode exhibits a specific capacitance of 1267.73 F g-1 at a current density of 1 A g-1. Crucially, the assembled MOF(Ni)@RGO//BC with a broad potential window and good stability employing a MOF(Ni)@RGO anode and biomass carbon cathode, combined with a 2 M PVA-KOH gel-electrolyte, achieves a maximum energy density of 70.16 Wh kg-1 at a power density of 2200.09 W kg-1, outperforming most reported supercapacitors. This hybrid supercapacitor exhibits excellent stability and high energy density, providing a novel strategy for further large-scale applications.

New Transition Metal Coordination Polymers Derived from 2-(3,5-Dicarboxyphenyl)-6-carboxybenzimidazole as Photocatalysts for Dye and Antibiotic Decomposition

Coordination polymers (CPs) are an assorted class of coordination complexes that are gaining attention for the safe and sustainable removal of organic dyes from wastewater discharge by either adsorption or photocatalytic degradation. Herein, three different coordination polymers with compositions [Ni(HL)(H2O)2·1.9H2O] (1), [Mn3(HL)(L)(μ3-OH)(H2O)(phen)2·2H2O] (2), and [Cd(HL)4(H2O)]·H2O (3) (H3L = 2-(3,5-dicarboxyphenyl)-6-carboxybenzimidazole; phen = 1,10-phenanthroline) have been synthesized and characterized spectroscopically and by single crystal X-ray diffraction. Single crystal X-ray diffraction results indicated that 1 forms a 2D layer-like framework, while 2 exhibits a 3-connected net with the Schläfli symbol of (44.6), and 3 displays a 3D supramolecular network in which two adjacent 2D layers are held by π···π interactions. All three compounds have been used as photocatalysts to catalyze the photodegradation of antibiotic dinitrozole (DTZ) and rhodamine B (RhB). The photocatalytic results suggested that the Mn-based CP 2 exhibited better photodecomposition of DTZ (91.1%) and RhB (95.0%) than the other two CPs in the time span of 45 min. The observed photocatalytic mechanisms have been addressed using Hirshfeld surface analyses.

Nitrogen-doped graphene for tetracycline removal via enhancing adsorption and non-radical persulfate activation

Nitrogen-doped graphene (NG) was synthesized via direct thermal annealing treatment. The obtained NG showed outstanding removal ability for tetracycline (TC) ascribed to enhanced adsorption and persulfate activation. The maximum TC adsorption capacity calculated from the Langmuir model of NG was 227.3 mg/g, which was 1.66 times larger than nitrogen-free graphene. The coexistence of NG and persulfate (PS) exhibited complete degradation of TC within 120 min attributed to the successful modification of nitrogen. Further analysis demonstrated that non-radical electron transfer was the dominant degradation pathway, which was different from the widely acknowledgeable radical mechanism. An electron donor-mediator-acceptor system was introduced, in which TC, NG, and PS performed as electron donor, mediator, and acceptor, respectively. The potential intermediates in the TC degradation process were detected and toxicity assessment was also performed. In addition, more than 75.8% of total organic carbon was removed, and excellent reusability was manifested in multiple adsorption and degradation experiments.

Nano-architecture of MOF (ZIF-67)-based Co3O4 NPs@N-doped porous carbon polyhedral nanocomposites for oxidative degradation of antibiotic sulfamethoxazole from wastewater

Co₃O₄ NPs in N-doped porous carbon (Co₃O₄ NPs@N-PC) materials were prepared by one-pot pyrolysis of a ZIF-67 powder under N₂ atmosphere and followed by oxidation under air atmosphere (200 °C) toward promotion catalytic activity and activation of peroxymonosulfate (PMS) to degradation sulfamethoxazole (SMZ). 2-methylimidazole was used as a nitrogen source and a competitive ligand for the synthesis of Co₃O₄ NPs@N-PC, which in addition to affecting nucleation and growth of the crystal, promotes the production of active Co-N sites. Co₃O₄ NPs@N-PC nano-architecture has high specific surface areas (250 m² g^-1) and is a non-toxic, effective and stable PMS activator. The effect of operating parameters including SMZ concentration, catalyst dosage, temperature and pH in the presence of Co₃O₄ NPs@N-PC was investigated. The Co₃O₄ NPs@N-PC composite showed superior performance in activating PMS over a wide range of pH (2-10) and different temperatures so that complete degradation of SMZ (50 μM, 100 mL) was achieved within 15 min. The role of Co^2+/Co³⁺ redox system in the mechanism before and after PMS activation was determined using XPS analysis. Surface-generated radicals led to the degradation of SMZ, in which the SMZ degradation rate attained 0.21 min^-1 with the mineralization of 36.8%. The feasible degradation mechanism of SMZ was studied in the presence of different scavengers and it was revealed that the degradation reaction proceeds from the radical/non-radical pathway and in this process most of the SO₄^- and OH radicals are dominant. The recoverability and reuse of Co₃O₄ NPs@N-PC were evaluated to confirm its stability and potential for SMZ degradation and it was observed that the catalyst maintains its catalytic power for at least 5 cycles.

Recent advances in waste-derived functional materials for wastewater remediation

Water pollution is a major concern for public health and a sustainable future. It is urgent to purify wastewater with effective methods to ensure a clean water supply. Most wastewater remediation techniques rely heavily on functional materials, and cost-effective materials are thus highly favorable. Of great environmental and economic significance, developing waste-derived materials for wastewater remediation has undergone explosive growth recently. Herein, the applications of waste (e.g., biowastes, electronic wastes, and industrial wastes)-derived materials for wastewater purification are comprehensively reviewed. Sophisticated strategies for turning wastes into functional materials are firstly summarized, including pyrolysis and combustion, hydrothermal synthesis, sol-gel method, co-precipitation, and ball milling. Moreover, critical experimental parameters within different design strategies are discussed. Afterward, recent applications of waste-derived functional materials in adsorption, photocatalytic degradation, electrochemical treatment, and advanced oxidation processes (AOPs) are analyzed. We mainly focus on the development of efficient functional materials via regulating the internal and external characteristics of waste-derived materials, and the material's property-performance correlation is also emphasized. Finally, the key future perspectives in the field of waste-derived materials-driven water remediation are highlighted.

Advancements in visible light responsive MOF composites for photocatalytic decontamination of textile wastewater: A review

Heterogeneous photocatalysis using metal-organic frameworks (MOFs) is expected to provide a pivotal solution for the remediation of toxic dyes and heavy metals from textile wastewater. However, MOFs often suffer from a low removal efficiency, due to the rapid recombination between holes and electrons, generated upon photoexcitation. Additionally, the MOFs exhibit poor water stability, which restricts their large-scale application. In this regard, various approaches (i.e. doping of metal nanoparticle, semiconductor, quantum dot, and ligand functionalization) have been adopted for the formation of multifunctional composites. The MOF-composites possess suitable photochemical, surface, optical, and electronic properties, resulting in enhanced water stability, visible light absorption, and reduced recombination between photogenerated species. This comprehensive review targets to provide an insight into the synthesis and subsequent application of various MOF composites for photocatalytic removal of organic contaminants (dyes) and inorganic (Cr(VI)) contaminants from water. MOFs/graphene oxide composites possess improved surface area and reusability whereas noble metal incorporated MOFs composites suffer from photocorrosion and are relatively costly. Zr and Ti based MOFs exhibit tuning from UV to visible light response and surpass the poor water stability upon binary/ternary composite formation. The role of the dopants in enhancing the efficiency of the composites; the effect of influencing factors such as solution pH, pollutant concentration; the mechanism, and the kinetics of reactions have been outlined. In spite of many advancements, the article also summarizes some roadblocks that need to be unraveled to achieve the energy-water-environment nexus and scope for future breakthrough research in this field.

Recent advances in performance improvement of Metal-organic Frameworks to remove antibiotics: Mechanism and evaluation

Antibiotic pollution is a serious global problem, which may threaten the health of human and ecosystem. Thereinto, water pollution is the most common way. Thus, it is necessary to develop effective methods to remove antibiotics from the natural aqueous environments. Metal-organic Frameworks (MOFs) - based adsorption and photocatalysis strategies have been demonstrated to be efficient, environmental and promising methods to solve antibiotic pollution and repair the environment. In this review, several strategies to improve the properties of MOFs for removal were summarized and discussed. And the removal mechanisms were also discussed. Besides, new and more reliable evaluation methods of MOFs to remove antibiotics were presented, including preferential adsorption (q_p), quantum yields (QY), space time yields (SY) and figure of merit (FOM). This paper provides alternative perspectives for researchers to improve the properties of MOFs and raise analytic efficiency of antibiotic removal.

Synergetic effect of photocatalysis and peroxymonosulfate activated by MIL-53Fe@TiO2 for efficient degradation of tetracycline hydrochloride under visible light irradiation

The MIL-53Fe was prepared by simple solvothermal method, and the MIL-53Fe photocatalysts showed lower photocatalytic activity for the degradation of tetracycline hydrochloride under visible light irradiation. After combined with TiO2,...

Adsorptive removal of dyes from wastewater using a metal-organic framework: A review

Water pollution from synthetic dyes is a growing environmental concern because many dyes have carcinogenic effects on humans and aquatic life. Adsorption is a widely used technology for the separation and removal of dyes from wastewater. However, the dye removal process using conventional adsorbents is not sufficiently efficient for industrial wastewater. Metal-organic frameworks (MOFs) addresses these drawbacks. MOF showed excellent dye removal and degradation capacity owing to its multifunctionality, water-stability, large surface area, tunable pore size and recyclability. Magnetic MOFs retained excellent performance up to several consecutive cycles. Modified MOFs performed as Fenton-like catalysis process which generated abundant reactive radicals that degraded complex organic dyes into simple and less toxic forms which were further adsorbed onto the MOF. This review systematically compiles in-depth studies on the adsorptive removal of dyes from wastewater, MOF adsorption mechanisms, major influencing factors, to adsorption efficiency of MOFs. While all MOFs adsorb dyes through electrostatic attraction, the type of MOF, presence of functional groups, ligands, and pH significantly control the adsorption mechanism. Before developing an MOF, optimization and upgradation of factors and interaction between available adsorption site and adsorbate is needed. Finally, the prospects and new frontiers of MOFs in sustainable water treatment is discussed.

Integrated Instillation Technology for the Synthesis of a pH-Responsive Sodium Alginate/Biomass Charcoal Soil Conditioner for Controlled Release of Humic Acid and Soil Remediation

In this work, pH-responsive gel spheres for controlled release of humic acid (CSGCHs) were prepared by an integrated instillation technology using a composite material of sodium alginate (SA) and charcoal activated carbon (CAC) as a carrier, and their slow-release performance, pH-responsive performance, and soil amendment performance were investigated. The results showed that the prepared CSGCH was uniform in size with obvious base responsiveness. Soil remediation experiments revealed that CSGCH could play a good role in the remediation of different types of soils. After 50 days of remediation, the content of nutrients and organic matter in the soil increased significantly and the pH and salt content of saline soils decreased by 15.2 and 29.8%, respectively. The plant experiment showed that CSGCH could effectively promote the growth of crops. Therefore, the prepared soil conditioner has a great potential value for improving soil conditions and promoting crop growth in agricultural applications.

Simultaneous introduction of oxygen vacancies and hierarchical pores into titanium-based metal-organic framework for enhanced photocatalytic performance

Photo-generated radicals play an important role in photocatalytic reactions, yet numerous radicals undergo self-quenching before contact with the substrate because of their ultrafast lifetimes and limited diffusion distances, which decreases the utilization of free radicals and reduces the activity of photocatalysts. Herein, both hierarchical pores and oxygen vacancies (OVs) were successfully introduced into a titanium-based metal-organic framework (MOF), namely MIL-125-NH₂ (MIL for Materials of Institut Lavoisier), via a simple and controllable acid etching method. The generation of OVs increased the yield of photogenerated radicals, while the hierarchical pore structure conferred a pore enrichment effect, thus enhancing the utilization of photogenerated radicals. Owing to the synergistic effect of the hierarchical pores and OVs, the obtained single-crystal nanoreactor, H-MIL-125-NH₂-V_O, showed much higher catalytic activity for rhodamine (RhB) degradation than pristine MIL-125-NH₂. In fact, the rate constant for catalytic RhB degradation in H-MIL-125-NH₂-V_O was approximately eight times that of MIL-125-NH₂. This work highlights the significant contribution of both hierarchical pores and OVs to enhancing the photocatalytic performance of MOFs.

The construction of NiFeSx/g-C3N4 composites with high photocatalytic activity towards the degradation of refractory pollutants

In this work, a novel NiFe layered double hydroxide-derived sulfide (NiFeSx)-modified g-C3N4 nanosheet photocatalyst (NiFeSx/g-C3N4) was synthesized, and its morphology, structure and visible light absorption capacity were simultaneously characterized by XRD, SEM, TEM, FT-IR, XPS, UV-Vis DRS, PL techniques and EIS Nyquist plots. Furthermore, it was discovered that at an optimum mass ratio of 3% (NiFeSx to g-C3N4), 3% NiFeSx/g-C3N4 composites exhibited the best degradation efficiency toward tetracycline hydrochloride refractory pollutants. The degradation rate of tetracycline hydrochloride by 3% NiFeSx/g-C3N4 composites was 92.54% under 70 min of visible light illumination, which was about 2.61 times higher than that of pure g-C3N4. The improved degradation activity may be attributed to the synergistic effect between the two constituents of as-synthesized composites, and the formed heterojunction reduced the efficiency of photogenerated carriers. More importantly, this work also gives some inspiration to synthesize some similar photocatalysts for a targeted environmental remediation.

A rational study on the geometric and electronic properties of single-atom catalysts for enhanced catalytic performance

We investigate the geometric and electronic properties of single-atom catalysts (SACs) within metal-organic frameworks (MOFs) with respect to electrocatalytic CO2 reduction as a model reaction. A series of mid-to-late 3d transition metals have been immobilised within the microporous cavity of UiO-66-NH2. By employing Rietveld refinement of new-generation synchrotron diffraction, we not only identified the crystallographic and atomic parameters of the SACs that are stabilised with a robust MN(MOF) bonding of ca. 2.0 Å, but also elucidated the end-on coordination geometry with CO2. A volcano trend in the FEs of CO has been observed. In particular, the confinement effect within the rigid MOF can greatly facilitate redox hopping between the Cu SACs, rendering high FEs of CH4 and C2H4 at a current density of -100 mA cm-2. Although only demonstrated in selected SACs within UiO-66-NH2, this study sheds light on the rational engineering of molecular interactions(s) with SACs for the sustainable provision of fine chemicals.

Microwave Hydrothermally Synthesized Metal-Organic Framework-5 Derived C-doped ZnO with Enhanced Photocatalytic Degradation of Rhodamine B

C-doped ZnO particles have been successfully prepared by the calcination using microwave hydrothermally prepared metal-organic framework-5 (MOF-5) as the precursor. MOF-5 was turned into C-doped ZnO through calcination at 500 °C, and its cubic shape was well-maintained. X-ray photoelectron spectroscopic studies confirmed the C-doping in the ZnO. The as-prepared C-doped ZnO demonstrated a Rhodamine B (RhB) degradation efficiency of 98% in 2 h under an solar-simulated light irradiation, much higher than that of C-doped ZnO derived from MOF-5 synthesized by the ordinary hydrothermal method. The trapping experiment revealed that the crucial factors in the RhB removal were photogenerated h⁺ and •O₂^-.