Nitrogen-deficient g-C3Nx/POMs porous nanosheets with P-N heterojunctions capable of the efficient photocatalytic degradation of ciprofloxacin

Antibiotic ciprofloxacin removal from aqueous solutions by electrochemically activated persulfate process: Optimization, degradation pathways, and toxicology assessment

Ciprofloxacin (CIP) is a commonly used antibiotic in the fluoroquinolone group and is widely used in medical and veterinary medicine disciplines to treat bacterial infections. When CIP is discharged into the sewage system, it cannot be removed by a conventional wastewater treatment plant because of its recalcitrant characteristics. In this study, boron-doped diamond anode and persulfate were used to degrade CIP in an aquatic solution by creating an electrochemically activated persulfate (EAP) process. Iron was added to the system as a coactivator and the process was called EAP+Fe. The effects of independent variables, including pH, Fe2+, persulfate concentration, and electrolysis time on the system were optimized using the response surface methodology. The results showed that the EAP+Fe process removed 94% of CIP under the following optimum conditions: A pH of 3, persulfate/Fe2+ concentration of 0.4 mmol/L, initial CIP concentration 30 mg/L, and electrolysis time of 12.64 min. CIP removal efficiency was increased from 65.10% to 94.35% by adding Fe2+ as a transition metal. CIP degradation products, 7 pathways, and 78 intermediates of CIP were studied, and three of those intermediates (m/z 298, 498, and 505) were reported. The toxicological analysis based on toxicity estimation software results indicated that some degradation products of CIP were toxic to targeted animals, including fathead minnow, Daphnia magna, Tetrahymena pyriformis, and rats. The optimum operation costs were similar in EAP and EAP+Fe processes, approximately 0.54 €/m3.

Recent progresses in synthesis and modification of g-C3N4 for improving visible-light-driven photocatalytic degradation of antibiotics

Graphitic carbon nitride (g-C3N4) is a widely studied visible-light-active photocatalyst for low cost, non-toxicity, and facile synthesis. Nonetheless, its photocatalytic efficiency is below par, due to fast recombination of charge carriers, low surface area, and insufficient visible light absorption. Thus, the research on the modification of g-C3N4 targeting at enhanced photocatalytic performance has attracted extensive interest. A considerable amount of review articles have been published on the modification of g-C3N4 for applications. However, limited effort has been specially contributed to providing an overview and comparison on available modification strategies for improved photocatalytic activity of g-C3N4-based catalysts in antibiotics removal. There has been no attempt on the comparison of photocatalytic performances in antibiotics removal between modified g-C3N4 and other known catalysts. To address these, our study reviewed strategies that have been reported to modify g-C3N4, including metal/non-metal doping, defect tuning, structural engineering, heterostructure formation, etc. as well as compared their performances for antibiotics removal. The heterostructure formation was the most widely studied and promising route to modify g-C3N4 with superior activity. As compared to other known photocatalysts, the heterojunction g-C3N4 showed competitive performances in degradation of selected antibiotics. Related mechanisms were discussed, and finally, we revealed current challenges in practical application.

Clinical nursing value of predictive nursing in reducing complications of pregnant women undergoing short-term massive blood transfusion during cesarean section

BACKGROUND

Cesarean hemorrhage is one of the serious complications, and short-term massive blood transfusion can easily cause postoperative infection and physical stress response. However, predictive nursing intervention has important clinical significance for it.

AIM

To explore the effect of predictive nursing intervention on the stress response and complications of women undergoing short-term mass blood transfusion during cesarean section (CS).

METHODS

A clinical medical record of 100 pregnant women undergoing rapid mass blood transfusion during sections from June 2019 to June 2021. According to the different nursing methods, patients divided into control group (n = 50) and observation group (n = 50). Among them, the control group implemented routine nursing, and the observation group implemented predictive nursing intervention based on the control group. Moreover, compared the differences in stress response, complications, and pain scores before and after the nursing of pregnant women undergoing rapid mass blood transfusion during CS.

RESULTS

The anxiety and depression scores of pregnant women in the two groups were significantly improved after nursing, and the psychological stress response of the observation group was significantly lower than that of the control group (P < 0.05). The heart rate and mean arterial pressure (MAP) of the observation group during delivery were lower than those of the control group, and the MAP at the end of delivery was lower than that of the control group (P < 0.05). Moreover, different pain scores improved significantly in both groups, with the observation group considerably less than the control group (P < 0.05). After nursing, complications such as skin rash, urinary retention, chills, diarrhea, and anaphylactic shock in the observation group were 18%, which significantly higher than in the control group (4%) (P < 0.05).

CONCLUSION

Predictive nursing intervention can effectively relieve the pain, reduce the incidence of complications, improve mood and stress response, and serve as a reference value for the nursing of women undergoing rapid mass transfusion during CS.

Highly efficient catalytic ozonation degradation of levofloxacin by facile hydrogenation-modified red mud wastes

Iron-rich red mud (RM) is a potential catalyst. However, as industrial waste, is strongly alkaline, low effectiveness, and safety concerns are problems that cannot be ignored, it is urgent to mine out a reasonable disposal and utilization technology for the waste. In this study, an effective catalyst (H-RM) was obtained by facile hydrogenation heating modification of red mud. Then above-prepared H-RM was applied in the catalytic ozonation degradation of levofloxacin (LEV). The H-RM exhibited more remarkable catalytic activities than the RM in terms of LEV degradation, and the optimal efficiency can reach over 90% within 50 min. The mechanism experiment proved that the concentration of dissolved ozone and hydroxyl radical (•OH) significantly increased, which enhanced the oxidation effect. Hydroxyl radical played a dominant role in the degradation of LEV. In the safety test, it is concluded that the concentration of total hexavalent chromium (total Cr(Ⅵ)) in the H-RM catalyst decreases and the leaching concentration of water-soluble Cr(Ⅵ) in aqueous solution is low. The results indicated that the hydrogenation technique is an available Cr (Ⅵ) detoxification method for RM. Moreover, the H-RM has excellent catalytic stability, which is beneficial to recycling and maintains high activity. This research provides an effective means to fulfill the reuse of industrial waste as an alternative to standard raw materials, and comprehensive utilization of the waste to attain the purpose of treating pollution with wastes.

Highly Efficient Catalytic Oxidative Desulfurization of Dibenzothiophene using Layered Double Hydroxide Modified Polyoxometalate Catalyst

Layered double hydroxide-modified polyoxometalate (ZnAl-PW) was prepared and used for the oxidative desulfurization of dibenzothiophene. XRD patterns of ZnAl-LDH and PW are still present in ZnAl-PW. The bands of ZnAl-PW in wavenumber 3276, 1637, 1363, 1050, 952, 887, and 667 cm-1. The typical surface of ZnAl-LDH and ZnAl-PW can be observed not smooth in different sized with irregular shapes. The average diameter distribution of ZnAl-LDH and ZnAl-PW is 14 nm and 47 nm, respectively. For dibenzothiophene with 500 ppm, conversion on ZnAl-LDH, PW, and ZnAl-PW was 94.71%, 95.88%, and 99.16%, respectively. Conversion of dibenzothiophene in line with the acidity of ZnAl-LDH, PW, and ZnAl-PW were 0.399, 1.635, and 3.023 mmol/gram, respectively. The most effective catalyst dosage for the desulfurization of dibenzothiophene on ZnAl-LDH, PW, and ZnAl-PW is 0.25 g. The unchanged dibenzothiophene concentration indicates a heterogeneous system. ZnAl-LDH, PW, and ZnAl-PW are truly heterogeneous catalysts. After 3 cycles of oxidative desulfurization, the percentage conversion of dibenzothiophene on ZnAl-LDH, PW, and ZnAl-PW were 77.42 %, 65.98%, and 86.38%, respectively. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

A novel nanocomposite (g-C3N4/Fe3O4@P2W15V3) with dual function in organic dyes degradation and cysteine sensing

Among the important needs of human societies is the elimination of environmental pollution and also the construction of high-performance and inexpensive biosensors. In this regard, the construction of multi-functional composites has been considered. A novel magnetic graphite carbon nitride decorated by tri-vanadium substituted Dawson-type heteropolytungstate nanocomposite (C₃N₄/Fe₃O₄@P₂W₁₅V₃) effectively synthesized and characterized by prevalent functional analysis. The prepared nano-catalyst presents bi-functional usage involving photocatalytic removal of dyes (methylene blue, congo red and phenyl red) (around 98%) under visible light radiation and greatly sensitive colorimetric sensing of cysteine in an aqueous media. Moreover, synthesized nano-catalyst successfully recovered five times without any considerable deficiency on its photocatalytic ability. Further, Moreover, we propose a novel method for cysteine detection based on the C₃N₄/Fe₃O₄@P₂W₁₅V₃ nanocomposite. This nanocomposite displayed a privileged catalytic feature for cysteine oxidation to extend a clock reaction of methylene blue as an indicator in the presence of NaBH₄ in acidic solution. More importantly, this colorimetric sensing method of cysteine presents an easy, low-cost, selective, and rapid colorimetric assay with a detection limit value of 7.2 μM in the acceptable linear range of 5-600 μM.

Sunlit expeditious visible light-mediated photo-fenton degradation of ciprofloxacin by exfoliation of NiCo2O4 and Zn0·3Fe2·7O4 over g-C3N4 matrix: A brief insight on degradation mechanism, degraded product toxicity, and genotoxic evaluation in Allium cepa

Pharmaceutical pollutant in the environmental water bodies has become a major concern, which causes adverse effect to aquatic entities. This study provides an incisive insight on the photocatalytic degradation of ciprofloxacin (CIP) and the development of rationally engineered g-C3N4-NiCo2O4-Zn0.3Fe2·7O4 nanocomposite for boosted photocatalytic performance under visible light irradiation. The g-C3N4-NiCo2O4-Zn0.3Fe2·7O4 nanocomposite was synthesized via ultrasonication-assisted hydrothermal method. The characterization of the as-prepared material was evaluated by XPS, SEM, HR-TEM, PL, FT-IR, EIS, ESR, XRD, BET, and UV-Vis DRS techniques. Furthermore, the effect of catalytic dosage, drug dosage, and pH changes was explored, where g-C3N4-NiCo2O4-Zn0.3Fe2·7O4-10% unveiled excellent visible light photo-Fenton degradation of 92% for CIP at 140 min. The hydroxyl radicals (OH.) served as the predominant radical species on the photodegradation of CIP, which was confirmed by performing a radical scavenging test. Furthermore, the degradation efficiency was determined by six consecutive cycle tests, where the nanomaterial exhibited excellent stability with 98.5% reusable efficiency. The degradation of CIP was further scrutinized by GC-MS analysis, where the degraded intermediate products and the possible pathway were elucidated. The degraded product toxicity was determined by ECOSAR program, where the degraded products haven't exhibited any considerable toxic effects. In addition, the genotoxicity of the nanomaterial was determined by treating them with root tips of A. cepa, where it was found to be non-toxic. Here, the prepared g-C3N4-NiCo2O4-Zn0.3Fe2·7O4 nanocomposite (CNZ NCs) shows eco-friendly and excellent photo-Fenton activity for environmental applications.

A Nickel-Containing Polyoxomolybdate as an Efficient Antibacterial Agent for Water Treatment

In view of the water pollution issues caused by pathogenic microorganisms and harmful organic contaminants, nontoxic, environmentally friendly, and efficient antimicrobial agents are urgently required. Herein, a nickel-based Keggin polyoxomolybdate [Ni(L)(HL)]₂H[PMo₁₂O₄₀] 4H₂O (1, HL = 2-acetylpyrazine thiosemicarbazone) was prepared via a facile hydrothermal method and successfully characterized. Compound 1 exhibited high stability in a wide range of pH values from 4 to 10. 1 demonstrated significant antibacterial activity, with minimum inhibitory concentration (MIC) values in the range of 0.0019–0.2400 µg/mL against four types of bacteria, including Staphylococcus aureus (S. aureus), Bacillus subtilis (B. subtilis), Escherichia coli (E. coli), and Agrobacterium tumefaciens (A. tumefaciens). Further time-kill studies indicated that 1 killed almost all (99.9%) of E. coli and S. aureus. Meanwhile, the possible antibacterial mechanism was explored, and the results indicate that the antibacterial properties of 1 originate from the synergistic effect between [Ni(L)(HL)]⁺ and [PMo₁₂O₄₀]³⁻. In addition, 1 presented effective adsorption of basic fuchsin (BF) dyes. The kinetic data fitted a pseudo-second-order kinetic model well, and the maximum adsorption efficiency for the BF dyes (29.81 mg/g) was determined by the data fit of the Freundlich isotherm model. The results show that BF adsorption was dominated by both chemical adsorption and multilayer adsorption. This work provides evidence that 1 has potential to effectively remove dyes and pathogenic bacteria from wastewater.

Novel preparation of stable and highly photocatalytic Z-scheme Cs3PW12O40/Ag3PO4 photocatalysts for the photocatalytic degradation of organic contaminants in water

The Cs₃PW₁₂O₄₀/Ag₃PO₄ (CsPW/Ag₃PO₄) heterojunction photocatalyst in this study was prepared using a simple chemical precipitation method. Spherical CsPW particles were successfully deposited on Ag₃PO₄ nanocrystals, all the as-prepared samples are characterized by X-ray diffraction pattern (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), UV visible spectroscopy (UV-Vis), and X-ray photoelectron spectroscopy (XPS). The catalyst activity in relation to rhodamine B (RhB) degradation was evaluated under visible light (λ > 420 nm). The CsPW/Ag₃PO₄ heterojunction photocatalyst can effectively degrade RhB. The Z-scheme 3% CsPW/Ag₃PO₄ heterojunction photocatalyst has a higher photocatalytic ability compared with the single-component photocatalyst CsPW or Ag₃PO₄. The comparatively high photocatalytic performance can be attributed to the high matching of the energy band position and close interface contact, suggesting an enhanced separation efficiency of the photoinduced carriers of the CsPW/Ag₃PO₄ heterojunction photocatalyst. The reactive species trapping experiments demonstrated photogenerated holes (h⁺) and superoxide radicals (•O₂^-) to be the main active components of photocatalytic degradation. A possible photocatalytic mechanism is subsequently proposed.

Construction and application of BiOCl/Cu-doped Bi2S3 composites for highly efficient photocatalytic degradation of ciprofloxacin

In this work, a novel BiOCl/Cu-doped Bi₂S₃ photocatalyst was designed to efficiently remove ciprofloxacin (CIP) with high photocatalytical activity and good stability over a wide pH range. Compared with Cu-doped Bi₂S₃, Bi₂S₃, BiOCl, BiOCl/Bi₂S₃, and Cu-doped BiOCl, the photocatalytical degradation rate of CIP (97.1% at 20 mg/L) over BiOCl/Cu-doped Bi₂S₃ was enhanced by about 84.77, 44.23, 2.95, 2.27, and 1.96 times within 20 min, respectively. Notably, the BiOCl/Cu-doped Bi₂S₃ photocatalyst also displayed high photocatalytical performance in the degradation of other antibiotics including norfloxacin, ofloxacin, and tetracycline (40 mL, 20 mg/L; 88.3%, 100%, and 95.2% of degradation rate within 30 min, respectively) under visible light irradiation. Radical trapping experiments and electron spin resonance technique indicated that superoxide radicals (•O₂^-) and photogenerated holes (h⁺) played crucial roles in the photocatalytic degradation of CIP. Finally, the possible CIP degradation pathways was proposed by detecting the CIP intermediates in photocatalytical reaction process.

Application of polyoxometalates in photocatalytic degradation of organic pollutants

Organic pollutants are highly toxic, accumulative, and difficult to degrade or eliminate. As a low-cost, high-efficiency and energy-saving environmental purification technology, photocatalytic technology has shown great advantages in solving increasingly serious environmental pollution problems. The development of efficient and durable photocatalysts for the degradation of organic pollutants is the key to the extensive application of photocatalysis technology. Polyoxometalates (POMs) are a kind of discrete metal-oxide clusters with unique photo/electric properties which have shown promising applications in photocatalytic degradation. This review summarizes the recent advances in the design and synthesis of POM-based photocatalysts, as well as their application in the degradation of organic dyes, pesticides and other pollutants. In-depth perspective views are also proposed in this review.