Cupressus macrocarpa leaves for biomonitoring the environmental impact of an industrial complex: The case of Puchuncaví-Ventanas in Chile

Effect of the Proximity to the Quintero-Puchuncaví Industrial Zone on Compounds Isolated from Baccharis macraei Hook. & Arn: Their Antioxidant and Cytotoxic Activity

Baccharis macraei Hook. & Arn (Asteraceae), commonly known as Vautro, is found in the coastal areas of central-southern Chile, including the industrial zone of Quintero-Puchuncaví, known for the contamination of its soils with heavy metals, which together with other factors generate abiotic stress in plant species, against which they present defensive mechanisms. For this reason, the objective was to evaluate the effect of abiotic stress generated by the proximity of B. macraei to the industrial complex by assessing the physiological and metabolic states reported by the extracts and compounds isolated from the species, as well as the photosynthetic capacity, metal content and production, and antioxidant activity and cytotoxicity against tumorigenic cell lines of the phytoconstituents. To this end, B. macraei was collected at two different distances from the industrial complex, observing that the closer the species is, the greater the concentration of copper in the soil, generating a decrease in the rate of electron transport in situ, but an increase in antioxidant activity with low cytotoxicity. This activity could be due to the presence of flavonoids such as Hispidulin, Cirsimaritina, and Isokaempferida, as well as monoterpenes, oxygenated and non-oxygenated sesquiterpenes identified in this study.

Reconstruction of a century of air pollution history in Nanjing, China, using trace elements in situ leaf specimens of Platanus × hispanica and Pittosporum tobira

Leaves can specifically uptake trace elements from the surrounding environment. And tree leaves are a good biological indicator for air pollution. Therefore, chemical analysis of leaf specifications can be used to reproduce a historical record of air pollution. To better understand the history of urban air pollution from the 1920s to the 2020s in Nanjing, China, leaf samples of two woody plants, Platanus × hispanica and Pittosporum tobira, were collected in this study as environmental indicators from different historical periods. These included historical herbarium specimens and current leaves from live trees. The concentrations of 10 trace elements were determined in the samples using ICP‒MS. Pollution indices were calculated, yielding the key findings. The historical leaf samples showed continuously increasing mean concentrations of the 10 trace elements over time, which significantly correlating with automobile quantities and the number of large-scale industrial enterprises (p < 0.05). Moreover, modern leaf trace element concentrations were significantly correlated with PM10, PM2.5, automobiles, large-scale industrial enterprises, and atmospheric factors, confirming these as sources. In addition to the historical growth trend, spatial heterogeneity was revealed in historical Platanus × hispanica leaf samples from the 14 sites in Nanjing. Changes in heavy metal trace element pollution distributions were consistent with transportation and industrial expansion, with homologous patterns across elements. Specifically, post 1980s increases were observed in the representative NJ2 (Zhongshan Botanical Garden) and the NJ5(Nanjing University) sites, with higher concentrations occurring at in the NJ5 contaminated site than at the NJ2 uncontaminated site. After 2009, the 10 element (except Cd) pollution indices in Platanus × hispanica leaves fluctuated but declined overall. This reconstruction of Nanjing's air pollution history demonstrates that ample environmental information can be extracted from plant leaf markers over time and space.

An appraisal of the principal concerns and controlling factors for Arsenic contamination in Chile

Although geogenic Arsenic (As) contamination is well-recognized in northern Chile, it is not restricted to this part of the country, as the geological conditions favoring As release to the human environment exist across the country as well, although not at the same level, based on comparatively fewer studies in central and southern Chile. The present work provides a critical evaluation of As sources, pathways, and controls with reports and case studies from across the country based on an exhaustive bibliographic review of its reported geogenic sources and processes that affect its occurrence, systematization, and critical revision of this information. Arc magmatism and associated geothermal activities, identified as the primary As sources, are present across the Chilean Andes, except for the Pampean Flat Slab and Patagonian Volcanic Gap. Metal sulfide ore zones, extending from the country's far north to the south-central part, are the second most important geogenic As source. While natural leaching of As-rich mineral deposits contaminates the water in contact, associated mining, and metallurgical activities result in additional As release into the human environment through mining waste and tailings. Moreover, crustal thickness has been suggested as a principal controlling factor for As release, whose southward decrease has been correlated with lower As values.

Impacts of atmospheric copper and cadmium deposition on the metal accumulation of camphor leaves and rings around a large smelter

The atmospheric deposition of copper (Cu) and cadmium (Cd) was monitored in eight sites around a Cu smelter with similar distance to verify whether tree leaf and ring can be used as bio-indicators to track spatial pollution record. Results showed that total atmospheric deposition of Cu (103-1215 mg/m²/year) and Cd (3.57-11.2 mg/m²/year) were 4.73-66.6 and 3.15-12.2 times higher than those in background site (164 mg/m²/year and 0.93 mg/m²/year). The frequencies of wind directions significantly influenced the atmospheric deposition of Cu and Cd, and the highest atmospheric deposition of Cu and Cd were at the prevalent northeastern wind (JN), and low frequency south (WJ) and north (SW) winds for the lowest deposition fluxes. Since the bioavailability of Cd was higher than that of Cu, the atmospheric deposition of Cd was more easily adsorbed by tree leaf and ring, resulting in only significant relation between atmospheric Cd deposition and Cinnamomum camphora leaves and tree ring Cd. Although tree rings cannot correctly record the atmospheric Cu and Cd deposition, higher concentrations in the indigenous tree rings than the transplanted tree rings suggested that tree rings can reflect to some extent the variations of atmospheric deposition. Generally, spatial pollution of atmospheric deposition of heavy metals cannot reflect the distribution of soil total and available metals around the smelter, and only camphor leaf and tree ring can bio-indicate Cd deposition. A major implication of these findings is that leaf and tree ring can serve for biomonitoring purposes to assess the spatial distribution of atmospheric deposition metal with high bioavailability around a pollution source with similar distance.

A new methodology for source apportionment of gaseous industrial emissions

Air quality modeling (AQM) is often used to investigate gaseous pollution around industrial zones. However, this methodology requires accurate emission inventories, unbiased AQM algorithms and realistic boundary conditions. We introduce a new methodology for source apportionment of industrial gaseous emissions, which is based on a fuzzy clustering of ambient concentrations, along with a standard AQM approach. First, by applying fuzzy clustering, ambient concentration is expressed as a sum of non-negative contributions - each corresponding to a specific spatiotemporal pattern (STP); we denote this method as FUSTA (FUzzy SpatioTemporal Apportionment). Second, AQM of the major industrial emissions in the study zone generates another set of STP. By comparing both STP sets, all major source contributions resolved by FUSTA are identified, so a source apportionment is achieved. The uncertainty in FUSTA results may be estimated by comparing results for different numbers of clusters. We have applied FUSTA in an industrial zone in central Chile, obtaining the contributions from major sources of ambient SO₂: a thermal power plant complex and a copper smelter, and other contributions from local and regional sources (outside the AQM domain). The methodology also identifies SO₂ episodes associated to emissions from the copper smelter.

Bioremoval of copper by filamentous fungi isolated from contaminated soils of Puchuncaví-Ventanas Central Chile

Pollution represents a high risk to plants, animals, and human beings, causing an imbalance and affecting the environment. Soil is considered a universal sink, containing the highest load of environmental pollution. Puchuncaví-Ventanas sector, decreed as a saturated contamination zone in 1993, is considered one of the most affected areas by industrial pollution and belongs to one of the 5 sacrifice zones of Chile. The localities of Puchuncaví and Ventanas have heavy metal pollution levels that exceed up to 99% of the limits allowed by Canadian standards. The objective of this study was to characterize heavy metal tolerance and removal potential of filamentous fungi isolated from polluted soils for their use in decontamination systems and in situ soil improvement. Six fungal strains were selected based on their tolerance and a high capability to accumulate heavy metals, achieving copper bioaccumulation of 84% (Mortierella sp. strain LG01), 49% (Clonostachys sp. strain CQ23) and 48-77.5% (Trichoderma sp. strain LM01A). Trichoderma sp. strain LM01A was able to remove 41% of copper from contaminated soil under ex situ conditions. Some fungal strains belong to beneficial fungal genera, which are used as bioproducts in agriculture. The results of this study highlighted the use of Trichoderma sp. in soils contaminated, which may be of special interest in agriculture due to the large amounts of copper sulfate still applied as a pesticide in Chile and the world.

Heavy metal concentrations in floodplain soils of the Innerste River and in leaves of wild blackberries (Rubus fruticosus L. agg.) growing within and outside the floodplain: the legacy of historical mining activities in the Harz Mountains (Germany)

We studied heavy metal levels in floodplain soils of the Innerste River in northern Germany and in the leaves of wild blackberries (Rubus fruticosus L. agg.) growing within and in adjacent areas outside the river floodplain. Heavy metal contamination of the Innerste floodplain is a legacy of historical metal ore mining, processing, and smelting in the Harz Mountains. The heavy metal (Cd, Pb, Zn, Cu, Ni, and Cr) contents of previously studied soil samples from eleven floodplain sites along the Innerste River were re-analyzed statistically, and the levels of these metals in blackberry leaves were determined at five sites. Mean concentrations in the floodplain soils were elevated by factors of 4.59 to 28.5 for Cd, 13.03 to 158.21 for Pb, 5.66 to 45.83 for Zn, and 1.1-14.81 for Cu relative to the precautionary limits for soils stipulated by the German Federal Soil Protection and Contaminated Sites Ordinance. Cadmium, Pb, Zn, Cu, and Ni levels in floodplain soils decreased markedly downstream, as did the concentrations of Cd, Zn, and Ni in the leaves of blackberries from within the floodplain. Levels of Cd, Pb, and Zn in leaves of blackberries from within the floodplain significantly exceeded those of specimens from outside the floodplain. The findings of our study highlight the potential of wild blackberry as a biomonitor of soil pollution by Cd, Pb, and Zn and corroborate the massive heavy metal contamination of floodplain soils along the Innerste River observed in previous studies.

Bioavailability and toxicity of bromine and neodymium for plants grown in soil and water

Information about biological significance and possible phytotoxicity of many trace elements is still scarce. Bromine and neodymium are among the poorly investigated trace elements. In the research, greenhouse experiment was conducted to study the effects of bromide of neodymium on wheat seedlings grown in soil and water. The wheat seedlings were capable of accumulating large amounts of both Br and Nd. Compared to the soil-grown plants, the water-grown plants accumulated higher concentrations of the trace elements. The bioaccumulation of Br and Nd resulted in statistically significant variations in the concentrations of several elements. The concentrations of P, Cl, and Ca in roots and Cl in leaves of the plants grown in the contaminated water and the concentration of I in roots of the soil-grown plants decreased. In the water-grown seedlings, the concentrations of Na and P were higher and concentrations of Mg and K were lower than those in the seedlings grown in soil. In leaves of the plants grown in water, the concentration of Cl was lower than that in leaves of the soil-grown plants. In roots of the water-grown plants, the concentration of Zn was higher, and in leaves, it was lower compared with Zn content in roots and leaves of the plants grown in soil. The K/Na ratios were 4 (leaves) and 20 (roots) times higher in the soil-grown plants, while the Ca/Mg ratios were 8 - 19 times higher in the water-grown plants. Marked distinctions were also observed in relationships between different elements in the soil-grown and water-grown plants.

Trace Element Levels in Native Plant Species around the Industrial Site of Puchuncaví-Ventanas (Central Chile): Evaluation of the Phytoremediation Potential

The present work investigates the uptake of selected trace elements (Cu, Sb, As, Pb, Cd, Zn, Cr, Mn, Ni, V, and Co) from soil and their accumulation in the biomass samples (leaves and flowers) of three selected native plants (namely Oenothera picensis, OP; Sphaeralcea velutina, SV; and Argemone subfusiformis, AS) around an industrial area (Puchuncaví-Ventanas) located in the Puchuncaví valley, in the central region of Chile. Primary emission sources in the area come from a copper refinery, coal-fired power plants, and a set of 14 other different industrial facilities. Trace element measurements in the native plants of this area and the ability to transfer of these pollutants from soil to plants (transfer factor) have been assessed in order to identify the potential use of these plant species for phytoremediation. Preliminary results showed a high concentration of trace elements in the OP, SV, and AS samples. The concentration of these elements in the plants was found to be inversely correlated to the distance of the primary emission sources. Moreover, the high concentrations of trace elements such as Cu, As, Cr and V, upon the toxic limits in the native plant species, suggest the need for continuous monitoring of the region. The OP species was identified as the plant with the highest capacity for trace elements accumulation, which also showed higher accumulation potential in whole aerial parts than in leaves. Transfer factor values suggested that these native plants had phytoremediation potential for the elements Cu, Pb, As, Ni, and Cr. This study provides preliminary baseline information on the trace element compositions of important native plants and soil in the Puchuncaví-Ventanas area for phytoremediation purposes.

Key Points in Air Pollution Meteorology

Although emissions have a direct impact on air pollution, meteorological processes may influence inmission concentration, with the only way to control air pollution being through the rates emitted. This paper presents the close relationship between air pollution and meteorology following the scales of atmospheric motion. In macroscale, this review focuses on the synoptic pattern, since certain weather types are related to pollution episodes, with the determination of these weather types being the key point of these studies. The contrasting contribution of cold fronts is also presented, whilst mathematical models are seen to increase the analysis possibilities of pollution transport. In mesoscale, land-sea and mountain-valley breezes may reinforce certain pollution episodes, and recirculation processes are sometimes favoured by orographic features. The urban heat island is also considered, since the formation of mesovortices determines the entry of pollutants into the city. At the microscale, the influence of the boundary layer height and its evolution are evaluated; in particular, the contribution of the low-level jet to pollutant transport and dispersion. Local meteorological variables have a major influence on calculations with the Gaussian plume model, whilst some eddies are features exclusive to urban environments. Finally, the impact of air pollution on meteorology is briefly commented on.