On-line spectroscopic study of brominated flame retardant extraction in supercritical CO2

One electron oxidation-induced degradation of brominated flame retardants in electroactive membrane filtration system: Vital role of dichlorine radical-mediated process

Reactive chlorine species (RCS) are inevitably generated in electrochemical oxidation process for treating high-salinity industrial wastewater, thereby resulting in the competition with coexisting hydroxyl radicals (•OH) for oxidizing recalcitrant organic compounds. Due to the low redox potentials compared to •OH, the role of RCS has been often overlooked. In this work, we developed an electroactive membrane filtration (EMF) system that had a high removal efficiency (99.1 ± 0.5 %) for tetrabromobisphenol S (TBBPS) at low energy consumption (1.45 kWh m-3). Electron spin resonance spectroscopy and molecular probing tests indicated the predominance of Cl2•-, of which steady-state concentration (2.2 ×10-10 M) was extremely higher than those of ClO• (6.7 ×10-13 M), •OH (0.95 ×10-13 M), and Cl• (2.39 ×10-15 M). The density functional theory (DFT) and intermediate product analysis highlighted that Cl2•- radicals had a higher electrophilic attack efficacy than •OH radicals for inducing changes in the electron density of the carbon atoms around phenolic hydroxyl groups, thus leading to the generation of transition state intermediates and accelerating the degradation of TBBPS. Our work demonstrates the vital role of Cl2•- radicals for pollutant degradation, highlighting the potential of this technology for cost-effective removal of recalcitrant organic compounds from water and wastewater.

Identification of hazardous organic compounds in e-waste plastic using non-target and suspect screening approaches

End-of-life electric and electronic devices stand as one of the fastest growing wastes in the world and, therefore, a rapidly escalating global concern. A relevant fraction of these wastes corresponds to polymeric materials containing a plethora of chemical additives. Some of those additives fall within the category of hazardous organic compounds (HOCs). Despite the significant advances in the capabilities of analytical methods, the comprehensive characterization of WEEE plastic remains as a challenge. This research strives to identify the primary additives within WEEE polymers by implementing a non-target and suspect screening approach. Gas chromatography coupled to time-of-flight mass spectrometry (GC-QTOF-MS), using electron ionization (EI), was applied for the detection and identification of more than 300 substances in this matrix. A preliminary comparison was carried out with nominal resolution EI-MS spectra contained in the NIST17 library. BPA, flame retardants, UV-filters, PAHs, and preservatives were among the compounds detected. Fifty-one out of 300 compounds were confirmed by comparison with authentic standards. The study establishes a comprehensive database containing m/z ratios and accurate mass spectra of characteristic compounds, encompassing HOCs. Semi-quantification of the predominant additives was conducted across 48 WEEE samples collected from handling and dismantling facilities in Galicia. ABS plastic demonstrated the highest median concentrations, ranging from 0.154 to 4456 μg g-1, being brominated flame retardants and UV filters, the families presenting the highest concentrations. Internet router devices revealed the highest concentrations, containing a myriad of HOCs, such as tetrabromobisphenol A (TBBPA), tribromophenol (TBrP), triphenylphosphate (TPhP), tinuvin P and bisphenol A (BPA), most of which are restricted in Europe.

Activated recovery of PVC from contaminated waste extension cord-cable using a weak acid

Waste electronic and electrical equipment are complex mixtures of valuable and/or toxic materials, which pose serious challenges in their recycling or disposal, for example, electrical transmission wires insulated in polyvinyl chloride materials. These materials are frequently found contaminated with toxic chemical elements, such as Pb, Hg, Cr, or Cd, and are discarded without decontamination. To resolve this problem, we developed a microwave-assisted extraction process to remove toxic metals from plastic e-waste. We processed diluted (30 wt%) citric acid at 210 °C for 1 h inside a pressurized vessel heated by microwave, and found it was suitable not only for the extraction of the toxic metals (∼100%) but also for a significant plastic recovery (>50 wt%). To predict an optimized process window, the support vector regression machine learning algorithm was applied, which reduced the amount of experimentation required while still giving accurate results. Conditions optimized for the reference sample also led to maximum extraction of toxic metals from real-life extension cord waste. We also report that the recovered plastic's properties remained intact after the extraction.

Machine learning-assisted optimization of TBBPA-bis-(2,3-dibromopropyl ether) extraction process from ABS polymer

The increasing amount of e-waste plastics needs to be disposed of properly, and removing the brominated flame retardants contained in them can effectively reduce their negative impact on the environment. In the present work, TBBPA-bis-(2,3-dibromopropyl ether) (TBBPA-DBP), a novel brominated flame retardant, was extracted by ultrasonic-assisted solvothermal extraction process. Response Surface Methodology (RSM) achieved by machine learning (support vector regression, SVR) was employed to estimate the optimum extraction conditions (extraction time, extraction temperature, liquid to solid ratio) in methanol or ethanol solvent. The predicted optimum conditions of TBBPA-DBP were 96 min, 131 mL g^-1, 65 °C, in MeOH, and 120 min, 152 mL g^-1, 67 °C in EtOH. And the validity of predicted conditions was verified.

Brominated flame retardants extraction from waste electrical and electronic equipment-derived ABS using supercritical carbon dioxide

Persistent organic pollutants such as brominated flame retardants represent a major problem in the end-of-life of polymer materials. This study investigates the extraction of brominated flame retardants (BFR) from real waste electrical and electronic equipment (WEEE) using supercritical carbon dioxide (sc-CO₂). Sc-CO₂ is a non-toxic solvent which possesses intermediate properties between liquids and gases which confer it high diffusivity and solubility. A batch of WEEE-derived acrylonitrile-butadienestyrene (ABS) was first characterized to determine its bromine and BFR composition which was found to be four times higher than the regulation limit set in 2019. Then, different parameters of the sc-CO₂ process such as temperature, pressure, granulometry and the use of a co-solvent were studied to estimate the effect of each one on the BFR extraction efficiency. With the view to determine the recyclability of the treated polymer, the impact of the extraction process on the polymer material was also studied by Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC) and Size Exclusion Chromatography (SEC). The extraction process performed on <500 µm particle size sample at 40 °C and 500 bars during 6 h and using ethanol as a co-solvent allowed to remove 43.5 ± 0.9% of bromine, which was the maximum extraction rate obtained. Sc-CO₂ extraction was found to be an efficient technique to remove tetrabromobisphenol A (TBBPA) but the tested conditions did not allow to remove enough polybromodiphenylethers (PBDE) to satisfy the regulation. Sc-CO₂ process seems to be a promising pre-treatment method prior to mechanical recycling as no degradation effect on the polymer matrix was observed.