Effect of nano cerium oxide on soybean (Glycine max L. Merrill) crop exposed to environmentally relevant concentrations

Evaluation of the effect of nanoparticles on the cultivation of edible plants by ICP-MS: a review

Nanoparticle (NP) applications aiming to boost plant biomass production and enhance the nutritional quality of crops hae proven to be a valuable ally in enhancing agricultural output. They contribute to greater food accessibility for a growing and vulnerable population. These nanoscale particles are commonly used in agriculture as fertilizers, pesticides, plant growth promoters, seed treatments, opportune plant disease detection, monitoring soil and water quality, identification and detection of toxic agrochemicals, and soil and water remediation. In addition to the countless NP applications in food and agriculture, it is possible to highlight many others, such as medicine and electronics. However, it is crucial to emphasize the imperative need for thorough NP characterization beyond these applications. Therefore, analytical methods are proposed to determine NPs' physicochemical properties, such as composition, crystal structure, size, shape, surface charge, morphology, and specific surface area, detaching the inductively coupled plasma mass spectrometry (ICP-MS) that allows the reliable elemental composition quantification mainly in metallic NPs. As a result, this review highlights studies involving NPs in agriculture and their consequential effects on plants, with a specific focus on analyses conducted through ICP-MS. Given the numerous applications of NPs in this field, it is essential to address their presence and increase in the environment and humans since biomagnification and biotransformation effects are studies that should be further developed. In light of this, the demand for rapid, innovative, and sensitive analytical methods for the characterization of NPs remains paramount.

Evidence of parental transfer of nanoplastics in pea (Pisum sativum) plants

The increasing abundance of nanoplastics in the environment is a cause of serious concern and its acute and chronic effects on ecosystems need to be thoroughly investigated. Toward this end, this study investigated the parental transfer of nanoplastics by chronically exposing Pisum sativum (pea) plants to nanoplastics through soil medium. We observed the presence of nanoplastics in harvested fruits and a subsequent generation of plants replanted in uncontaminated soil using confocal laser scanning microscopy. The fluorescence was located in the cell wall of the vascular bundles, but not in the epidermis, indicating the parental transfer of nanoplastics. In addition, we determined the effects of nanoplastics on the health of subsequent plant generations by estimating the reproductive factors and measuring the content of individual nutrients in peas. Decreases in crop yield and fruit biomass, in addition to changes in nutrient content and composition, were noted. The transgenerational effects of nanoplastics on plants can profoundly impact terrestrial ecosystems, including both plant species and their predators, raising critical safety concerns. Our findings highlight the evidence of parental transfer of nanoplastics in the soil through plants and shows that the chronic effects of nanoplastics on plants may pose a threat to the food supply.

Boosting plant resilience: The promise of rare earth nanomaterials in growth, physiology, and stress mitigation

Rare earth elements (REE) have been extensively used in a variety of applications such as cell phones, electric vehicles, and lasers. REEs are also used as nanomaterials (NMs), which have distinctive features that make them suitable candidates for biomedical applications. In this review, we have highlighted the role of rare earth element nanomaterials (REE-NMs) in the growth of plants and physiology, including seed sprouting rate, shoot biomass, root biomass, and photosynthetic parameters. In addition, we discuss the role of REE-NMs in the biochemical and molecular responses of plants. Crucially, REE-NMs influence the primary metabolites of plants, namely sugars, amino acids, lipids, vitamins, enzymes, polyols, sorbitol, and mannitol, and secondary metabolites, like terpenoids, alkaloids, phenolics, and sulfur-containing compounds. Despite their protective effects, elevated concentrations of NMs are reported to induce toxicity and affect plant growth when compared with lower concentrations, and they not only induce toxicity in plants but also affect soil microbes, aquatic organisms, and humans via the food chain. Overall, we are still at an early stage of understanding the role of REE in plant physiology and growth, and it is essential to examine the interaction of nanoparticles with plant metabolites and their impact on the expression of plant genes and signaling networks.

Evaluation of nanoceria on cadmium uptake in Triticum aestivum (L.) and its implications for dietary health risk

In recent times, significant attention has been directed toward the synthesis and application of nanoparticles (NPs) in agriculture sector. In current study, nanoceria (CeO2 NPs) synthesized by green method were employed to address cadmium (Cd) accumulation in wheat (Triticum aestivum L.) cultivated in field with excess Cd. The application of CeO2 NPs was carried out through foliar spraying, performed twice during the growth of T. aestivum. Four levels of CeO2 NPs were used: T0, T1, T2, and T3 as 0, 50, 75, and 100 mgL-1, respectively. Results highlighted the positive effects of CeO2 NPs on various growth parameters, including plant height, spike length, photosynthetic related attributes, as well as straw and grain of grains in comparison to T1 (control group). Furthermore, CeO2 NPs led to a reduction in oxidative stress in the leaves and enhanced in enzyme activities in comparison to T1. Notably, Cd concentrations in straw, roots, and grains exhibited a decline following the treatment with CeO2 NPs, in contrast to the control group. In terms of health implications, the calculated health risk index associated with dietary consumption of grains by adults remained below the defined threshold with supply of nanoparticles. Foliar application of CeO2 NPs proved to be an effective approach in reducing cadmium content in wheat grains. This reduction holds significant potential for minimizing the risk of cadmium exposure to human health through the food chain. Employing the green synthesis method amplifies the potential for extensive production and a wide array of environmental applications for CeO2 NPs. This dual capacity makes them proficient in tackling environmental stresses while concurrently mitigating adverse ecological effects.

Effect of green synthesized cerium oxide nanoparticles on fungal disease of wheat plants: A field study

Recently, there has been considerable attention towards the production of environmentally friendly nanoparticles (NPs). In this investigation, the successful synthesis of cerium oxide nanoparticles (CeO2 NPs) was achieved by employing an eco-friendly technique that utilized an extract from the leaves of local plant quinoa (Chenopodium quinoa L.). The synthesized CeO2 NPs were subjected to characterization using state-of-the-art methods. The prepared CeO2 NPs contained a round shape with clusters and have a size of 7-10 nm. To assess how effective CeO2 NPs derived from C. quinoa were against Ustilago tritici, a fungal disease that negatively affects wheat crop globally, a study was performed on two varieties of wheat crop comprised of Arooj (V1) and Akber (V2), cultivated under field conditions. CeO2 NPs were applied foliarly twice to the wheat crop at four different concentrations: T0 (0 mg/L), T1 (50 mg/L), T2 (75 mg/L), and T3 (100 mg/L). The results revealed that the control group (T0) exhibited the highest disease severity index (DSI) with a value of 75% compared to the other concentrations of CeO2 NPs on both varieties. At a concentration of 100 mg/L of CeO2 NPs, the DSI dropped to a minimum of 35% and 37% on both V1 and V2 respectively. These findings indicated that an increase in the concentration of CeO2 NPs has a beneficial impact on disease severity. Similar patterns have also been observed with disease incidence (DI), with the greatest efficacy observed at a concentration of 100 mg/L of CeO2 NPs. Our investigation has shown that CeO2 NPs exhibitd significant antifungal potential against U. tritici which may be a promising strategy to mitigate fungal disease and crop losses globally.

Nanomaterials biotransformation: In planta mechanisms of action

Research on engineered nanomaterials (ENMs) exposure has continued to expand rapidly, with a focus on uncovering the underlying mechanisms. The EU largely limits the number and the type of organisms that can be used for experimental testing through the 3R normative. There are different routes through which ENMs can enter the soil-plant system: this includes the agricultural application of sewage sludges, and the distribution of nano-enabled agrochemicals. However, a thorough understanding of the physiological and molecular implications of ENMs dispersion and chronic low-dose exposure remains elusive, thus requiring new evidence and a more mechanistic overview of pathways and major effectors involved in plants. Plants can offer a reliable alternative to conventional model systems to elucidate the concept of ENM biotransformation within tissues and organs, as a crucial step in understanding the mechanisms of ENM-organism interaction. To facilitate the understanding of the physico-chemical forms involved in plant response, synchrotron-based techniques have added new potential perspectives in studying the interactions between ENMs and biota. These techniques are providing new insights on the interactions between ENMs and biomolecules. The present review discusses the principal outcomes for ENMs after intake by plants, including possible routes of biotransformation which make their final fate less uncertain, and therefore require further investigation.

Mechanisms of cerium-induced stress in plants: A meta-analysis

A comprehensive evaluation of the effects of cerium on plants is lacking even though cerium is extensively applied to the environment. Here, the effects of cerium on plants were meta-analyzed using a newly developed database consisting of approximately 8500 entries of published data. Cerium affects plants by acting as oxidative stressor causing hormesis, with positive effects at low concentrations and adverse effects at high doses. Production of reactive oxygen species and its linked induction of antioxidant enzymes (e.g. catalase and superoxide dismutase) and non-enzymatic antioxidants (e.g. glutathione) are major mechanisms driving plant response mechanisms. Cerium also affects redox signaling, as indicated by altered GSH/GSSG redox pair, and electrolyte leakage, Ca²⁺, K⁺, and K⁺/Na⁺, indicating an important role of K⁺ and Na⁺ homeostasis in cerium-induced stress and altered mineral (ion) balance. The responses of the plants to cerium are further extended to photosynthesis rate (A), stomatal conductance (g_s), photosynthetic efficiency of PSII, electron transport rate, and quantum yield of PSII. However, photosynthesis response is regulated not only by physiological controls (e.g. g_s), but also by biochemical controls, such as via changed Hill reaction and RuBisCO carboxylation. Cerium concentrations <0.1-25 mg L^-1 commonly enhance chlorophyll a and b, g_s, A, and plant biomass, whereas concentrations >50 mg L^-1 suppress such fitness-critical traits at trait-specific concentrations. There was no evidence that cerium enhances yields. Observations were lacking for yield response to low concentrations of cerium, whereas concentrations >50 mg Kg^-1 suppress yields, in line with the response of chlorophyll a and b. Cerium affects the uptake and tissue concentrations of several micro- and macro-nutrients, including heavy metals. This study enlightens the understanding of some mechanisms underlying plant responses to cerium and provides critical information that can pave the way to reducing the cerium load in the environment and its associated ecological and human health risks.

X-ray fluorescence spectrometry for environmental analysis: Basic principles, instrumentation, applications and recent trends

In recent years, the conceptual advancement on green analytical chemistry (GAC) has moved in parallel with efforts to incorporate new screening or quantitative low-cost analytical tools to solve analytical problems. In this sense, the role of solid state techniques that allow the non-invasive analysis (or with a minimum sample treatment) of solid samples cannot be neglected. This review describes the basic principles, instrumentation and advances in the application of X-ray fluorescence instrumentation to the environmental sciences research topics, published between 2006 and 2020. Obviously, and because of the enormous number of works that can be found in the literature, it is not possible to exhaustively cover all published articles and the diversity of topics related to the environment in which a solid state technique like XRF has been applied successfully. It is a question of making a compilation of the instrumentation in use, the significant advances in XRF spectrometry and sample treatment strategies to highlight the potential of its implementation for environmental assessment.

Physiochemical responses of earthworms (Eisenia fetida) under exposure to lanthanum and cerium alone or in combination in artificial and contaminated soils

Rare earth elements inevitably release into the soil due to their widespread application. However, it is unclear how they affect the soil animals. The study surveyed the growth and physiological responses of earthworm (Eisenia fetida) exposed into artificial soils spiked with La, Ce, and their mixture, and actual mine soil collected from an abandoned La-Ce mining area (Mianning, Sichuan). The results showed that the 1000-1200 mg/kg combined exposure in two soils induced significant histopathological and phenotypic changes of earthworms. Concentration significantly affected the superoxide dismutase (SOD), peroxidase (POD), malondialdehyde (MDA), and protein of E. fetida and the effects differentiated with the prolonging duration. These indicators were negatively affected under the La stress ≥800 mg/kg (SOD, POD, and protein), the 1200 mg/kg (SOD), Ce stress ≥1000 mg/kg (protein), and the combination ≥800 mg/kg (SOD, POD) and ≥1000 mg/kg (protein). Artificial combination had -15.04% (SOD), 8.87% (POD), 5.64% (MDA), and -8.34% (protein) difference compared with the contamination soil, respectively. Overall, E. fetida respond sensitively under the La and Ce stress, the antioxidant defense system and the lipid peroxidation were stimulated, and the artificial soil might overestimate eco-toxicological effect.

Indigenous functional microbial communities for the preferential degradation of chloroacetamide herbicide S-enantiomers in soil

This study investigated indigenous functional microbial communities associated with the degradation of chloroacetamide herbicides acetochlor (ACE), S-metolachlor (S-MET) and their enantiomers in repeatedly treated soils. The results showed that biodegradation was the main process for the degradation of ACE, S-MET and their enantiomers. Eight dominant bacterial genera associated with the degradation were found: Amycolatopsis, Saccharomonospora, Mycoplasma, Myroides, Mycobacterium, Burkholderia, Afipia, and Kribbella. The S-enantiomers of ACE and S-MET were preferentially degraded, which mainly relied on Amycolatopsis, Saccharomonospora and Kribbella for the ACE S-enantiomer and Amycolatopsis and Saccharomonospora for the S-MET S-enantiomer. Importantly, the relative abundances of Amycolatopsis and Saccharomonospora increased by 146.3%-4467.2% in the S-enantiomer treatments of ACE and S-MET compared with the control, which were significantly higher than that in the corresponding R-enantiomer treatments (25.3%-4168.2%). Both metagenomic and qPCR analyses demonstrated that four genes, ppah, alkb, benA, and p450, were the dominant biodegradation genes (BDGs) potentially involved in the preferential degradation of the S-enantiomers of ACE and S-MET. Furthermore, network analysis suggested that Amycolatopsis, Saccharomonospora, Mycoplasma, Myroides, and Mycobacterium were the potential hosts of these four BDGs. Our findings indicated that Amycolatopsis and Saccharomonospora might play pivotal roles in the preferential degradation of the S-enantiomers of ACE and S-MET.

Green Synthesis of Nanostructure CeO2 Using Tea Extract: Characterization and Adsorption of Dye from Aqueous Phase

Nanostructure CeO₂ powders were synthesized using tea waste extract as gel precursor. The as-prepared samples were characterized by thermogravimetric analyzer (TGA), X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. Based on the TGA/DTG analysis, the intermediates of cerium chloride hydrates (CeCl₃.4H₂O and CeCl₃.H₂O) and cerium anhydrous (CeCl₃) were produced, and the formation temperature of CeO₂ was estimated to be 773 K. The cubic fluorite structure of CeO₂ was detected to be the predominant species and was completely formed at the calcination temperature of 773K–1073 K with a crystal size between 8.8 and 11.4 nm based on the XRD measurement. Moreover, the main chemical state of ceria on the surface of the synthesized samples was confirmed to be tetravalent ceria by XPS. All samples show a strong Raman signal at a well-defined chemical shift of 463 cm⁻¹ and a significant symmetry feature was observed, suggesting that the tetravalent ceria is the dominant species throughout the bulk sample. All the synthesized CeO₂ calcined at different temperatures showed higher adsorption efficiency for Congo red (CR) compared with commercial CeO₂. The adsorption efficiency maintained a steady state of more than 95% when the concentration of CR and adsorption temperature were varied in this study. The kinetic analysis showed that the second-order model was the appropriate model to interpret the adsorption behavior of synthesized CeO₂. The calculated adsorption capacity derived from the second-order model is in good agreement with the experimental data. The isotherm analysis revealed that the Freundlich and D-R models fit well for the synthesized CeO₂ and represent physisorption with a multilayer mechanism. The thermodynamic parameters, including the changes in Gibb's free energy, enthalpy, and entropy, suggested that the adsorption of CR on the synthesized CeO₂ sample was a spontaneous and endothermic process.