Magnetic COFs as catalyst for Fenton-like degradation of sulfamethazine

Covalent organic framework nanomaterials: Syntheses, architectures, and applications

Covalent Organic Frameworks (COFs) are characterized by high thermochemical stability, low backbone density, well-controlled physical and chemical properties, large specific surface volume and porosity, permanently open pore structure, and various synthesis strategies. These remarkable attributes confer COFs with significant potential for a myriad of applications ranging from catalysis technology, gas separation and storage, optoelectronic materials, environmental and energy sciences, and biomedical development. There are many synthetic design methods for COF materials, and dynamic covalent chemistry is the scientific basis of COF materials-oriented design, which gives the error correction ability of the covalent assembly process, and is the key to obtaining crystallization and stability at the same time. However, "crystallinity" and "stability" in the synthesis and preparation of COF materials are often like "You can't have your cake and eat it, too": on the one hand, the reversible covalent bonds used in the synthesis of highly crystalline COF framework are easy to decompose under extreme conditions, which greatly limits its application scenarios; On the other hand, although highly stable COF materials can be prepared by using irreversible covalent bonds, it is usually poor crystalline and difficult to have high performance. In addition, the strict deoxygenation operation required for synthesizing COF materials also limits its macro preparation and large-scale application. Therefore, the synthesis strategy and efficient preparation of highly stable and crystalline COF materials are a major obstacle to the practical application of this field. This paper describes the four structures of COF materials, as well as their synthesis methods, electrical energy-storing electrocatalysis, and significant environmental protection applications. The future directions, prospects, and possible barriers to the development of these materials are envisioned in.

Adsorption of heavy metals by biochar in aqueous solution: A review

Heavy metal pollution (e.g., Cd, Hg, Pb, Cu, Ni, Zn, As and Cr) has become a crucial issue worldwide. Among various remediation strategies, adsorption is widely recognized for its environmental sustainability, cost-effectiveness, and operational simplicity. In this context, biochar has gained significant attention due to its promising adsorption performance. To systematically support adsorption studies, this review compiled essential models for adsorption experiments, including commonly used adsorption kinetics models, isotherm models, and thermodynamic analysis methods. Moreover, we systematically analyzed key factors affecting heavy metal adsorption by biochar, such as its physicochemical properties, environmental pH, temperature, initial concentration, dosage, and the presence of coexisting ions, to identify the conditions that govern adsorption capacity. In addition, the adsorption performance of biochar toward eight significant heavy metals is reviewed in detail, with a focus on elucidating the underlying mechanisms, including complexation, ion exchange, cation-π bonding, electrostatic interactions, and precipitation. Finally, based on identified research gaps and critical challenges, we discuss emerging research tools, including machine learning and advanced surface modifications, to guide the targeted design of biochar materials for enhanced adsorption capacity.

Antibiotic sorption onto MPs in terrestrial environment: a critical review of the transport, bioaccumulation, ecotoxicological effects and prospects

Microplastics (MPs) and antibiotics are prevalent contaminants in terrestrial environment. MPs possess the ability to absorb antibiotics, resulting in the formation of complex pollutants. While the accumulation and fate of MPs and antibiotics in marine ecosystems have been extensively studied, their combined pollution behavior in terrestrial environments remains relatively underexplored. This paper describes the sources, migration, and compound pollution of MPs and antibiotics in soil. It reviews the mechanisms of compound toxicity associated with antibiotics and MPs, combining different biological classifications. Moreover, we highlight the factors that influence the effects of MPs as vectors and the critical elements driving the spread of antibiotic resistance genes (ARGs). These information suggests the potential mitigation measures for MPs contamination from different perspectives to reduce the impact of ARGs-carrying MPs on human health, specifically through transmission via plants, microbes, or terrestrial vertebrates. Finally, we identify gaps in scientific knowledge regarding the interaction between MPs and antibiotics in soil environments, including the need for standardized research methods, multi-dimensional studies on complex ecological effects, and more comprehensive risk assessments of other pollutants on human health. In summary, this paper provides foundational information for assessing their combined toxicity, offers insights into the distribution of these emerging pollutants in soil, and contributes to a better understanding of the environmental impact of these contaminants.

Enhancing Fenton-like reaction mediating performance of covalent organic frameworks through porosity modification

Covalent organic framework (COF) catalytic photocatalysts mediating Fenton-like reactions have been applied to the treatment of organic dyes in printing and dyeing wastewater. However, the photocatalytic performance of original COF is often unsatisfactory. This study investigated the impact of porosity modification strategies on the performance of COF photocatalysts in mediating the removal of organic dyes via Fenton-like reaction. Porosity modification was achieved by increasing the concentration of acetic acid (HAc) catalyst during COF preparation. The modified TAPB-DMTA COF (12M COF) exhibited excellent adsorption and photocatalytic properties. The Fenton-like reaction mediated by 12M COF photocatalysis removed nearly 96% of malachite green (MG) within 20 min, with a rate constant of 0.091 min-1, which was 2.9 and 6.5 times higher than that of g-C3N4 and original COF under the same reaction conditions, respectively. Additionally, the modulation mechanism of porosity modification on COF photocatalysis was explored. The conduction band (CB) of COF was reduced from -0.14 eV to -0.38 eV after porosity modification, facilitating the generation of longer-lived O2•- in the reaction system, which was conducive to efficient MG removal. Anti-interference experiments showed that the photocatalytic Fenton-like reaction system based on 12 M COF was less affected by common anions, cations and dissolved organics, while maintaining a high MG removal rate in tap water, mid-water, secondary clarifier effluent and river water. In summary, porosity modification was an effective strategy to improve the catalytic performance of original COFs. This study presented an efficient metal-free photocatalyst modification strategy for the Fenton-like reaction while avoiding the production of toxic by-products during dye degradation.

Ecotoxicological Effects of Microplastics Combined With Antibiotics in the Aquatic Environment: Recent Developments and Prospects

Both microplastics and antibiotics are commonly found contaminants in aquatic ecosystems. Microplastics have the ability to absorb antibiotic pollutants in water, but the specific adsorption behavior and mechanism are not fully understood, particularly in relation to the impact of microplastics on toxicity in aquatic environments. We review the interaction, mechanism, and transport of microplastics and antibiotics in water environments, with a focus on the main physical characteristics and environmental factors affecting adsorption behavior in water. We also analyze the effects of microplastic carriers on antibiotic transport and long-distance transport in the water environment. The toxic effects of microplastics combined with antibiotics on aquatic organisms are systematically explained, as well as the effect of the adsorption behavior of microplastics on the spread of antibiotic resistance genes. Finally, the scientific knowledge gap and future research directions related to the interactions between microplastics and antibiotics in the water environment are summarized to provide basic information for preventing and treating environmental risks. Environ Toxicol Chem 2024;43:1950-1961. © 2024 SETAC.

Interaction between antibiotics and microplastics: Recent advances and perspective

Both microplastics and antibiotics are emerging pollutants, which are ubiquitous in aquatic environments. With small size, high specific surface area, and attached biofilm, microplastics are capable of adsorbing or biodegrading antibiotic pollutants across aquatic environments. However, the interactions between them are poorly understood, especially factors that affect microplastics' chemical vector effects and the mechanisms driving these interactions. In this review, the properties of microplastics and their interaction behavior and mechanisms towards antibiotics were comprehensively summarized. Particularly, the impact of weathering properties of microplastics and the growth of attached biofilm was highlighted. We concluded that compared with virgin microplastics, aged microplastics usually adsorb more types and quantities of antibiotics from aquatic environments, whilst the attached biofilm could further enhance the adsorption capacities and biodegrade some antibiotics. This review can answer the knowledge gaps of the interaction between microplastics and antibiotics (or other pollutants), offer basic information for evaluating their combined toxicity, provide insights into the distribution of both emerging pollutants in the global water chemical cycle, and inform measures to remove microplastic-antibiotic pollution.

Magnetic Covalent Organic Framework Composites for Wastewater Remediation

Covalent organic frameworks (COFs) with high specific surface area, tailored structure, easy functionalization, and excellent chemical stability have been extensively exploited as fantastic materials in various fields. However, in most cases, COFs prepared in powder form suffer from the disadvantages of tedious operation, strong tendency to agglomerate, and poor recyclability, greatly limiting their practical application in environmental remediation. To tackle these issues, the fabrication of magnetic COFs (MCOFs) has attracted tremendous attention. In this review, several reliable strategies for the fabrication of MCOFs are summarized. In addition, the recent application of MCOFs as outstanding adsorbents for the removal of contaminants including toxic metal ions, dyes, pharmaceuticals and personal care products, and other organic pollutants is discussed. Moreover, in-depth discussions regarding the structural parameters affecting the practical potential of MCOFs are highlighted in detail. Finally, the current challenges and future prospects of MCOFs in this field are provided with the expectation to boost their practical application.

Pd/MIL-100(Fe) as hydrogen activator for FeIII/FeII cycle: Fenton removal of sulfamethazine

Masses of iron sludge generated from engineering practice of classic Fenton reaction constraints its further promotion. Accelerating the FeIII/FeII cycle may be conducive to reducing the initial ferrous slat dosage and the final iron sludge. Based on the reduction of Pd/MIL-100(Fe)-activated hydrogen, an improved Fenton system named MHACF-MIL-100(Fe) was developed at ambient temperature and pressure. 97.8% of sulfamethazine, the target pollutant in this work, could be degraded in 5 min under the conditions of 20 mM H2O2, 25 μM ferrous chloride, initial pH 3.0, 2 g·L-1 composite catalyst Pd/MIL-100(Fe) and hydrogen gas 60 mL·min-1. Combining density functional theory (DFT) calculation and intermediate detection, the degradation of this antibiotic was inferred to start from the cleavage of N-S bond. The catalytic of Pd/MIL-100(Fe), demonstrated by the removal efficiency of SMT and the catalyst morphology, remained intact after six reaction cycles. The present study provides an insight into the promotion of Fenton reaction.

Responses of the microbial community and the production of extracellular polymeric substances to sulfamethazine shocks in a novel two-stage biological contact oxidation system

Introduction

The biological contact oxidation reactor is an effective technology for the treatment of antibiotic wastewater, but there has been little research investigating its performance on the sulfamethazine wastewater treatment.

Methods

In this study, a novel two-stage biological contact oxidation reactor was used for the first time to explore the impact of sulfamethazine (SMZ) on the performance, microbial community, extracellular polymeric substances (EPS), and antibiotic-resistant genes (ARGs).

Results

The chemical oxygen demand (COD) and ammonia nitrogen (NH 4 + -N) removal efficiencies kept stable at 86.93% and 83.97% with 0.1-1 mg/L SMZ addition and were inhibited at 3 mg/L SMZ. The presence of SMZ could affect the production and chemical composition of EPS in the biofilm, especially for the pronounced increase in TB-PN yield in response against the threat of SMZ. Metagenomics sequencing demonstrated that SMZ could impact on the microbial community, a high abundance of Candidatus_Promineofilum, unclassified_c__Anaerolineae, and unclassified_c__Betaproteobacteria were positively correlated to SMZ, especially for Candidatus_Promineofilum.

Discussion

Candidatus_Promineofilum not only had the ability of EPS secretion, but also was significantly associated with the primary SMZ resistance genes of sul1 and sul2, which developed resistance against SMZ pressure through the mechanism of targeted gene changes, further provided a useful and easy-implement technology for sulfamethazine wastewater treatment.

Organic Covalent Interaction-based Frameworks as Emerging Catalysts for Environment and Energy Applications: Current Scenario and Opportunities

The term "covalent organic framework" (COF) refers to a class of porous organic polymeric materials made from organic building blocks that have been covalently bonded. The preplanned and predetermined bonding of the monomer linkers allow them to demonstrate directional flexibility in two- or three-dimensional spaces. COFs are modern materials, and the discovery of new synthesis and linking techniques has made it possible to prepare them with a variety of favorable features and use them in a range of applications. Additionally, they can be post-synthetically altered or transformed into other materials of particular interest to produce compounds with enhanced chemical and physical properties. Because of its tunability in different chemical and physical states, post-synthetic modifications, high stability, functionality, high porosity and ordered geometry, COFs are regarded as one of the most promising materials for catalysis and environmental applications. This study highlights the basic advancements in establishing the stable COFs structures and various post-synthetic modification approaches. Further, the photocatalytic applications, such as organic transformations, degradation of emerging pollutants and removal of heavy metals, production of hydrogen and Conversion of carbon dioxide (CO₂ ) to useful products have also been presented. Finally, the future research directions and probable outcomes have also been summarized, by focusing their promises for specialists in a variety of research fields.

Role of oxygen vacancy in spinel (FeCoNiCrMn)3O4 high entropy oxides prepared via two different methods for the selective CH bond oxidation of p-chlorotoluene

The selective CH bond oxidation of aromatic hydrocarbon is an interesting but challenging task, it is desirable to develop efficient heterogeneous non-noble metal catalyst for this reaction. Herein, two kinds of spinel (FeCoNiCrMn)₃O₄ high entropy oxides were fabricated via two different methods (i.e., c-FeCoNiCrMn, prepared by a co-precipitation method, and m-FeCoNiCrMn, prepared by physically mixing method). Different from traditional environmentally-unfriendly Co/Mn/Br system, the prepared catalysts were employed for the selective CH bond oxidation of p-chlorotoluene to p-chlorobenzaldehyde in a green approach. Compared to m-FeCoNiCrMn, c-FeCoNiCrMn have smaller particles size and larger specific surface area, which were related to the enhanced catalytic activity. More importantly, characterization results disclosed that abundant oxygen vacancies were formed over c-FeCoNiCrMn. Such a result facilitated the adsorption of p-chlorotoluene on the catalyst surface and promoted the formation of *ClPhCH₂O intermediate as well as the desired p-chlorobenzaldehyde, as revealed by DFT (Density functional theory) calculations. Besides, scavenger tests and EPR (Electron paramagnetic resonance) results indicated that hydroxyl radical derived from H₂O₂ homolysis was the main active oxidative species for this reaction. This work revealed the role of oxygen vacancy in spinel high entropy oxide and also demonstrated its promising application for the selective CH bond oxidation in an environmentally-benign approach.

Treatment of Olefin plant spent caustic by combination of Fenton-like and foam fractionation methods in a bench scale

Spent Merox caustic (SMC) is a hazardous waste that is produced during the Merox desulfurization process in the petroleum refinery industry and should be treated before discharging to environment. In the present study, treatment of SMC was investigated by three methods including Fenton-like process, foam fractionation, and a combination of both processes. Immobilized TiO₂/Fe⁰ on modified silica nanoparticles was used as a heterogeneous Fenton-like catalyst. The chemical and physical characteristics of the catalyst were determined using Fourier-transform infrared spectroscopy, X-ray diffraction, diffuse reflectance spectroscopy, thermogravimetric analysis, differential scanning calorimetry, and transmission electron microscopy techniques. The treatment performance of the combined method was measured as a cost-effective method with chemical oxygen demand (COD) removal percentage. The effect of parameters including pH, gas flow rate, surfactant type and concentration of hydrogen peroxide, catalyst, and chelate were investigated. It is found that the prepared heterogeneous catalyst has high activity for the treatment of SMC. In addition, the results showed that the combined method achieved 97.6 ± 0.5% COD removal, while the measured values for Fenton or foam fractionation methods alone did not exceed 85.5 ± 1% and 47.2 ± 0.4%, respectively. The advantage of combination process over foam fractionation was the use of an advanced oxidation process in the separating column to eliminate or reduce the secondary phase contamination load. Besides, the role of the column in the effective contact of contaminants with the rising bubbles improved the degradation performance of the proposed process and reduced the consumption of hydrogen peroxide by 46% compared to the Fenton-like method.

Covalent organic framework-based porous materials for harmful gas purification

Covalent organic frameworks (COFs) with 2D or 3D networks are a class of novel porous crystalline materials, and have attracted more and more attention in the field of gas purification owing to their attractive physicochemical properties, such as high surface area, adjustable functionality and structure, low density, and high stability. However, few systematic reviews about the application statuses of COFs in gas purification are available, especially about non-CO₂ harmful gases. In this review, the recent progress of COFs about the capture, catalysis, and detection of common harmful gases (such as CO₂, NO_x, SO₂, H₂S, NH₃ and volatile pollutants) were comprehensively discussed. The design strategies of COF functional materials from porosity adjustment to surface functionalization (including bottom-up approach, post-synthetic approach, and blending with other materials) for certain application were summarized in detail. Furthermore, the faced challenges and future research directions of COFs in the harmful gas treatment were clearly proposed to inspire the development of COFs.

NaCl template-assisted synthesis of self-floating COFs foams for the efficient removal of sulfamerazine

The preparation of hierarchical porous covalent organic frameworks (HP-COFs) is of great significance due to their inherent porosity and low density. However, it is still very challenging owing to the poor machinability of COFs. Herein, a simple and cost-efficient strategy for the synthesis of HP-COFs was proposed. In particular, p-toluenesulfonic acid and NaCl, both of which can be recycled, are utilized as catalyst and template, respectively. The resulting HP-TpBD-900 featuring abundant macropore and mesopore as well as large specific surface area (~700 m² g^-1) possessed self-floating ability and was turned out to be a promising adsorbent for the efficient removal of sulfamerazine (SMR) in aqueous solution. The maximum adsorption capacity is 168 mg g^-1, which is more than twice in comparison to that of material prepared without NaCl template. In addition, no significant decrease in adsorption capacity was observed after 5 cycles. Furthermore, the density functional theory (DFT) method was utilized to elucidate the adsorption mechanism, which could be dominated by hydrogen bonding and C-H···π interaction. This work not only provides a new strategy for the synthesis of HP-COFs, but also contributes to boosting the application of COFs in the field of wastewater treatment.

Covalent organic frameworks-based smart materials for mitigation of pharmaceutical pollutants from aqueous solution

Covalent organic frameworks (COFs) are an emergent group of crystalline porous materials that have gained incredible interest in recent years. With foreseeable controllable functionalities and structural configurations, the constructions and catalytic properties of these organic polymeric materials can be controlled to fabricate targeted materials. The specified monomer linkers and pre-designed architecture of COFs facilitate the post-synthetic modifications for introducing novel functions and useful properties. By virtue of inherent porosity, robust framework, well-ordered geometry, functionality, higher stability, and amenability to functionalization, COFs and COFs-based composites are regarded as prospective nanomaterials for environmental clean-up and remediation. This report spotlights the state-of-the-art advances and progress in COFs-based materials to efficiently mitigate pharmaceutical-based environmental pollutants from aqueous solutions. Synthesis approaches, structure, functionalization, and sustainability aspects of COFs are discussed. Moreover, the adsorptive and photocatalytic potential of COFs and their derived nanocomposites for removal and degradation of pharmaceuticals are thoroughly vetted. In addition to deciphering adsorption mechanism/isotherms, the stability, regeneratability and reproducibility are also delineated. Lastly, the outcomes are summed up, and new directions are proposed to widen the promise of COF-based smart materials in diverse fields.

Optimization of electrochemical activation of persulfate by BDD electrodes for rapid removal of sulfamethazine

Boron-doped diamond electrodes have been employed for the removal of sulfamethazine (SMZ) from water by electrochemical activation of persulfate (EO/BDD-PS). A set of experiments with a central composite design (CCD) was conducted to optimize the operating parameters such as persulfate dose, solution pH, and current density by response surface methodology (RSM). The experimental results indicated a rapid degradation of SMZ even at high initial concentrations. For instance, complete degradation of 50 mg L^-1 of SMZ was attained after 15 min at the optimum operating conditions (persulfate loading = 0.40 g L^-1, pH = 4, and current density = 21 mA cm^-2). The oxidation mechanism of EO/BDD-PS process was studied based on the reactive oxidant species (ROS) revealing that both (OH) and contributed to the degradation of SMZ in the EO/BDD-PS system. Furthermore, the oxidation pathway has been proposed by the suspect screening and tandem mass spectrometry analysis. The performance of EO/BDD-PS showed faster SMZ degradation than electro-Fenton and anodic oxidation processes using the same BDD electrochemical reactor under the same conditions. Furthermore, we provided a cost estimation study revealing that a full-scale application of the EO/BDD-PS system for the treatment of similar contaminated water costs about $2.23 m^-3.

Study on the efficiency of a covalent organic framework as adsorbent for the screening of pharmaceuticals in estuary waters

Herein, we demonstrate, for the first time, that covalent organic frameworks (COFs) can be efficient adsorbents for the screening of pharmaceuticals in real water samples, obtaining highly representative data on their occurrence and avoiding the cost of carrying high volume samples and tedious and costly clean-up and preconcentration steps. Of the 23 pharmaceuticals found present in the water samples from the Tagus river estuary using state-of-the-art solid-phase extraction (SPE), 22 were also detected (adsorbed and recovered for analysis) using a COF as the adsorbent material with adsorption efficiency of over 80% for nearly all compounds. In specific cases, acidification of the water samples was identified to lead to a dramatic loss of adsorption efficiency, underlining the effect of sample pre-treatment on the results. The COF efficiently adsorbed (>80%) 19 pharmaceuticals without acid treatment of the sample, highlighting the potential of this class of materials for representative in situ passive adsorption of pharmaceuticals, making this material suitable for being used in water monitoring programs as a simple and cost-efficient sample preparation procedure. In the case of α-hydroxyalprazolam and diclofenac, the COF outperformed the SPE procedure in the recovery efficiency. Although further efforts should be made in tailoring the desorption of the pharmaceuticals from the COF by using different solvents or solvent mixtures, we propose COFs as convenient adsorbent for broad-scope screening and as an efficient adsorbent material to target specific classes of pharmaceuticals. To the best of our knowledge, this is the first study on the use of COFs for contaminant screening in real, naturally contaminated water samples.

Fe-based Fenton-like catalysts for water treatment: Preparation, characterization and modification

Fenton reaction based on hydroxyl radicals () is effective for environment remediation. Nevertheless, the conventional Fenton reaction has several disadvantages, such as working at acidic pH, producing iron-containing sludge, and the difficulty in catalysts reuse. Fenton-like reaction using solid catalysts rather than Fe²⁺ has received increasing attention. To date, Fe-based catalysts have received increasing attention due to their earth abundance, good biocompatibility, comparatively low toxicity and ready availability, it is necessary to review the current status of Fenton-like catalysts. In this review, the recent advances in Fe-based Fenton-like catalysts were systematically analyzed and summarized. Firstly, the various preparation methods were introduced, including template-free methods (precipitation, sol gel, impregnation, hydrothermal, thermal, and others) and template-based methods (hard-templating method and soft-templating method); then, the characterization techniques for Fe-based catalysts were summarized, such as X-ray diffraction (XRD), Brunauer, Emmett and Teller (BET), SEM (scanning electron microscopy)/TEM (transmission electron microscopy)/HRTEM (high-resolution TEM), FTIR (Fourier transform infrared spectroscopy)/Raman, XPS (X-ray photoelectron spectroscopy), ⁵⁷Fe Mössbauer spectroscopy etc.; thirdly, some important conventional Fe-based catalysts were introduced, including iron oxides and oxyhydroxides, zero-valent iron (ZVI) and iron disulfide and oxychloride; fourthly, the modification strategies of Fe-based catalysts were discussed, such as microstructure controlling, introduction of support materials, construction of core-shell structure and incorporation of new metal-containing component; Finally, concluding remarks were given and the future perspectives for further study were discussed. This review will provide important information to further advance the development and application of Fe-based catalysts for water treatment.