A strategy to enhance the photocatalytic efficiency of α-Fe2O3

Formulating InVO4/α-Fe2O3 Heterojunction Composites for Photocatalytic Tetracycline Hydrochloride Degradation

This study reports the synthesis of InVO4/α-Fe2O3 heterojunction photocatalysts with different stoichiometric ratios via a two-step hydrothermal synthesis reaction. The prepared photocatalysts were characterized by XRD, SEM, TEM, XPS, and other methods. The prepared composites exhibited good photocatalysis of tetracycline hydrochloride. Among the InVO4/α-Fe2O3 heterojunction photocatalysts with different ratios, the InVO4/0.25α-Fe2O3 photocatalyst showed the highest degradation rate for 20 mg L-1 tetracycline hydrochloride. After three photocatalytic runs, it still exhibited excellent stability and reusability. Meanwhile, this study also found that superoxide radical anion (-O2-), electron (e-), hydroxyl radical (·OH), and photogenerated hole (h+) are the basic active substances in the photocatalytic process.

Multifunctional photocatalyst of graphitic carbon embedded with Fe2O3/Fe3O4 nanocrystals derived from lichen for efficient photodegradation of tetracycline and methyl blue

We propose a feasible and economical method of constructing biomass-based multifunctional photocatalysts with excellent adsorption performance and high photodegradation abilities toward tetracycline (TC) and methyl blue (MB) under visible light. A series of novel hybrids of porous graphitic carbon embedded with Fe2O3/Fe3O4 nanocrystals (denoted as Fe2O3/Fe3O4@C) were derived from lichen doped with different dosages of Fe3+ by calcination at 700°C under a N2 atmosphere. The Fe2O3/Fe3O4@C hybrids exhibited nanoflake-like shapes, mesoporous structures, and efficient visible light harvesting, thus indicating enhanced adsorption ability and photoactivity toward pollutants. The formed Fe2O3/Fe3O4 heterojunction improved the separation efficiency and inhibited the recombination of photogenerated carriers, whereas the carbon network improved the transfer of photogenerated electrons. Under optimised conditions, the Fe2O3/Fe3O4@C-1 hybrid demonstrated enhanced photodegradation efficiencies of 96.4% for TC and 100% for MB under visible light. In addition, electron spin resonance and trapping measurements were performed to identify active species and determine the photocatalytic mechanism toward pollutants. •O2- and •OH were the active species involved, playing critical roles in the TC and MB photodegradation processes. In addition, a bacterium test revealed that the products of TC degradation by Fe2O3/Fe3O4@C-1 showed low biological toxicity. This work provides a promising preparation strategy or biomass-based photocatalysts for application in environmental pollutant treatment.

The Promise of Metal-Doped Iron Oxide Nanoparticles as Antimicrobial Agent

Antibiotic resistance (AMR) is one of the pressing global public health concerns and projections indicate a potential 10 million fatalities by the year 2050. The decreasing effectiveness of commercially available antibiotics due to the drug resistance phenomenon has spurred research efforts to develop potent and safe antimicrobial agents. Iron oxide nanoparticles (IONPs), especially when doped with metals, have emerged as a promising avenue for combating microbial infections. Like IONPs, the antimicrobial activities of doped-IONPs are also linked to their surface charge, size, and shape. Doping metals on nanoparticles can alter the size and magnetic properties by reducing the energy band gap and combining electronic charges with spins. Furthermore, smaller metal-doped nanoparticles tend to exhibit enhanced antimicrobial activity due to their higher surface-to-volume ratio, facilitating greater interaction with bacterial cells. Moreover, metal doping can also lead to increased charge density in magnetic nanoparticles and thereby elevate reactive oxygen species (ROS) generation. These ROS play a vital role to disrupt bacterial cell membrane, proteins, or nucleic acids. In this review, we compared the antimicrobial activities of different doped-IONPs, elucidated their mechanism(s), and put forth opinions for improved biocompatibility.

Emerging aspects of metal ions-doped zinc oxide photocatalysts in degradation of organic dyes and pharmaceutical pollutants - A review

In recent periods, a broad assortment of continual organic contaminants has been released into our natural water resources. Indeed, it is exceedingly poisonous and perilous to living things; thus, the elimination of these organic pollutants before release into the water bodies is vital. A variety of techniques have been utilized to remove these organic pollutants with advanced oxidation photocatalytic methods with zinc oxide (ZnO) nanoparticles being commonly used as a capable catalyst for contaminated water treatment. Nevertheless, its broad energy gap, which can be only stimulated under an ultraviolet (UV) light source, and high recombination pairs of electrons and holes limit their photocatalytic behaviors. However, numerous methods have been suggested to decrease its energy gap for visible regions. Including, the doping ZnO with metal ions (dopant) can be considered as an effectual route not only the reason for a movement of the absorption edges toward the higher (visible light) region but also to lower the electron-hole pair (e--h+) recombination. This review concentrated on the impact of dissimilar types of metal ions (dopants) on the advancement in the degradation performance of ZnO. So, this work demonstrates a vital review of contemporary attainments in the alteration of ZnO nanoparticles for organic pollutants eliminations. Besides, the effect of doping ions including transition metals, rare earth metals, and metal ions (substitutional and interstitial) concerning numerous types of altered ZnO are summarized. The photodegradation mechanisms for pristine and metal-modified ZnO nanoparticles are also conferred.

The role of tin species in doped iron (III) oxide for photocatalytic degradation of methyl orange dye under UV light

Iron (III) oxide, a stable semiconductor with versatile applications, was synthesized alongside Sn-doped Fe₂O₃ (Sn-Fe₂O₃) using the sol-gel technique. Characterization via X-ray diffraction, field-emission scanning electron microscopy, and UV-visible spectroscopy confirmed the presence of α- and γ-Fe2O3 phases in the synthesized powders. Incorporation of the dopant reduced the initial band gap energy of Fe₂O₃ (2.2 eV) by approximately 0.1 eV. To evaluate photocatalytic performance, Fe₂O₃ and Sn-Fe₂O₃ were tested for decolorization efficiency of a methyl orange solution. Results revealed the 5 wt% Sn-doped catalyst as optimal, achieving complete degradation of methyl orange within 120 min under simulated solar light. The addition of small amounts of Sn effectively reduced the Fe₂O₃ band gap and significantly enhanced photocatalytic performance. Investigation of pH and dye concentration impact on photocatalytic degradation revealed superior activity under acidic conditions compared to alkaline. Furthermore, maintaining a moderate concentration of methyl orange (10 ppm) ensured optimum photocatalytic activity.

Eco-friendly and solar light-active Ti-Fe2O3 ellipsoidal capsules' nanostructure for removal of herbicides and organic dyes

In this work, Ti-doped Fe2O3 with hollow ellipsoidal capsules nanostructure has been prepared in a green manner using plant extract (flax seed). This new green hematite nanomaterial has been evaluated as photocatalyst for water treatment by testing its activity for degradation of bromophenol blue dye (BPB) and 2,4-dichlorophenoxy acetic acid (2,4-D) herbicide. For a better understanding of the green material properties, a comparison with the pristine Fe2O3 nanospheres previously prepared by the same procedure is included. Structural and optical properties of the green prepared materials are studied. The results revealed the success doping of Ti4+ at Fe3+ site, without forming any of TiO2 phases. It was also found that the Ti doping resulted in the reduction of the band gap of Fe2O3 as well as changing the morphology. The Ti-doped Fe2O3 nanomaterial exhibited an enhanced photocatalytic activity either for BPB dye or for 2,4-D degradation with more than 2 times higher rate than that using pristine Fe2O3.

Visible light photocatalytic and magnetic properties of V doped α-Fe2O3 (VFO) nanoparticles synthesized by polyol assisted hydrothermal method

Vanadium-doped α-Fe₂O₃ nanoparticles (VFO nanoparticles) were prepared by polyol-assisted hydrothermal method. The impact on the structure, optical, magnetic and photocatalytic properties of α-Fe₂O₃ nanoparticles were studied by varying the vanadium concentration from 1 to 5%. XRD analysis confirms the presence of hematite phase with hexagonal structure and estimates the nanocrystals size as ∼26-38 nm. FESEM and TEM reveal the formation of 3D flower-like morphology bundled with 2D nanoflakes. The estimated band gap energy was in the range 2.01 eV-2.12 eV. XPS study shows the presence of vanadium in V⁴⁺ oxidation state in VFO nanoparticles. VSM study shows a non-saturated hysteresis loop with weak ferromagnetic behavior for all the VFO nanoparticles. 5% V doped α-Fe₂O₃ nanoparticles (5%VFO nanoparticles) exhibited superior visible light driven photocatalytic activity compared to other samples.

Fabrication of TiO2 Spheres and a Visible Light Active α-Fe2O3/TiO2-Rutile/TiO2-Anatase Heterogeneous Photocatalyst from Natural Ilmenite

High-purity (98.8%, TiO₂) rutile nanoparticles were successfully synthesized using ilmenite sand as the initial titanium source. This novel synthesis method was cost-effective and straightforward due to the absence of the traditional gravity, magnetic, electrostatic separation, ball milling, and smelting processes. Synthesized TiO₂ nanoparticles were 99% pure. Also, highly corrosive environmentally hazardous acid leachate generated during the leaching process of ilmenite sand was effectively converted into a highly efficient visible light active photocatalyst. The prepared photocatalyst system consists of anatase-TiO₂/rutile-TiO₂/Fe₂O₃ (TF-800), rutile-TiO₂/Fe₂TiO₅ (TFTO-800), and anatase-TiO₂/Fe₃O₄ (TF-450) nanocomposites, respectively. The pseudo-second-order adsorption rate of the TF-800 ternary nanocomposite was 0.126 g mg^-1 min^-1 in dark conditions, and a 0.044 min^-1 visible light initial photodegradation rate was exhibited. The TFTO-800 binary nanocomposite adsorbed methylene blue (MB) following pseudo-second-order adsorption (0.224 g mg^-1 min^-1) in the dark, and the rate constant for photodegradation of MB in visible light was 0.006 min^-1. The prepared TF-450 nanocomposite did not display excellent adsorptive and photocatalytic performances throughout the experiment period. The synthesized TF-800 and TFTO-800 were able to degrade 93.1 and 49.8% of a 100 mL, 10 ppm MB dye solution within 180 min, respectively.

Humic acid promoted activation of peroxymonosulfate by Fe3S4 for degradation of 2,4,6-trichlorophenol: An experimental and theoretical study

Chlorophenols are difficult to degrade and biohazardous in the natural environment. This study demonstrated that humic acid (HA) could promote Fe₃S₄ activation of peroxymonosulfate (PMS) to degrade 2,4,6-trichlorophenol (TCP), the degradation efficiency of TCP was increased by 33%. The system of Fe₃S₄-HA/PMS produced more reactive oxygen species, and •OH was the dominant ROS. The genealogy of iron oxides together with S⁰ on the Fe₃S₄ surface inhibited PMS activation leading to the significant reduction of TCP degraded (< 70%). These problems could be solved successfully through introducing HA, which facilitated electron transfer and increased the continuous release of iron ions by 2 times. In accordance with the determined density functional theory (DFT), the degradation pathway was put forward, which indicated that TCP dechlorination and oxidation to 2,6-dichloro-1,4-benzoquinone constituted the main degradation pathway. Furthermore, the intermediates that were produced in the main degradation processes of TCP showed lower toxicity than TCP according to results that were obtained utilizing the calculations of quantitative structure-activity relationship (QSAR) together with Toxicity Estimation Software Tool (TEST). Thus, the Fe₃S₄-HA/PMS system was demonstrated to be an efficient and safe technology for organic pollutant degradation in contaminated groundwater and surface water environments.

Green synthesis of SrFe12O19@Ag and SrFe12O19@Au as magnetic plasmonic nanocomposites with high photocatalytic performance for degradation of organic pollutants

Magnetic-plasmonic nanocomposites are suitable candidates for photocatalytic activity due to both optical and magnetic properties. So initially, we synthesized strontium hexaferrite nanoparticles (NPs) by three different methods: microwave, sol-gel Pechini, sol-gel auto-combustion, and SrFe₁₂O₁₉@Ag, SrFe₁₂O₁₉@Au core-shell by ultrasound-assisted auto-combustion in the presence of beetroot juice. X-Ray Powder Diffraction (XRD), Fourier Transform Infrared (FT-IR), Energy Dispersive X-Ray (EDX), Field Emission Scanning Electron Microscopy (FE-SEM), Transmission Electron Microscopy (TEM), Brunauer-Emmett-Teller (BET), Diffuse Reflectance Spectroscopy (DRS), and Vibrating Sample Magnetometer (VSM) analyses were utilized to examine their purity, morphology, optical and magnetic properties. The nanoproducts were applied as photocatalysts to degrade the anionic dyes with different chromophores under various visible light sources within 2 h. Among different dyes (mono-azo, diazo, anthraquinone, and triaryl methane), Eosin as a triaryl methane dye had the maximum degradation by SrFe₁₂O₁₉@Ag and SrFe₁₂O₁₉@Au, which are about 95.9%, 93.88%, respectively. Indeed, produced surface plasmon resonance (SPR) electrons by the noble metals facilitate the formation of active radicals to destruct the dyes.

Investigation of pure and g-C3N4 loaded CdWO4 photocatalytic activity on reducing toxic pollutants

A facile synthesis of pristine and g-C₃N₄ loaded CdWO₄ (Cadmium Tungstate) were reported and analyzed the effect of pollutants removal in wastewater. The samples were characterized and the morphology of the pristine sample showed the nanostructures with high cluster of layer formed. While adding PEG (Polyethylene glycol), the surface has exhibited less agglomeration and in g-C₃N₄ added sample the agglomeration was intensely reduced and nanostructures have been clearly found. Photocatalytic performance on cationic dye was investigated under visible light. The efficiency calculated for g-C₃N₄- CdWO₄ sample was 85% for MB. The C/C₀ plot gives better degradation. The kinetic study revealed pseudo first order reaction. The g-C₃N₄-CdWO₄ sample exhibited higher "k" value which proved best efficiency on removing the pollutant. g-C₃N₄-CdWO₄ sample will make better reduction on toxic pollutants and be a good candidate in futuristic applications. By carbon based derivates inclusion with photo active materials, the morphology and surface area was greatly improved and it enhances activity of host material and it will be the promising material for industrial applications.

Using egg ovalbumin to synthesize pure α-Fe2O3 and cobalt doped α-Fe2O3: structural, morphological, optical and photocatalytic properties

Nanoparticles of undoped hematite (α-Fe2O3) and Co doped α-Fe2O3 were prepared by a simple, green, and cost-efficient process using Co and Fe chlorides and freshly isolated hen egg white. Several techniques of characterization, such as differential thermal and thermogravimetric analysis (DTA/TG), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), EDS analysis, X-ray diffraction analysis (XRD), and Ultra-violet Visible (UV-Vis) analysis were applied. The incorporation of Co particles into the hematite matrix limits the growth of the α-Fe2O3 crystalline grain and favours the apparition of γ-Fe2O3 phase. SEM analysis reveals that there are no significant morphological differences among α-Fe2O3 and Co-α-Fe2O3 particles, whereas the XPS analysis confirms the existence of Fe and Co particles in the as-prepared samples. The optical study shows a slight reduction of band gap energy for Co doped α-Fe2O3 compared to the non-doped α-Fe2O3, which has shown enhanced visible light adsorption performance. On the other hand, the α-Fe2O3 and Co-α-Fe2O3 nano-photocatalysts with an average crystallite size of 21 and 43 nm respectively, were used to remove the Methylene Blue (MB) dye from aqueous solutions after being exposed to visible light. In a mechanistic study, the radicals OH• and •O2 - were shown to be important in the degradation of MB dye. To optimise the effective parameters on MB dye degradation, the experimental parameters applied in the adsorption experiments, such as pH, photocatalyst dosage, contact time, and temperature, were tested. The optimal conditions were determined as pH = 12, photocatalyst dosage = 0.2 g/L. Degradation efficiency in the optimal conditions is 91.8 % after 120 min of irradiation. The pseudo-first and second orders were used to model the kinetic data. The removal of MB using α-Fe2O3 and Co-α-Fe2O3 photocatalysts matched well with pseudo-second-order reaction kinetics. Furthermore, the thermodynamic study reveals that MB dye adsorption on the Co-Fe2O3 absorbent was an endothermic and spontaneous process.

Nitrogen doped carbon spheres from Tamarindus indica shell decorated with vanadium pentoxide; photoelectrochemical water splitting, photochemical hydrogen evolution & degradation of Bisphenol A

At present energy and environmental remediation are of highest priority for the well defined sustainability. Multifunctional materials that solve both the issues are on high demand. In the present work, a simple method has been followed to extract carbon spheres fromTamarindus indica(commonly known astamarind fruit) shelland doped with nitrogen (N-CS). Vanadium pentoxide nanoflakes were decorated aroundN-CS and the resultant is labeled as V₂O₅/N-CS nanocomposite. The spectroscopic, microscopic, elemental mapping and x-ray photoelectron spectroscopic characterization confirm the nitrogen doping and formation of hybrid material. N-CS, V₂O₅, and V₂O₅/N-CS nanocompositehave been evaluated for their efficiency to evolve hydrogen and for degradation of Bisphenol A (BPA) under visible light. In addition, electrocatalytic hydrogen evolution in presence of light has also been evaluated. The DRS spectrum proves the decrease in the bandgap of V₂O₅ upon its decoration around N-CS material. In a photochemical experiment, the V₂O₅/N-CS nanocomposite evolved 18,600 μmolg^-1 of H_2.Electrochemical hydrogen evolution has also been evaluated in presence of light and obtained the onset potential of -60mV with 52 mV dec^-1 Tafel slope value. Scavenger studies indicate superoxide radicals and hydroxyl radicals are the active species responsible for the degradation of BPA. BPA degradation pathway has been predicted with the support of LC-MS results of the intermediates. All these results indicate the synthesized nanocomposite could be an efficient, stable multifunctional material for photocatalytic applications.

Recycling Rusty Iron with Natural Zeolite Heulandite to Create a Unique Nanocatalyst for Green Hydrogen Production

Corrosion-induced iron rust causes severe danger, pollution, and economic problems. In this work, nanopowders of Fe2O3 and Fe2O3/zeolite are synthesized for the first time using rusted iron waste and natural zeolite heulandite by chemical precipitation. The chemical composition, nanomorphologies, structural parameters, and optical behaviors are investigated using different techniques. The Fe2O3/zeolite nanocomposite showed smaller sizes and greater light absorption capability in visible light than Fe2O3 nanopowder. The XRD pattern shows crystalline hematite (α-Fe2O3) with a rhombohedral structure. The crystallite sizes for the plane (104) of the Fe2O3 and Fe2O3/zeolite are 64.84 and 56.53 nm, respectively. The Fe2O3 and Fe2O3/zeolite have indirect bandgap values of 1.87 and 1.91 eV and direct bandgap values of 2.04 and 2.07 eV, respectively. Fe2O3 and Fe2O3/zeolite nanophotocatalysts are used for solar photoelectrochemical (PEC) hydrogen production. The Fe2O3/zeolite exhibits a PEC catalytic hydrogen production rate of 154.45 mmol/g.h @ 1 V in 0.9 M KOH solution, which is the highest value yet for Fe2O3-based photocatalysts. The photocurrent density of Fe2O3/zeolite is almost two times that of Fe2O3 catalyst, and the IPCE (incident photon-to-current conversion efficiency) reached ~27.34%@307 nm and 1 V. The electrochemical surface area (ECSA) values for Fe2O3 and Fe2O3/zeolite photocatalysts were 7.414 and 21.236 m2/g, respectively. The rate of hydrogen production for Fe2O3/zeolite was 154.44 mmol h-1/g. This nanophotocatalyst has a very low PEC corrosion rate of 7.6 pm/year; it can retain ~97% of its initial performance. Therefore, the present research can be applied industrially as a cost-effective technique to address two issues at once by producing solar hydrogen fuel and recycling the rusted iron wires.

A Comparative Study of Cerium- and Ytterbium-Based GO/g-C3N4/Fe2O3 Composites for Electrochemical and Photocatalytic Applications

The design of sustainable and efficient materials for efficient energy storage and degradation of environmental pollutants (specifically organic dyes) is a matter of major interest these days. For this purpose, cerium- and ytterbium-based GO/g-C3N4/Fe2O3 composites have been synthesized to explore their properties, especially in charge storage devices such as supercapacitors, and also as photocatalysts for the degradation of carcinogenic dyes from the environment. Physicochemical studies have been carried out using XRD, FTIR, SEM, and BET techniques. Electrochemical techniques (cyclic voltammetry, galvanic charge discharge, and electrochemical impedance spectroscopy) have been employed to measure super-capacitance and EDLC properties. Results show that the gravimetric capacitance calculated from GCD results is 219 Fg−1 for ytterbium- and 169 Fg−1 for cerium-based nanocomposites at the current density of 1 A/g and scan rate of 2 mV/sec. The specific capacitance calculated for the ytterbium-based nanocomposite is 189 Fg−1 as compared to 125 Fg−1 for the cerium-based material. EIS results pointed to an enhanced resistance offered by cerium-based nanocomposites as compared to that of ytterbium, which can be assumed with the difference in particle size, as confirmed from structural studies including XRD. From obtained results, ytterbium oxide-based GO/g-C3N4/Fe2O3 is proven to be a better electro-catalyst as compared to cerium-based nanocomposites. Photocatalytic results are also in agreement with electrochemical results, as the degradation efficiency of ytterbium oxide-based GO/g-C3N4/Fe2O3 (67.11 and 83.50% for rhodamine B and methylene blue dyes) surpasses values observed for cerium-based GO/g-C3N4/Fe2O3 (63.08 and 70.61%).

A novel high efficiency polar photocatalyst, Zn(IO3)2: synthesis, crystal structure and photocatalytic activity

For Zn(IO₃)₂, there is an internal polarization electric field along the positive b-axis. Under the action of polarization electric field, the photogenerated carriers will quickly migrate to the surface, thus improving the photocatalytic efficiency.