Intracellular organic matter from Chlorella vulgaris enhances the photodegradation of acetaminophen

Effects of polystyrene microplastics on the extracellular and intracellular dissolved organic matter released by Skeletonema costatum using a novel in situ method

Microplastics (MPs) affect the physicochemical algal-dissolved organic matter properties, indirectly influencing the environmental behavior of contaminants including persistent organic pollutants and heavy metals. Limited research is available on the roles played by intracellular- and extracellular-dissolved organic matter (I-DOM and E-DOM) in the processes that affect the environmental behavior of contaminants. Furthermore, the effects of MPs on the production of I-DOM and E-DOM, as well as their environmental behaviors, remain uncertain. A critical issue lies in the challenge of quantitatively identifying I-DOM and E-DOM in situ. In this work, a new fluorescence ratio method was developed and applied to in situ examine the impacts of polystyrene (PS) MPs (50, 500 nm, and 5 μm) on the I-DOM and E-DOM released by Skeletonema costatum (S. costatum). The experimental results indicated that the detection limits were 0.06 mg L-1, with the respective minimum detectable proportions being 2% for both E-DOM and I-DOM. The suppressive effects of 10-50 mg L-1 of 50 and 500 nm PS MPs on the cell proliferation of S. costatum and the E-DOM secretion were most pronounced on day 6. And the rates of suppression of E-DOM secretion were 10.1%-18.2% and 4.2%-13.9%, respectively. The exposure of algal cells to 50 mg L-1 of 50 and 500 nm PS MPs led to cell rupture and the leakage of I-DOM on day 6. This suggests that the developed method in the laboratory could offer a promising approach for studying the generation of E-DOM and I-DOM in situ, as well as their environmental behaviors affected by MPs.

Light-powered biodegradation of Imidacloprid by Scenedesmus sp. TXH202001: Assessing complete removal, metabolic pathways, and toxicity verification

Imidacloprid (IMI) is used extensively as an insecticide and poses a significant risk to both the ecological environment and human health. Biological methods are currently gaining recognition among the different strategies tested for wastewater treatment. This study focused on evaluating a recently discovered green alga, Scenedesmus sp. TXH202001, isolated from a municipal wastewater treatment plant (WWTP), exhibited notable capacity for IMI removal. After an 18-day evaluation, medium IMI concentrations (50 and 100 mg/L) facilitated the growth of microalgae whereas low (5 and 20 mg/L) and high (150 mg/L) concentrations had no discernible impact. No statistically significant disparities were detected in Fv/Fm, Malonaldehyde or Superoxide dismutase across all concentrations, suggesting Scenedesmus sp. TXH202001 exhibited notable resilience and adaptability to IMI conditions. Most notably, Scenedesmus sp. TXH202001 successfully eliminated > 99 % of IMI within 18 days subjected to IMI concentrations as high as 150 mg/L, which was contingent on the environmental factor of illumination. Molecular docking was used to identify the chemical reaction sites between IMI and typical degrading enzyme CYP450. Furthermore, the study revealed that the primary path for IMI removal was biodegradation and verified that the toxicity of the degraded product was lower than parent IMI in Caenorhabditis elegans. The efficacy of Scenedesmus sp. TXH202001 in wastewater was exceptional, thereby validating its practical utility.

Revisiting triplet state dissolved organic matter (3DOM⁎): Advances in probes, photoreactivity, and environmental implications

Triplet-state dissolved organic matter (3DOM⁎) plays a critical role in the photodegradation of organic pollutants in aquatic environments. This review offers a comprehensive overview of 3DOM⁎, focusing on monitoring methods using various probes, formation mechanisms, and photoreactivity. Traditional probes, such as 2,4,6-trimethylphenol (TMP) and sorbic acid, are widely used, while novel probes promise improved accuracy and sensitivity. The E2:E3 ratio emerges as a promising indicator for 3DOM⁎ due to its simplicity and correlation with photoreactivity, though further validation is needed to confirm its broader applicability. This review highlights the higher photoreactivity of DOM with low molecular weight, low aromaticity, and autochthonous sources, although DOM with contrasting features can also show significant photoreactivity. The presence of inorganic ions and nanomaterials significantly influences 3DOM⁎'s degradation capacity, demonstrating complex interactions with surrounding species. Additionally, the review underscores the importance of various environmental factors, including light source and DOM concentration, in affecting the photodegradation rates of contaminants. Recent literature suggests that future research should focus on developing new probes to capture different aspects of 3DOM⁎, exploring the synergistic effects of plastic leachate, and investigating the role of co-existing ions and nanomaterials on 3DOM⁎ activity. Employing machine learning (ML) techniques to predict 3DOM⁎-related parameters from easily measurable DOM descriptors presents an exciting research avenue. Enhanced understanding of 3DOM⁎ can lead to more effective strategies in wastewater treatment and environmental remediation.

Deciphering the Role of Microbial Extracellular and Intracellular Organic Matter in Antibiotic Photodissipation: Molecular and Fluorescent Profiling under Natural Radiation

This study addresses existing gaps in understanding the specific involvement of dissolved organic matter (DOM) fractions in antibiotic photolysis, particularly under natural conditions and during DOM photobleaching. Employing fluorescent, chemical, and molecular analysis techniques, it explores the impact of extracellular and intracellular organic matter (EOM and IOM) on the photodissipation of multiclass antibiotics, coupled with DOM photobleaching under natural solar radiation. Key findings underscore the selective photobleaching of DOM fractions, propelled by distinct chemical profiles, influencing DOM-mediated antibiotic photolysis. Notably, lipid-like substances dominate in the IOM, while lignin-like substances prevail in the EOM, each uniquely responding to sunlight and exhibiting selective photobleaching. Sunlight primarily targets fulvic acid-like lignin components in EOM, contrasting the initial changes observed in tryptophan-like lipid substances in IOM. The lower photolability of EOM, attributed to its rich unsaturated compounds, contributes to an enhanced rate of indirect antibiotic photolysis (0.339-1.402 h-1) through reactive intermediates. Conversely, the abundance of aliphatic compounds in IOM, despite it being highly photolabile, exhibits a lower mediation of antibiotic photolysis (0.067-1.111 h-1). The triplet state excited 3DOM* plays a pivotal role in the phototransformation and toxicity decrease of antibiotics, highlighting microbial EOM's essential role as a natural aquatic photosensitizer for water self-purification. These findings enhance our understanding of DOM dynamics in aquatic systems, particularly in mitigating antibiotic risks, and introduce innovative strategies in environmental management and water treatment technologies.

Unveil the mechanism of photosensitized fluoroquinolones enhancing chlortetracycline photodegradation under simulated sunlight: Batch experiments and DFT calculation

Fluoroquinolones (FQs), as the most commonly used antibiotics, are ubiquitous in the aquatic environment. The FQs' self-sensitization process could generate reactive oxygen species (ROS), which could react with other coexisting organic pollutants, impacting their transformation behaviors. However, the FQs' influences and mechanisms on the photochemical transformation of coexisting antibiotics are not yet revealed. In this study, we found ofloxacin (OFL) and norfloxacin (NOR), the two common FQs, can obviously accelerate chlortetracycline (CTC) photodegradation. In the presence of OFL and NOR (i.e., 10 μM), CTC photodegradation rate constants increased by 181.1% and 82.9%, respectively. With the help of electron paramagnetic resonance (EPR) and quenching experiments, this enhancement was attributed to aromatic ketone structure in FQs, which absorbed photons to generate ROS (i.e., 3OFL*, 3NOR*,1O2, and •OH). Notably, 3OFL* or 3NOR* was dominantly contributed to the enhanced CTC photodegradation, with the contribution ratios of 79.9% and 77.3% in CTC indirect photodegradation, respectively. Compared to CTC direct photodegradation, some new photodegradation products were detected in FQs solution, suggesting that 3OFL* or 3NOR* may oxide CTC through electron transfer. Moreover, the higher triple-excited state energy of OFL and NOR over DFT calculation implied that energy transfer from 3OFL* or 3NOR* to CTC was also theoretically feasible. Therefore, the presence of FQs could significantly accelerate the photodegradation of coexisting antibiotics mainly via electron or energy transfer of 3FQs*. The present study provided a new insight for accurately evaluating environmental behaviors and risks when multiple antibiotics coexist.

Molecular complexation properties of Cd2+ by algal organic matter from Scenedesmus obliquus

A detailed understanding the metals binding with algal organic matter (AOM) is essential to gain a deeper insight into the toxicity and migration of metals in algae cell. However, the molecular complexation mechanism of the metals binding with AOM remains unclear. In this study, cadmium ion (Cd2+) binding properties of AOMs from Scenedesmus obliquus, which included extracellular organic matter (EOM) and intracellular organic matter (IOM), were screened. When Cd2+ < 0.5 mg/L, the accumulation of Cd2+ could reach 40%, while Cd2+ > 0.5 mg/L, the accumulation of Cd2+ was only about 10%. EOM decreased gradually (from 8.51 to 3.98 mg/L), while IOM increased gradually (from 9.62 to 21.00 mg/L). The spectral characteristics revealed that IOM was richer in peptides/proteins and had more hydrophilic than EOM. Both EOM and IOM contained three protein-like components (containing tryptophan and tyrosine) and one humic-like component, and their contents in IOM were higher than that in EOM. The tryptophan protein-like substances changed greatly during Cd2+ binding, and that the tryptophan protein-like substances complexed to Cd2+ before tyrosine protein-like substances in IOM was identified. Moreover, the functional groups of N-H, O-H, and CO in AOM played an important role, and the N-H group was priority to interacts with Cd2+ in the complexing process. More functional groups (such as C-O and C-N) were involved in the metals complexing in EOM than in IOM. It could be concluded that Cd2+ stress promoted the secretion of AOM in Scenedesmus obliquus, and proteins in AOM could complex Cd2+ and alleviate its toxicity to algal cell. These findings provided deep insights into the interaction mechanism of AOM with Cd2+ in aquatic environments.

Aquatic photolysis of high-risk chemicals of emerging concern from secondary effluent mediated by sunlight irradiation for ecological safety and the enhanced methods

Natural sunlight can reduce the chemicals of emerging concern (CECs) and biological effects from the discharged domestic wastewater. But the aquatic photolysis and biotoxic variations of specific CECs detected in secondary effluent (SE) were not clear. In this study, 29 CECs were detected in the SE, and 13 medium- and high-risk CECs were identified as target chemicals based on their ecological risk assessment. To comprehensively explore the photolysis properties of the identified target chemicals, the direct and self-sensitized photodegradation of the target chemicals, even the indirect photodegradation in the mixture, were investigated and compared with these photodegradation in the SE. Of the 13 target chemicals, only five chemicals (including dichlorvos (DDVP), mefenamic acid (MEF), diphenhydramine hydrochloride (DPH), chlorpyrifos (CPF), and imidacloprid (IMI)) underwent direct and self-sensitized photodegradation processes. The removal of DDVP, MEF, and DPH was attributed to self-sensitized photodegradation, which was mainly mediated by •OH; CPF and IMI primarily relied on direct photodegradation. Synergistic and/or antagonistic actions that occurred in the mixture improved/decreased the rate constants of five photodegradable target chemicals. Meanwhile, the biotoxicities (acute toxicity and genotoxicity) of the target chemicals (including individual chemicals and the mixture) were significantly reduced, which can explain the reduction of biotoxicities from SE. For the two refractory high-risk chemicals, atrazine (ATZ) and carbendazim (MBC), algae-derived intracellular dissolved organic matter (IOM) on ATZ, and IOM and extracellular dissolved organic matter (EOM) on MBC had slightly promotion for their photodegradation; while peroxysulfate, and peroxymonosulfate served as sensitizers were activated by natural sunlight and effectively improved their photodegradation rate, and then reduced their biotoxicities. These findings will promote the development of CECs treatment technologies based on sunlight irradiation.

Photo-Reactivity and Photo-Transformation of Algal Dissolved Organic Matter Unraveled by Optical Spectroscopy and High-Resolution Mass Spectrometry Analysis

The rapid proliferation of planktonic algae induced by eutrophication and climate warming make algae dissolved organic matter (AOM) an important source of dissolved organic matter (DOM) in surface waters, but the understanding of the link between AOM composition and photo-reactivity/photo-transformation of DOM in aquatic systems is limited. Here, intracellular organic matter (IOM) from Microcystis aeruginosa was extracted and subjected to molecular weight (MW) fractionation. Results indicated that IOM had lower aromaticity and higher photosensitive activity compared to Suwannee River fulvic acid (SRFA). The photosensitive activity of IOM relied on both its molecular weight distribution and fluorescence components. The IOM fraction with the highest MW proteins had the lowest quantum yields of reactive intermediates (Φ_RIs), which increased with the decrease of MW, while the fractions with more low-excitation tyrosine-like components had relatively higher Φ_RIs. Parallel factor analysis and high-resolution mass spectrometry revealed that light radiation of IOM resulted in the composition transformation from tryptophan-like and tyrosine-like components to humic-like components, forming less aromatic and more saturated recalcitrant dissolved organic carbon. Our findings provide new insights into the photo-reactivity and photo-transformation of algae-derived organic matters and help to predict DOM formation involved in carbon cycling in water environment.

In-situ fabrication of polypyrrole composite with MoO3: An effective interfacial charge transfers and electrode materials for degradation and determination of acetaminophen

Pharmaceutical wastes, acetaminophen (AP) widely used in medical fields, is often discharged into water, causing harm to human health. Hence, there is an urgent need to effectively remove AP from wastewater systems. In this paper, polypyrrole (PPy) composite with MoO₃ has been synthesized via an in-situ polymerization method. The as-prepared materials were thoroughly characterized by XRD, FT-IR, UV-DRS, SEM, TEM and mapping techniques. The as-prepared MoO₃@PPy composite was utilized to removal of AP via photocatalytic degradation and electrochemical determination. Under optimized composite, MoO₃@PPy (2) showed an excellent photocatalytic degradation and electrochemical determination of AP compared to pure MoO₃ and all other composites. The higher catalytic activity was ascribed to the effective interfacial charges transfer, reduce the recombination and enhance the active surface area of electrode via a synergistic effect. The photocatalytic degradation mechanism, rate and kinetic of the reaction were investigated and discussed. The major active degradation species and an effective charge transfer properties were confirmed by trapping experiments and photocurrent spectra. In addition, the MoO₃@PPy (2) modified GCE exhibit the AP determination activity by DPV with a linear range of 0.05-546 μM. The limit of detection and sensitivity of electrode were 0.0007 μM and 0.242 μM^-1 cm^-2 respectively. Moreover, the proposed electrode showed good selectivity, stability and reproducibility. This method was useful for the determination of AP in real samples.

Phototransformation of an emerging cyanotoxin (Aerucyclamide A) in simulated natural waters

Aerucyclamide A (ACA) is an emerging cyanopeptide toxin produced by cyanobacteria, and its transformation pathway has rarely been reported. In the present study, ACA was purified from cyanobacterial extracts, and photodegradation processes were investigated in dissolved organic matter (DOM) solutions. Under simulated solar irradiation, the photodegradation of ACA was dominated by ^•OH oxidation, accounting for ~72% of the indirect photodegradation. The bimolecular reaction rate constant of ACA with ^•OH was (6.4 ± 0.2) × 10⁹M ^- 1s ^- 1. Our results indicated that the major reactive sites of ACA toward ^•OH are thiazoline and thiazole moieties. Product analysis via high-resolution mass spectrometry suggested that hydrogen abstraction and gradual hydroxylation are the main photodegradation pathways. The acute toxicity assessment indicate that the products generated in photolysis process did not show any measurable toxicity to Thamnocephalus platyurus. Photodegradation experiments with various DOM-phycocyanin mixtures demonstrated that the half-life of ACA is much longer than that of microcystin-LR.