Recent advancements of spinel ferrite based binary nanocomposite photocatalysts in wastewater treatment

Recent progress in defect-engineered metal oxides for photocatalytic environmental remediation

Rapid industrial advancement over the last few decades has led to an alarming increase in pollution levels in the ecosystem. Among the primary pollutants, harmful organic dyes and pharmaceutical drugs are directly released by industries into the water bodies which serves as a major cause of environmental deterioration. This warns of a severe need to find some sustainable strategies to overcome these increasing levels of water pollution and eliminate the pollutants before being exposed to the environment. Photocatalysis is a well-established strategy in the field of pollutant degradation and various metal oxides have been proven to exhibit excellent physicochemical properties which makes them a potential candidate for environmental remediation. Further, with the aim of rapid industrialization of photocatalytic pollutant degradation technology, constant efforts have been made to increase the photocatalytic activity of various metal oxides. One such strategy is the introduction of defects into the lattice of the parent catalyst through doping or vacancy which plays a major role in enhancing the catalytic activity and achieving excellent degradation rates. This review provides a comprehensive analysis of defects and their role in altering the photocatalytic activity of the material. Various defect-rich metal oxides like binary oxides, perovskite oxides, and spinel oxides have been summarized for their application in pollutant degradation. Finally, a summary of existing research, followed by the existing challenges along with the potential countermeasures has been provided to pave a path for the future studies and industrialization of this promising field.

A novel nanocomposite for photocatalytic rhodamine B dye removal from wastewater using visible light

Providing safe access to water and addressing the impact of waterborne diseases, which claim over two million lives annually, is a major contribution to water purification. The study introduces a novel nanocomposite, Ch/Fe3O4/α-MoO3, which exhibits outstanding photocatalytic efficacy under visible light. An in-depth investigation of the nanocomposite's synthesis, characterization, and photodegradation mechanisms reveals its outstanding capabilities. Photocatalytic activity is influenced by the catalytic dose, pH, dye concentration, and reaction time, according to the study. A response surface method is used to determine the optimal conditions for Rhodamine B degradation, which results in 96.3% removal efficiency at pH 8.5, dye concentration 25 mg/L, nanocomposite dose at 22 mg/L, and reaction time 50 min. As a result of its high surface area, biocompatibility, availability, and magnetization with iron compounds, Chitosan is an excellent substrate for enhancing the photocatalytic properties of MoO3 nanoparticles. A nanocomposite with an energy band of 3.18 eV exhibits improved visible light absorption. This study confirms the nanocomposite's recyclability and stability, affirming its practicality. Besides dye removal, it offers hope for the global quest for clean water sources by addressing a broader range of waterborne contaminants. By combining molybdenum and magnetite, nanocomposite materials facilitate the degradation of pollutant and bacteria, contributing positively to society's quest for clean and safe water. It emphasizes the role nanotechnology plays in preserving human health and well-being in combating waterborne diseases.

Enhancing photocatalytic wastewater treatment: investigating the promising applications of nickel ferrite and its novel nanocomposites

Water contamination ranks highest among the challenges posed by the rapidly increasing environmental contamination, which is thought to be the most pressing issue globally. The development of innovative techniques for the successful removal of diverse types of undesirable pollutants from wastewater would therefore yield a huge return on investment. Nowadays, the removal of many organic and synthetic pollutants from the environmental matrix is anticipated to be possible by photocatalytic degradation, owing to its low energy consumption, high catalytic activity, and low overall cost. In this context, magnetic nanoparticles received greater attention as photocatalytic materials from the scientific community in wastewater treatment for the removal of different kinds of pollutants due to their specific properties. The present study provides an overview of the recent advances in water treatment using nickel ferrite nanoparticles and their nanocomposites as photocatalysts. Furthermore, a proposed mechanism for these photocatalysts to generate active free radicals under visible and ultraviolet light has been described. The review concludes that photocatalysts based on NiFe2O4 have potential applications in water purification technologies. However, more research is still needed to determine their practical application in water treatment facilities.

Synergistic potential in spinel ferrite MFe2O4 (M = Co, Ni) nanoparticles-mediated graphene oxide: Structural aspects, photocatalytic, and kinetic studies

The existence of artificial dyes in water is a significant environmental concern, as it can lead to poor water quality. Photodegradation is becoming an increasingly popular method for treating water contaminated with dyes. In this study, the photodegradation of Reactive Red 66 and Reactive Red 120 dyes, as well as textile wastewater, was investigated under UV and visible light irradiation. To enhance the photoresponse of the MFe2O4 (M = Co, Ni) nanoparticles, modifications were made by incorporating graphene oxide. The MFe2O4 nanoparticles and MFe2O4/GO nanocomposite photocatalysts were subjected to several characterization techniques, including FT-IR, Raman spectroscopy, XRD, DRS, zeta potential, VSM, TGA, DSC, BET, SEM, and EDAX analysis. Experiments were conducted to optimize several key parameters involved in the photodegradation process, including pH, photocatalyst dosage, initial dye concentration, and irradiation time. The removal efficiency of Reactive Red 66 and Reactive Red 120 dyes using CoFe2O4 nanoparticles was found to be 86.97 and 82.63%, respectively. Also, the removal percentage of these dyes using CoFe2O4/GO nanocomposite photocatalyst was 95.57 and 90.9% for Reactive Red 66 and Reactive Red 120, respectively. Experiments found that NiFe2O4 nanoparticles removed 90.92% of Reactive Red 66 dye and 84.7% of Reactive Red 120 dye. The NiFe2O4/GO nanocomposite photocatalyst showed even higher removal efficiencies, degrading 97.96% of Reactive Red 66 and 93.44% of Reactive Red 120. After three days of exposure to visible light irradiation, the removal percentage of Reactive Red 66 using MFe2O4 and MFe2O4/GO nanocomposite was investigated.

Low-Temperature Synthesis of Mesoporous Half-Metallic High-Entropy Spinel Oxide Nanofibers for Photocatalytic CO2 Reduction

High-entropy oxides (HEOs) exhibit great prospects owing to their varied composition, chemical adaptability, adjustable light-absorption ability, and strong stability. In this study, we report a strategy to synthesize a series of porous high-entropy spinel oxide (HESO) nanofibers (NFs) at a low temperature of 400 °C by a sol-gel electrospinning technique. The key lies in selecting six acetylacetonate salt precursors with similar coordination abilities, maintaining a high-entropy disordered state during the transformation from stable sols to gel NFs. The as-synthesized HESO NFs of (NiCuMnCoZnFe)3O4 show a high specific surface area of 66.48 m2/g, a diverse elemental composition, a dual bandgap, half-metallicity property, and abundant defects. The diverse elements provide various synergistic catalytic sites, and oxygen vacancies act as active sites for electron-hole separation, while the half-metallicity and dual-bandgap structure offer excellent light absorption ability, thus expanding its applicability to a wide range of photocatalytic processes. As a result, the HESO NFs can efficiently convert CO2 into CH4 and CO with high yields of 8.03 and 15.89 μmol g-1 h-1, respectively, without using photosensitizers or sacrificial agents.

Advancement in nanomaterials for environmental pollutants remediation: a systematic review on bibliometrics analysis, material types, synthesis pathways, and related mechanisms

Environmental pollution is a major issue that requires effective solutions. Nanomaterials (NMs) have emerged as promising candidates for pollution remediation due to their unique properties. This review paper provides a systematic analysis of the potential of NMs for environmental pollution remediation compared to conventional techniques. It elaborates on several aspects, including conventional and advanced techniques for removing pollutants, classification of NMs (organic, inorganic, and composite base). The efficiency of NMs in remediation of pollutants depends on their dispersion and retention, with each type of NM having different advantages and disadvantages. Various synthesis pathways for NMs, including traditional synthesis (chemical and physical) and biological synthesis pathways, mechanisms of reaction for pollutants removal using NMs, such as adsorption, filtration, disinfection, photocatalysis, and oxidation, also are evaluated. Additionally, this review presents suggestions for future investigation strategies to improve the efficacy of NMs in environmental remediation. The research so far provides strong evidence that NMs could effectively remove contaminants and may be valuable assets for various industrial purposes. However, further research and development are necessary to fully realize this potential, such as exploring new synthesis pathways and improving the dispersion and retention of NMs in the environment. Furthermore, there is a need to compare the efficacy of different types of NMs for remediating specific pollutants. Overall, this review highlights the immense potential of NMs for mitigating environmental pollutants and calls for more research in this direction.

Recent advances of modification effect in Co3O4-based catalyst towards highly efficient photocatalysis

Tricobalt tetroxide (Co3O4) has been developed as a promising photocatalyst material for various applications. Several reports have been published on the self-modification of Co3O4 to achieve optimal photocatalytic performance. The pristine Co3O4 alone is inadequate for photocatalysis due to the rapid recombination process of photogenerated (PG) charge carriers. The modification of Co3O4 can be extended through the introduction of doping elements, incorporation of supporting materials, surface functionalization, metal loading, and combination with other photocatalysts. The addition of doping elements and support materials may enhance the photocatalysis process, although these modifications have a slight effect on decreasing the recombination process of PG charge carriers. On the other hand, combining Co3O4 with other semiconductors results in a different PG charge carrier mechanism, leading to a decrease in the recombination process and an increase in photocatalytic activity. Therefore, this work discusses recent modifications of Co3O4 and their effects on its photocatalytic performance. Additionally, the modification effects, such as enhanced surface area, generation of oxygen vacancies, tuning the band gap, and formation of heterojunctions, are reviewed to demonstrate the feasibility of separating PG charge carriers. Finally, the formation and mechanism of these modification effects are also reviewed based on theoretical and experimental approaches to validate their formation and the transfer process of charge carriers.

Optimization of Visible-Light-Driven Ciprofloxacin Degradation Using a Z-Scheme Semiconductor MgFe2O4/UiO-67

A heterogeneous photocatalyst, MgFe2O4/UiO-67 (MU-x), was successfully synthesized by doping magnetic magnesium ferrite nanoparticles (MgFe2O4) with the UiO-67 metal-organic framework at various weight ratios (MgFe2O4: UiO-67 at 30, 50, 70, and 90 wt %). Various techniques, including X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FT-IR) , Brunauer-Emmett-Teller (BET), photoluminescence (PL), vibrating sample magnetometry (VSM), electrochemical impedance spectroscopy (EIS), and ultraviolet-visible diffuse reflectance spectroscopy (UV-vis DRS), were used to characterize the prepared photocatalysts. The photocatalytic performance of MU-x in the degradation of ciprofloxacin (CIP) under visible light was assessed. The CIP degradation efficiency was found to increase as the amount of MgFe2O4 in the composite was increased up to 70 wt %. Experimental conditions were optimized using response surface methodology (RSM) based on central composite design (CCD) with three factors: initial pH, catalyst loading, and CIP concentration. Using the obtained model, the optimal conditions were determined as follows: initial pH of 8.025, catalyst loading of 33.8 wt %, and CIP concentration of 10.8 mg/L. Under these optimal conditions, a notable improvement was achieved, with 99.62% of CIP removal achieved within 90 min, surpassing the performance of previously reported photocatalysts. Total organic carbon (TOC) analysis revealed a high degree of mineralization, at 81.25%. The degradation pathway of CIP was investigated based on liquid chromatography-mass spectrometry (LC-MS) analysis. Finally, the values of ECB and EVB of the photocatalyst were determined and the possible degradation mechanism of CIP was investigated based on Mott-Schottky and the applied scavengers. The hydroxyl radical (•OH) was identified as the dominant species in the removal of CIP through a trapping experiment. The photocatalyst with 70 wt % of MgFe2O4 (MU-70) exhibited excellent stability and recoverability with an external magnet, demonstrating 86.33% CIP removal after four cycles. According to the obtained results, MU-70 is a promising visible-light-active photocatalyst with great potential for water treatment applications and convenient recovery.

Nanocrystalline Ni-Zn spinel ferrites: size-dependent physical, photocatalytic and antioxidant properties

The physical properties of nanomagnetic particles are expected to be highly dependent on their size. In this study, besides the promising applications of nanocrystalline Ni-Zn spinel ferrites in the area of photocatalysis and free radical scavenging, we present a detailed study with appropriate scientific explanations on the role of size change in modifying and tuning the microstructural, optical and magnetic properties. Three nanostructured Zn0.3Ni0.7Fe2O4 samples of different particle sizes were prepared via the chemical co-precipitation method. Crystallographic phase purity and formation of the spinel cubic phase for all the samples were tested by X-ray diffraction studies. The magnetic properties of the as-synthesized ferrite nanoparticles have been examined thoroughly at 5 K and 300 K. Emergence of superparamagnetic behavior has been observed for the sample with the smallest size ferrite nanoparticles (ZNF-1). The photocatalytic efficiency of all the nanocatalysts was tested on methylene blue (MB) dye and the smallest sized nanocatalyst (ZNF-1) was identified as the most efficient catalyst in degrading MB dye under light illumination. The degradation efficiency was found to decrease with increasing mean particle size of the prepared samples. The antioxidant properties of the prepared ferrite samples were also studied. Here, too, the ZNF-1 sample with the smallest sized nanoparticles exhibited maximum scavenging of free radicals compared to other samples. Hence, the present study clearly demonstrates that smaller-sized Ni-Zn spinel ferrites are efficient materials for tuning the physical properties as well as for use in photocatalytic and antioxidant applications.

Nanocomposites Based on Polyethylene and Nickel Ferrite: Preparation, Characterization, and Properties

Composite materials based on NiFe2O4 nanoparticles and polyethylene matrix have been synthesized by thermal decomposition to expand the application area of high-pressure polyethylene by filling it with nanoscale particles. The synthesized compositions were obtained in the form of a dark gray powder and compressed for further study According to TEM, the average particle size in composites was 2, 3, and 4 nm in samples with a filling of 10%, 20% and 30%. The concentration dependences of the specific electrical resistivity ρV, dielectric permittivity ε, saturation magnetization MS and the parameters of reflection and attenuation of microwave power of the obtained composites were investigated. The threshold for percolation in such materials is found to be within a concentration range of 20…30%. The electronic and atomic structure of composites was studied by methods of Mössbauer spectroscopy, X-ray diffraction and X-ray absorption spectroscopy. The closest atomic environment of nickel and iron in nanoparticles is close to that of crystalline NiFe2O4. The dependence of the nanoparticles size as well as the dependence of the number of tetrahedral or octahedral iron positions in nickel ferrite nanoparticles to their content in polyethylene matrix is established. It is shown that composite materials based on NiFe2O4 nanoparticles and polyethylene matrix can be used as components of electromagnetic compatibility systems.

Synthesis of magnetic graphene-like carbon nitride-cobalt ferrite (g-C3N4/CoFe2O4) nanocomposite for sonocatalytic remediation of toxic organic dyes

A novel magnetic g-C₃N₄/CoFe₂O₄ nanocomposite was successfully synthesized by a simple hydrothermal method and applied as a new graphene-like carbon nitride-based sonocatalyst for sonodegradation of pollutant dyes. The as-prepared samples were characterized by using X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), vibrating sample magnetometry (VSM), X-ray photoelectron spectroscopy (XPS), UV-visible diffuse reflectance spectroscopy (DRS), BET surface area measurements and photoluminescence (PL) spectroscopy. The results indicate that the nanocomposite sample is composed of spherical CoFe₂O₄ nanoparticles adhered to g-C₃N₄ naosheets. The g-C₃N₄/CoFe₂O₄ nanocomposites were used as a new magnetically separable sonocatalyst in H₂O₂-assisted sonodegradation of methylene blue (MB), rhodamine B (RhB) and methyl orange (MO) dyes in aqueous media. The results showed complete degradation (ca. 100%) of dyes within short times (30-35 min). The sonocatalytic activity of graphitic carbon nitride (g-C₃N₄) was greatly enhanced with CoFe₂O₄ modification. Trapping experiments indicated that the g-C₃N₄/CoFe₂O₄ nanocomposites serves as a generator of hydroxyl radical (˙OH) via activation of H₂O₂ for degradation of dyes under ultrasound irradiation. Furthermore, the magnetic sonocatalyst can be separated from solution by an external magnet and reused several times without observable loss of activity. The possible mechanism of sonocatalytic activity was also proposed according to experimental results.

Recent advances in spinel ferrite-based magnetic photocatalysts for efficient degradation of organic pollutants

Although spinel ferrite (MFe₂O₄, M = Zn, Ni, Mn, etc.) has been reported as a promising catalyst, its low photocatalytic activity under visible light greatly restricts its practical application. Spinel ferrite-based photocatalytic composites have exhibited improved efficiency for pollutant degradation, due to interface charge carrier mobility and structural modification. Meanwhile, due to its magnetism and stability, spinel ferrite composite can be easily recycled for long-term utilization, showing its high application potential. In this review, the recent advances in the construction and photocatalytic degradation of spinel ferrite composites are discussed, with an emphasis on the relationship between structural property and photocatalytic activity. In addition, to improve their photocatalytic application, the challenges, gaps and future research prospects are proposed.

Electrochemical Sensor for Detection and Degradation Studies of Ethyl Violet Dye

In this work, a simple and sensitive electrochemical method was developed to determine ethyl violet (EV) dye in aqueous systems by using square wave anodic stripping voltammetry (SWASV) employing a glassy carbon electrode modified with acidic-functionalized carbon nanotubes (COOH-fCNTs). In square wave anodic stripping voltammetry, EV exhibited a well-defined oxidation peak at 0.86 V at the modified GCE. Impedance spectroscopy and cyclic voltammetry were used to examine the charge transduction and sensing capabilities of the modified electrode. The influence of pH, deposition potential, and accumulation time on the electro-oxidation of EV was optimized. Under the optimum experimental conditions, the limit of detection with a value of 0.36 nM demonstrates high sensitivity of COOH-fCNTs/GCE for EV. After detection, it was envisioned to devise a method for the efficient removal of EV from an aqueous system. In this regard a photocatalytic degradation method of EV using Ho/TiO₂ nanoparticles was developed. The Ho/TiO₂ nanoparticles synthesized by the sol-gel method were characterized by UV-vis, XRD, FTIR, SEM, and EDX. The photocatalytic degradation studies revealed that basic medium is more suitable for a higher degradation rate of EV than acidic and neutral media. The photodegradation kinetic parameters were evaluated using UV-vis spectroscopic and electrochemical methods. The results revealed that the degradation process of EV follows first-order kinetics.

Halides and oxyhalides-based photocatalysts for abatement of organic water contaminants - An overview

Recently, halides (silver halides, AgX; perosvkite halides, ABX₃) and oxyhalides (bismuth oxyhalides, BiOX) based nanomaterials are noticeable photocatalysts in the degradation of organic water pollutants. Therefore, we review the recent reports to explore improvement strategies adopted in AgX, ABX₃ and BiOX (X = Cl, Br and I)-based photocatalysts in water pollution remediation. Herein, the photocatalytic degradation performances of each type of these photocatalysts were discussed. Strategies such as tailoring the morphology, crystallographic facet exposure, surface area, band structure, and creation of surface defects to improve photocatalytic activities of pure halides and BiOCl photocatalysts are emphasized. Other strategies like metal ion and/or non-metal doping and construction of composites, adopted in these photocatalysts were also reviewed. Furthermore, the way of production of active radicals by these photocatalysts under ultraviolet/visible light source is highlighted. The deciding factors such as structure of pollutant, light sources and other parameters on the photocatalytic performances of these materials were also explored. Based on this literature survey, the need of further research on AgX, ABX₃ and BiOX-based photocatalysts were suggested. This review might be beneficial for researchers who are working in halides and oxyhalides-based photocatalysis for water treatment.

Study of Corrosion Mechanisms in Corrosive Media and Their Influence on the Absorption Capacity of Fe2O3/NdFeO3 Nanocomposites

This paper presents the results of a study of the change in the stability of Fe2O3/NdFeO3 nanocomposites when exposed to aggressive media over a long period of time. The main purpose of these studies is to investigate the mechanisms of degradation and corrosion processes occurring in Fe2O3/NdFeO3 nanocomposites, as well as the influence of the phase composition on the properties and degradation resistance. According to the X-ray phase analysis, it was found that the variation of the initial components leads to the formation of mixed composition nanocomposites with different Fe2O3/NdFeO3 phase ratios. During corrosion tests, it was found that the dominance of the NdFeO3 phase in the composition of nanocomposites leads to a decrease in the degradation and amorphization rate of nanostructures by a factor of 1.5–2 compared to structures in which the Fe2O3 phase dominates. Such a difference in the degradation processes indicates the high stability of two-phase composites. Moreover, in the case of an aqueous medium, nanocomposites dominated by the NdFeO3 phase are practically not subjected to corrosion and deterioration of properties. The results obtained helped to determine the resistance of Fe2O3/NdFeO3 nanocomposites to degradation processes caused by exposure to aggressive media, as well as to determine the mechanisms of property changes in the process of degradation. The results of the study of the absorption capacity of Fe2O3/NdFeO3 nanocomposites in the case of the purification of aqueous media from manganese and arsenic showed that a change in the phase ratio in nanocomposites leads to an increase in the absorption efficiency of pollutants from aqueous media.

Zinc ferrite nanoparticles from industrial waste for Se (IV) elimination from wastewater

The presence of high concentrations of selenium ions in wastewater is considered an environmental problem. However, the mechanism of selenium ions (Se (IV)) removal by the adsorption process has not been investigated in-depth so far. Also, the recovery and conversion of the industrial waste materials into valuable materials is a vital issue. Therefore, in this study, zinc ferrite nanopowders are economically synthesized from steel-making wastes by co-precipitation method for investigating as adsorbents of selenium species. The produced nanopowders were annealed at 150, 300, 500, and 850 °C for 5 h to scrutinize the impact of annealing temperature on their crystallite size. The compositional, optical, and magnetic features of the nanopowders were defined by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM), UV-Vis. spectrophotometer along with vibrating sample magnetometer (VSM). Optical absorbance spectra were found characteristic due to the electronic structure of Fe³⁺ (3d⁵) considering the C_3v local symmetry of Fe³⁺ ions. The prepared nanopowders demonstrated good adsorption capacity toward selenium ions (43.67 mg/g at pH 2.5) from an aqueous medium. Adsorption data were found fitting to Freundlich isotherm model. Thus, ZnFe₂O₄ can be recommended to effectively eliminate selenium ions from aqueous solutions.

Ultrasensitive SERS detection of Rhodamine 6G using a silver enriched MOF-derived CuFe2O4 microcubes substrate

Recently, spinel ferrites have attracted great attention as a SERS-active substrate for the detection of organic contaminants. In this paper, we report the synthesis of silver enriched MOF-derived CuFe₂O₄ (Ag-CFO) composite using a simple MOF template process. The as-synthesized Ag-CFO exhibits an excellent sensitivity towards the detection of Rhodamine 6G dye at the lowest concentration of 10^-14 M. Using noble metal nanoparticles in conjunction with CuFe₂O₄ provides an excellent SERS performance based on the synergistic effect resulting from uniform Ag distribution on the cubic morphology leading to the high electromagnetic effect and chemical mechanism of CuFe₂O₄. Ag-CFO microcubes also demonstrated remarkable recyclability, reproducibility, and chemical stability. Moreover, the substrate showed good sensitivity when it was examined in tap and river water for practical applications. The results confirm that Ag-CFO microcubes substrate has great potential as a reusable material for the rapid detection of environmental pollutants.

A Literature Review of Modelling and Experimental Studies of Water Treatment by Adsorption Processes on Nanomaterials

A significant growth in the future demand for water resources is expected. Hence researchers have focused on finding new technologies to develop water filtration systems by using experimental and simulation methods. These developments were mainly on membrane-based separation technology, and photocatalytic degradation of organic pollutants which play an important role in wastewater treatment by means of adsorption technology. In this work, we provide valuable critical review of the latest experimental and simulation methods on wastewater treatment by adsorption on nanomaterials for the removal of pollutants. First, we review the wastewater treatment processes that were carried out using membranes and nanoparticles. These processes are highlighted and discussed in detail according to the rate of pollutant expulsion, the adsorption capacity, and the effect of adsorption on nanoscale surfaces. Then we review the role of the adsorption process in the photocatalytic degradation of pollutants in wastewater. We summarise the comparison based on decomposition ratios and degradation efficiency of pollutants. Therefore, the present article gives an evidence-based review of the rapid development of experimental and theoretical studies on wastewater treatment by adsorption processes. Lastly, the future direction of adsorption methods on water filtration processes is indicated.

Synthesis of Iron Gallate (FeGa2O4) Nanoparticles by Mechanochemical Method

The study was focused on optimizing the procedure of synthesizing iron gallate (FeGa2O4) nanoparticles by mechanochemical techniques. Due to a lack of information in the literature about the sequence of synthesis procedures of FeGa2O4 structures, the study is based on the establishment of a recipe for FeGa2O4 synthesis using mechanochemical techniques. Rotation speed, grinding media, and milling durations were the optimized parameters. At the end of each step, the structure of the resulting samples was investigated using the X-ray diffraction (XRD) patterns of samples. At the end of the processes, the XRD patterns of the samples milled under an air atmosphere were coherent with the XRD pattern of the FeGa2O4 structure. XRD patterns were analyzed employing Rietveld refinements to determine lattice parameters under the assumption of an inverse spinel crystal formation. Furthermore, a fluctuation at band gap values in the range of 2.39 to 2.55 eV was realized and associated with the excess Fe atoms in the lattice, which settled as defects in the crystal structures.

Critical review of perovskite-based materials in advanced oxidation system for wastewater treatment: Design, applications and mechanisms

Perovskite has been widely concerned in the field of modern environmental catalysis due to its low price, high stability, excellent catalytic activity, diverse structure and strong conversion adaptability. In recent years, people have been working on the coupling of perovskite catalysts and advanced oxidation processes (AOPs) on the removal of organic pollutants from wastewater. In this review, we classified perovskites of different designs and summarized the application and basic reaction mechanisms of each perovskite in different AOPs. This review helps scientists selecting and designing more effective perovskite catalysts for AOPs by summarizing the applications and reaction mechanisms of perovskite in AOPs. At the end of the review, the challenges and future directions of perovskite in removing organic pollutants from wastewater are discussed.

A review on self-modification of zirconium dioxide nanocatalysts with enhanced visible-light-driven photodegradation of organic pollutants

Over the past few years, photocatalysis is one of the most promising approaches for removing organic pollutants. Zirconium dioxide (ZrO₂) has been shown to be effective in the photodegradation of organic pollutants. However, low photoresponse and fast electron-hole recombination of ZrO₂ affected the efficiency of catalytic performance. Modifying the photocatalyst itself (self-modification) is a prominent way to enhance the photoactivity of ZrO₂. Moreover, as ZrO₂-like photocatalysts have a large bandgap, improving the spectral response via self-modification could extend the visible light region and reduce the chance of recombination. Here, we review the self-modification of ZrO₂ for enhanced the degradation of organic pollutants. The approaches of the ZrO₂ self-modification, including the type of synthetic route and synthesis parameter variation, are discussed in the review. This will be followed by a brief section on the effect of ZrO₂ self-modification in terms of morphology, crystal structure, and surface defects for enhanced photodegradation efficiency. It also covers the discussion on the photocatalytic mechanism of ZrO₂ self-modification. Finally, some challenges with ZrO₂ catalysts are also discussed to promote new ideas to improve photocatalytic performance.

Adsorptive removal of pollutants from water using magnesium ferrite nanoadsorbent: a promising future material for water purification

Nanoadsorbents having large specific surface area, high pore volume with tunable pore size, affordability and easy magnetic separation gained much popularity in recent time. Iron-based nanoadsorbents showed higher adsorption capacity for different pollutant removal from water among other periodic elements. Spinel ferrite nanomaterials among iron-bearing adsorbent class performed better than single iron oxide and hydroxides due to their large surface area, mesoporous pore, high pore volume and stability. This work aimed at focusing on water treatment using magnesium ferrite (MgFe₂O₄) nanomaterials. Synthesis routes, properties and pollutant adsorption were critically investigated to explore the performance of magnesium ferrite in water treatment. Structural and surface properties were greatly affected by the factors involved in different synthesis routes and iron and magnesium ratio. Complete removal of pollutants through adsorption was achieved using magnesium ferrite. Pollutant adsorption capacity of MgFe₂O₄ and its modified forms was found several folds higher than Fe₂O₃ and Fe₃O₄ nanomaterials. In addition, MgFe₂O₄ showed strong stability in water than other pure iron oxide and hydroxide. Modification with graphene oxide, activated carbon, biochar and silica was demonstrated to be beneficial for enhanced adsorption capacity. Complex formation was suggested as a dominant mechanism for pollutant adsorption. These nanomaterials could be a viable and competitive adsorbent for diverse pollutant removal from water.

Stable and Efficient Photoinduced Charge Transfer of MnFe2O4/Polyaniline Photoelectrode in Highly Acidic Solution

Tailoring conductive polymers with inorganic photocatalysts, which provide photoinduced electron-hole generation, have significantly enhanced composites leading to excellent photoelectrodes. In this work, MnFe2O4 nanoparticles prepared by a hydrothermal method were combined with polyaniline to prepare mixed (hybrid) slurries, which were cast onto flexible FTO to prepare photoelectrodes. The resulting photoelectrodes were characterized by XRD, FESEM, HRTEM and UV-VIS. The photoelectrochemical performance was investigated by linear sweep voltammetry and chronoamperometry. The photocurrent achieved by MnFe2O4/Polyaniline was 400 μA/cm2 at 0.8 V vs. Ag/AgCl in Na2SO4 (pH = 2) at 100 mW/cm2, while polyaniline alone achieved only 25 μA/cm2 under the same conditions. The best MnFe2O4/Polyaniline displayed an incident photon-to-current conversion efficiency (IPCE) and applied bias photon-to-current efficiency (ABPE) of 60% at 405 nm wavelength, and 0.17% at 0.8 V vs. Ag/AgCl, respectively. High and stable photoelectrochemical performance was achieved for more than 900 s in an acidic environment.

Removal of Organic Dyes from Water and Wastewater Using Magnetic Ferrite-Based Titanium Oxide and Zinc Oxide Nanocomposites: A Review

Heterogeneous photocatalysis using titanium dioxide (TiO2) and zinc oxide (ZnO) has been widely studied in various applications, including organic pollutant remediation in aqueous systems. The popularity of these materials is based on their high photocatalytic activity, strong photosensitivity, and relatively low cost. However, their commercial application has been limited by their wide bandgaps, inability to absorb visible light, fast electron/hole recombination, and limited recyclability since the nanomaterial is difficult to recover. Researchers have developed several strategies to overcome these limitations. Chief amongst these is the coupling of different semi-conductor materials to produce heterojunction nanocomposite materials, which are both visible-light-active and easily recoverable. This review focuses on the advances made in the development of magnetic ferrite-based titanium oxide and zinc oxide nanocomposites. The physical and magnetic properties of the most widely used ferrite compounds are discussed. The spinel structured material had superior catalytic and magnetic performance when coupled to TiO2 and ZnO. An assessment of the range of synthesis methods is also presented. A comprehensive review of the photocatalytic degradation of various priority organic pollutants using the ferrite-based nanocomposites revealed that degradation efficiency and magnetic recovery potential are dependent on factors such as the chemical composition of the heterojunction material, synthesis method, irradiation source, and structure of pollutant. It should be noted that very few studies have gone beyond the degradation efficiency studies. Very little information is available on the extent of mineralization and the subsequent formation of intermediate compounds when these composite catalysts are used. Additionally, potential degradation mechanisms have not been adequately reported.

Emerging novel polymeric adsorbents for removing dyes from wastewater: A comprehensive review and comparison with other adsorbents

Dye molecules are one of the most hazardous compounds for human and animal health and the excess intake of these materials can create toxic impacts. Several studies show the practicality of the adsorption process for dye uptake from wastewaters. In recent years, various adsorbents were used to be efficient in this process. Among all, polymeric adsorbents demonstrate great applicability in different environmental conditions and attract many researchers to work on them, although there is not enough reliable and precise information regarding these adsorbents. This study aims to investigate some influential parameters such as their type, physical properties, experimental conditions, their capacity, and further modeling along with a comparison with non-polymeric adsorbents. The influence of the main factors of adsorption capacity was studied and the dominant mechanism is explained extensively.

Advanced Photocatalysts Based on Conducting Polymer/Metal Oxide Composites for Environmental Applications

Photocatalysts provide a sustainable method of treating organic pollutants in wastewater and converting greenhouse gases. Many studies have been published on this topic in recent years, which signifies the great interest and attention that this topic inspires in the community, as well as in scientists. Composite photocatalysts based on conducting polymers and metal oxides have emerged as novel and promising photoactive materials. It has been demonstrated that conducting polymers can substantially improve the photocatalytic efficiency of metal oxides owing to their superior photocatalytic activities, high conductivities, and unique electrochemical and optical properties. Consequently, conducting polymer/metal oxide composites exhibit a high photoresponse and possess a higher surface area allowing for visible light absorption, low recombination of charge carriers, and high photocatalytic performance. Herein, we provide an overview of recent advances in the development of conducting polymer/metal oxide composite photocatalysts for organic pollutant degradation and CO2 conversion through photocatalytic processes.

Adsorptional-photocatalytic removal of fast sulphon black dye by using chitin-cl-poly(itaconic acid-co-acrylamide)/zirconium tungstate nanocomposite hydrogel

In the present work, the removal of fast sulphon black (FSB) dye from water was executed by using chitin-cl-poly(itaconic acid-co-acrylamide)/zirconium tungstate nanocomposite hydrogel (Ch-cl-poly(IA-co-AAm)-ZrW NCH). The Ch-cl-poly(IA-co-AAm)-ZrW NCH was fabricated proficiently by microwave-induced sol-gel/copolymrization method. The zirconium tungstate (ZrW) photocatalyst was prepared by co-precipitation method using sodium tungstate and zirconium oxychloride in ratio (2:1). The polymeric hydrogel part has been used to support the ZrW, and it acted as an adsorbent for adsorptive removal of FSB dye. The band gap for nanocomposite hydrogel was found about 4.18 eV by using Tauc equation. The Ch-cl-poly(IA-co-AAm)-ZrW NCH was characterized by various techniques as FTIR (Fourier-transform infrared spectroscopy), X-ray diffraction (XRD), transmittance electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS) and scanning electron microscopy (SEM). The adsorptional-photocatalytic remediation experiment of FSB dye was optimized for reaction parameters as FSB dye and Ch-cl-poly(IA-co-AAm)-ZrW NCH concentration, and pH. The maximum percentage removal for FSB dye was observed at 92.66% in 120 min under adsorptional-photocatalysis condition.

Investigation of EG-Bi2S3 nanorods photocatalytic activity under visible light for dye degradation from aquatic system

Bi₂S₃, 5 ml EG-Bi₂S₃, and 10 ml EG-Bi₂S₃ were synthesized by employing solvothermal route. X-ray diffraction, UV-vis absorption, photoluminescence, Raman, scanning electron microscopic studies confirmed the structural, optical, morphological behaviors. The XRD pattern of Bi₂S₃, 5 ml EG-Bi₂S₃, and 10 ml EG-Bi₂S₃ was correlated well with JCPDS # 65-2435. The crystallite size was found to be 57, 49, and 40 nm. The photoluminescence spectra showed semiconducting property of prepared Bi₂S₃, 5 ml EG-Bi₂S₃, and 10 ml EG-Bi₂S₃. The absorption spectra of Bi₂S₃, 5 ml EG-Bi₂S₃, and 10 ml EG-Bi₂S₃ nanorods were well matched with the spectra of a previous report. The bandgap values of Bi₂S₃, 5 ml EG-Bi₂S₃, and 10 ml EG-Bi₂S₃ were calculated to be 1.56, 1.45, and 1.3 eV in reducing order. The morphology of Bi₂S₃, 5 ml EG-Bi₂S₃, and 10 ml EG-Bi₂S₃ samples showed the development of nanorods. The 10 ml EG-Bi₂S₃ sample showed better development of nanorods with the addition of ethylene glycol. The agglomeration was considerably reduced with the mixing of solvent. Bi₂S₃, 5 ml EG-Bi₂S₃, and 10 ml EG-Bi₂S₃ catalysts were added to the methylene blue dye solution and its photocatalytic properties were investigated by reducing toxic pollutants under light. The 10 ml EG-Bi₂S₃ sample with neutral pH and 0.1 g of catalyst was added and investigated which showed 86% of efficiency towards dye degradation. The narrow bandgap, defined morphology of 10 ml EG-Bi₂S₃, made a positive result towards efficient photocatalytic activity.