Rational design of built-in stannic oxide-copper manganate microrods p-n heterojunction for photoelectrochemical sensing of tetracycline

UV-Vis-NIR Broadband Self-Powered CuInS2/SnO2 Photodetectors and the Application in Encrypted Optical Communication

Photodetectors (PDs) with broadband photoresponse can meet the demand for multiband detection in complex environments, overcoming the technological complexity issue of integrated narrow-band PDs. Self-powered heterojunction PDs having ultraviolet-visible-near-infrared broadband photoresponse were constructed by using SnO2 nanopillars and CuInS2 nanoflakes. The dimension, crystalline quality, and energy level structure of the SnO2 nanopillars were regulated by changing the concentration of Sn ions in the precursor solution. The optimized interfacial energy band structure of the heterojunction can increase the transfer ability of the photogenerated carrier. The optimum performance is achieved for the CuInS2/SnO2(0.025M) PD prepared at 0.025 M Sn ion concentration in the precursor solution with the responsivities of 1.15, 6.13, and 1.02 mA/W, and detectivities of 1.19 × 1010, 6.35 × 1010, and 1.02 × 1010 Jones under 254 nm solar-blind ultraviolet light, 475 nm visible light, and 940 nm near-infrared light. Furthermore, a proof-of-concept solar-blind ultraviolet-visible-near-infrared encrypted communication system utilizing a broadband self-powered CuInS2/SnO2 PD as the receiving terminal and solar-blind ultraviolet light, ultraviolet light, visible light, and near-infrared light as the carrier and encryption protocol is proposed. The PD has great potential for applications in the field of encrypted optical communication.

Dual-Signal Mode Ratiometric Photoelectrochemical Sensor Based on G-Quadruplex Hole Transport for Rapid and Sensitive Detection of miRNA-210

For rapid and sensitive detection of miRNA-210, which is important for improving the reliability of clinical diagnosis of breast cancer, a dual-signal mode ratiometric photoelectrochemical (PEC) sensor based on a Au/GaN photoanode is proposed. First, a DNA probe was designed that could complement the target miRNA-210. Then, another G-rich DNA sequence was designed to mismatch the probe and form a double-stranded DNA (dsDNA). Upon addition of the target, the dsDNA unwinds from its binding site and releases G-rich single-stranded DNA. In the presence of Mg2+ and K+, this single-stranded DNA molecule spontaneously forms a G-quadruplex structure, facilitating the rapid transport of photogenerated holes, thereby increasing the photocurrent response of Au/GaN and enabling sensitive label-free detection of miRNA-210. By control of different pH values, a response signal was generated at pH 8, while a reference signal was produced at pH 5. The designed PEC system shows a high potential for the development of miRNA-210 detection. Ultimately, the response signal-to-reference signal ratio was used as the variable, and a broad linear span ranging from 10 fM to 1 nM (R2 = 0.993) has been exhibited, with a detection threshold of 3 fM (S/N = 3). The designed PEC platform shows potential for the development of other disease markers.

Signal Modulation of Organic Photoelectrochemical Transistor by a Z-Scheme Photocathodic Gate: An Innovative Dual Amplification Strategy for Sensitive Aptasensing Application

Pursuing a more efficient signal amplification strategy is highly demanded for improving the performance of the promising cathodic photoelectrochemical (PEC) sensors. In this work, we present an extremely effective dual signal amplification strategy by the integration of a Z-scheme nanohybrids-based photocathode with the effective signal modulation of an organic photoelectrochemical transistor (OPECT) device. Specifically, photocathodic gate material of CdTe-BiOBr nanohybrids with a Z-scheme electron-transfer route was designed and synthesized for preliminary improvement of the activity of the photogate; afterward, signal modulation of the OPECT system by the photocathodic gate of CdTe-BiOBr was then accomplished for further signal amplification by 2 orders of magnitude. As a result, the output PEC signal of CdTe-BiOBr was enhanced by 17.5-fold as compared to BiOBr, and the channel current (IDS) of the OPECT device was 117-fold magnified than its gate current (IG) response. Exemplified by tetracycline (TC) as a model target and aptamer as the specific recognition element, a versatile cathodic aptasensing platform was constructed based on the proposed OPECT device. The introduced OPECT aptasensor merits advantages, including a good linear range (1.0 × 10-12 to 1.0 × 10-6 M), a low limit of detection (4.2 × 10-13 M), and superior sensitivity than the traditional PEC methods for TC detection, which represents a universal protocol for developing the innovative photocathodic OPECT sensing platform toward accurate analysis.

Light-Mediated Modulation of Enzyme-Mimetic Activity of CuMnO2 Nanosheets

As typical copper-based-manganese delafossites, CuMnO₂ nanoflakes (CuMnO₂ NFs) display excellent light absorption capacity, showing great promise for facile regulation of catalysis reactions by light stimulation. Here, we report that the as-prepared CuMnO₂ NFs possess intrinsic peroxidase- and oxidase-like activities, which are capable of catalyzing the oxidation of the enzymatic substrate 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H₂O₂ or O₂, respectively. Additionally, CuMnO₂ NFs exhibit significant light-enhanced dual enzyme-like performance (peroxidase and oxidase) for accelerating the oxidation of TMB, owing to a much greater light-induced reactive oxygen species (ROS) yield. The light-induced hydroxyl radicals (·OH) and superoxide radicals (O₂^•-) hold the key to rapidly catalyzing the oxidation of TMB into the two-electron charge transfer complex diamine, subsequently improving the oxidation capacity and enzyme-like activity of CuMnO₂ NFs as peroxidase and oxidase mimics. These findings confirm an efficient way to improve the enzyme-like performance of nanozymes and regulate the reactive oxygen species (ROS) level by simply employing irradiated light. This work also provides a general method for constructing external field-modulated smart nanozymes and an insightful approach to the corresponding enzyme-mimetic reaction mechanism.

Fabrication of a UV Photodetector Based on n-TiO2/p-CuMnO2 Heterostructures

The heterojunction based on n-TiO2 nanolayer/p-CuMnO2 thin film was achieved using an efficient two-step synthesis process for the fabrication of a UV photodetector. The first step consisted of obtaining the TiO2 nanolayer, which was grown on titan foil by thermal oxidation (Ti-TiO2). The second step consisted of CuMnO2 thin film deposition onto the surface of Ti-TiO2 using the Doctor Blade method. Techniques such as X-ray diffraction, UV-VIS analysis, SEM, and AFM morphologies were used for the investigation of the structural and morphological characteristics of the as-synthesized heterostructures. The Mott–Schottky analysis was performed in order to prove the n-TiO2/p-CuMnO2 junction. The I-V measurements of the n-TiO2 nanolayer/p-CuMnO2 thin film heterostructure confirm its diode characteristics under dark state, UV and visible illumination conditions. The obtained heterojunction, which is based on two types of semiconductors with different energy band structures, improves the separating results of charges, which is very important for high-performance UV photodetectors.

Facile and Sensitive Detection of Nitrogen-Containing Organic Bases with Near Infrared C-Dots Derived Assays

In this article, we have designed both colorimetric (including solution and test paper type) and spectral sensors (including UV-vis and PL type) for the quick and sensitive detection of general nitrogen-containing organic bases (NCOBs); the limit of detection could reach as low as 0.50 nM. NCOBs included 11 examples, covering aliphatic and aromatic amines, five- and six-membered heterocyclics, fused-ring heterocyclics, amino acids, and antibiotics. Furthermore, the assays demonstrated high reliability in sensing NCOBs and excellent ability to distinguish NCOBs from oxygen and sulfur containing organics. The assays developed could find important applications for the detection of NCOBs in the fields of biomedicine, chemistry, and agriculture.

Recent advances in biosensors for antibiotic detection: Selectivity and signal amplification with nanomaterials

Antibiotics are widely used in the prevention and treatment of infectious diseases in animals due to its bactericidal or bacteriostatic action. Residual antibiotics and their metabolites pose great threats to human and animal health, such as potential carcinogenic and mutagenic effects, and bacterial resistances. Therefore, it is necessary and urgent to accurately monitor trace amounts of antibiotics in food samples. Up to now, many analytical methods have been reported for the determination of antibiotics. Biosensors with the advantages of high sensitivity, rapid response, easy miniaturization, and low price have been widely applied to the detection of antibiotics residues in past decades. This review offered an in-depth evaluation of recognition elements for antibiotic residues in diverse food matrices. In addition, it presented a systematical and critical review on signal amplification via various materials, focusing on recently developed nanomaterials. Finally, the review provided an outlook on the future concepts to help upgrade the sensing techniques for antibiotics in food.