Exposure of street sweepers to cadmium, lead, and arsenic in dust based on variable exposure duration in zinc smelting district, Northeast China

Pollution levels and probability risk assessment of potential toxic elements in soil of Pb-Zn smelting areas

Soil pollution around Pb-Zn smelters has attracted widespread attention around the world. In this study, we compiled a database of eight potentially toxic elements (PTEs) Pb, Zn, Cd, As, Cr, Ni, Cu, and Mn in the soil of Pb-Zn smelting areas by screening the published research papers from 2000 to 2023. The pollution assessment and risk screening of eight PTEs were carried out by geo-accumulation index (Igeo), potential ecological risk index (PERI) and health risk assessment model, and Monte Carlo simulation employed to further evaluate the probabilistic health risks. The results suggested that the mean values of the eight PTEs all exceeded the corresponding values in the upper crust, and more than 60% of the study sites had serious Pb and Cd pollution (Igeo > 4), with Brazil, Belgium, China, France and Slovenia having higher levels of pollution than other regions. Besides, PTEs in smelting area caused serious ecological risk (PERI = 10912.12), in which Cd was the main contributor to PREI (86.02%). The average hazard index (HI) of the eight PTEs for adults and children was 7.19 and 9.73, respectively, and the average value of total carcinogenic risk (TCR) was 4.20 × 10-3 and 8.05 × 10-4, respectively. Pb and As are the main contributors to non-carcinogenic risk, while Cu and As are the main contributors to carcinogenic risk. The probability of non-carcinogenic risk in adults and children was 84.05% and 97.57%, while carcinogenic risk was 92.56% and 79.73%, respectively. In summary, there are high ecological and health risks of PTEs in the soil of Pb-Zn smelting areas, and Pb, Cd, As and Cu are the key elements that cause contamination and risk, which need to be paid attention to and controlled. This study is expected to provide guidance for soil remediation in Pb-Zn smelting areas.

Ecological and human health hazards of soil heavy metals after wildfire: A case study of Liangshan Yi autonomous prefecture, China

Soil samples were collected in at different depths from the conflagration area in Liangshan Yi Autonomous Region, China, to investigate the distribution characteristics and ecological and human health risks of heavy metals after a wildfire. The samples collected comprise wildfire ash (WA) above the soil surface, ash soil (AS) 0-5 cm, and plain soil (PS) 5-15 cm below the soil surface. Additionally, reference soil (RS) was collected from a nearby unburned area at the same latitude as the conflagration area. The results showed that the concentrations of zinc (Zn), copper (Cu), lead (Pb), and cadmium (Cd) in the WA and AS were significantly higher than in reference soil (RS) (p < 0.05). Concentrations of Pb in the PS were 2.52 times higher than that in RS (17.9 mg kg-1) (p < 0.05). The AS and WA had the highest Index of potential ecological risks (RI > 600). In addition, The Cd in AS and WA contributed the most to the highest Improved nemerow index (INI) and RI with a contribution of more than 80%. The concentration of heavy metals was used to establish non-carcinogenic effects and cancer risks in humans via three exposure pathways: accident ingestion of soil, dermal contact with soil, and inhalation of soil particles. Hazard index (HI) values of each sample were all less than 1, indicating the non-carcinogenic risk was within the acceptable range and would not adversely affect the local population's health. The Cancer risk (CR) values of Cr, As, Cd, and Ni were all below 1 × 10-6, indicating that heavy metal pollution from this wildfire did not pose a cancer risk to residents.

Comprehensive assessment of phthalates in indoor dust across China between 2007 and 2019: Benefits from regulatory restrictions

China is the largest producer and consumer of phthalates in the world. However, it remains unclear whether China's phthalate restrictions have alleviated indoor phthalate pollution. We extracted the concentrations of dimethyl phthalate (DMP), diethyl phthalate (DEP), dibutyl phthalate (DBP), diisobutyl phthalate (DIBP), benzyl butyl phthalate (BBP), and bis(2-ethylhexyl) phthalate (DEHP) in indoor dust at 2762 sites throughout China between 2007 and 2019 from the published literature. Based on these data, we investigated the effects of phthalate restrictions and environmental factors on the temporal-spatial distribution and sources of phthalates and estimated human exposure and risk of phthalates. The results revealed that the mean concentrations of phthalates in indoor dust throughout China decreased in the following order: DEHP > DBP > DIBP > DMP > DEP > BBP. The concentrations of six phthalates were generally higher in northern and central-western China than in southern regions. BBP and DEHP concentrations decreased by 73.5% and 17.9%, respectively, from 2007 to 2019. Sunshine was a critical environmental factor in reducing phthalate levels in indoor dust. Polyvinyl chloride materials, personal care products, building materials, and furniture were the primary sources of phthalates in indoor dust. The phthalates in indoor dust posed the most significant threat to children and older adults. This study provides a picture of phthalate pollution, thus supporting timely and effective policies and legislation.

Estimate of the maximum amount of dust adhering to skin and the upper limit of dust-skin adherence factor for young adults: An example from Changchun, China

Contaminants present in dust adhering to the skin can pose a significant risk to human health through dermal absorption and hand-to-mouth contact. The adhesion capacity of dust differs significantly from that of soil due to its physicochemical properties. Therefore, applying the raw soil exposure parameters to estimate the health risks associated with dermal exposure to dust may lead to erroneous conclusions. In this study, we quantified the maximum amount of dust that adhered to the skin (MADmax) and the upper limit of dust-skin adherence factor (DSAFmax) in 26 adults using element markers as a proxy for dust. The volunteers were exposed to dust and rinse water samples were collected from their hands, forearms, lower legs, and feet. We analyzed both the raw dust samples and the rinse water samples for 11 element markers, including Be, V, Cr, Mn, Co, Ni, Cu, Zn, Se, Ba, and Pb. The results showed that the MADmax of indoor dust and outdoor dust increased by 0.08-0.62 mg and 0.33-0.56 mg following a 1 cm2 increase in skin surface area, respectively. Based on best dust element markers, the body part-weighted dust-skin adherences (WDSAFmaxs) of indoor dust and outdoor dust were 0.35 and 0.64 mg/cm2, respectively. A smaller particle size and higher moisture content resulted in a larger DSAFmax. Only when indoor dust concentrations exceed 24.2 mg/m3 or outdoor dust concentrations exceed 44.3 mg/m3, can the WDSAFmax be applied directly in the health risk assessment of dermal exposure to dust. The method from this study can be re-applied in different regions, and the adherence data can help to improve future studies on the health effects of dermal exposure to dust.

New insights into health risk assessment on soil trace metal(loid)s: Model improvement and parameter optimization

Trace metal(loid)s (TMs) in soils may pose potential health risks to humans. Due to model uncertainty and variability of exposure parameters, the traditional health risk assessment (HRA) model may lead to inaccurate risk assessment results. Therefore, this study developed an improved HRA model to assess health risks by combining two-dimensional Monte Carlo simulation (2-D MCS) with a Logistic Chaotic sequence based on published data from 2000 to 2021. The results showed children and adult females were the high-risks populations for Non-carcinogenic risk and Carcinogenic risk, respectively. Meanwhile, children's Ingestion rate (IngR < 160.233 mg/day) and adult females' Skin adherence factor (0.026 mg/(cm2•d) < AF < 0.263 mg/(cm2•d)) were used as recommended exposure to make the health risk within acceptable range. Additionally, when performing risk assessment using actual exposure parameters, priority control TMs were identified, with As being the priority control TM for Southwest China and Inner Mongolia, whereas Cr and Pb for Tibet and Yunnan, respectively. Compared to health risk assessment, improved models increased risk assessment accuracy and provided recommended exposure parameter for high-risk populations. This study will provide new insights for soil-related health risk assessment.

A review on toxic metal pollution and source-oriented risk apportionment in road dust of a highly polluted megacity in Bangladesh

Heavy metal enrichment in road dust has resulted from intensive anthropogenic activity, particularly urbanization, industrial activities and traffic emission, posing a hazard to urban ecosystems and human health. To promote optimal road dust management in urban environments, it is necessary to assess the possible ecological and health impact of toxic elements in road dust. In a heavily populated megacity like Dhaka, Bangladesh, large-scale risk assessments of contamination in road dust with heavy metals are limited. The present study aims at presenting a concentration of twenty-five metals in road dust (Na, K, Cs, Rb, Mg, Ca, Sr, Ba, Al, Zn, Cd, Pb, As, Sb, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zr and W) in Dhaka megacity. We used a critical source-based positive matrix factorization model, source-oriented potential ecological risks and health risks. Out of the studied metals, Na, Ca, Zn, Cd, Cu, Zr and W exceeded the shale value. About 73%, 48%, 29% and 32% of sampling sites showed a higher level of pollution based on PLI, NIPI, PER and NIRI, respectively. PMF model identified that Cd (85.3%), Cr (62.4%), Ni (58.2%), Zn (81.8%) and Mn (65.9%) in road dust were primarily attributed to traffic emission, fuel combustion, metal processing, transport sources and natural sources, respectively. Fuel combustion and metal processing posed considerable and high risks based on modified potential ecological risk and NIRI. Based on health hazards, traffic emission posed a high cancer risk in adult males (29%), whereas transport sources contributed to females (21%) and children (23%).

Overall distribution of tire-wear particles, nano‑carbon black, and heavy metals in size-fractionated road dust collected from steel industrial complexes

Tire-wear particles (TWP) from vehicles serves as a non-exhaust emission source. The mass content of metallic species in road dust may increase owing to the traffic of heavy vehicles and industrial activity; consequently, metallic particles are also present in road dust. Herein, road dust collected from steel industrial complexes with high traffic of high-weight vehicles and the composition distribution of five size-fractioned particle sizes were analyzed. Road dust samples were collected from three areas near steelmaking complexes. The mass distribution of TWP, carbon black (CB), bituminous coal, and heavy metals (Fe, Zn, Mn, Pb, Ni, As, Cu, Cd, and Hg) in different size fractions of road dust was quantified by combining four different analytical techniques. In the magnetic separation for <45 μm fraction, 34.4 wt% and 50.9 wt% was removed for steelmaking and steel-related industrial complexes, respectively. As the particle size decreased, the mass content of Fe, Mn, and TWP increased. The enrichment factors of Mn, Zn, and Ni were higher than two, indicating that they were related to industrial activities in steel complexes. The maximum concentrations of TWP and CB originating from the vehicle varied depending on the region and particle size range: TWP 2.066 wt% at 45-75 μm (industrial complex) and CB 5.559 wt% at 75-160 μm (steel complex). Coal was only found in the steel complex. Finally, to reduce the exposure of the finest particles to road dust, three methods were suggested. Magnetic fraction must be removed from road dust using magnetic separation; the fly dust of coal during transportation must be suppressed, and covers must be used in coal yards; the mass contents of TWP and CB in road dust should be removed by vacuum cleaning instead of water flushing.

Occurrence, potential release and health risks of heavy metals in popular take-out food containers from China

Global consumption of take-out food increased rapidly and the chemicals in their containers become a potential source of human exposure. However, available information on heavy metals in the containers is extremely limited and the associated health risks remain poorly understood. We investigated Cd, Cr, Pb, Sb, Mn, Ni and Co in the popular take-out food containers from China and found the concentrations of these metals were moderate in comparison to the concentrations reported in other food contact materials. The metal concentrations in sampled containers by material type differed significantly, and higher concentrations of Cd, Pb, Sb, Mn and Co were observed in expanded polystyrene samples. The metals in the containers likely originated from intentional addition and/or contamination of materials. The potential release of the metals from containers was simulated and found the median leaching rates of Cd, Pb, Sb, Ni and Co in the range of 0.36-4.80% under typical conditions, which depended largely on the material types. Based on the observed leaching rates, we estimated that the summed carcinogenic risks of Cd, Pb, Ni and Co were unacceptable under specific exposure frequency, although the total non-carcinogenic risks from metal intake were low.

High lead level in the Alps in XIXth century, learning from the analysis of 138 historical hair stands

Analysis of hair is known to provide useful information about environmental and toxic exposures. Very little historical use has been made of this type of investigation. Here we study 138 human hair samples from 19th century in France. In order to examine the potential association between contamination and historical health impacts, we characterized contamination by 33 elements in a set of hair strands sampled during the last quarter of the 19th century in the Savoy region of France. After a selected washing step on 138 hair strands conserved at the Museum National d'Histoire Naturelle in Paris (France), we assessed the presence of inorganics by ICP/MS, and lead level was higher than values reported in literature. We then compared concentrations and distributions between women and men, sampling locations and crossing gender and geographical origin. Hair lead level was high throughout Savoy at the end of the 19th century: significantly higher for people living in towns or industrial valleys, and lower for those of countryside and mountains areas. Environmental and economic changes (industrialization and urbanization with water adduction and leaded paints), living habits (kitchenware, cosmetics, wine, and tobacco), and local features (mines exploitation, railroad development, and industrialized narrow valleys) could be envisaged for explaining the level of lead contamination. In the same period, the two main industrial valleys of Savoy (Maurienne and Tarentaise) had high rates of endemic goiter and cretinism and among the highest hair lead levels. Other lines of evidence will need to be explore to investigate a possible link between historical Pb exposure and goiter in the study area.