Development of a new needle trap-based method for the determination of some volatile organic compounds in the indoor environment

Needle trap device technique: From fabrication to sampling

Needle Trap Device (NTD) as a novel, versatile, and eco-friendly technique has played an important role in analytical and environmental chemistry. The distinctive role of this interdisciplinary technique can be defended through the sampling and analysis of biological samples and industrial pollutants in gaseous and liquid environments. In recent years, significant efforts have been made to enhance the performance of the needle trap device resulting in the development of novel extraction routes by various packing materials with improved selectivity and enhanced adsorption characteristics. These achievements can lead to the facilitated pre-concentration of desired analytes. This review tries to have a comparative and comprehensive survey of the three important areas of NTD technique: I) Fabrication and preparation procedures of NTDs; II) Sampling techniques of pollutants using NTDs; and III) Employed materials as adsorbents in NTDs. In the packing-material section, the commercial and synthetic adsorbents such as carbon materials, metal-organic frameworks, aerogel, and polymers are considered. Furthermore, the limitations and potential areas for future development of the NTD technique are presented.

Development of a needle trap device packed with modified PAF-6-MNPs for sampling and analysis of polycyclic aromatic compounds in air

The aim of this study was to develop a new method for sampling and analyzing polycyclic aromatic hydrocarbons in the air. This was achieved by utilizing a needle trap device packed with a modified porous aromatic framework coated with magnetic nanoparticles (PAF-6-MNPs). The modified adsorbent underwent qualitative evaluation using Fourier-transform infrared spectroscopy and X-ray diffraction, as well as scanning and transmission electron microscopy. The optimal conditions for sampling polycyclic aromatic hydrocarbons compounds were determined using a dynamic atmosphere chamber. The method was validated by taking various samples from the standard chamber, and then analyzed under different environmental sampling conditions using a gas chromatography device. The limit of detection (LOD) and limit of quantification (LOQ) values for the analytes of interest, including naphthalene, anthracene, and pyrene, ranged from 0.0034-0.0051 and 0.010-0.015 μg L-1, respectively. Also, the repeatability and reproducibility of the method expressed as relative standard deviation, for the mentioned analyses were found to be in the range of 17.8-20.5% and 20-22.9%. The results indicated that over a 20 day storage period (with the needle trap device containing the analytes of interest kept in the refrigerator), there was no significant decrease in the amount of analytes compared to the initial amount. These findings suggest that, the needle trap packed with the proposed adsorbent offers a reliable, highly-sensitive, easy-to-use, and cost-effective method for sampling polycyclic aromatic hydrocarbons in the air compared to the conventional method recommended by the National Institute of Occupational Safety and Health (NIOSH), method 5515.

MOF-801 based solid phase microextraction fiber for the monitoring of indoor BTEX pollution

Benzene, toluene, ethylbenzene and xylenes (BTEX) are some of the better-known indoor air pollutants, for which effective monitoring is important. The analysis of BTEX can be performed by different type of solid phase microextraction (SPME) fibers. This study presents a proposal for a low cost, convenient and environmentally friendly analytical method for the determination of BTEX in air samples using custom made SPME fibers. In this context, custom made metal organic frameworks (MOF-801) were coated on a stainless-steel wire for SPME fiber preparation. The analysis of BTEX was performed by introducing SPME fiber into an analyte-containing Tedlar bag in steady-state conditions. After the sampling step, the analytes were analyzed using gas chromatography mass spectrometry in selected ion monitoring mode. Parameters that affect the analysis results were optimized; these include desorption temperature and time, preconditioning time, extraction temperature and time, and sample volume. Under optimized conditions, analytical figure of merits of developed method were obtained, including limits of detection (LOD) (0.012 - 0.048 mg/m3), linear ranges (0.041-18 mg/m3), intraday and interday repeatability (2.08 - 4.04% and 3.94 - 6.35%), and fiber to fiber reproducibility (7.51 - 11.17%). The proposed method was successfully applied to real air samples with an acceptable recovery values between 84.5% and 110.9%. The developed method can be applied for the effective monitoring of BTEX.

Electrothermaly conditioned carbon fibre for the analysis of volatile pollutants

This study deals with the development of an inexpensive and single-step sorbent manufacturing methodology for the analysis of air pollutants. Disposable carbon fibre sorbents were prepared in a few minutes using the electrothermal conditioning technique. The sorbent conditioning current and time were optimised to obtain the best extraction of benzene, toluene, ethylbenzene and xylenes (BTEX) from the air samples. After sorbent characterisation, analysis parameters affecting the BTEX extraction efficiency, such as sampling volume, humidity and sampling flow rate, were optimised for active BTEX sampling. Under optimum conditions, validation parameters such as the limit of detection (LOD), repeatability, reproducibility, and linear range were found to be 0.07-0.11 mg m ^- 3, 1.1%-1.8%, 5.6%-9.5% and 0.24-45 mg m ^- 3, respectively. Thereafter, the BTEX analysis was successfully conducted using the proposed method, with acceptable recovery values (96%-103%) in the real indoor environments.

Urinary bio-monitoring of aromatic amine derivatives by new needle trap device packed with the multi-component adsorbent

Aromatic amines are a large group of chemical compounds that have attracted the attention of researchers due to their toxicity and carcinogenicity. This study aimed to develop an efficient method for sampling and analysis of aromatic amines (Aniline, N, N-dimethylaniline, 2-chloroaniline, and 3-chloroaniline) from the vapour phase (headspace) of urine samples. For the implementation of this plan, a needle trap device packed with the three-component adsorbent consisting of nano-Hydroxy Apatite (nHA), Zeolite (Ze), and Metal-Organic Framework (MOF) equipped with GC-FID was employed for the first phase. Examination of the prepared adsorbents was performed by FT-IR, PXRD, and FE-SEM techniques. The optimal value of considerable parameters such as time and temperature of extraction, salt content, and pH were established using the Response Surface Methodology-Central Composite Design (RMS-CCD) method. In this way, the optimal extraction of targeted analytes was accomplished in 41 min at 41 °C with NaCl content of 33.0% (w/v) and pH: 13.0, respectively. Also, the repeatability and reproducibility of the method were calculated to be in the range of 2.2-7.1% and 3.9-8.1%, respectively, which indicates the acceptable precision of the method. Also, the limit of detection (LOD) and limit of quantification (LOQ) were determined in the range of 0.3-32.0 ng.L^-1 and 0.8-350.0 ng.L^-1, respectively, which proves the high sensitivity of the proposed method. Furthermore, the recovery percent of the extracted analytes was concluded in the range of 97.0-99.0% after 6 and 30 days of the sampling and storage at 25 °C and 4 °C, respectively. Finally, the designed procedure was employed in the analysis of the above-mentioned aromatic amines in the real urine samples. The achieved results illustrate that the three-component absorbent system (nHA;Ze;MOF@NTD) can be introduced as an efficient, fast-response, sensitive, and versatile procedure for trace analysis of the different aromatic amine compounds in public and occupational health.

Analysis of semi-volatile organic compounds in indoor dust and organic thin films by house type in South Korea

In this study, semi-volatile organic compounds (SVOCs) in samples of indoor dust and organic thin films obtained from 100 residential houses in South Korea, were examined, based on both target analysis using gas chromatography-mass spectrometry (GC-MS) and non-target analysis by gas chromatography-quadrupole time-of flight mass spectrometry (GC-QTOF-MS) screening. In the targeted approach, phthalates and polycyclic aromatic hydrocarbons (PAHs) were analyzed in dust and organic film samples, to find that both these classes of SVOCs were detected in dust and organic film samples, with the median concentrations of eight phthalates (Σ₈ phthalate) and 16 PAHs (Σ₁₆ PAH) being 1015.93 μg/g and 1824.97 ng/g in the dust samples, and 75.79 μg/m² and 2252.78 ng/m² in the organic film samples, respectively. Among the phthalates, in all house types. bis(2-ethylhexyl) phthalate (DEHP) was detected at the highest concentration, followed by dibutyl phthalate (DBP) and diisobuthyl phthalate (DiBP), with DEHP levels found to be highest in dwelling houses. DEHP levels were found to be significantly associated with building age and renovation status. Lower levels of DEHP were detected in houses less than 10 years old or that had undergone renovation in the previous 10 years. Among the assessed PAHs, a significant correlation was detected between benzo(a)pyrene in dust and building age (p < 0.05). These findings imply that the inhabitants of older houses are at a greater risk of exposure to SVOCs originating from indoor dust and organic films. Non-target screening of selected dust and organic film samples using GC-QTOF-MS data revealed the presence of numerous SVOC compounds, including triphenylphosphine oxide, (Z)-9-octadecenamide, and cyclosiloxanes, along with certain organophosphate flame retardants including tris(1-chloro-2-propyl) phosphate (TCPP) and tris(1,3-dichloroisopropyl) phosphate (TDCPP), and plasticizers. These compounds identified in the non-target screening are of emerging concern, and their presence in dust and organic films needs to be estimated.

On-line trace monitoring of volatile halogenated compounds in air by improved thermal desorption-gas chromatography-mass spectrometry

Volatile halogenated compounds (VHCs) are important industrial chemicals and play a crucial role in potential stratospheric ozone-depletion and global warming. Profiling of VHCs is of great significance but replete with challenges due to the species' richness and diversity. In this study, we developed a novel method employing water removal mode combined with thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS) for on-line measurement of VHCs at the ultratrace level. By removing water with Nafion dryer tandem cold trap device, VHCs could achieve better separation and identification, and detection precision of VHCs lower than 10%. The proposed method exhibited limits of detection for VHCs ranging from 0.1 to 6.2 pptv. Benefiting from the improved trapping efficiency due to water removal, we successfully quantified 34 VHCs at the Shangdianzi background station and achieved a comprehensive assessment of VHCs in ambient air.

Recent advances in the chemical oxidation of gaseous volatile organic compounds (VOCs) in liquid phase

The chemical oxidation of gaseous volatile organic compounds (VOCs) in liquid phase may possess great advantages in its high removal efficiency, mild conditions, good reliability, wide applicability, and little potential secondary pollution, which has aroused extensive research interests in the past decade. This Overview Article summarizes the latest achievements to eliminate VOCs by chemical oxidation in liquid phase including gas-liquid mass transfer, homogeneous/heterogeneous oxidation, electrochemical oxidation, and coupling technologies. Important research contributions are highlighted in terms of mass transfer, catalytic materials, removal/mineralization efficiency, and reaction mechanism to evaluate their potential industrial applications. The current challenges and future strategies are discussed from the viewpoint of the deep degradation of refractory VOC substrates and their intermediates. It is anticipated that this review will attract more attention toward the development and application of chemical oxidation methods to clear complex industrial organic exhaust gas.

Novel solid-phase microextraction fiber coatings: A review

The materials used for the fabrication of solid-phase microextraction fiber coatings in the past five years are summarized in the current review, including carbon, metal-organic frameworks, covalent organic frameworks, aerogel, polymer, ionic liquids/poly (ionic liquids), metal oxides, and natural materials. The preparation approaches of different coatings, such as sol-gel technique, in-situ growth, electrodeposition, and glue methods, are briefly reviewed together with the evolution of the supporting substrates. In addition, the limitations of the current coatings and the future development directions of solid-phase microextraction are presented.