Ecotoxicological effects of new generation pollutants (nanoparticles, amoxicillin and white musk) on freshwater and marine phytoplankton species

An overview on dispersion procedures and testing methods for the ecotoxicity testing of nanomaterials in the marine environment

Considerable efforts have been devoted to develop or adapt existing guidelines and protocols, to obtain robust and reproducible results from (eco)toxicological assays on engineered nanomaterials (NMs). However, while many studies investigated adverse effects of NMs on freshwater species, less attention was posed to the marine environment, a major sink for these contaminants. This review discusses the procedures used to assess the ecotoxicity of NMs in the marine environment, focusing on the use of protocols and methods for preparing NMs dispersions and on the NMs physicochemical characterization in exposure media. To this purpose, a critical analysis of the literature since 2010 was carried out, based on the publication of the first NMs dispersion protocols. Among the 89 selected studies, only <5 % followed a standardized dispersion protocol combined with NMs characterization in ecotoxicological media, while more than half used a non-standardized dispersion method but performed NMs characterization. In the remaining studies, only partial or no information on dispersion procedures or on physicochemical characterization was provided. This literature review also highlighted that metal oxides NMs were the most studied (42 %), but with an increasing interest in last years towards nanoplastics (14 %) and multicomponent nanomaterials (MCNMs, 7 %), in line with the growing attention on these emerging contaminants. For all these NMs, primary producers as algae and bacteria were the most studied groups of marine species, in addition to mollusca, while organisms at higher trophic levels were less represented, likely due to challenges in evaluating adverse effects on more complex organisms. Thus, despite the wide use of NMs in different applications, standard dispersion protocols are not often used for ecotoxicity testing with marine species. However, the efforts to characterize NMs in ecotoxicological media recognize the importance of following conditions that are as standardized as possible to support the ecological hazard assessment of NMs.

Metal nanoparticle-induced effects on green toads (Amphibia, Anura) under climate change: conservation implications

The toxicity of aluminum oxide (Al2O3), copper oxide (CuO), iron oxide (Fe3O4), nickel oxide (NiO), zinc oxide (ZnO), and titanium dioxide (TiO2) nanoparticles (NPs) on amphibians and their interaction with high temperatures, remain unknown. In this study, we investigated the survival, developmental, behavioral, and histological reactions of Bufotes viridis embryos and larvae exposed to different NPs for a duration of 10 days, using lethal concentrations (LC25%, LC50%, and LC75% mg/L) under both ambient (AT: 18 °C) and high (HT: 21 °C) temperatures. Based on LC, NiONPs > ZnONPs > CuONPs > Al2O3NPs > TiO2NPs > Fe3O4NPs showed the highest mortality at AT. A similar pattern was observed at HT, although mortality occurred at lower concentrations and Fe3O4NPs were more toxic than TiO2NPs. The results indicated that increasing concentrations of NPs significantly reduced hatching rates, except for TiO2NPs. Survival rates decreased, abnormality rates increased, and developmental processes slowed down, particularly for NiONPs and ZnONPs, under HT conditions. However, exposure to low concentrations of Fe3O4NPs for up to 7 days, CuONPs for up to 72 h, and NiO, ZnONPs, and TiO2NPs for up to 96 h did not have a negative impact on survival compared with the control group under AT. In behavioral tests with larvae, NPs generally induced hypoactivity at AT and hyperactivity at HT. Histological findings revealed liver and internal gill tissue lesions, and an increase in the number of melanomacrophage centers at HT. These results suggest that global warming may exacerbate the toxicity of metal oxide NPs to amphibians, emphasizing the need for further research and conservation efforts in this context.

Advancing sustainable seawater disinfection: Enhanced inactivation and mechanism of pulsed UV-LEDs irradiation on Tetraselmis sp

Ultraviolet light-emitting diodes (UV-LEDs), as a novel ultraviolet light source with flexible pulse mode, has gained significant attention for applications in water disinfection and food sterilization. This study investigated the comparative inactivation efficiency of Tetraselmis sp. with continuous and pulsed UV-LEDs irradiation, exploring different wavelengths, duty rates and pulse frequencies. The results reveal a significant enhancement in inactivation efficiency (p < 0.05) under pulsed conditions even at the same UV dose, with inactivation efficiency increasing as duty rate or pulse frequency decreases. The optimal conditions for achieving peak inactivation efficacy are identified as a duty rate of 50% and a pulse frequency of 5 Hz. Within this parameter space, pulsed irradiation leads to a remarkable 1.7-fold increase in inactivation efficiency at UV265 nm and a 1.5-fold increase at UV285 nm compared to continuous irradiation, respectively. Additionally, the disruptive impacts on photosynthetic performance are more pronounced with pulsed irradiation, particularly at the 5 Hz pulse frequency. In shed of these findings, the application of pulsed UV-LEDs irradiation emerges as a promising alternative to the conventional continuous UV disinfection methods in the area of seawater disinfection, offering higher disinfection efficacy and energy consumption.

Toxicity of the disinfectant benzalkonium chloride (C14) towards cyanobacterium Microcystis results from its impact on the photosynthetic apparatus and cell metabolism

Quaternary ammonium compounds (QACs) are commonly used in a variety of consumer and commercial products, typically as a component of disinfectants. During the COVID-19 pandemic, QACs became one of the primary agents utilized to inactivate the SARS-CoV-2 virus on surfaces. However, the ecotoxicological effects of QACs upon aquatic organisms have not been fully assessed. In this study, we examined the effects of a widely used QAC (benzalkonium chloride-C14, BAC-14) on two toxigenic Microcystis strains and one non-toxigenic freshwater Microcystis strain and carried out an analysis focused on primary, adaptive and compensatory stress responses at apical (growth and photosynthesis) and metabolic levels. This analysis revealed that the two toxic Microcystis strains were more tolerant than the non-toxic strain, with 96 hr-EC50 values of 0.70, 0.76, and 0.38 mg/L BAC-14 for toxigenic M. aeruginosa FACHB-905, toxigenic M. aeruginosa FACHB-469, and non-toxigenic M. wesenbergii FACHB-908, respectively. The photosynthetic activities of the Microcystis, assessed via Fv/Fm values, were significantly suppressed under 0.4 mg/L BAC-14. Furthermore, this analysis revealed that BAC-14 altered 14, 12, and 8 metabolic pathways in M. aeruginosa FACHB-905, M. aeruginosa FACHB-469, and M. wesenbergii FACHB-908, respectively. It is noteworthy that BAC-14 enhanced the level of extracellular microcystin production in the toxigenic Microcystis strains, although cell growth was not significantly affected. Collectively, these data show that BAC-14 disrupted the physiological and metabolic status of Microcystis cells and stimulated the production and release of microcystin, which could result in damage to aquatic systems.

"From shadows to shores"-quantitative analysis of CuO nanoparticle-induced apoptosis and DNA damage in fish erythrocytes: A multimodal approach combining experimental, image-based quantification, docking and molecular dynamics

The usage of copper (II) oxide nanoparticles (CuO NPs) has significantly expanded across industries and biomedical fields. However, the potential toxic effects on non-target organisms and humans lack comprehensive understanding due to limited research on molecular mechanisms. With this study, by combining the 96 h in vivo exposure of crucian carp fish, Carassius carassius, to sub-lethal CuO NPs doses (0.5 and 1 mg/dL) with image-based quantification, and docking and molecular dynamics approaches, we aimed to understand the mechanism of CuO NPs-induced cyto-genotoxicity in the fish erythrocytes. The results revealed that both doses of copper NPs used were toxic to erythrocytes causing oxidative stress response and serious red blood cell morphological abnormalities, and genotoxicity. Docking and 10-ns molecular dynamics confirmed favorable interactions (ΔG = -2.07 kcal mol-1) and structural stability of Band3-CuO NP complex, mainly through formation of H-bonds, implying the potential of CuO NPs to induce mitotic nuclear abnormalities in C. carassius erythrocytes via Band3 inhibition. Moreover, conventional and multiple ligand simultaneous docking with DNA revealed that single, double and triple CuO NPs bind preferentially to AT-rich regions consistently in the minor grooves of DNA. Of note, the DNA-binding strength subtantially increased (ΔG = -2.13 kcal mol-1, ΔG = -4.08 kcal mol-1, and ΔG = -6.03 kcal mol-1, respectively) with an increasing number of docked CuO NPs, suggesting that direct structural perturbation on DNA could also count for the molecular basis of in-vivo induced DNA damage in C. carassius erythrocytes. This study introduces the novel term "erythrotope" to describe comprehensive red blood cell morphological abnormalities. It proves to be a reliable and cost-effective biomarker for evaluating allostatic erythrocyte load in response to metallic nanoparticle exposure, serving as a distinctive fingerprint to assess fish erythrocyte health and physiological fitness.

Unraveling the hazardous impact of diverse contaminants in the marine environment: Detection and remedial approach through nanomaterials and nano-biosensors

Marine pollution is one of the most underlooked forms of pollution as it affects most aquatic lives and public health in the coastal area. The diverse form of the hazardous pollutant in the marine ecosystem leads the serious genetic level disorders and diseases which include cancer, diabetes, arthritis, reproductive, and neurological diseases such as Parkinson's, Alzheimer's, and several microbial infections. Therefore, a recent alarming study on these pollutants, the microplastics have been voiced out in many countries worldwide, it was even found to be in the human placenta. In recent times, nanomaterials have demonstrated their potential in the detection and remediation of sensitive contaminants. In this review, we presented a comprehensive overview of the source, and distribution of diverse marine pollution on both aquatic and human health by summarizing the concentration of diverse pollutions (heavy metals, pesticides, microbial toxins, and micro/nano plastics) in marine samples such as soil, water, and seafood. Followed by emphasizing its ecotoxicological impact on aquatic animal life and coastal public health. Also discussed are the applicability and advancements of nanomaterials and nano-based biosensors in the detection, prevention, and remediation of diverse pollution in the marine ecosystem.

Heterogeneous Photocatalysis of Amoxicillin under Natural Conditions and High-Intensity Light: Fate, Transformation, and Mineralogical Impacts

The β-Lactam antibiotic amoxicillin is among the most widely used antibiotics in human and veterinary medicine. Consequently, amoxicillin is abundant in natural waters and can undergo diverse abiotic reactions to form degradation compounds under environmental conditions. Yet, little is known about these decay pathways and mineralogical impacts on environmental amoxicillin degradation. The current study focuses on understanding the mineralogical influences of amoxicillin degradation under ecological conditions. We studied the role of anatase and kaolinite on amoxicillin degradation under irradiated and non-irradiated conditions. Anatase increases amoxicillin degradation by 4.5-fold in the presence of light compared to just being exposed to sunlight. Interestingly, anatase also showed a higher degradation rate under dark than light controls. Conversely, kaolinite diminishes the amoxicillin degradation under irradiation. The formation of degradation compounds was mineralogy-controlled, while no mineralization was observed. Further, we irradiated amoxicillin with a high-intensity light to evaluate its removal from wastewater. The formation of varying amoxicillin degradation products with high-intensity light will limit its removal from wastewater. Our study emphasizes that the mineralogical impact on amoxicillin degradation is diverse, and the role of anatase is significant. Consequently, the increased addition of manufactured titanium nanoparticles to the environment can further enhance these effects.

Occurrence of antibiotics in waters, removal by microalgae-based systems, and their toxicological effects: A review

Global antibiotics consumption has been on the rise, leading to increased antibiotics release into the environment, which threatens public health by selecting for antibiotic resistant bacteria and resistance genes, and may endanger the entire ecosystem by impairing primary production. Conventional bacteria-based treatment methods are only moderately effective in antibiotics removal, while abiotic approaches such as advanced oxidation and adsorption are costly and energy/chemical intensive, and may cause secondary pollution. Considered as a promising alternative, microalgae-based technology requires no extra chemical addition, and can realize tremendous CO₂ mitigation accompanying growth related pollutants removal. Previous studies on microalgae-based antibiotics removal, however, focused more on the removal performances than on the removal mechanisms, and few studies have concerned the toxicity of antibiotics to microalgae during the treatment process. Yet understanding the removal mechanisms can be of great help for targeted microalgae-based antibiotics removal performances improvement. Moreover, most of the removal and toxicity studies were carried out using environment-irrelevant high concentrations of antibiotics, leading to reduced guidance for real-world situations. Integrating the two research fields can be helpful for both improving antibiotics removal and avoiding toxicological effects to primary producers by the residual pollutants. This study, therefore, aims to build a link connecting the occurrence of antibiotics in the aquatic environment, the removal of antibiotics by microalgae-based processes, and the toxicity of antibiotics to microalgae. Distribution of various categories of antibiotics in different water environments were summarized, together with the antibiotics removal mechanisms and performances in microalgae-based systems, and the toxicological mechanisms and toxicity of antibiotics to microalgae after either short-term or long-term exposure. Current research gaps and future prospects were also analyzed. The review could provide much valuable information to the related fields, and provoke interesting thoughts on integrating microalgae-based antibiotics removal research and toxicity research on the basis of environmentally relevant concentrations.