Removal and recovery of heavy metals from sewage sludge via three-stage integrated process

Inhibition of zinc ions in sulfur-driven autotrophic denitrification process: What is the behavior of extracellular polymeric substances?

Sulfur-driven autotrophic denitrification (SAD) process is a cost-effective and sustainable method for nitrogen removal from wastewater. However, a higher concentration of zinc ions (Zn(II)) flowing into wastewater treatment plants poses a potential threat to the SAD process. This study examined that a half maximal inhibitory concentration (IC50) of Zn(II) was 7 mg·L-1 in the SAD process. Additionally, the addition of 20 mg·L-1 Zn(II) resulted in a severe accumulation of nitrite to 150.20 ± 6.00 mg·L-1 when the initial concentration of nitrate was 500 mg·L-1. Moreover, the activities of nitrate reductase, nitrite reductase, dehydrogenase and electron transport system were significantly inhibited under Zn(II) stress. The addition of Zn(II) inhibited EPS secretion and worsened electrochemical properties. The result was attributed to the spontaneous binding between EPS and Zn(II), with a ΔG of -17.50 KJ·mol-1 and a binding constant of 1.77 × 104 M-1, respectively. Meanwhile, the protein, fulvic acid, and humic-like substances occurred static quenching after Zn(II) addition, with -OH and -C=O groups providing binding sites. The binding sequence was fulvic acid→protein→humic acid and -OH → -C=O. Zn(II) also reduced the content of α-helix, which was unfavorable for electron transfer. Additionally, the Zn(II) loosened protein structure, resulting in a 50 % decrease in α-helix/(β-sheet+random coil). This study reveals the effect of Zn(II) on the SAD process and enhances our understanding of EPS behavior under metal ions stress.

Ammonium-based bioleaching of toxic metals from sewage sludge in a continuous bioreactor

The broader reuse of sewage sludge as a soil fertilizer or conditioner is impeded by the presence of toxic metals. Bioleaching, a process that leverages microbial metabolisms and metabolites for metal extraction, is viewed as an economically and environmentally feasible approach for metal removal. This study presents an innovative bioleaching process based on microbial oxidation of ammonia released from sludge hydrolysis, mediated by a novel acid tolerant ammonia-oxidizing bacteria (AOB), Ca. Nitrosoglobus. Over a span of 1024 days, a laboratory-scale bioleaching reactor processing anaerobically digested (AD) sludge achieved an in-situ pH of 2.5 ± 0.3. This acidic environment facilitated efficient leaching of toxic metals from AD sludge, upgrading its quality from Grade C to Grade A (qualified for unrestricted use), according to both stabilization and contaminants criteria. The improved quality of AD sludge could potentially reduce sludge disposal expenses and enable a broader reuse of biosolids. Furthermore, this study revealed a pH-dependent total ammonia affinity of Ca. Nitrosoglobus, with a higher affinity constant at pH 3.5 (67.3 ± 20.7 mg N/L) compared to pH 4.5-7.5 (7.6 - 9.6 mg N/L). This finding indicates that by optimizing ammonium concentrations, the efficiency of this novel ammonium-based bioleaching process could be significantly increased.

Copper and chromium removal from industrial sludge by a biosurfactant-based washing agent and subsequent recovery by iron oxide nanoparticles

Industrial wastewater treatment generates sludge with high concentrations of metals and coagulants, which can cause environmental problems. This study developed a sequential sludge washing and metal recovery process for industrial sludge containing > 4500 mg/kg Cu and > 5000 mg/kg Cr. The washing agent was formulated by mixing glycolipid, lipopeptide, and phospholipid biosurfactants from Weissella cibaria PN3 and Brevibacterium casei NK8 with a chelating agent, ethylenediaminetetraacetic acid (EDTA). These biosurfactants contained various functional groups for capturing metals. The optimized formulation by the central composite design had low surface tension and contained relatively small micelles. Comparable Cu and Cr removal efficiencies of 37.8% and 38.4%, respectively, were obtained after washing the sludge by shaking with a sonication process at a 1:4 solid-to-liquid ratio. The zeta potential analysis indicated the bonding of metal ions on the surface of biosurfactant micelles. When 100 g/L iron oxide nanoparticles were applied to the washing agent without pH adjustment, 83% Cu and 100% Cr were recovered. In addition, X-ray diffraction and X-ray absorption spectroscopy of the nanoparticles showed the oxidation of nanoparticles, the reduction of Cr(V) to the less toxic Cr(III), and the absorption of Cu. The recovered metals could be further recycled, which will be beneficial for the circular economy.

Germination, cytotoxicity, and mutagenicity in Lactuca sativa L. and Passiflora alata Curtis in response to sewage sludge application

The physical and chemical characteristics of the soil can influence plant growth. When sewage sludge (SS) is applied as a soil fertilizer, the accumulation of non-essential elements contained in it can be toxic for plants. The aim of this study was to understand the effect of SS dosage on the cell cycle of Lactuca sativa L. meristematic cells and on the initial growth of L. sativa and Passiflora alata Curtis. Nine concentrations of SS + distilled water (mg dm-3) corresponding to 0, 20, 40, 60, 80, 120, 160, 320, and 520 t ha-1 were tested in four replicates of 25 seeds. Chemical analysis showed an increase in pH of the sludge from 0 to 80 t ha-1 SS followed by its stabilization thereafter. The highest electrical conductivity was observed at 520 t ha-1 SS. SS negatively affected the germination and initial growth of seedlings from P. alata and L. sativa. Cytogenetic analysis on 6000 L. sativa meristematic cells for each treatment revealed that SS could adversely affect the genetic stability of this species. SS concentrations above 120 t ha-1 adversely affected the germination and early seedling growth of L. sativa and P. alata. At high concentrations (120 t ha-1), SS induced genetic lesions in L. sativa, along with chromosomal and nuclear alterations.

Experimental study on the redistribution law of heavy metals in sludge disintegration

Aiming at the problems of large output of excess sludge, difficulty in treatment and disposal, and the potential toxicity of heavy metals restricting its resource utilization, this paper studies the redistribution law of heavy metals in the process of sludge disintegration. The dissertation investigates the distribution law of typical heavy metals such as Cu, Pb, Cd, Zn in the process of microwave and citric acid-microwave cracking sludge under different specific energy and fixed specific energy conditions. The Tessier five-step continuous extraction method was used to extract heavy metals, and the changes in their content and chemical forms were analyzed, which provided certain technical support for the subsequent harmless treatment and resource utilization of excess sludge. The main findings of this paper are as follows: The dissolution rate of heavy metals Cu, Pb, Cd, and Zn increased rapidly during the citric acid-microwave cracking process in the TS specific energy range of 0-45000 kJ/kg, and then gradually tended to be gradual. The maximum dissolution rates of Cu, Pb, Cd, Zn were 8.06%, 16.58%, 14.69%, and 24.11%, respectively. The concentrations of Cu, Pb, Cd, and Zn in the sludge were mainly F4; F3, F4; F2, F3. The proportions of stable states of Cu, Pb, Cd, and Zn in sludge increased to 88.6%, 55.91%, 35.7%, and 31.35%, respectively. When the specific energy was 45000 kJ/kg TS, the concentrations of Pb, Zn, and Cd in the solid phase of the sludge appeared to increase under microwave cracking alone and decrease under the combined action of citric acid and microwave. The concentration of Cu in the solid phase of the sludge increased slightly. The dissolution rates of Pb, Cd, and Zn by microwave alone and citric acid-microwave method were 14.23% and 16.58%, 10.34% and 14.69%, 17.53%, and 24.11%, respectively. The dissolution rates of Cu by both methods were lower. The steady state ratios of Pb and Zn in the citric acid-microwave method increased to 55.91% and 31.25%, respectively; the steady state ratio of Cd in the microwave alone method increased to 39.51%; both methods had no significant effect on the stability of Cu.

Characteristics of Solidified Carbon Dioxide and Perspectives for Its Sustainable Application in Sewage Sludge Management

Appropriate management is necessary to mitigate the environmental impacts of wastewater sludge. One lesser-known technology concerns the use of solidified CO₂ for dewatering, sanitization, and digestion improvement. Solidified CO₂ is a normal byproduct of natural gas treatment processes and can also be produced by dedicated biogas upgrading technologies. The way solidified CO₂ is sourced is fully in line with the principles of the circular economy and carbon dioxide mitigation. The aim of this review is to summarize the current state of knowledge on the production and application of solid CO₂ in the pretreatment and management of sewage sludge. Using solidified CO₂ for sludge conditioning causes effective lysis of microbial cells, which destroys activated sludge flocs, promotes biomass fragmentation, facilitates efficient dispersion of molecular associations, modifies cell morphology, and denatures macromolecules. Solidified CO₂ can be used as an attractive tool to sanitize and dewater sludge and as a pretreatment technology to improve methane digestion and fermentative hydrogen production. Furthermore, it can also be incorporated into a closed CO₂ cycle of biogas production-biogas upgrading-solidified CO₂ production-sludge disintegration-digestion-biogas production. This feature not only bolsters the technology's capacity to improve the performance and cost-effectiveness of digestion processes, but can also help reduce atmospheric CO₂ emissions, a crucial advantage in terms of environment protection. This new approach to solidified CO₂ generation and application largely counteracts previous limitations, which are mainly related to the low cost-effectiveness of the production process.

Microbiologically induced calcite precipitation for in situ stabilization of heavy metals contributes to land application of sewage sludge

Microbiologically induced calcite precipitation (MICP) has shed new light on solving the problem of in situ stabilization of heavy metals (HMs) in sewage sludge before land disposal. In this study, we examined whether MICP treatment can be integrated into a sewage sludge anaerobic digestion-land application process. Our results showed that MICP treatment not only prevented the transfer of ionic-state Cd from the sludge to the supernatant (98.46 % immobilization efficiency) but also reduced the soluble exchangeable Pb and Cd fractions by up to 100 % and 48.54 % and increased the residual fractions by 22.54 % and 81.77 %, respectively. In addition, the analysis of the stability of HMs in MICP-treated sludge revealed maximum reductions of 100 % and 89.56 % for TCLP-extractable Pb and Cd, respectively. Three-dimensional fluorescence, scanning electron microscopy-energy-dispersive X-ray spectroscopy, X-ray diffraction, and Fourier-transform infrared spectroscopy analyses confirmed the excellent performance of the ureolytic bacteria Sporosarcina ureilytica ML-2 in the sludge system. High-throughput sequencing showed that the relative abundance of Sporosarcina sp. reached 53.18 % in MICP-treated sludge, and the urease metabolism functional genes unit increased by a maximum of 239.3 %. The MICP technology may be a feasible method for permanently stabilizing HMs in sewage sludge before land disposal.

Innovative progress in graphene derivative-based composite hybrid membranes for the removal of contaminants in wastewater: A review

Graphene derivatives (graphene oxide) are proved as an innovative carbon materials that are getting more attraction in membrane separation technology because of its unique properties and capability to attain layer-to-layer stacking, existence of high oxygen-based functional groups, and generation of nanochannels that successively enhance the selective pollutants removal performance. The review focused on the recent innovations in the development of graphene derivative-based composite hybrid membranes (GDHMs) for the removal of multiple contaminants from wastewater treatment. To design GDHMs, it was observed that at first GO layers undergo chemical treatments with either different polymers, plasma, or sulfonyl. After that, the chemically treated GO layers were decorated with various active functional materials (either with nanoparticles, magnetite, or nanorods, etc.). By preparing GDHMs, properties such as permeability, porosity, hydrophilicity, water flux, stability, feasibility, mechanical strength, regeneration ability, and antifouling tendency were excessively improved as compared to pristine GO membranes. Different types of novel GDHMs were able to remove toxic dyes (77-100%), heavy metals/ions (66-100%), phenols (40-100%), and pharmaceuticals (74-100%) from wastewater with high efficiency. Some of GDHMs were capable to show dual contaminant removal efficacy and antibacterial activity. In this study, it was observed that the most involved mechanisms for pollutants removal are size exclusion, transport, electrostatic interactions, adsorption, and donnan exclusion. In addition to this, interaction mechanism during membrane separation technology has also been elaborated by density functional theory. At last, in this review the discussion related to challenges, limitations, and future outlook for the applications of GDHMs has also been provided.

Study of fluorescence spectroscopy and molecular mechanisms for the interaction of Hg2+ ions and R-phycoerythrin from marine algae (Porphyra yezoensis)

Heavy metal is a worldwide hazardous material, and many efforts were made to detect them sensitively and selectively. R-phycoerythrin (R-PE), a marine fluorescent protein, is abundant in red algae and participates in photosynthesis. In this work, the fluorescence spectroscopy and molecular mechanism of Hg2+ ions and R-PE were further explored through fluorescence spectrum measurements, time-resolved fluorescence lifetimes, peak fitting of Fourier transform infrared spectroscopy, and molecular docking simulation in this study. It was proved by fluorescent spectrum measurements that Hg2+ ions could lead to static fluorescence quenching. Besides, the interaction was a spontaneous and exothermic process driven by hydrogen bond and Van der Waals (VDW) force. Importantly, Hg2+ ions bound to 78LYS and 82CYS on the α chain and 73CYS and 82CYS on the β chain, which resulted in the structural changes of the peptide chain and affected the secondary structure contents of R-PE. This study further explained the effect of Hg2+ ions on marine fluorescent protein R-PE.

A closed-loop electrokinetic system for recovery of PbO2@Fe composite derived from lead-containing sludge

Lead-containing sludge produced from lead-acid battery factory will cause environmental hazards if they are not treated properly. A novel process was developed to recycle lead from sludge back into Fe-doped PbO₂ electrodes and realize sludge reduction in this study. The effects of Fenton conditioning on Pb removal efficiency in electro-kinetic (EK) treatment process and its mechanism as well as electro-dewatering (ED) performance were investigated. It was found that the oxidation of Fenton can promote desorption and release of Pb from the organic binding state, and improve the removal efficiency of Pb during EK process, as well as enhance sludge ED performance. About 63.8 wt% Pb can be removed from sludge during EK process, achieving sludge reduction of 63.5 wt% by ED treatment. The composite PbO₂@Fe electrode recovered from lead-containing sludge showed a high electrocatalytic activity for acid red G (ARG) degradation. The electrode obtained by electrodeposition at 20 mA cm^-2 had the largest exchange current density (3.26 × 10^-5 A cm^-2). In the experiment of dye wastewater electrocatalytic degradation, over 99.5% organic matter was degraded within 80 min.

Assessing the influence of sewage sludge and derived-biochar in immobilization and transformation of heavy metals in polluted soil: Impact on intracellular free radical formation in maize

As one of the most common ways to get rid of municipal waste, landfill leachate, waste with complicated compositions and high levels of contaminants, has become a significant threat to the world's environment. Here, the impact of sewage sludge (SS) and derived-biochar (SSB) amendments on the immobilization and potential mobility of heavy metals in a contaminated soil-plant system was investigated. The sequential fractionation findings showed that using SS-2%, SSB-2%, and SSBC-1% reduced the potential mobility of heavy metals while increasing the residual fraction in polluted soils. The translocation and bioconcentration factors showed that heavy metals were slightly transferred into shoots from roots and lowered accumulation in roots from contaminated soils. Fourier transform infrared (FTIR) and X-ray photoelectron spectrum (XPS) comprehensive characterization results indicated the significant role of applied amendments for heavy metals transformation from the exchangeable-soluble fractions to the least available form by lowering their mobility to confirm the adsorption-based complexes, which results in the surface adsorption of heavy metals with functional groups. The electron paramagnetic resonance (EPR) results indicated the dominance of reactive oxygen species (ROS) in the intracellular formation of hydroxyl radicals (•OH) in maize plant roots and shoots. ROS (•OH) generation plays a critical influence in the interaction between the physiological processes of plants and heavy metals. Moreover, all the amendments increased maize growth and biomass production. Our study suggests that alone and combined application of SS and SSB have great potential to remediate heavy metals contaminated soil for environmental sustainability.

pH and pCl Operational Parameters in Some Metallic Ions Separation with Composite Chitosan/Sulfonated Polyether Ether Ketone/Polypropylene Hollow Fibers Membranes

The development of new composite membranes is required to separate chemical species from aggressive environments without using corrective reagents. One such case is represented by the high hydrochloric acid mixture (very low pH and pCl) that contains mixed metal ions, or that of copper, cadmium, zinc and lead ions in a binary mixture (Cu-Zn and Cd-Pb) or quaternary mixture. This paper presents the obtaining of a composite membrane chitosan (Chi)-sulfonated poly (ether ether ketone) (sPEEK)-polypropylene hollow fiber (Chi/sPEEK/PPHF) and its use in the separation of binary or quaternary mixtures of copper, cadmium, zinc, and lead ions by nanofiltration and pertraction. The obtained membranes were morphologically and structurally characterized using scanning electron microscopy (SEM), high resolution SEM (HR-SEM), energy dispersive spectroscopy analysis (EDAX), Fourier Transform InfraRed (FTIR) spectroscopy, thermogravimetric analysis, and differential scanning calorimetry (TGA-DSC), but also used in preliminary separation tests. Using the ion solutions in hydrochloric acid 3 mol/L, the separation of copper and zinc or cadmium and lead ions from binary mixtures was performed. The pertraction results were superior to those obtained by nanofiltration, both in terms of extraction efficiency and because at pertraction, the separate cation was simultaneously concentrated by an order of magnitude. The mixture of the four cations was separated by nanofiltration (at 5 bars, using a membrane of a 1 m² active area) by varying two operational parameters: pH and pCl. Cation retention could reach 95% when adequate values of operational parameters were selected. The paper makes some recommendations for the use of composite membranes, chitosan (Chi)-sulfonated poly (ether ether ketone) (sPEEK)-polypropylene hollow fiber (Chi/sPEEK/PPHF), so as to obtain the maximum possible retention of the target cation.

Effect of Sewage Sludge Addition on Microstructure and Mechanical Properties of Kaolin-Sewage Sludge Ceramic Bricks

The dramatic increase in sewage sludge production requires researchers to develop and explore more commercially viable ways for alleviating current environmental and socioeconomic challenges connected with its routine management. It has been established that sewage sludge can be processed to fabricate various valuable products or as fuels for electricity generation. In this research, kaolin (calcined from coal gangue) and sewage sludge were successfully used to prepare porous ceramic bricks without any additives. The effect of sewage sludge on the microstructure, phase composition, and mechanical properties of kaolin-sewage sludge ceramic bricks was investigated. The results show that the kaolin-sewage sludge ceramic bricks are mainly composed of mullite (3Al2O3·2SiO2), sillimanite (Al2SiO5), aluminum phosphate (AlPO4), hematite (Fe2O3) as well as a small amount of quartz (SiO2). The ceramic bricks present a typical porous structure, and the number and size of micropores increases noticeably with the increase of sewage sludge content. The sintering shrinkage rate and porosity of ceramic bricks increased significantly with the increase of sewage sludge content, which is mainly attributed to the increase of liquid phase proportion and high temperature volatilization. Sewage sludge can significantly improve the mechanical properties of kaolin-sewage sludge ceramic bricks. When the sewage sludge content is 30 wt.%, the ceramic bricks present the maximum compressive strength and flexural strength and high porosity (32.74%). The maximum sintering shrinkage rate and porosity are 12.17% and 40.51%, respectively.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Risk Assessment and Potential Analysis of the Agricultural Use of Sewage Sludge in Central Shanxi Province

The agricultural use of sewage sludge has become an economic disposal method used worldwide. However, heavy metals contained in sewage sludge have become the crucial limiting factors for this way of disposal. This study showed that regulatory limit values are not enough to determine whether sewage sludge is suitable for agricultural use; risk assessment and potential analysis should be applied. Correlation analysis and hierarchical cluster analysis (HCA) should also be performed to identify heavy metals' sources and show their influence on sewage sludge utilization. Samples were collected from 13 wastewater treatment plants (WWTPs) located in central Shanxi Province. Results indicated that the mean contents of heavy metals in sewage sludge were all less than the limit threshold of China. According to the monomial potential ecological risk coefficient (), the agricultural use of sewage sludge had low ecological risks for all heavy metals, except for Hg and Cd. Based on the potential ecological risk index (RI), only three stations had moderate risk, other nine stations all had higher potential risk. The mean potentials by all heavy metals were all beyond 10 years, which is the limit of the maximum application time specified by China. Combining all heavy metals, only one station's potential was less than 10 years. Although the contents of heavy metals were all within the threshold values, large quantities of sewage sludge are not suitable for agricultural use. Coal-related industries, which were the main sources of Hg and Cd, greatly affected the agricultural use of sewage sludge.

Revealing the intrinsic drawbacks of waste activated sludge for efficient anaerobic digestion and the potential mitigation strategies

Anaerobic digestion (AD) is an effective approach for waste activated sludge (WAS) disposal with substantial recovery of valuable substrates. Previous studies have extensively explored the correlations of common operational parameters with AD efficiency, but the impacts of intrinsic characteristics of WAS on the AD processes are generally underestimated. This study focused on disclosing the association of intrinsic drawbacks in WAS with AD performance, and found that the cemented WAS structure, low fraction of biomass and various high levels of inhibitory pollutants (e.g., organic pollutants and heavy metals), as the integral parts of WAS all greatly restricted the AD performance. The main potential strategies and underlying mechanisms to mitigate the restrictions for efficient WAS digestion, including the practical pretreatment methods, bioaugmentation and aided substances addition, were critically analyzed. Also, future directions for the improvement of WAS digestion were proposed from the perspectives of technical, management and economic aspects.

Separation Iron(III)-Manganese(II) via Supported Liquid Membrane Technology in the Treatment of Spent Alkaline Batteries

In this paper, the transport of iron(III) from iron(III)-manganese(II)-hydrochloric acid mixed solutions, coming from the treatment of spent alkaline batteries through a flat-sheet supported liquid membrane, is investigated (the carrier phase being of Cyanex 923 (commercially available phosphine oxide extractant) dissolved in Solvesso 100 (commercially available diluent)). Iron(III) transport is studied as a function of hydrodynamic conditions, the concentration of manganese and HCl in the feed phase, and the carrier concentration in the membrane phase. A transport model is derived that describes the transport mechanism, consisting of diffusion through a feed aqueous diffusion layer, a fast interfacial chemical reaction, and diffusion of the iron(III) species-Cyanex 923 complex across the membrane phase. The membrane diffusional resistance (Δ_m) and feed diffusional resistance (Δ_f) are calculated from the model, and their values are 145 s/cm and 361 s/cm, respectively. It is apparent that the transport of iron(III) is mainly controlled by diffusion through the aqueous feed boundary layer, this being the thickness of this layer calculated as 2.9 × 10^-3 cm. Since manganese(II) is not transported through the membrane phase, the present system allows the purification of these manganese-bearing solutions.

Insights into the Anaerobic Hydrolysis Process for Extracting Embedded EPS and Metals from Activated Sludge

The amount of sewage sludge generated from wastewater treatment plants globally is unavoidably increasing. In recent years, significant attention has been paid to the biorefinery concept based on the conversion of waste streams to high-value products, material, and energy by microorganisms. However, one of the most significant challenges in the field is the possibility of controlling the microorganisms’ pathways in the anaerobic environment. This study investigated two different anaerobic fermentation tests carried out with real waste activated sludge at high organic loading rate (10 g COD L⁻¹d⁻¹) and short hydraulic retention time (HRT) to comprehensively understand whether this configuration enhances extracellular polymeric substance (EPS) and metal solubilisation. The quantity of EPS recovered increased over time, while the chemical oxygen demand to EPS ratio remained in the range 1.31–1.45. Slightly acidic conditions and sludge floc disintegration promoted EPS matrix disruption and release, combined with the solubilisation of organically bound toxic metals, such as As, Be, Cu, Ni, V, and Zn, thereby increasing the overall metal removal efficiency due to the action of hydrolytic microorganisms. Bacteroidetes, Firmicutes, and Chloroflexi were the most abundant phyla observed, indicating that the short HRT imposed on the systems favoured the hydrolytic and acidogenic activity of these taxa.

Biochar amendment to advance contaminant removal in anaerobic digestion of organic solid wastes: A review

Anaerobic digestion (AD) has been widely applied to convert organic solid wastes into biogas, a renewable energy, and digestate, a bio-fertilizer, to sustain waste management. Nevertheless, several vexing contaminants in OSWs restrict digestate application in agriculture. Biochar has been evidenced to effectively improve AD by promoting organic biodegradation and alleviating the accumulation of inhibitory substances (e.g. ammonia and volatile fatty acids). Furthermore, biochar could advance contaminant removal in AD given its highly porous, conductive and alkaline features. Thus, this review aims to highlight the role of biochar amendment to advance contaminant removal in AD of OSWs. Key contaminants, such as antibiotics, heavy metals, microplastics, polycyclic aromatic hydrocarbons, furfural and 5-hydroxy methyl furfural (5-HMF) that ubiquitously present in OSWs were demonstrated. The underlying mechanisms of biochar to amend the removal of these contaminants by AD were discussed. Furthermore, future perspectives to the development of biochar-assisted AD for OSWs treatment were provided.