Synergy between autotrophic denitrification and Anammox driven by FeS in a fluidized bed bioreactor for advanced nitrogen removal

Insights into carbon-neutral treatment of rural wastewater by constructed wetlands: A review of current development and future direction

In recent years, with the global rise in awareness regarding carbon neutrality, the treatment of wastewater in rural areas is increasingly oriented towards energy conservation, emission reduction, low-carbon output, and resource utilization. This paper provides an analysis of the advantages and disadvantages of the current low-carbon treatment process of low-carbon treatment for rural wastewater. Constructed wetlands (CWs) are increasingly being considered as a viable option for treating wastewater in rural regions. In pursuit of carbon neutrality, advanced carbon-neutral bioprocesses are regarded as the prospective trajectory for achieving carbon-neutral treatment of rural wastewater. The incorporation of CWs with emerging biotechnologies such as sulfur-based autotrophic denitrification (SAD), pyrite-based autotrophic denitrification (PAD), and anaerobic ammonia oxidation (anammox) enables efficient removal of nitrogen and phosphorus from rural wastewater. The advancement of CWs towards improved removal of organic and inorganic pollutants, sustainability, minimal energy consumption, and low carbon emissions is widely recognized as a viable low-carbon approach for achieving carbon-neutral treatment of rural wastewater. This study offers novel perspectives on the sustainable development of wastewater treatment in rural areas within the framework of achieving carbon neutrality in the future.

Insight into the mechanism of chlorinated nitroaromatic compounds anaerobic reduction with mackinawite (FeS) nanoparticles

Anaerobic biotechnology for wastewaters treatment can nowadays be considered as state of the art methods. Nonetheless, this technology exhibits certain inherent limitations when employed for industrial wastewater treatment, encompassing elevated substrate consumption, diminished electron transfer efficiency, and compromised system stability. To address the above issues, increasing interest is being given to the potential of using conductive non-biological materials, e,g., iron sulfide (FeS), as a readily accessible electron donor and electron shuttle in the biological decontamination process. In this study, Mackinawite nanoparticles (FeS NPs) were studied for their ability to serve as electron donors for p-chloronitrobenzene (p-CNB) anaerobic reduction within a coupled system. This coupled system achieved an impressive p-CNB removal efficiency of 78.3 ± 2.9% at a FeS NPs dosage of 1 mg/L, surpassing the efficiencies of 62.1 ± 1.5% of abiotic and 30.6 ± 1.6% of biotic control systems, respectively. Notably, the coupled system exhibited exclusive formation of aniline (AN), indicating the partial dechlorination of p-CNB. The improvements observed in the coupled system were attributed to the increased activity in the electron transport system (ETS), which enhanced the sludge conductivity and nitroaromatic reductases activity. The analysis of equivalent electron donors confirmed that the S2- ions dominated the anaerobic reduction of p-CNB in the coupled system. However, the anaerobic reduction of p-CNB would be adversely inhibited when the FeS NPs dosage exceeded 5 g/L. In a continuous operation, the p-CNB concentration and HRT were optimized as 125 mg/L and 40 h, respectively, resulting in an outstanding p-CNB removal efficiency exceeding 94.0% after 160 days. During the anaerobic reduction process, as contributed by the predominant bacterium of Thiobacillus with a 6.6% relative abundance, a mass of p-chloroaniline (p-CAN) and AN were generated. Additionally, Desulfomonile was emerged with abundances ranging from 0.3 to 0.7%, which was also beneficial for the reduction of p-CNB to AN. The long-term stable performance of the coupled system highlighted that anaerobic technology mediated by FeS NPs has a promising potential for the treatment of wastewater containing chlorinated nitroaromatic compounds, especially without the aid of organic co-substrates.

Intensified denitrification in a fluidized-bed reactor with suspended sulfur autotrophic microbial fillers

Sulfur-based autotrophic denitrification (SAD) is a promising low-carbon approach to tackle nitrate pollution. However, practical SAD reactor implementation faces challenges of slow denitrification rates and prolonged start-up periods. In this work, a fluidized-bed denitrification reactor with suspended composite fillers immobilized with elemental sulfur and SAD bacteria was constructed. The reactor reaches a steady state within the first day of operation. A denitrification rate of 0.61 g N L-1 d-1 was realized, which is 2.4-fold higher than that in the packed-bed reactor. Mixotrophic denitrification prevailed during the start-up period, while the SAD process became the predominant pathway (>70%) after several days of operation. The prevailing bacteria in the fillers, notably Thiobacillus, are enriched during denitrification operations. Overall, this study highlights the impressive denitrification capabilities of the fluidized SAD reactor with microbial fillers, providing valuable insights for enhancing denitrification techniques.

Multipathway of Nitrogen Metabolism Revealed by Genome-Centered Metatranscriptomics from Pyrite-Guided Mixotrophic Partial Denitrification/Anammox Installations

Further reducing the organic requirements is essential for the sustainable development of partial denitrification/anammox technology. Here, an innovative mixotrophic partial denitrification/anammox (MPD/A) installation fed with pyrite and few organics was realized, and the average nitrogen and phosphorus removal rates were as high as 96.24 ± 0.11% and 79.23 ± 2.06%, respectively, with a C/N ratio of 0.5. To understand the nature by which MPD/A achieves efficient nitrogen removal and organic conservation, the electron transfer-dependent nitrogen escape and energy metabolism were first elucidated using multiomics analysis. Apart from heterotrophic denitrification and anammox, the results revealed some unexpected metabolic couplings of MPD/A systems, in particular, putative nitrate-dependent organic and pyrite oxidation among nominally heterotrophic Denitratisoma (PRO3) strains, which accelerated nitrate gasification with a low-carbon supply. Additionally, Candidatus Brocadia (AMX) employed extracellular solid-state electron acceptors as terminal electron sinks for high-rate ammonium removal. AMX transported ammonium electrons to extracellular γFeO(OH) (generated from pyrite oxidation) through the transient storage of menaquinoline pools, cytoplasmic migration via multiheme cytochrome(s), and OmpA protein/nanowires-mediated electron hopping on cell surfaces. Further investigation observed that extracellular electron flux resulted in the transfer of more energy from the increased oxidation of the electron donor to the ATP, supporting nitrite-independent ammonium removal.

Performance, comparison and utilization of reduced sulfur (-2) compounds (S2-, FeS and SCN-) in autotrophic denitrification process by thiosulfate-driven autotrophic denitrifier

The coexistence of reduced sulfur (-2) compounds (S2-, FeS and SCN-) are found in some industrial wastewaters due to pre-treatment of Fe(II) salts. These compounds as electron donors have attracted increasing interest in autotrophic denitrification process. However, the difference of their functions still remain unknown, which limit efficient utilization in autotrophic denitrification process. The study aimed to investigate and compare utilization behavior of these reduced sulfur (-2) compounds in autotrophic denitrification process activated by thiosulfate-driven autotrophic denitrifiers (TAD). Results showed that the best denitrification performance was observed in SCN-; while the reduction of nitrate was significantly inhibited in S2- system and the efficient accumulation of nitrite was observed in FeS system with cycle experiments continuing. Additionally, intermediates containing sulfur were produced rarely in SCN- system. However, the utilization of SCN- was limited obviously in comparison with S2- in coexistence systems. Moreover, the presence of S2- increased the accumulation peak of nitrite in coexistence systems. The biological results indicated that the TAD utilized rapidly these sulfur (-2) compounds, in which genus of Thiobacillus, Magnetospirillum and Azoarcus might play main roles. Moreover, Cupriavidus might also participate in sulfur oxidation in SCN- system. In conclusion, these might be attributed to the characteristics of sulfur (-2) compounds including the toxicity, solubility and reaction process. These findings provide theoretical basis for regulation and utilization of these reduced sulfur (-2) compounds in autotrophic denitrification process.

Rapid start-up and long-term stable operation of the anammox reactor based on biofilm process: Status, challenges, and perspectives

Anammox-biofilm processes have great potential for wastewater nitrogen removal, as it overcomes the slow growth and easy loss of AnAOB (anaerobic ammonium oxidation bacteria). Biofilm carrier is the core part of the Anammox-biofilm reactor and plays a key role in the start-up and long-term operation of the process. Therefore, the research on the biofilm carrier of Anammox-based process was summarized and discussed in terms of configurations and types. In the Anammox-biofilm process, fixed bed biofilm reactor is a relatively mature biofilm carrier configuration and has advantages in terms of nitrogen removal and long-term operational stability, while moving bed biofilm reactor has advantages in terms of start-up time. Although the long-term operational stability of fluidized bed biofilm reactor is good, its nitrogen removal performance needs to be improved. Among the different biofilm carrier categories, the inorganic biofilm carrier has an advantage in start-up time, due to the enhancement of the growth and metabolic of AnAOB by inorganic materials (such as carbon and iron). Anammox-based reactors using organic biofilm carriers, especially suspension carriers, are well-established and more stable in long-term operation. Composite biofilm carriers combine the advantages of several materials, but their complex preparation procedures lead to high costs. In addition, possible research directions for accelerating the start-up and keeping the long-term stable operation of Anammox reactor by biofilm process were highlighted. It is hoped to provide a possible pathway for the rapid start-up of Anammox-based process, and references for the optimization and promotion of process.

Decryption for nitrogen removal in Anammox-based coupled systems: Nitrite-induced mechanisms

This study investigated the effects of NO₂^- on synergetic interactions between Anammox bacteria (AnAOB) and sulfur-oxidizing bacteria (SOB) in an autotrophic denitrification-Anammox system. The presence of NO₂^- (0-75 mg-N/L) was shown to significantly enhance NH₄⁺ and NO₃^- conversion rates, achieving intensified synergy between AnAOB and SOB. However, once NO₂^- exceed a threshold concentration (100 mg-N/L), both NH₄⁺ and NO₃^- conversion rates decreased with increased NO₂^- consumption via autotrophic denitrification. The cooperation between AnAOB and SOB was decoupled due to the NO₂^- inhibition. Improved system reliability and nitrogen removal performance was achieved in a long-term reactor operation with NO₂^- in the influent; reverse transcription-quantitative polymerase chain reaction analysis showed elevated hydrazine synthase gene transcription levels (5.00-fold), comparing to these in the reactor without NO₂^-. This study elucidated the mechanism of NO₂^- induced synergetic interactions between AnAOB and SOB, providing theoretical guidance for engineering applications of Anammox-based coupled systems.

The efficient utilization of thiocyanate on simultaneous removal of ammonium and nitrate through thiosulfate-driven autotrophic denitrifiers and anammox

The efficient utilization of thiocyanate remain be an important bottleneck in the low-cost nitrogen removal for wastewaters containing thiocyanate. The study aimed to investigate the feasibility of thiocyanate in removal of nitrate and ammonium through anammox (AN) and thiosulfate-driven autotrophic denitrifiers (TSAD). The results showed that removal of nitrate and ammonium were achieved rapidly utilizing thiocyanate, which was attributed to degradation of thiocyanate by TSAD and cooperation with AN. The utilization efficiency of thiocyanate in nitrogen removal was increased by 250% due to the microbial cooperation. Excess thiocyanate and ammonium did not influence the nitrogen removal amount. However, the nitrogen removal were affected obviously by the biomass ratio (X_AN/X_TSAD) between AN and TSAD Moreover, the dynamics related to removal of pollutants was described successfully by a modified Monod model with time constraints. These findings offer an insight for efficient utilization of thiocyanate in nitrogen removal via microbial cooperation.

Performance and mechanism of sacrificed iron anode coupled with constructed wetlands (E-Fe) for simultaneous nitrogen and phosphorus removal

Three anodic biofilm electrode coupled CWs (BECWs) with graphite (E-C), aluminum (E-Al), and iron (E-Fe), respectively, and a control system (CK) were constructed to evaluate the removal performance of N and P in the secondary effluent of wastewater treatment plants (WWTPs) under different hydraulic retention time (HRT), electrified time (ET), and current density (CD). Microbial communities, and different P speciation, were analyzed to reveal the potential removal pathways and mechanism of N and P in BECWs. Results showed that the optimal average TN and TP removal rates of CK (34.10% and 55.66%), E-C (66.77% and 71.33%), E-Al (63.46% and 84.93%), and E-Fe (74.93% and 91.22%) were obtained under the optimum conditions (HRT 10 h, ET 4 h, CD 0.13 mA/cm²), which demonstrated that the biofilm electrode could significantly improve N and P removal. Microbial community analysis showed that E-Fe owned the highest abundance of chemotrophic Fe(II) (Dechloromonas) and hydrogen autotrophic denitrifying bacteria (Hydrogenophaga). N was mainly removed by hydrogen and iron autotrophic denitrification in E-Fe. Moreover, the highest TP removal rate of E-Fe was attributed to the iron ion formed on the anode, causing co-precipitation of Fe(II) or Fe(III) with PO₄^3--P. The Fe released from the anode acted as carriers for electron transport and accelerated the efficiency of biological and chemical reactions to enhance the simultaneous removal of N and P. Thus, BECWs provide a new perspective for the treatment of the secondary effluent from WWTPs.

Enhancement and mechanisms of iron-assisted anammox process

Anaerobic ammonium oxidation (anammox) is a sustainable biological nitrogen removal technology that has limited large-scale applications owing to the low cell yield and high sensitivity of anammox bacteria (AnAOB). Fortunately, iron-assisted anammox, being a highly practical method could be an effective solution. This review focused on the iron-assisted anammox process, especially on its performance and mechanisms. In this review, the effects of iron in three different forms (ionic iron, zero-valent iron and iron-containing minerals) on the performance of the anammox process were systematically reviewed and summarized, and the strengthening effects of Fe (II) seem to be more prominent. Moreover, the detailed mechanisms of iron-assisted anammox in previous researches were discussed from macro to micro perspectives. Additionally, applicable iron-assisted methods and unified strengthening mechanisms for improving the stability of nitrogen removal and shortening the start-up time of the system in anammox processes were suggested to explore in future studies. This review was intended to provide helpful information for scientific research and engineering applications of iron-assisted anammox.

A hormesis-like effect of FeS on heterotrophic denitrification and its mechanisms

To alleviate the insufficiency of carbon source in sewage, many sulfur-containing inorganic electron donors were added into traditional heterotrophic denitrification process. However, the effects of extraneous inorganic electron donors on heterotrophic denitrification were still largely unknown. In this study, a hormesis-like effect of ferrous sulfide (FeS, a representative inorganic electron donors) on Paracoccus denitrificans was observed. Total nitrogen (TN) removal efficiency of P. denitrificans rose by 15% with the increase of FeS dosage from 0 to 0.3 g L^-1 (low level), whereas the TN removal significantly decreased to 53% as the dosage of FeS mounted up to 5.0 g L^-1 (high level). Furthermore, the impacts of FeS on glucose utilization and bacterial growth exhibited hormesis-like effects. A subsequent mechanistic study revealed that above influences were caused by its released ions (Fe²⁺, Fe³⁺, and S^2-) rather than particle size. Further study illustrated that low dosage of FeS released a small amount of Fe²⁺ and Fe³⁺, which provided sufficient electrons via promoting glucose utilization, then improved denitrification. Conversely, FeS with high dosage inhibited denitrification via its released S^2-, which suppressed the activity of key denitrifying enzymes rather than influenced glucose metabolism and electron provision. Our results provide an insight into improving denitrification efficiency of the mixotrophic process coexisting with autotrophic and heterotrophic denitrifiers.

Iron mediated autotrophic denitrification for low C/N ratio wastewater: A review

In recent years, iron mediated autotrophic denitrification has been a concern because it overcomes the absence of organic carbon and has been successfully used in denitrification for low C/N ratio wastewater. However, there is currently a lack of a more systematic summary of iron-based materials that can be used for denitrification, and no detailed overview about the mechanism of iron mediated autotrophic denitrification has been reported. In this study, the iron materials with different valence states that can be used for denitrification were summarized, and emphasized, as well as the mechanism in different interaction systems were emphasize. In addition, the contribution of various microorganisms in nitrate reduction were analyzed and the effects of operating conditions and water quality were evaluated. Finally, the challenges and shortcomings of the denitrification process were discussed aiming to find better practical engineering applications of iron-based denitrification.

Interactive effects of aquatic nitrogen and plant biomass on nitrous oxide emission from constructed wetlands

Understanding of mechanisms in nitrous oxide (N₂O) emission from constructed wetland (CW) is particularly important for the establishment of related strategies to reduce greenhouse gas (GHG) production during its wastewater treatment. However, plant biomass accumulation, microbial communities and nitrogen transformation genes distribution and their effects on N₂O emission from CW as affected by different nitrogen forms in aquatic environment have not been reported. This study investigated the interactive effects of aquatic nitrogen and plant biomass on N₂O emission from subsurface CW with NH₄⁺-N (CW-A) or NO₃^--N (CW-B) wastewater. The experimental results show that NH₄⁺-N and NO₃^--N removal efficiencies from CW mesocosms were 49.4% and 87.6%, which indirectly lead to N₂O emission fluxes of CW-A and CW-B maintained at 213 ± 67 and 462 ± 71 μg-N/(m²·h), respectively. Correlation analysis of nitrogen conversion dynamic indicated that NO₂^--N accumulation closely related to N₂O emission from CW. Aquatic NH₄⁺-N could up-regulate plant biomass accumulation by intensifying citric acid cycle, glycine-serine-threonine metabolism etc., resulting in more nitrogen uptake and lower N₂O emission/total nitrogen (TN) removal ratio of CW-A compared to CW-B. Although the abundance of denitrifying bacteria and N₂O reductase nosZ in CW-B were significantly higher than that of CW-A, after fed with mixed NH₄⁺-N and NO₃^--N influent, N₂O fluxes and N₂O emission/TN removal ratio in CW-A were extremely close to that of CW-B, suggesting that nitrogen form rather than nitrogen transformation microbial communities and N₂O reductase nosZ determines N₂O emission from CW. Hence, the selection of nitrate-loving plants will play an important role in inhibiting N₂O emission from CW.

The performance and microbial communities of Anammox and Sulfide-dependent autotrophic denitrification coupling system based on the gel immobilization

Anammox and sulfide-dependent autotrophic denitrification (ASDAD) coupling system can improve the nitrogen removal, but high sulfide concentration will affect the activity of anaerobic ammonia-oxidizing bacteria (AnAOB). Gel immobilization technology can enhance the survivability of microorganisms in unsuitable environments. Therefore, in this investigation, gel immobilization technology was applied into the ASDAD coupling system to explore the removal performance and microbial communities. The results showed that the optimal S^2-/NO₃^- was 0.6, under which the best TN removal efficiency was 85.69%. The removal performance of ASDAD coupling system was stable under rapid variations of nitrogen loading rate and sulfide loading rate. Immobilized sludge cubes could attenuate the effects of temperature on AnAOB and sulfide-oxidizing bacteria. Observations of SEM and stereoscope suggested that AnAOB was more likely to exist on the surface of the sludge cubes. Thiobacillus, Candidatus Brocadia, and Candidatus Kuenenia were the main functional bacteria in the coupling system.

A collaborative strategy for enhanced anaerobic co-digestion of food waste and waste activated sludge by using zero valent iron and ferrous sulfide

The application of sulfidated zero-valent iron as an alternative used in coupled anaerobic systems to improve methane production is usually restricted by its high production costs and toxic gasses and wastewater generation. In this study, a collaborative strategy for coupling zero-valent iron (ZVI) and ferrous sulfide (FeS) together into anaerobic systems was used to evaluate the enhancement of methanogenesis during the co-digestion of food waste and waste activated sludge, with the microbial evolution and metabolic pathway revealed. Results showed that the enhanced hydrolysis and acidogenesis process of co-digestion in this coupled anaerobic system could be attributed to synergistic interactions among ZVI, FeS, and microorganisms. Furthermore, both acetoclastic and hydrogenotrophic pathways could be promoted by coupling ZVI and FeS. This study demonstrated that coupling ZVI and FeS together into anaerobic systems would be a promising method for improving the methanogenic performance for municipal solid waste treatment.

A feasibility study of metal sulfide (FeS and MnS) on simultaneous denitrification and chromate reduction

Metal sulfide-based biological process is considered as a promising biotechnology for next-generation wastewater treatment. However, it is not clear if simultaneous bio-reduction of nitrate and chromate was achievable in this process. This study aimed to evaluate the feasibility of metal sulfides (FeS and MnS) on simultaneous denitrification and chromate reduction in autotrophic denitrifying column bioreactors. Results showed that simultaneous reduction of nitrate and chromate was achieved using metal sulfides (FeS and MnS) as electron donors, in which sulfate was the sole soluble end-product. Apart from the sulfur element in the metal sulfides, Fe(II) and Mn(II) were also involved in nitrate and chromate reduction as indicative by the formation of their oxidative states compounds. In microbial communities, SHD-231 and Thiobacillus were the most predominant bacteria, which might have played important roles in simultaneous denitrification and chromate reduction. Compared to FeS, MnS showed a higher performance on nitrate and chromate removal, which could also reduce the toxic inhibition of chromate on nitrate reduction. According to results of XRD and XPS, as well as a lower sulfate production in the FeS system, FeS might have been covered easily to hydroxides due to its bio-oxidation, which limited mass transfer efficiency and bio-availability of FeS. The findings in this study offered insights in the development of promising approaches for the treatment of toxic and hazardous compounds using metal sulfide.