Effects of virgin microplastics on the transport of Cd (II) in Xiangjiang River sediment

Biodegradable biopolymers: Real impact to environment pollution

Biobased biodegradable polymers (BBP) derived from different renewable resources are commonly considered as attractive alternative to petroleum-based polymers, such as polyethylene (PE), polypropylene (PP), polyethylene terephthalate (PET), etc. It is because they can address the issues of serious environmental problems resulted from accumulation of plastic wastes. In the review current methods of obtaining of most abundant BBP, polylactic acid (PLA) and polyhydroxybutyrate (PHB), have been studied with an emphasis on the toxicity of compounds used for their production and additives improving consumer characteristics of PLA and PHB based market products. Substantial part of additives was the same used for traditional polymers. Analysis of the data on the response of different organisms and plants on exposure to these materials and their degradation products confirmed the doubts about real safety of BBP. Studies of safer additives are scarce and are of vital importance. Meanwhile, technologies of recycling of traditional petroleum-based polymers were shown to be well-developed, which cannot be said about PLA or PHB based polymers, and their blends with petroleum-based polymers. Therefore, development of more environmentally friendly components and sustainable technologies of production are necessary before following market expansion of biobased biodegradable products.

Impact of polyamide microplastics on riparian sediment structures and Cd(II) adsorption: A comparison of natural exposure, dry-wet cycles, and freeze-thaw cycles

Microplastics (MPs) accumulation in sediments has posed a huge threat to freshwater ecosystems. However, it is still unclear the effect of MPs on riparian sediment structures and contaminant adsorption under different hydrological processes. In this study, three concentrations of polyamide (PA) MPs-treated sediments (0.1%, 1%, and 10%, w/w) were subjected to natural (NA) exposure, dry-wet (DW) cycles, and freeze-thaw (FT) cycles. The results indicated that PA MPs-added sediment increased the micro-aggregates by 10.1%-18.6% after FT cycles, leading to a decrease in aggregate stability. The pH, OM, and DOC of sediments were significantly increased in DW and FT treatments. In addition, the increasing concentration of PA MPs showed an obvious decrease in aromaticity, humification, and molecular weight of sediment DOM in FT treatments. Also, high level of MPs was more likely to inhibit the formation of humic-like substances and tryptophan-like proteins. For DW and FT cycles, 0.1% and 1% PA MPs-treated sediments slightly increased the adsorption capacity of Cd(II), which may be ascribed to the aging of MPs. Further correlation analysis found that DW and FT altered the link between DOM indicators, and aggregate stability was directly related to the changes in sediment organic carbon. Our findings revealed the ecological risk of MPs accumulating in riparian sediments under typical hydrological processes.

Microplastics distribution in river side bars: The combined effects of water level and wind intensity

Rivers are the main pathway for microplastics (MP) transport toward the ocean. However, the understanding of the processes involved in the deposition and mobilization of MP in rivers, specifically in sediment side bars (SB), remains very limited. The objectives of this study were: (i) to examine the effect of hydrometric fluctuations and wind intensity on the distribution of microplastics (MP < 5 mm) in the SB of large river (the Paraná River), (ii) to determine the characteristics of MP to infer their origin and fate, and (iii) to discuss potential similarities or differences between MP suspended in the water column and MP found in sediment. The SB and water column were sampled during the autumn, winter, and spring of 2018, and the summer of 2019 at different river discharges and wind intensities. >90 % of the MP items found were fiber of polyethylene terephthalate (PET; FT-IR analysis), the most common MP color was blue, and most were in the 0.5-2 mm size range. The concentration/composition of MP varied according to the river discharge and wind intensity. During the falling limb of the hydrograph when discharge is decreasing and sediments are exposed for short periods (13-30 days), MP particles transported by the flow were deposited on temporarily exposed SB, accumulating there in high densities (309-373 items/kg). However, during the drought, when sediments remained exposed for a long time (259 days), MP were mobilized and transported by the wind. During this period (no influence of the flow), MP densities significantly decreased on SB (39-47 items/kg). In conclusion, both hydrological fluctuations and wind intensity played a significant role in MP distribution in SB.

Impact of microplastics on lead-contaminated riverine sediments: Based on the enzyme activities, DOM fractions, and bacterial community structure

Microplastics (MPs) are able to interact with diverse contaminants in sediments. However, the impacts of MPs on sediment properties and bacterial community structure in heavy metal-contaminated sediments remain unclear. In this study, we investigated the adsorption of Pb(II) by sediment-MPs mixtures and the effects of different concentration MPs on sediment enzyme activities, DOM fractions, and Pb bioavailability in riverine sediments, and further explored the response of sediment microbial community to Pb in the presence of MPs. The results indicated that the addition of MPs significantly decreased the adsorption amount of Pb(II) by sediments, especially decreased by 12.6% at 10% MPs treatment. Besides, the changes in enzyme activities, DOM fractions exhibited dose-dependent effects of MPs. The higher level of MPs (5% and 10%) tends to transform Pb into more bioavailable fractions in sediments. Also, MPs amendment was observed to alter sediment bacterial community structures, and community differences were evident in the uncontaminated and lead-contaminated sediments. Therein, significant increase of Bacteroidota, Proteobacteria and decrease of Firmicutes abundance in Pb-contaminated sediment at the phylum level were observed. These findings are expected to provide comprehensive information for assessing the combined ecological risks of heavy metals and MPs in riverine sediments.

Effects of microplastics on nitrogen and phosphorus cycles and microbial communities in sediments

Sediments are the long-term sinks of microplastics (MPs) and nutrients in freshwater ecosystems. Therefore, understanding the effect of MPs on sediment nutrients is crucial. However, few studies have discussed the effects of MPs on nitrogen and phosphorus cycles in freshwater sediments. Herein, 0.5% (w/w) polyvinyl chloride (PVC), polylactic acid (PLA), and polypropylene (PP) MPs were added to freshwater sediments to evaluate their effects on microbial communities and nitrogen and phosphorus release. The potential biochemical functions of the bacterial communities in the sediments were predicted and assessed via 16S rRNA gene sequencing. The results showed that MPs significantly affected the microbial community composition and nutrient cycling in the sediments. PVC and PP MPs can promote microbial nitrification and nitrite oxidation, while PP can significantly promote alkaline phosphatase (ALP) activity and the abundance of the phosphorus-regulation (phoR) gene. PLA MPs had the potential to promote the abundance of microbial phosphorus transporter (ugpB), nitrogen fixation (nifD, nifH, and nifX), and denitrification (nirS, napA, and norB) genes and inhibit nitrification, resulting in massive accumulation and release of ammonia nitrogen. Although PLA MPs inhibited the activity of ALP and the abundance of the organophosphorus mineralization (phoD) gene, it could enhance dissimilatory iron and sulfite reduction, which may promote the release of sedimentary phosphorus. Our findings may help understand the mechanisms of nitrogen and phosphorus cycles and microbial communities driven by MPs in sediments and provide a basis for future assessments of the environmental behavior of MPs in freshwater ecosystems.

Estimation of contamination level in microplastic-exposed crayfish by laser confocal micro-Raman imaging

Crayfish is one of the most important freshwater aquaculture species in China. The potential risks of crayfish consumption caused by environmental microplastic pollution have attracted much attention. In this study, a total of 72 crayfish samples were exposed to the microplastic concentrations of 1 mg/L, 3 mg/L, and 9 mg/L for 7, 14, and 28 days, and microplastic contamination levels in crayfish were then explored by laser confocal micro-Raman (LCM-Raman) imaging and scanning electron microscope (SEM). LCM-Raman imaging showed better performance in microplastics identification. Besides, the average percentage of the contaminated area in visualized LCM-Raman images was used to quantitatively assess contamination levels. Following 28 days of exposure to 9 mg/L microplastics, microplastic accumulation reached about 13,000 particles per crayfish. The results confirmed that LCM-Raman imaging combined with image processing technology could be used to construct a high-performance analytical strategy for the assessment of microplastic contamination in crayfish.

Distinct adverse outcomes and lipid profiles of erythrocytes upon single and combined exposure to cadmium and microplastics

The growing accumulation of environmental microplastics (MPs) has become a global concern. MPs are capable to interact with other environmental contaminants leading to altered toxicity. Red blood cells (RBCs), are the target with highest priority for most of toxic xenobiotics after entering blood stream. Whether co-existence of MPs changes the toxicity of cadmium, a typical hemolysis inducer, in RBCs is unknown. We investigated the adverse effects of CdCl₂ and Polystyrene-MPs (PS-MPs) on RBCs in mice. We found that CdCl₂ induced mild microcytic hypochromic anemia while PS-MPs induced polycythemia vera, indicating distinct outcomes between them. Moreover, co-treatment of PS-MPs with CdCl₂ did not change the phenotype of microcytic hypochromic anemia, indicating an antagonistic relationship between CdCl₂ and PS-MPs. However, the lipid profiles were also distinct between single exposure and combined exposure to CdCl₂ and PS-MPs. The significant changed lipids were mainly involved in altering the physiochemical or biological properties of RBCs, including decreased membrane components, disrupted bilayer thickness and intrinsic lipid curvature. These results indicated impaired membrane functions of RBCs. The altered lipid profiles observed in the current study may represent new and previously unrecognized harmful characteristics of cadmium and MPs on erythrocytes at low dose without apparent induction of anemia.

Do poly(lactic acid) microplastics instigate a threat? A perception for their dynamic towards environmental pollution and toxicity

Fears concerning microplastics (MPs) environmental fate and persistence are progressively expanding on a global basis, with the emphasis given to manufacturing bioplastics for substituting petro-derived plastics extensively growing. Among them, poly(lactic acid) (PLA) holds a pioneering role towards the replacement of conventional polymeric materials, owing to its multifunctional properties, enclosing superior mechanical properties, low cost, renewability, great biocompatibility, transparency, and thermoplasticity launching many fields of application. Due to the wide applicability of PLA in several sectors of everyday life, its waste to be released into the environment is expected to follow a growing tendency during the upcoming years. Even though PLA is a biodegradable polyester, it actually degrades under specific composting environments, including a rich oxygen environment with high temperatures (58-80 °C), high humidity (>60% moisture) as well as the presence of micro-organisms (thermophilic bacteria). Additionally, in various studies it has been implied that PLA displays slower degradation performance when found in blends with other conventional polymers, underlining the unspecified effects on PLA degradation profile, keeping thus the information about PLA degradation from a blur standpoint. Therefore, a deepened understanding of the fate and dynamic effects of PLA MPs is of primary importance. Nevertheless, the current examination of the effects of PLA MPs in terms of sorption capacities and toxicity is so far limited and broadly unexplored since the current scientific emphasis has been merely centered on the conventional MPs' behavior. In this light, the present review provides an inclusive overview of the ongoing research of poly(lactic acid) in the framework of microplastics' pollution, while the future trends and missing points in this context are highlighted.

The role of microplastics in altering arsenic fractionation and microbial community structures in arsenic-contaminated riverine sediments

The ability of microplastics (MPs) to interact with environmental pollutants is of great concern. Riverine sediments, as sinks for multi-pollutants, have been rarely studied for MPs risk evaluation. Meanwhile, MPs generated from biodegradable plastics are questioning the safety of the promising materials. In this study, we investigated the effects of typical non-degradable polyethylene (PE) and biodegradable polylactic acid (PLA) MPs on sediment enzymes, arsenic (As) fractionation, and microbial community structures in As-contaminated riverine sediments. The results indicated that the presence of MPs (1% and 3%, w/w) led As transformed into more labile and bioavailable fractions in riverine sediments, especially under higher As and MPs levels. Analysis on microbial activities and community structures confirmed the strong potential of MPs in inhibiting microbial activities and shifting bacterial community succession patterns through enrichment of certain microbiota. Moreover, biodegradable PLA MPs presented stronger alterations in arsenic fractionation and microbial community structures than PE MPs did, which might be jointly attributed to adsorption behaviors, microbial alterations, and potential PLA degradation behaviors. The study indicated that MPs contamination increased As mobility and bioavailability, and shifted microbial communities in riverine sediments. Moreover, biodegradable MPs might lead to stronger microbial alterations and increases in As bioavailability, acting as a threat to ecological safety, which needed further exploration.