Magnetically modified in-situ N-doped Enteromorpha prolifera derived biochar for peroxydisulfate activation: Electron transfer induced singlet oxygen non-radical pathway

Dissecting the ecological risks of sulfadiazine degradation intermediates under different advanced oxidation systems: From toxicity to the fate of antibiotic resistance genes

The incomplete degradation of antibiotics in water can produce intermediates that carry environmental risks and thus warrant concerns. In this study, the degradation of high concentrations of antibiotic sulfadiazine (SDZ) by advanced oxidation processes that leverage different reactive oxide species was systematically evaluated in terms of the influence of different degradation intermediates on the propagation of antibiotic resistance genes (ARGs). The ozone, persulfate, and photocatalytic oxidation systems for SDZ degradation are dominated by ozone, direct electron transfer, and singlet oxygen, hole, and superoxide radicals, respectively. These processes produce 15 intermediates via six degradation pathways. Notably, it was determined that three specific intermediates produced by the ozone and persulfate systems were more toxic than SDZ. In contrast, the photocatalytic system did not produce any intermediates with toxicity exceeding that of SDZ. Microcosm experiments combined with metagenomics confirmed significant changes in microbiota community structure after treatment with SDZ and its intermediates, including significant changes in the abundance of Flavobacterium, Dungenella, Archangium, and Comamonas. This treatment also led to the emergence of sulfonamide ARGs. The total abundance of sulfonamide ARGs was found to be positively correlated with residual SDZ concentration, with the lowest total abundance observed in the photocatalytic system. Additionally, the correlation analysis unveiled microbiota carrying sulfonamide ARGs.

Knowledge graph and development hotspots of biochar as an emerging aquatic antibiotic remediator: A scientometric exploration based on VOSviewer and CiteSpace

As an emerging material in the field of environmental remediation, biochar produced by carbonisation of organic solid waste has been widely used in the remediation of antibiotic wastewater due to its environmental friendliness and excellent adsorption properties. This study analyses the current literature in the field in a comprehensive and scientific manner using CiteSpace and VOSviewer technologies. Between 2011 and 2023, a total of 1162 papers were published in this domain, spanning three distinct stages: applied methods, mechanism investigation, and enhanced improvement. The results of keyword clustering indicate that the remediation of antibiotics complexed with multiple pollutants by biochar is the main research topic, followed by the remediation of antibiotics by biochar in combination with other technologies. Furthermore, drawing from current research hotspots in antibiotic remediation using biochar, this study identified the pivotal mechanisms involved: (1) The primary mechanisms by which raw biochar remediates antibiotics include π-π electron donor-acceptor interactions, hydrophobic interactions, electrostatic interactions, hydrogen-bonding, and pore filling. (2) Steam activation, acid/base, metal salt/metal oxide, and clay mineral modification can improve the physical/chemical properties of biochar, enhancing its adsorptive removal of antibiotics. (3) Biochar activated persulfate and degraded antibiotics via free radical pathways (SO4-•, •OH and O2-•) as well as non-free radical pathways (1O2 and electron transfer). In addition, the challenge and prospect of biochar engineering applications for antibiotic remediation lies in improving the main mechanism of antibiotic remediation by biochar. The prospective utilization of biochar in enhancing the remediation of antibiotic-related pollutants holds tremendous value for the future.

Revealing the synergistic effect between radical and non-radical species of sulfur-doped carbon nitride for ciprofloxacin removal: Based on density functional theory study

The distinct characteristics of active species produced during the photocatalytic reaction can result in alterations in the degradation routes of organic pollutants with diverse chemical structures. The relationship between the active species and degradation pathways of organic pollutants lacks a direct experimental or characterization method, so in-depth research is still needed to understand the details of their interactions. In this study, sulfur-doped bulk carbon nitride (SBCN) was prepared based on bulk carbon nitride (BCN), and the process of S-doping enhancing the production of O21 was revealed. Through the degradation experiment, the degradation rate of CIP by SBCN reached 91 %, which was higher than that of BCN (66 %). The increase of degradation rate was mainly attributed to the increase of O21. Through the density functional theory (DFT) calculation of CIP and its degradation intermediate, due to the preferential oxidation of CIP by O21, O21 changes the initial degradation direction of CIP, releasing more attack sites for ˙O2-, thereby achieving more efficient degradation of CIP through the synergy of O21 and ˙O2-. In this study, the attack preferences of the active species and their synergistic promotion provide important insights for the efficient photocatalytic degradation of organic pollutants.

l-Cysteine and barium titanate co-modified enteromorpha biochar as effective peroxymonosulfate activator for atrazine treatment

In this study, pyrolysis and hydrothermal methods were used for Enteromorpha biochar that was co-modified with l-cysteine and barium titanate (LBCBa). It has great environmental tolerance and can remove 93.0 % of atrazine (ATZ, 10 mg·L-1) within 60 mins of ultrasonic treatment. The enhanced hydrophilicity, electron-donating capability, and piezoelectricity of LBCBa are considered to induce excellent performance. The apparent reaction rate of the LBCBa-2/PMS/ATZ system with ultrasonic was 2.87 times that without ultrasonic. The density functional theory points out that, introducing l-cysteine to carbon edges improves the adsorption of ATZ and peroxymonosulfate (PMS), making PMS easier to activate. This work offered unique insights for fabricating effective catalysts and demonstrated the combination of hydrophilic functional groups and piezoelectricity in improving catalytic performance and stability.

Magnetized algae catalyst by endogenous N to effectively trigger peroxodisulfate activation for ultrafast degraded sulfathiazole: Radical evolution and electron transfer

An innovative Fe-N co-coupled catalyst MN-2 was prepared from waste spirulina by co-pyrolysis as a highly active carbon-based catalyst for the activation of peroxydisulfate (PDS) for the degradation of sulfathiazole (ST). The protein-rich raw material Spirulina provided sufficient N during the pyrolysis process, thus achieving N doping without an additional nitrogen source, optimizing the interlayer structure of the biochar material and effectively inhibiting the leaching of the ligand metal Fe. MN-2 showed highly efficient catalytic activity for peroxydisulfate (PDS), with a degradation efficiency of 100% for ST within 30 min and a kinetic constant (kobs) reached 0.306 min-1, benefiting from the excellent adsorption ability of MN-2 forming MN-2-PDS* complexes and the electron transfer process generated by Fe3+ and Fe2+ cycling, oxygen-containing functional groups. The effects of PDS dosage, initial pH and coexisting anions on the oxidation process were also investigated. Free radical quenching, electron paramagnetic resonance and electrochemical measurements were employed to explain the hydroxyl (·OH) and sulfate (SO4·-) as the dominant active species and the electron transfer effect on the removal of ST. MN-2 maintained a ST removal rate of 84% after four recycling experiments, showing a high reusability performance. This work provides a simple way to prepare magnetized N-doped biochar, a novel catalyst (MN-2) for efficient activation of PDS for ST degradation, and a feasible method for removing sulfanilamide antibiotics in water environment.

Piezoelectricity ameliorates high-valent iron oxo species production in peroxymonosulfate activation for refractory atrazine remediation

Over the past few years, high-valent iron oxo species (Fe(IV)) have shown considerable promise. However, an improved solution is needed for the bottleneck of unsatisfactory electron transfer efficiency in Fe-based catalyst/PMS systems. In this study, Enteromorpha-derived biochar was pyrolyzed with iron and barium titanate (FeBCBa). Under ultrasonic treatment, it removes 94.5% of atrazine (10 mg/L) within 60 min, and is environmentally friendly. BaTiO3's piezoelectricity enhances Fe(IV) production in FeBCBa, resulting in superior performance. In the ultrasonic condition, the apparent reaction rate was 1.42 times higher than in the non-ultrasonic condition. Using density functional theory calculations, it can be shown that due to the Fe dopant, electrons in ATZ's LUMO are more easily transferred to the catalyst's HOMO, which is beneficial for ATZ removal. The results of this study provide new guidance for constructing stable and efficient catalysts for environmental remediation.

Recycling waste iron-rich algal flocs as cost-effective biochar activator for heterogeneous Fenton-like reaction towards tetracycline degradation: Important role of iron species and moderately defective structures

Harvesting aquatic harmful algal blooms (HABs) and reusing them is a promising way for antibiotic degradation. Herein, a novel iron-rich biochar (Fe-ABC), derived from algal biomass harvested by magnetic coagulation, was successfully designed and fabricated as activator for heterogeneous Fenton-like reaction. The modification methods and pyrolysis temperatures (400-800 °C) were optimized to enhance the formation of rich iron species and moderately defective structure, yielding Fe-ABC-600 with enhanced electron transfer and H2O2 activation capability. Thus, Fe-ABC-600 exhibited superior removal efficiency (95.33%) on tetracycline (TC), where the presence of multiple iron species (Fe3+, Fe2+ and Fe4+) and moderately defective structure accelerating the Fenton-like oxidation. The concentration of leaching Fe after each reaction was all below 0.74 mg/L in five cycles, ensuring the sustained degradation. And •OH was proved to be the major radical contributing to the degradation of TC, as well as the direct electron transfer mechanism together, in which the CO acted as electron regulator and electron donor. Fe-ABC as a cost-effective catalyst has notable application potentials in TC removal from wastewater owing to its remarkable advantages of high resource utilization, enhanced catalytic property, high ecological safe, notable TC degradation efficiency, low cost and environmental-friendliness.

N,S-codoped biochar outperformed N-doped biochar on co-activation of H2O2 with trace dissolved Fe(Ⅲ) for enhanced oxidation of organic pollutants

Co-activation of H2O2 with biochar and iron sources together provides an attractive strategy for efficient removal of refractory pollutants, because it can solve the problems of slow Fe(Ⅱ) regeneration in Fenton/Fenton-like processes and of low •OH yield in biochar-activated process. In this study, a wood-derived biochar (WB) was modified by heteroatom doping for the objective of enhancing its reactivity toward co-activation of H2O2. The performance of the co-activated system using doped biochars and trace dissolved Fe(Ⅲ) on oxidation of organic pollutants was evaluated for the first time. The characterizations using X-ray photoelectron spectroscopy (XPS), Raman spectra and electrochemical analyses indicate that heteroatom doping introduced more defects in biochar and improved its electron transfer capacity. The oxidation experiments show that heteroatom doping improved the performance of biochar in the co-activated process, in which the N,S-codoped biochar (NSB) outperformed the N-doped biochar (NB) on oxidation of pollutants. The reaction rate constant (kobs) for oxidation of sulfadiazine in NSB + Fe + H2O2 is 2.25 times that in NB + Fe + H2O2, and is 72.9 times that in the Fenton-like process without biochar, respectively. The mechanism investigations indicate that heteroatom doping enhanced biochar's reactivity on catalyzing the decomposition of H2O2 and on reduction of Fe(Ⅲ) due to the improved electron transfer/donation capacity. In comparison with N-doping, N,S-codoping provided additional electron donor (thiophenic C-S-C) for faster regeneration of Fe(Ⅱ) with less amount of doping reagent used. Furthermore, co-activation with NSB maintained to be efficient at a milder acidic pH than Fenton/Fenton-like processes, and can be used for oxidation of different pollutants and in real water. Therefore, this research provides a novel, sustainable and cost-efficient method for oxidation of refractory pollutants.

Degradation of oxytetracycline by iron-manganese modified industrial lignin-based biochar activated peroxy-disulfate: Pathway and mechanistic analysis

In this study, high-performance Fe-Mn-modified industrial lignin-based biochar (FMBC) was successfully prepared to facilitate the efficient degradation of oxytetracycline by its driven sulfate radical-based advanced oxidation process with 90% degradation within 30 min. The results showed that oxygenated functional groups (e. g. hydroxyl, carbonyl, etc.) in industrial lignin-based biochar, the synergistic effect of transition metals Fe and Mn, and defective structures were the active sites for activation of peroxy-disulfate. SO₄^·- produced during the degradation process assumed a key function. Significantly, 38 intermediates were innovatively proposed for the first time in the system, and oxytetracycline was degraded in 7 ways, including deamidation, demethylation, hydroxylation, secondary alcohol oxidation, ring opening, dehydration, and carbonylation. A new perspective on the application of industrial lignin in the advanced oxidative degradation of organic pollutants was provided by this study.

Regulating the concentration of dissolved oxygen to achieve the directional transformation of reactive oxygen species: A controllable oxidation process for ciprofloxacin degradation by calcined CuCoFe-LDH

Different reactive oxygen species (ROS) tend to attack specific sites on pollutants, leading to the formation of intermediates with different toxic effects. Therefore, regulating the directional transformation of ROS is a new effective approach for safe degradation of refractory organic compounds in wastewater. However, the regulation mechanism and transformation path of ROS remain unclear. In this work, the dissolved oxygen (DO) content was controlled by aeration to generate different ROS through the activation of O₂ on the calcined CuCoFe-LDH (CuCoFe-300). ROS quantitative experiments and electron paramagnetic resonance proved that O₂ was mainly activated to superoxide radical (•O₂^-) and singlet oxygen (¹O₂) under low DO concentration (0.231 mmol/L) (O₂ → •O₂^- → ¹O₂). With the increasing of DO concentration (0.606 mmol/L), O₂ was inclined to convert into hydroxyl radicals (•OH) (O₂ → •O₂^- → H₂O₂ → •OH). The density functional theory and function model of active sites utilization and DO concentration built a solid proof for ROS conversion mechanism that increasing the DO concentration promotes the increase of active sites utilization on the CuCoFe-300 system. That is, the •O₂^- was more prone to convert to •OH, not ¹O₂ in thermodynamics under high active sites utilization condition. Hence, the ROS generation was controlled by regulating DO concentration, and the nontoxic degradation pathway of ciprofloxacin was well-designed. This work is dedicated to the in-depth exploration of the mechanism between DO concentration and ROS conversion, which provides an extremely flexible, low energy consumption, and environmentally friendly wastewater treatment method in a new perspective.

Supporting nanoscale zero-valent iron onto shrimp shell-derived N-doped biochar to boost its reactivity and electron utilization for selenite sequestration

Nanoscale zero-valent iron (nZVI) has been widely used in the reductive removal of contaminants from water, yet it still fights against the inherent passive cover and the raise of medium pH. In this study, nZVI was supported onto a nitrogen-doped biochar (NBC) that was prepared by pyrolyzing shrimp shell for efficiently sequestrating aqueous selenite (Se(IV)). The resultant composite (NBC-nZVI) revealed a higher reactivity and electron utilization efficiency (EUE) than the bare nZVI in Se(IV) sequestration because of the positive charge, the buffering effect and the good conductivity of NBC. The kinetic rate and EUE of NBC-nZVI were increased by 143.4% and 15.3% compared to the bare nZVI, respectively, at initial pH of 3.0. The high removal capacity of 605.4 mg g^-1 for NBC-nZVI was obtained at Se(IV) concentration of 1000 mg L^-1, initial pH of 3.0, NBC-nZVI dosage of 1.0 g L^-1 and contact time of 12 h. Moreover, NBC-nZVI exhibited a strong tolerance to solution pHs and coexisting compounds (e.g., humic acid) and could reduce the Se(IV) concentration from 5.0 mg L^-1 to below the limit of drinking water (50 μg L^-1) in real-world samples. This work exemplified a utilization of shrimp shell-derived NBC to simultaneously enhance the reactivity and EUE of nZVI for reductively removing contaminants.

Bibliometrics Analysis of Research Progress of Electrochemical Detection of Tetracycline Antibiotics

Tetracycline is a broad-spectrum class of antibiotics. The use of excessive doses of tetracycline antibiotics can result in their residues in food, posing varying degrees of risk to human health. Therefore, the establishment of a rapid and sensitive field detection method for tetracycline residues is of great practical importance to improve the safety of food-derived animal foods. Electrochemical analysis techniques are widely used in the field of pollutant detection because of the simple detection principle, easy operation of the instrument, and low cost of analysis. In this review, we summarize the electrochemical detection of tetracycline antibiotics by bibliometrics. Unlike the previously published reviews, this article reviews and analyzes the development of this topic. The contributions of different countries and different institutions were analyzed. Keyword analysis was used to explain the development of different research directions. The results of the analysis revealed that developments and innovations in materials science can enhance the performance of electrochemical detection of tetracycline antibiotics. Among them, gold nanoparticles and carbon nanotubes are the most used nanomaterials. Aptamer sensing strategies are the most favored methodologies in electrochemical detection of tetracycline antibiotics.

Peroxydisulfate activation by nano zero-valent iron graphitized carbon materials for ciprofloxacin removal: Effects and mechanism

Since the discovery of the potential hazards of ciprofloxacin (CIP) to the ecosystem and human health, there has been an urgent need to develop effective technologies to solve the severe issue. In this work, the nanozero-valent iron graphitized carbon matrix (xFe@CS-T_m) were prepared via a hydrothermal method to activate peroxydisulfate (PDS) for degradation of CIP. Specifically, 0.5Fe@CS-T₇ exhibited the excellent catalytic performance for PDS activation to degrade CIP. Moreover, the catalyst exhibited vigorous interference resistance at various pH values, in the presence of various inorganic anions and under humic acid conditions. The characterization results demonstrated that Fe was successfully embedded on the carbon matrix and became the active sites to promote ROS production. It is demonstrated that O₂^•- was the main active species rather than •OH and SO₄^•-, based on quench trapping, EPR experiments and steady state concentrations calculations. The possible pathways of CIP degradation were proposed using LC-MS results and density functional theory. The outcomes of the toxicity estimation software tool found that the toxicity of CIP was reduced. This study not only investigated a novel methodology for the degradation of antibiotic wastewater but also provides a feasible pathway for carbon-neutral wastewater treatment.

Facile nitrogen doping in fungal hyphae-derived biochars via cooperation of microbial culture and pyrolysis for efficient catalytic reduction of 4-nitrophenol

Manipulating the elemental composition is one major strategy to tune the properties of biochars to endow different functions to meet various application requirements. Compared with the widely reported plants- and manure-based precursors for biochars, microbes-based precursors take the lead in regional independency, rapid growth, morphology uniformity and abundant species with different adjustable elemental composition. In this work, fungal hyphae with massive microtubule structure were selected as a typical microbe precursor to prepare biochars whose catalysis capability was further evaluated by a representative reduction reaction of 4-nitrophenol (4-NP) using sodium borohydride as reductant. By simply increasing the nitrogen concentration in the culturing medium, the fungal hyphae derived biochars with increased nitrogen contents (2.1 wt% → 4.3 wt%) were successfully obtained after pyrolysis, showing almost two times higher catalysis ability (4.75 × 10^-2 s^-1 → 7.26 × 10^-2 s^-1) towards 4-nitrophenol. The Arrhenius equation calculation further proved that the more doping of nitrogen would increase the active sites rather than altering the reaction pathway. A high surface area of 997 m² g^-1 at pyrolysis temperature of 800 °C was obtained resulting from the fine microstructure of fungal hyphae. Higher pyrolysis temperature derived biochars remarkably promote their catalysis ability. These results indicated that biochars with controllable nitrogen contents can be prepared by cooperating culturing and pyrolysis processes, which pointed out an easy, rapid, scalable, and promising way to synthesis biochars with tunable functions for different applications.

Boron regulates catalytic sites of biochar to enhance the formation of surface-confined complex for improved peroxydisulfate activation

Biochar has been developed to activate persulfate for wastewater treatment due to its carbon essence, easily-available and low-cost. Efficiently active sites and interfacial electron transfer are highly desired for peroxydisulfate (PDS) activation. In this study, boronic ester structure and defect degree of boron-doped biochar are confirmed as activate sites to improve PDS activation. The performance of pollutants degradation is proven to have structure-activity relationships with both activate sites. Moreover, boron-doped biochar exhibits higher stability and oxidation potential by forming the surface-confined complex, promoting electron transfer from pollutants to complex. The optimized boron-doped biochar has the advantages of adapting to a broad pH range (2.9-10.0), strong resistance to Cl^- and organic matters, a low activation energy of 11.22 kJ mol^-1, and achieving the decomposition of practical dyeing wastewater. Our work provides a promising approach to regulating the interfacial catalytic sites of biochar by doping heteroatom for PDS activation in practical wastewater treatment.