Alkylpolyglycoside modified MnFe2O4 with abundant oxygen vacancies boosting singlet oxygen dominated peroxymonosulfate activation for organic pollutants degradation

Activation of PAA at the Fe-Nx Sites by Boron Nitride Quantum Dots Enhanced Charge Transfer Generates High-Valent Metal-Oxo Species for Antibiotics Degradation

Advanced oxidation processes (AOPs) based on peracetic acid (PAA) offer a promising strategy to address antibiotic wastewater pollution. In this study, Fe-doped graphitic carbon nitride (g-C3N4) nanomaterials were used to construct Fe-Nx sites, and the electronic structure was tuned by boron nitride quantum dots (BNQDs), thereby optimizing PAA activation for the degradation of antibiotics. The BNQDs-modified Fe-doped g-C3N4 catalyst (BNQDs-FCN) achieved an excellent reaction rate constant of 0.0843 min-1, marking a 21.6-fold improvement over the carbon nitride (CN)-based PAA system. DFT calculations further corroborate the superior adsorption capacity of the Fe-Nx sites for PAA, facilitating its activation. Charge transfer mechanisms, with PAA serving as an electron acceptor, were identified as the source of high-valent iron-oxo species. Moreover, the BNQDs-FCN system preferentially targets oxygen-containing functional groups in antibiotic structures, elucidating the selective attack patterns of these highly electrophilic species. This research not only elucidates the pivotal role of high-valent iron-oxo species in pollutant degradation within the PAA-AOPs framework but also pioneers a wastewater treatment system characterized by excellent degradation efficiency coupled with low ecological risk, thereby laying the groundwork for applications in wastewater management and beyond.

Peroxymonosulfate activation by cobalt-doped ferromanganese magnetic oxides through singlet oxygen and radical pathways for efficient sulfadiazine degradation

In this paper, cobalt-doped MnFe2O4 (CMFO-0.4) with oxygen vacancies was successfully synthesised by the sol-gel method and applied as a high-performance catalyst for the activation of peroxomonosulfate (PMS). The catalyst showed an excellent catalytic effect for the degradation of sulfadiazine (SDZ) by activated PMS, and the degradation rate can reach 100% in 10 minutes. The effects of different conditions on the degradation of SDZ were investigated, and it was determined that the optimal concentrations of catalyst and PMS were 0.2 g L-1 and 1 mM, respectively, and had good degradation effects in the pH 5-11 range. Free radical quenching experiments, XPS, and electron paramagnetic resonance (EPR) analyses revealed the presence of hydroxyl radicals (˙OH), sulphate radicals (SO4˙-), singlet oxygen (1O2), and superoxide radicals (˙O2 -) in the CMFO-0.4/PMS system, with 1O2 being the main reactive oxygen species (ROS). In addition, CMFO-0.4 has good reusability and adaptability to the presence of other substances.

Size-Dependent Catalysis in Fenton-like Chemistry: From Nanoparticles to Single Atoms

State-of-the-art Fenton-like reactions are crucial in advanced oxidation processes (AOPs) for water purification. This review explores the latest advancements in heterogeneous metal-based catalysts within AOPs, covering nanoparticles (NPs), single-atom catalysts (SACs), and ultra-small atom clusters. A distinct connection between the physical properties of these catalysts, such as size, degree of unsaturation, electronic structure, and oxidation state, and their impacts on catalytic behavior and efficacy in Fenton-like reactions. In-depth comparative analysis of metal NPs and SACs is conducted focusing on how particle size variations and metal-support interactions affect oxidation species and pathways. The review highlights the cutting-edge characterization techniques and theoretical calculations, indispensable for deciphering the complex electronic and structural characteristics of active sites in downsized metal particles. Additionally, the review underscores innovative strategies for immobilizing these catalysts onto membrane surfaces, offering a solution to the inherent challenges of powdered catalysts. Recent advances in pilot-scale or engineering applications of Fenton-like-based devices are also summarized for the first time. The paper concludes by charting new research directions, emphasizing advanced catalyst design, precise identification of reactive oxygen species, and in-depth mechanistic studies. These efforts aim to enhance the application potential of nanotechnology-based AOPs in real-world wastewater treatment.

Activating peroxymonosulfate with Fe-doped biochar for efficient removal of tetracycline: Dual action of reactive oxygen species and electron transfer

If pharmaceutical wastewater is not managed effectively, the presence of residual antibiotics will result in significant environmental contamination. In addition, inadequate utilization of agricultural waste represents a squandering of resources. The objective of this research was to assess the efficacy of iron-doped biochar (Fe-BC) derived from peanut shells in degrading high concentrations of Tetracycline (TC) wastewater through activated peroxymonosulfate. Fe-BC demonstrated significant efficacy, achieving a removal efficiency of 87.5% for TC within 60 min without the need to adjust the initial pH (20 mg/L TC, 2 mM PMS, 0.5 g/L catalyst). The degradation mechanism of TC in this system involved a dual action, namely Reactive Oxygen Species (ROS) and electron transfer. The primary active sites were the Fe species, which facilitated the generation of SO4•-, •OH, O2•-, and 1O2. The presence of Fe species and the C=C structure in the Fe-BC catalyst support the electron transfer. Degradation pathways were elucidated through the identification of intermediate products and calculation of the Fukui index. The Toxicity Estimator Software Tool (T.E.S.T.) suggested that the intermediates exhibited lower levels of toxicity. Furthermore, the system exhibited exceptional capabilities in real water and circulation experiments, offering significant economic advantages. This investigation provides an efficient strategy for resource recycling and the treatment of high-concentration antibiotic wastewater.

Degradation of 2, 4-dichlorophenol by peroxymonosulfate catalyzed by ZnO/ZnMn2 O4

In this study, a highly efficient peroxymonosulfate (PMS) activator, ZnO/ZnMn2 O4 , was synthesized using a simple one-step hydrothermal method. The resulting bimetallic oxide catalyst demonstrated a homogenous and high-purity composition, showcasing synergistic catalytic activity in activating PMS for degrading 2, 4-dichlorophenol (2, 4-DCP) in aqueous solution. This catalytic performance surpassed that of individual ZnO, Mn2 O3 , and ZnMn2 O4 metal materials. Under the optimized conditions, the removal efficiency of 2, 4-DCP reached approximately 86% within 60 min, and the catalytic ability remained almost constant even after four cycles of recycling. The developed degradation system proved effective in degrading other azo-dye pollutants. Certain inorganic anions such as HPO4 - , HCO3 - , and NO3 - significantly inhibited the degradation of 2, 4-DCP, while Cl- and SO4 2- did not exhibit such interference. Results from electrochemical experiments indicated that the electron transfer ability of ZnO/ZnMn2 O4 surpassed that of individual metals, and electron transfer occurred between ZnO/ZnMn2 O4 and the oxidant. The primary active radicals responsible for degrading 2, 4-DCP were identified as SO4 •- , OH• and O2 •- , generated through the oxidation and reduction of PMS catalyzed by Zn (II) and Mn (III). Furthermore, X-ray photoelectron spectroscopy (XPS) analysis of the fresh and used catalysts revealed that the exceptional electron transfer ability of ZnO facilitated the valence transfer of Mn (III) and the transfer of electrons to the catalyst's oxygen surface, thus enhancing the catalytic efficiency. The analysis of radicals and intermediates indicates that the two main pathways for degrading 2, 4-DCP involve hydroxylation and radical attack on its aromatic ring. PRACTITIONER POINTS: A bimetallic ZnO/ZnMn2 O4 catalyst was synthesized and characterized. ZnO/ZnMn2 O4 can synergistically activate PMS to degrade 2, 4-DCP compared with single metal oxide. Three primary active radicals, O2 •- , • OH, and SO4 •- , were generated to promote the degradation. ZnO promoted electron transfer among the three species of Mn to facilitate oxidizing pollutants. Hydroxylation and radical attack on the aromatic ring of 2, 4-DCP are the two degradation pathways.

Singlet oxygen in the removal of organic pollutants: An updated review on the degradation pathways based on mass spectrometry and DFT calculations

The degradation of pollutants by a non-radical pathway involving singlet oxygen (1O2) is highly relevant in advanced oxidation processes. Photosensitizers, modified photocatalysts, and activated persulfates can generate highly selective 1O2 in the medium. The selective reaction of 1O2 with organic pollutants results in the evolution of different intermediate products. While these products can be identified using mass spectrometry (MS) techniques, predicting a proper degradation mechanism in a 1O2-based process is still challenging. Earlier studies utilized MS techniques in the identification of intermediate products and the mechanism was proposed with the support of theoretical calculations. Although some reviews have been reported on the generation of 1O2 and its environmental applications, a proper review of the degradation mechanism by 1O2 is not yet available. Hence, we reviewed the possible degradation pathways of organic contaminants in 1O2-mediated oxidation with the support of density functional theory (DFT). The Fukui function (FF, f-, f+, and f0), HOMO-LUMO energies, and Gibbs free energies obtained using DFT were used to identify the active site in the molecule and the degradation mechanism, respectively. Electrophilic addition, outer sphere type single electron transfer (SET), and addition to the hetero atoms are the key mechanisms involved in the degradation of organic contaminants by 1O2. Since environmental matrices contain several contaminants, it is difficult to experiment with all contaminants to identify their intermediate products. Therefore, the DFT studies are useful for predicting the intermediate compounds during the oxidative removal of the contaminants, especially for complex composition wastewater.

Generation and identification of 1O2 in catalysts/peroxymonosulfate systems for water purification

Catalysts for peroxymonosulfate (PMS) activation are appealing in the purification of organic wastewater. Singlet oxygen (1O2) is widely recognized as a crucial reactive species for degrading organic contaminants in catalysts/PMS systems due to its adamant resistance to inorganic anions, high selectivity, and broad pH applicability. With the rapid growth of studies on 1O2 in catalysts/PMS systems, it becomes necessary to provide a comprehensive review of its current state. This review highlights recent advancements concerning 1O2 in catalysts/PMS systems, with a primary focus on generation pathways and identification methods. The generation pathways of 1O2 are summarized based on whether (distinguished by the geometric structures of metal species) or not (distinguished by the active sites) the metal element is included in the catalysts. Furthermore, this review thoroughly discusses the influence of metal valence states and metal species with different geometric structures on 1O2 generation. Various potential strategies are explored to regulate the generation of 1O2 from the perspective of catalyst design. Identification methods of 1O2 primarily include electron paramagnetic resonance (EPR), quenching experiments, reaction in D2O solution, and chemical probe tests in catalysts/PMS systems. The principles and applications of these methods are presented comprehensively along with their applicability, possible disagreements, and corresponding solutions. Besides, an identifying procedure on the combination of main identification methods is provided to evaluate the role of 1O2 in catalysts/PMS systems. Lastly, several perspectives for further studies are proposed to facilitate developments of 1O2 in catalysts/PMS systems.

Dual Activation of Peroxymonosulfate Using MnFe2O4/g-C3N4 and Visible Light for the Efficient Degradation of Steroid Hormones: Performance, Mechanisms, and Environmental Impacts

Single activation of peroxymonosulfate (PMS) in a homogeneous system is sometimes insufficient for producing reactive oxygen species (ROS) for water treatment applications. In this work, manganese spinel ferrite and graphitic carbon nitride (MnFe2O4/g-C3N4; MnF) were successfully used as an activator for PMS under visible light irradiation to remove the four-most-detected-hormone-contaminated water under different environmental conditions. The incorporation of g-C3N4 in the nanocomposites led to material enhancements, including increased crystallinity, reduced particle agglomeration, amplified magnetism, improved recyclability, and increased active surface area, thereby facilitating the PMS activation and electron transfer processes. The dominant active radical species included singlet oxygen (1O2) and superoxide anions (O2•-), which were more susceptible to the estrogen molecular structure than testosterone due to the higher electron-rich moieties. The self-scavenging effect occurred at high PMS concentrations, whereas elevated constituent ion concentrations can be both inhibitors and promoters due to the generation of secondary radicals. The MnF/PMS/vis system degradation byproducts and possible pathways of 17β-estradiol and 17α-methyltestosterone were identified. The impact of hormone-treated water on Oryza sativa L. seed germination, shoot length, and root length was found to be lower than that of untreated water. However, the viability of both ELT3 and Sertoli TM4 cells was affected only at higher water compositions. Our results confirmed that MnF and visible light could be potential PMS activators due to their superior degradation performance and ability to produce safer treated water.

Prussian blue analogues derived magnetic FeCo@GC material as high-performance metallic peroxymonosulfate activators to degrade tetrabromobisphenol A over a wide pH range

Metal-organic frame (MOF) materials can effectively degrade organic pollutants, whereas the MOF is rapidly hydrolysed in water and has poor stability and low reusability. However, in the current advanced oxidation process (AOP) system, the removal effect of pollutants under alkaline condition is not ideal. In this study, a magnetic composite material derived from MOF was synthesised and used as a new catalyst for rapid degradation of tetrabromobisphenol A (TBBPA). Compared to precarbonisation, FeCo@GC formed a conductive graphite carbon skeleton, retained the complete rhombododecahedron structure, had a larger specific surface area and provided more active sites for peroxymonosulfate (PMS) activation. The target pollutant TBBPA (20 mg/L) was completely degraded within 30 min, and the mineralisation rate reached 40.98% in the FeCo@GC (150 mg/L) and PMS (1 mM) systems, owing to the synergistic interaction between Fe, Co and graphite carbon. The reactive oxygen species (ROS) involved in the reaction were determined to be SO4•-, ·OH, 1O2 and O2•- by electron paramagnetic resonance and free radical scavenging experiments, and the 1O2 played a dominant role. Based on the results of LC-MS analysis results, the main degradation pathways of TBBPA involve three mechanisms: the debromination reaction, hydroxylation and cleavage of the benzene ring. In addition, compared with previous AOP systems, FeCo@GC/PMS overcomes the disadvantage of poor degradation effect of TBPPA under alkaline conditions, has a wide range pH (3-11) application and has the best effect on TBBPA degradation under alkaline conditions. FeCo@GC has an excellent cycle performance, with a removal rate of re-calcined material of 88.52% after five cycles. Therefore, FeCo@GC can be used as a promising and efficient catalyst for removing environmental organic pollutants.

Applications of vacancy defect engineering in persulfate activation: Performance and internal mechanism

The vacancy defects in heterogeneous catalysts have received extensive attention for persulfate (PS) activation. Vacancy defects can tune the electronic structure of metal oxides and generate unsaturated coordination sites. Meanwhile, the adsorption energy of reactants on catalyst surface is optimized. Thereby, the reaction energy barrier between catalysts and PS decreases, which could promote catalytic activation and accelerate pollutants degradation. Nowadays, oxygen vacancy (OV), nitrogen vacancy (NV), sulfur vacancy (SV), selenium vacancy (SeV) and titanium vacancy (TiV) have been widely studied with great potential for water remediation. So far, no review was reported regarding the vacancy activated persulfate systems. This paper summarized the types, preparation, mechanism and applications of vacancy in PS systems systematically. In addition, we put forward possible development of vacancy engineering in PS activation systems. It is expected that this review will contribute to the controllable synthesis and applications of vacancies in catalysts for PS activation and contaminants removal.

Co3O4 with upshifted d-band center and enlarged specific surface area by single-atom Zr doping for enhanced PMS activation

In this work, single-atom Zr doping is demonstrated to be an effective strategy to enhance the catalytic performance of Co₃O₄ toward peroxymonosulfate (PMS) by modulating electronic structure and enlarging specific surface simultaneously. The d-band center of Co sites upshifts owing to different electronegativity of Co and Zr in the bonds of Co-O-Zr confirmed by density functional theory calculations, leading to enhanced adsorption energy of PMS and strengthened electron transfer from Co^(II) to PMS. The specific surface area of Zr-doped Co₃O₄ increases by 6 times due to the decrease of crystalline size. Consequently, the kinetic constant of phenol degradation with Zr-Co₃O₄ is 10 times higher than that with Co₃O₄ (0.31 vs. 0.029 min^-1). The relative surface specific kinetic constant of Zr-Co₃O₄ for phenol degradation is still 2.29 times higher than that of Co₃O₄ (0.00660 vs. 0.00286 g m^-2 min^-1). In addition, the potential practical applicability of 8Zr-Co₃O₄ was also confirmed by practical wastewater treatment. This study provides deep insights into modifying electronic structure and enlarging specific surface area to enhance the catalytic performance.

Embedding Co in perovskite MoO3 for superior catalytic oxidation of refractory organic pollutants with peroxymonosulfate

A cobalt (Co)-doped perovskite molybdenum trioxide (α-MoO₃) catalyst (Co-MO) was synthesized by a facile pyrolysis strategy and used for degrading various organic contaminants via peroxymonosulfate (PMS) activation. The doped Co was inserted in the inter space between the octahedron [MoO₆], facilitating the growth of the α-MoO₃ crystal on the [010] direction. This unique structure accelerated the activation of PMS as the Co-MO could function as a carrier for electron transfer to facilitate the Co(II)/Co(III) cycle in the Co-MO/PMS system. As a result, the Co-MO/PMS system showed noticeable activity for removing 100% bisphenol A (BPA) under a broad conditions within 30 min. The radical quenching test and electron paramagnetic resonance analysis revealed that singlet oxygen (¹O₂) was the main active species for BPA degradation in the Co-MO/PMS system, while free radicals, such as O₂^•-, SO₄^•- and •OH, were also produced as the intermediate species. Furthermore, the carrier mechanism may enable the Co-MO/PMS system maintain relatively high performance during repeat use, and also excellent adaptability was revealed by the well function in various water matrices and high activity in degrading various refractory organic pollutants. Our findings pave a useful avenue for the rational design of novel cobalt-doped catalysts with high catalytic performance toward wide environmental applications.

Oxygen vacancy-mediated peroxydisulfate activation and singlet oxygen generation toward 2,4-dichlorophenol degradation on specific CuO1-x nanosheets

Durable and stable removal of 2,4-dichlorophenpl (2,4-DCP) by CuO_1-x nanosheets is reported. CuO_1-x nanosheets were fabricated by a simple defect engineering strategy and greatly increased the efficiency of peroxydisulfate (PDS) activation to improve 2,4-DCP removal by introducing abundant oxygen vacancy (V_o) to produce an electron-rich surface. Results showed that CuO_1-x nanosheets exposed more V_o as active sites for PDS activation as compared with that of CuO nanoparticles, giving rise to dramatic enhancement of catalytic performance with ultrahigh reaction rate that is qualified for serving in flow filtration system, completely degrading 100 mg L^-1 of 2,4-DCP within 3 s of residence time. Besides, experimental studies confirmed that ¹O₂ generated by V_o - mediated PDS activation plays the dominate role in the degradation of contaminants. Relative to the previously reported CuO/PDS systems, the obtained CuO_1-x nanosheets demonstrated 2.7 times higher specific PDS activity and 67 times higher specific CuO activity for 2,4-DCP removal. Our study not only improves the fundamental understanding of active sites in morphologically tunable metal oxides but also proposes a guideline for future research and engineering application of persulfate.

Valorization of ball-milled waste red mud into heterogeneous catalyst as effective peroxymonosulfate activator for tetracycline hydrochloride degradation

Red mud (RM), a kind of iron-rich industrial waste produced in the alumina production process, can be utilized as a potential iron-based material for the removal of refractory organic pollutants from wastewater in advanced oxidation processes (AOPs). In this work, high-iron RM (rich in iron) was activated in a ball mill and applied as an effective activator of peroxymonosulfate (PMS) for tetracycline hydrochloride (TC-HCl) degradation. Compared with that of unmilled RM (69.7%), the TC-HCl decomposition ratios of ball-milled RM (BM-RM) (72.2%-92.0%) were all improved in the presence of PMS. Systematic characterization suggested that ball milling could optimize the physicochemical properties of RM, such as increased surface area, increased oxygen vacancies, enhanced electrical conductivity, and increased exposure of Fe(II) sites, all of which could effectively improve RM for PMS activation to degrade TC-HCl. The quenching experiments and electron paramagnetic resonance technique revealed that ¹O₂ and SO₄·^- contributed dominantly to the TC-HCl degradation. Ultra performance liquid chromatography mass spectrometry analysis combined with density functional theory calculation revealed that the degradation pathways of TC-HCl were driven by hydroxylation, N-demethylation and dehydration in BM-RM/PMS system. Based on quantitative structure-activity relationship prediction using the Toxicity Estimation Software Tool software, the toxicity of almost all intermediates was significantly reduced. An obvious inhibition effect on TC-HCl was occurred in the presence of Cl^-, whereas the presences of NO₃^- and SO₄^2- had little effect. However, HCO₃^- improved TC-HCl removal efficiency. BM-RM had a wide working pH range (pH = 3-11) and showed good stability and reusability in use. Overall, this work not only offers a simple and promising approach to improve the catalytic activity of RM, but also opens new insights into the ball-milled RM as an effective PMS activator for wastewater treatment.

Introduction of oxygen vacancy to manganese ferrite by Co substitution for enhanced peracetic acid activation and 1O2 dominated tetracycline hydrochloride degradation under microwave irradiation

High microwave-response cobalt-substituted manganese ferrite (CMFO-0.5) was successfully synthesized as a heterogeneous catalyst for efficient peracetic acid (PAA) activation and tetracycline hydrochloride (TCH) degradation with singlet oxygen (¹O₂) as the dominated reactive oxidized species (ROS). The removal efficiency of TCH could reach 98.16% within 6 min under microwave irradiation when the CMFO-0.5 was added at 20 mg/L. It's found that the Co substitution could produce the oxygen vacancies (OVs), improve the microwave (MW) absorbing performance and enhance the internal electron transfer efficiency of materials. The phenomenon why ¹O₂ as the dominated ROS rather than hydroxyl radical (•OH) and organic radicals (R-O•) would be explained by the following aspects: the oxygen adsorbed on the OVs can accept the electron transformed from PAA to form superoxide radical (•O₂^-), which will disproportionate to form ¹O₂; the energy generated by the non-thermal effect of MW can dissociate PAA to generate peroxy-group for ¹O₂ generation. Furthermore, the possible TCH degradation pathways were proposed based on DFT theory calculations and product identification, and the toxicity predictions of the degradation products were also performed by the Ecological Structure-Activity Relationship Model (ECOSAR) software. Additionally, the decrease of acute toxicity of treated TCH, excellent stability and strong resistance towards water matrix fully demonstrate the superiority of the proposed system for practical application in wastewater treatment.