Co/La modified Ti/PbO2 anodes for chloramphenicol degradation: Catalytic performance and reaction mechanism

Enhanced favipiravir drug degradation using the synergy of PbO2-based anodic oxidation and Fe-MOF-based cathodic electro-Fenton

Favipiravir (FAV) is a widely utilized antiviral drug effective against various viruses, including SARS-CoV-2, influenza, and RNA viruses. This article aims to introduce a novel approach, known as Linear-Paired Electrocatalytic Degradation (LPED), as an efficient technique for the electrocatalytic degradation of emerging pollutants. LPED involves simultaneously utilizing a carbon-Felt/Co-PbO2 anode and a carbon-felt/Co/Fe-MOF-74 cathode, working together to degrade and mineralize FAV. The prepared anode and cathode characteristics were analyzed using XPS, SEM, EDX mapping, XRD, LSV, and CV analyses. A rotatable central composite design-based quadratic model was employed to optimize FAV degradation, yielding statistically desirable results. Under optimized conditions (pH = 5, current density = 4.2 mA/cm2, FAV concentration = 0.4 mM), individual processes of cathodic electro-Fenton and anodic oxidation with a CF/Co-PbO2 anode achieved degradation rates of 58.9% and 89.5% after 120 min, respectively. In contrast, using the LPED strategy resulted in a remarkable degradation efficiency of 98.4%. Furthermore, a cyclic voltammetric study of FAV on a glassy carbon electrode was conducted to gather additional electrochemical insights and rectify previously published data regarding redox behavior, pH-dependent properties, and adsorption activities. The research also offers a new understanding of the LPED mechanism of FAV at the surfaces of both CF/Co-PbO2 and CF/Co/Fe-MOF-74 electrodes, utilizing data from cyclic voltammetry and LC-MS techniques. The conceptual strategy of LPED is generalizable in order to the synergism of anodic oxidation and cathodic electro-Fenton for the degradation of other toxic and resistant pollutants.

Construction of a Zero-gap Flow-Through Microfluidic Reactor with Porous RuO2 -IrO2 @Pt Anode for Electrocatalytic Oxidation of Antibiotics in Water

In this study, a zero-gap flow-through microfluidic reactor was constructed for the degradation of tetracycline and norfloxacin in water using a porous Ti/RuO2 -IrO2 @Pt electrode as the anode and porous titanium plate as the cathode. The operation parameters included electrolyte type, electrolyte concentration, current density, initial concentration of pollutants and pH, were investigated. The degradation efficiency and energy consumption were calculated and compared with traditional electrolyzer. In the zero-gap flow-through microfluidic reactor, 100 % of both tetracycline and norfloxacin can be decomposed in 15 min, and high mineralization rate were achieved under the optimized reaction condition. And the reaction was consistent with pseudo-first-order kinetics with k value of 0.492 cm-1 and 1.010 cm-1 , for tetracycline and norfloxacin, respectively. In addition, the energy consumption was 28.33 kWh ⋅ kg-1 TC and 8.36 kWh ⋅ kg-1 NOR, for tetracycline and norfloxacin, respectively, which was much lower than that of traditional electrolyzer. The LC-MS results showed that tetracycline underwent a series of demethylation, dehydration and deamination reactions, and the norfloxacin went through ring opening reaction, decarboxylation and hydroxylation reaction, and finally both produced CO2 and H2 O.

Development of SDS-Modified PbO2 Anode Material Based on Ti3+ Self-Doping Black TiO2NTs Substrate as a Conductive Interlayer for Enhanced Electrocatalytic Oxidation of Methylene Blue

Efficient and stable electrode materials are urgently required for wastewater treatment in the electrocatalytic degradation of toxic and refractory organic pollutants. Ti3+ self-doping black TiO2 nanotube arrays (Ti/B-TiO2-NTs) as an interlayer were used for preparing a novel PbO2 electrode via an electrochemical reduction technology, and a sodium dodecyl sulfate (SDS)-modified PbO2 catalytic layer was successfully achieved via an electrochemical deposition technology. The physicochemical characterization tests showed that the Ti/B-TiO2-NTs/PbO2-SDS electrodes have a denser surface and finer grain size with the introduction of Ti3+ in the interlayer of Ti/TiO2-NTs and the addition of SDS in the active layer of PbO2. The electrochemical characterization results showed that the Ti3+ self-doping black Ti/TiO2-NTs/PbO2-SDS electrode had higher oxygen evolution potential (2.11 V vs. SCE), higher electrode stability, smaller charge-transfer resistance (6.74 Ω cm-2), and higher hydroxyl radical production activity, leading to it possessing better electrocatalytic properties. The above results indicated that the physicochemical and electrochemical characterization of the PbO2 electrode were all enhanced significantly with the introduction of Ti3+ and SDS. Furthermore, the Ti/B-TiO2-NTs/PbO2-SDS electrodes displayed the best performance on the degradation of methylene blue (MB) in simulated wastewater via bulk electrolysis. The removal efficiency of MB and the chemical oxygen demand (COD) could reach about 99.7% and 80.6% under the optimal conditions after 120 min, respectively. The pseudo-first-order kinetic constant of the Ti/B-TiO2-NTs/PbO2-SDS electrode was 0.03956 min-1, which was approximately 3.18 times faster than that of the Ti/TiO2-NTs/PbO2 electrode (0.01254 min-1). In addition, the Ti/B-TiO2-NTs/PbO2-SDS electrodes showed excellent stability and reusability. The degradation mechanism of MB was explored via the experimental identification of intermediates. In summary, the Ti3+ self-doping black Ti/TiO2-NTs/PbO2-SDS electrode is a promising electrode in treating wastewater.

Nanotechnology-A Light of Hope for Combating Antibiotic Resistance

Antibiotic usage and resistance are major health concerns. Antibiotic resistance occurs when bacteria evolve to resist the effects of antibiotics, making it impossible to treat infections. The overuse and misuse of antibiotics are the main contributing factors, while environmental stress (such as heavy metals accumulation), unhygienic conditions, illiteracy, and unawareness also contribute to antibiotic resistance. The slow and costly development of new antibiotics has lagged behind the emergence of antibiotic-resistant bacteria, and the overuse of antibiotics leads to negative consequences. The current study used different literature resources to generate an opinion and find a possible solution to antibiotic barriers. Different scientific approaches have been reported to overcome antibiotic resistance. The most useful approach among these is nanotechnology. Nanoparticles can be engineered to disrupt bacterial cell walls or membranes, effectively eliminating resistant strains. Additionally, nanoscale devices enable the real-time monitoring of bacterial populations, allowing for the early detection of resistance emergence. Nanotechnology, along with evolutionary theory offers promising avenues in combating antibiotic resistance. Evolutionary theory helps us understand the mechanisms by which bacteria develop resistance, allowing us to anticipate and counteract their adaptive strategies. By studying the selective pressures that drive resistance, we can therefore design more effective interventions or traps. The synergy between the evolutionary theory and nanotechnology presents a powerful approach to combat antibiotic resistance, offering new avenues for the development of effective treatments and the preservation of our antibiotic arsenal.

Fabrication of a SnO2-Sb electrode with TiO2 nanotube array as the middle layer for efficient electrochemical oxidation of amaranth dye

Efficient, stable, and easily producible electrodes are useful for treating dye wastewater through electrochemical oxidation. In this study, an Sb-doped SnO₂ electrode with TiO₂ nanotubes as the middle layer (TiO₂-NTs/SnO₂-Sb) was prepared through an optimized electrodeposition process. Analyses of the coating morphology, crystal structure, chemical state, and electrochemical properties revealed that tightly packed TiO₂ clusters provided a larger surface area and more contact points, which is conducive to reinforcing the binding of SnO₂-Sb coatings. Compared with a Ti/SnO₂-Sb electrode without a TiO₂-NT interlayer, the catalytic activity and stability of the TiO₂-NTs/SnO₂-Sb electrode significantly improved (P < 0.05), as reflected by the 21.8% increase in the amaranth dye decolorization efficiency and 200% increase in the service life. The effects of current density, pH, electrolyte concentration, initial amaranth concentration, and the interaction between various combinations of parameters on the electrolysis performance were investigated. Based on response surface optimization, the maximum decolorization efficiency of the amaranth dye could reach 96.2% within 120 min under the following set of optimized parameter values: 50 mg L^-1 amaranth concentration, 20 mA cm^-2 current density, and 5.0 pH. A potential degradation mechanism of the amaranth dye was proposed based on the experimental results of a quenching test, ultraviolet-visible spectroscopy, and high-performance liquid chromatography-mass spectrometry. This study provides a more sustainable method for fabricating SnO₂-Sb electrodes with TiO₂-NT interlayers to treat refractory dye wastewater.

Preparation of Ti/SnO2-Sb/La-βPbO2 electrode and its application in the degradation of some pollutants including prednisolone and 8-Hydroxyquinoline

In this work, a novel La-doped βPbO₂ (Ti/SnO₂-Sb/La-βPbO₂) was prepared using electrodeposition method and applied to the degradation of prednisolone (PRD), 8-Hydroxyquinoline (8-HQ), and other typical organic pollutants. Compared with the conventional electrode Ti/SnO₂-Sb/βPbO₂, La₂O₃ doping enhanced oxygen evolution potential (OEP), reactive surface area, stability and repeatability of the electrode. The 10 g L^-1 of La₂O₃ doping exhibited the highest electrochemical oxidation capability of the electrode with [•OH]ss being determined at 5.6 × 10^-13 M. The quenching experiments were conducted to confirm the main oxidizing species (here: •OH) in the electrochemical process. The study showed that the pollutants were removed in the electrochemical (EC) process with different degradation rates and indicated that the second-order rate constant of organic pollutants towards •OH (k_OP,•OH) has a linear relationship with the degradation rate of organic pollutants (k_OP) in the electrochemical process. Another new finding in this work is that a regression line of k_OP,•OH and k_OP can be used to estimate k_OP,•OH of an organic chemical, which cannot be determined using the competition method. k_PRD,•OH and k_8-HQ,•OH were determined to be 7.4 × 10⁹ M^-1 s^-1 and (4.6-5.5) × 10⁹ M^-1 s^-1, respectively. Compared with conventional supporting electrolyte (like SO₄^2-), H₂PO₄^- and HPO₄^2- improved k_PRD and k_8-HQ by 1.3-1.6-fold, while SO₃^2- and HCO₃^- inhibited k_PRD and k_8-HQ significantly, down to 80%. Additionally, the degradation pathway of 8-HQ was proposed based on the detection of intermediates from GC-MS.

PbO2 materials for electrochemical environmental engineering: A review on synthesis and applications

Lead dioxide (PbO₂) materials have been widely employed in various fields such as batteries, electrochemical engineering, and more recently environmental engineering as anode materials, due to their unique physicochemical properties. Key performances of PbO₂ electrodes, such as energy efficiency and space-time yield, are influenced by morphological as well as compositional factors. Micro-nano structure regulation and decoration of metal/non-metal on PbO₂ is an outstanding technique to revamp its electrocatalytic activities and enhance environmental engineering efficiency. The aim of this review is to comprehensively summarize the recent research progress in the morphology control, the structure constructions, and the element doping of PbO₂ materials, further with many environmental application cases evaluated. Concerning electrochemical environmental engineering, the lead dioxide employed in chemical oxygen demand detection, ozone generators, and wastewater treatment has been comprehensively reviewed. In addition, the future research perspectives, challenges and the opportunities on PbO₂ materials for environmental applications are proposed.

Romo AI, Pudar S, Putnam ST, Bustos E, Rodríguez-López J. Real-Time Detection of Hydroxyl Radical Generated at Operating Electrodes via Redox-Active Adduct Formation Using Scanning Electrochemical Microscopy

The hydroxyl radical (•OH) is one of the most attractive reactive oxygen species due to its high oxidation power and its clean (photo)(electro)generation from water, leaving no residues and creating new prospects for efficient wastewater treatment and electrosynthesis. Unfortunately, in situ detection of •OH is challenging due to its short lifetime (few ns). Using lifetime-extending spin traps, such as 5,5-dimethyl-1-pyrroline N-oxide (DMPO) to generate the [DMPO-OH]• adduct in combination with electron spin resonance (ESR), allows unambiguous determination of its presence in solution. However, this method is cumbersome and lacks the necessary sensitivity and versatility to explore and quantify •OH generation dynamics at electrode surfaces in real time. Here, we identify that [DMPO-OH]• is redox-active with E0 = 0.85 V vs Ag|AgCl and can be conveniently detected on Au and C ultramicroelectrodes. Using scanning electrochemical microscopy (SECM), a four-electrode technique capable of collecting the freshly generated [DMPO-OH]• from near the electrode surface, we detected its generation in real time from operating electrodes. We also generated images of [DMPO-OH]• production and estimated and compared its generation efficiency at various electrodes (boron-doped diamond, tin oxide, titanium foil, glassy carbon, platinum, and lead oxide). Density functional calculations, ESR measurements, and bulk calibration using the Fenton reaction helped us unambiguously identify [DMPO-OH]• as the source of redox activity. We hope these findings will encourage the rapid, inexpensive, and quantitative detection of •OH for conducting informed explorations of its role in mediated oxidation processes at electrode surfaces for energy, environmental, and synthetic applications.

When MXene (Ti3C2Tx) meet Ti/PbO2: An improved electrocatalytic activity and stability

Stable electrode materials with high catalytic activity are urgently required for electrochemical degradation of refractory organic pollutants in wastewater treatment. Herein, high conductive MXene (Ti₃C₂T_x) was firstly fabricated by electrophoretic deposition (EPD) as an interlayer for preparing a novel PbO₂ electrode. The well-conducted Ti₃C₂T_x interlayer significantly improved the electrochemical performance of the EPD-2.0/PbO₂ (EPD time was 2.0 min) electrode with the charge transfer resistance decreased by 9.51 times, the inner active sites increased by 5.21 times and the ∙OH radicals generation ability enhanced by 4.07 times than the control EPD-0/PbO₂ anode. Consequently, the EPD-2.0/PbO₂ electrode achieved nearly 100% basic fuchsin (BF) and 86.78% COD removal efficiency after 3.0 h electrolysis. Therefore, this new PbO₂ electrode presented a promising potential for electrochemical degradation of BF and the new Ti₃C₂T_x middle layer could also be used to fabricate other efficient and stable anodes, such as SnO₂, MnO₂, TiO₂, etc.

Facile synthesis MnCo2O4.5@C nanospheres modifying PbO2 energy-saving electrode for zinc electrowinning

The oxygen evolution reaction kinetics in industrial zinc electrowinning is sluggish, resulting in low electrocatalytic activity and substantial energy expenditure (about one-third of energy was wasted due to the strong polarization effect). Herein, the paper described a core-shell structured MnCo₂O_4.5@C modified PbO₂ electrode through the pyrolysis and co-electrodeposition as a promising candidate for zinc electrowinning. As a result, the obtained Pb-0.2%Ag/α-PbO₂/β-PbO₂-MnCo₂O_4.5@C composite electrode showed a sandwich-like structure, where Pb-0.2%Ag as a core, α-PbO₂ as a mid-layer, and β-PbO₂-MnCo₂O_4.5@C served as an electrocatalytic layer. It also possessed improved OER catalytic activity, only required 680 mV to achieve a current density of 50 mA cm^-2 and a Tafel slope of 216.04 mV dec^-1 in an acidic solution containing 50 g L^-1 Zn²⁺ and 150 g L^-1 H₂SO₄. The current efficiency increased by 0.7% and the cell voltage reduced by 360 mV as compared to a conventional Pb-0.76%Ag alloy electrode, leading to a remarkable energy-consumption reduction of 283.5 kW h for producing per ton metallic zinc. Furthermore, Pb-0.2%Ag/α-PbO₂/β-PbO₂-MnCo₂O_4.5@C exhibited a prolonged service life, which worked about 44 h under an ultra-high current density of 2 A cm^-2. Hence, this paper provides the strategy to design and construct non-precious, high-performance catalyst for electrolysis and other applications.

Biochar and Hyperthermophiles as Additives Accelerate the Removal of Antibiotic Resistance Genes and Mobile Genetic Elements during Composting

Sewage treatment plants are known as repositories of antibiotic resistance genes (ARGs). Adding biochar and inoculating with exogenous microbial agents are common ways to improve the quality of compost. However, little is known about the effects of these exogenous additives on the fate of ARGs during composting and the related mechanisms. In this study, municipal sludge was taken as the research object to study the ARG-removal effects of four composting methods: ordinary compost (CT), compost with hyperthermophiles (HT), compost with hyperthermophiles and 2.0% biochar (HT2C) and compost with hyperthermophiles and 5.0% biochar (HT5C). Real-time quantitative PCR (qPCR) and 16S rRNA high-throughput sequencing were conducted to analyze the ARGs, MGEs and bacterial community. After composting, the abundance of ARGs in CT was reduced by 72.7%, while HT, HT2C and HT5C were reduced by 80.7%, 84.3% and 84.8%, respectively. Treatments with different proportions of biochar added (HT2C, HT5C) had no significant effect on the abundance of ARGs. Network analysis showed that Firmicutes and Nitrospirae were positively associated with most ARGs and may be potential hosts for them. In addition, redundancy analysis further showed that the class 1 integrase gene (intI1), pH and organic carbon had a greater effect on ARGs. Our findings suggested that the combination of hyperthermophiles and biochar during the composting process was an effective way to control ARGs and mobile genetic elements (MGEs), thus inhibiting the spread and diffusion of ARGs in the environment and improving the efficiency of treating human and animal diseases.