Multi-wavelength spectrophotometric determination of peracetic acid and the coexistent hydrogen peroxide via oxidative coloration of ABTS with the assistance of Fe2+ and KI

Activation of periodate by ABTS as an electron shuttle for degradation of aqueous organic pollutants and enhancement effect of phosphate

Periodate (PI) based advanced oxidation processes (AOPs) have recently attracted much attention due to their high application potential in water purification through production of reactive species. In the study, 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) was used as a representative electron shuttle, and its reaction with PI was investigated in detail. It was found that PI can be activated by ABTS via one-electron transfer to produce ABTS•+ and IO3•, cooperatively promoting oxidation of organic contaminants such as bisphenol A (BPA). Their contribution in BPA oxidation at pH 7 was estimated as 81.9% and 18.1%, respectively. With phosphate, BPA oxidation rate in the PI/ABTS process increased linearly with raised phosphate concentrations from 0 to 10 mM. The enhancement effect of phosphate is attributed to formation of PI-phosphate complexes, which facilitate PI activation by ABTS, and production of more ABTS•+ and IO3•, and additional phosphate radicals. Accordingly, the contribution of IO3• and phosphate radicals in BPA oxidation raised to 57.7% in the process with 4 mM phosphate, while that of ABTS•+ decreased to 42.3%. The reaction stoichiometry ratio of ABTS to PI was measured as 1.1 at pH 7, suggesting the little involvement of IO3• and phosphate radicals in production of ABTS•+ due to their high self-quenching. The PI/ABTS process exhibited excellent anti-interference capacity towards water matrix components (e.g. Cl-, HCO3- and natural organic matters). Moreover, an immobilized ABTS (ABTS/ZnAl-LDH) was successfully developed as a heterogeneous electron shuttle for PI oxidation, which resultantly exhibited the good catalytic activity and stability in degradation of BPA, further improving feasibility of the process in treatment of actual water. This work advances understanding on reaction of PI with ABTS from stoichiometric and kinetic aspects, and provides a high performance AOP for selective oxidation of trace organic contaminants.

ABTS as Both Activator and Electron Shuttle to Activate Persulfate for Diclofenac Degradation: Formation and Contributions of ABTS•+, SO4•-, and •OH

The activation of peroxydisulfate (PDS) by organic compounds has attracted increasing attention. However, some inherent drawbacks including quick activator decomposition and poor anti-interference capacity limited the application of organic compound-activated PDS. It was interestingly found that 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonate) (ABTS) could act as both activator and electron shuttle for PDS activation to enhance diclofenac (DCF) degradation over a pH range of 2.0-11.0. Multiple reactive species of ABTS•+, •OH, and SO4•- were generated in the PDS/ABTS system, while only ABTS•+ and •OH directly contributed to DCF degradation. ABTS•+, generated via the reactions of ABTS with PDS, SO4•-, and •OH, was the dominant reactive species of DCF degradation. No significant decomposition of ABTS was observed in the PDS/ABTS system, and ABTS acted as both activator and electron shuttle. Four possible degradation pathways of DCF were proposed, and the toxicity of DCF decreased after treatment with the PDS/ABTS system. The PDS/ABTS system had good anti-interference capacity to common natural water constituents. Additionally, ABTS was encapsulated into cellulose to obtain ABTS@Ce beads, and the PDS/ABTS@Ce system possessed excellent performance on DCF degradation. This study proposes a new perspective to reconsider the mechanism of activating PDS with organic compounds and highlights the considerable contribution of organic radicals on contaminant removal.

A new lysosome-targeted fluorescent probe for hydrogen peroxide based on a benzothiazole derivative

As an important member of reactive oxygen species, hydrogen peroxide (H2O2) plays a key role in oxidative stress and cell signaling. Abnormal levels of H2O2 in lysosomes can induce damage or even loss of lysosomal function, leading to certain diseases. Therefore, real-time monitoring of H2O2 in lysosomes is very important. In this work, we designed and synthesized a novel lysosome-targeted fluorescent probe for H2O2-specific detection based on a benzothiazole derivative. A morpholine group was used as a lysosome-targeted unit and a boric acid ester was chosen as the reaction site. In the absence of H2O2, the probe exhibited very weak fluorescence. In the presence of H2O2, the probe showed an increased fluorescence emission. The fluorescence intensity of the probe for H2O2 displayed a good linear relationship in the concentration range of H2O2 from 8.0 × 10-7 to 2.0 × 10-4 mol·L-1. The detection limit was estimated to be 4.6 × 10-7 mol·L-1 for H2O2. The probe possessed high selectivity, good sensitivity and short response time for the detection of H2O2. Moreover, the probe had almost no cytotoxicity and had been successfully applied to confocal imaging of H2O2 in lysosomes of A549 cells. These results illustrated that the developed fluorescent probe in this study could provide a good tool for the determination of H2O2 in lysosomes.

Photometric determination of peracetic acid by reaction with potassium iodide solution

Peracetic acid (PAA) is a strong oxidizing agent and is considered an ideal disinfectant because of its excellent disinfecting effect at low concentration, low corrosiveness, and relatively low cost. Commercially available PAA solution is a mixture of PAA, acetic acid, and hydrogen peroxide. However, PAA naturally decomposes faster than hydrogen peroxide. Therefore, accurately quantifying the concentration of PAA in the PAA peroxide mixture via a simple method is important. In the present study, a new method was developed, in which the spectral change of I^- ion at 226 nm and the absorption value from the generated I₂ at 460 nm were used to determine the concentration of PAA, following a chemical reaction with 0.1 mM potassium iodide (KI) solution without the use of any other chemicals. In this work, the measurable concentration of PAA was as low as 0.0001 wt% (13.1 µM) and as high as 0.0015 wt% (197.2 µM), which matches well with high linearity (99.95% at 226 nm and 99.91% at 460 nm). This work could also be the high selectivity method toward PAA in the PAA peroxide mixture.

Graphene shell-encapsulated copper-based nanoparticles (G@Cu-NPs) effectively activate peracetic acid for elimination of sulfamethazine in water under neutral condition

In this study, a graphene shell-encapsulated copper-based nanoparticles (G@Cu-NPs) was prepared and employed for peracetic acid (PAA) activation. The characterization of G@Cu-NPs confirmed that the as-prepared material was composed of Cu⁰ and Cu₂O inside and encapsulated by a graphene shell. Experimental results suggested that the synthesized G@Cu-NPs could activate PAA to generate free radicals for efficiently removing sulfamethazine (SMT) under neutral condition. The formation of graphene shells could strongly facilitated electron transfer from the core to the surface. Radical quenching experiments and electron spin resonance (ESR) analysis confirmed that organic radicals (R-O•) and hydroxyl radicals (•OH) were generated in the G@Cu-NPs/PAA system, and R-O• (including CH₃CO₃• and CH₃CO₂•) was the main contributor to the elimination of SMT. The possible SMT degradation pathways and mechanisms were proposed, and the toxicity of SMT and its intermediates was predicted with the quantitative structure-activity relationship (QSAR) analysis. Besides, the effects of some key parameters, common anions, and humic acid (HA) on the removal of SMT in the G@Cu-NPs/PAA system were also investigated. Finally, the applicability of G@Cu-NPs/PAA system was explored, showing that the G@Cu-NPs/PAA system possessed satisfactory adaptability to treat different water bodies with admirable reusability and stability.